Quick Selection Guide Signal Connectors M23 Coupling ayonet Coupling CONINVERS Edition 03/02
Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 Number of Contacts (View: mating face) Contact inserts male (pin) P 06 6 Positions 07 7 Positions 09 9 Positions (8+) 63 9 Positions (6+3) 2 2 Positions 2R 2 Pos. ( + PE) 6 6 Positions 7 7 Positions 9 9 Pos. (6 + 3) R Style of Contacts 9 Pos. (6 + 2 + PE) Contact inserts female (socket) S RC/UC/ TU- 2 S N 2 2 2 Pin Contact Insert Numbering Contact Insert Coding Socket The standard coding is "N". Other coding options available on request. Not all codings are available for all No. of positions. Insert with pin contacts numbering clockwise (mating face) Insert with socket contacts numbering counter clockwise (mating face) Insert with pin contacts numbering counter clockwise (mating face) Insert with socket contacts numbering clockwise (mating face) Contact Terminations Standard Versions 2 =Solder Cup 8 =Crimp Style (up to 7 pos./ up to 0,75 mm 2 ) R =Crimp Style (6-9 pos./ up to,0 mm 2 ) S2 =Screw Style (6, 7, 9 pos.) 22 =Dip Solder 32 (PC mounting) 2 for receptacles C2 in various lengths 42 =IP67 unmated K2 (2 pos. only) N2 L2 Other on Request The first 7 digits out of the digit part number define the contact insert. This applies for RC, UC and TU connector series. RC/UC/TU-Series Inserts Defining the Insert of Connectors
Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 4F00 4E00 4Z00 4D00 Vibration brake (CuZn only) With gasket, 4 threads M2,5, GD-Zn With gasket, 4 threads M3, GD-Zn With o-ring, 4 threads M2,5, GD-Zn With o-ring, 4 threads M3, GD-Zn 5000 With gasket, 4 holes Ø 2,7 mm, CuZn 500 With gasket, 4 holes Ø 3,2 mm, CuZn 5200 With o-ring, 4 holes Ø 2,7 mm, CuZn 5300 With o-ring, 4 holes Ø 3,2 mm, CuZn 5F00 With gasket, 4 holes Ø 2,7 mm, GD-Zn 5E00 With gasket, 4 holes Ø 3,2 mm, GD-Zn 5Z00 With o-ring, 4 holes Ø 2,7 mm, GD-Zn 5D00 With o-ring, 4 holes Ø 3,2 mm, GD-Zn RC - 2 3 0 0 Receptacle round flange, rear mounting, H000 O-ring axial Receptacle square flange, front mounting, mm gasket Receptacle square flange, rear mounting, Shell material CuZn / GD-Zn * 4000 With gasket, 4 threads M2,5, CuZn 400 With gasket, 4 threads M3, CuZn fig. 4200 With o-ring, 4 threads M2,5, CuZn 4300 With o-ring, 4 threads M3, CuZn fig. fig. fig. Shell material CuZn / GD-Zn * 2200 With gasket, 4 holes Ø 2,7 mm, CuZn 2300 With gasket, 4 holes Ø 3,2 mm, CuZn 2K00 2S00 Vibration brake (CuZn only) With gasket, 4 holes Ø 2,7 mm, GD-Zn With gasket, 4 holes Ø 3,2 mm, GD-Zn,5 mm sealing ring Coding channel 8,9 fig. fig. Receptacle round flange, front mounting, 6000 With hex. nut and gasket, threading 6 mm length 6R00 With hex. nut and gasket, threading 0 mm length fig. 600 With hex. nut and o-ring, threading 6 mm length 6300 With threading only PG3,5 6 mm length fig. * Contact insert can not be disassembled (shell material GD-Zn only) Y200 Y300 YR00 YF00 WQ00 WR00 WS00 WT00 Gasket mm Receptacle square flange, front mounting With gasket, 4 holes Ø 2,7 mm With gasket, 4 holes Ø 3,2 mm With o-ring radial, 4 holes Ø 3,2 mm With o-ring axial, 4 holes Ø 3,2 mm fig. fig. Receptacle square flange, front mounting With o-ring radial, 4 holes Ø 2,7 mm With o-ring radial, 4 holes Ø 3,2 mm With o-ring axial, 4 holes Ø 2,7 mm With o-ring axial, 4 holes Ø 3,2 mm fig. fig. radial axial The last 4 digits out of the digit part number define the body style. M23 RC-Series Receptacles Defining the Shell Style of Connectors
Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 80 max 0,5 mm cable dia., IP 67 90 Cable connecting receptacle with integrated cable gland, max 0,5 mm cable dia., IP 67, fits into connector with coupling nut radial mm Gasket max 0,5 mm cable dia., IP 67, for rear mounting to use as a receptacle C0 With gasket, 4 threads M2,5 C With gasket, 4 threads M3 C2 With o-ring, 4 threads M2,5 C3 With o-ring, 4 threads M3 RC - 8 0 4 9 Q0 T0 max 0,5 mm cable dia., IP 67, for rear mounting to use as a receptacle max 0,5 mm cable dia., IP 67 Example for determining D, d Outside diameter of cable = D Diameter between cable bundle and the braiding = d D = D + 2 mm (approx.) Regarding the RC shielded connectors, the EMI accessories are defined by the last two digits as shown in the matrix below. This is not applicable to the UC / TU series. 2,5 3,2 3,6 3,8 4, 4,3 4,6 4,9 5,2 5,5 5,8 6,2 6,6 7,0 7,4 7,7 4,0 5,0 d Washer d = Shielding sleeve inner dia. Dimensions in mm Cable outer dia. = D D = Sealing ring inner dia. 6,0 7,5 8,5 0,0,0 NR Univ. FPM Univ. 53 57 E7 H M 58 50 U7 H M 7 59 60 V7 HC MC 6 62 Q5 99 HD MD 54 56 P5 J8 HE ME W7 X9 Y9 Z9 HF MF X7 55 03 P8 HG MG J9 G6 P6 HH MH 63 64 05 HJ MJ 84 49 04 JC HK MK H7 N8 07 E6 HL ML G5 NY Q6 HM MM Q8 06 V5 HN MN 52 L6 HP MP 5 Q9 HQ MQ 98 J0 HR MR Universal type: shielding disc / universal sealing ring for cable dia. up to 9,5 mm = EP The last 4 digits out of the digit part number define the body style. M23 RC-Series Shielded Defining the Shell Style of Connectors
Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 Z400 Z500 Z600 Z700 G400 G500 G600 G700 Cable connector with standard cable gland, PG 7 to PG 3,5 Receptacle, rear mounting, with standard cable gland, PG 7 to PG 3,5 Cable connecting receptacle with standard cable gland, PG 7 to PG 3,5 7400 7500 7600 7700 RC - L 0 0 ZH00 ZI00 ZK00 ZL00 GH00 GI00 GK00 GL00 7H00 7I00 7K00 7L00 Cable connector with IP 68 cable gland, PG 7 to PG 3,5 Receptacle, rear mounting, with IP 68 cable gland, PG 7 to PG 3,5 Cable connecting receptacle with IP 68 cable gland, PG 7 to PG 3,5 Cable connector with standard cable gland, PG 7 to PG 3,5 400 500 600 700 H00 I00 K00 L00 Cable connector with IP 68 cable gland, PG 7 to PG 3,5 Further cable glands and metric threadings available on request The last 4 digits out of the digit part number define the body style. M23 RC-Series Unshielded Defining the Shell Style of Connectors
Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 Q0DU Q3DU QNDU F3DU FNDU Receptacle, rear mounting, with integrated cable gland, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 Receptacle (long version), rear mounting, with additional strain relief, Pg 3,5 or Pg 6, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 PG 3,5 cable entry 0-3,5 mm dia. PG 6 cable entry 2-4,5 mm dia. Cable connecting receptacle (long version), with additional strain relief, Pg 3,5 or Pg 6, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 PG 3,5 cable entry 0-3,5 mm dia. PG 6 cable entry 2-4,5 mm dia. Please order cable glands (IP 68 / double lever strain relief) separately UC - 8 0 D U 90DU 80DU R3DU RNDU Cable connecting receptacle with integrated cable gland, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 Cable connector (long version), with additional strain relief, Pg 3,5 or Pg 6, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 PG 3,5 cable entry 0-3,5 mm dia. PG 6 cable entry 2-4,5 mm dia. T0DU N3DU NNDU universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 Cable connector (long version), with additional strain relief, Pg 3,5 or Pg 6, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 PG 3,5 cable entry 0-3,5 mm dia. PG 6 cable entry 2-4,5 mm dia. Further cable glands and metric threadings available on request The last 4 digits out of the digit part number define the body style. M23 UC-Series Shielded Defining the Shell Style of Connectors
Signal Connectors M23 ayonet Quick Selection Guide Edition 03/02 mm gasket Receptacle with bayonet coupling, square flange, rear mounting 400 With gasket, 4 threads M3 4300 With o-ring, 4 threads M3 500 With gasket, 4 holes Ø 3,2 mm 5300 With o-ring, 4 holes Ø 3,2 mm W00 axial Receptacle with bayonet coupling, square flange, front mounting With o-ring, 4 holes Ø 3,2 mm fig. fig. TU - 8 U D U mm gasket 9UDU Cable connecting receptacle with bayonet coupling, integrated cable gland, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 8UDU TUDU Cable connector with bayonet coupling, integrated cable gland, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 Cable connector with bayonet coupling, integrated cable gland, universal shielding, enlarged cable entry up to 4,5 mm dia., IP 67 The last 4 digits out of the digit part number define the body style. ayonet TU-Series Shielded Defining the Shell Style of Connectors
RC/UC/TU-Series Technical Data Mechanical Data Shell material Machined component by Copper-Zinc alloy (CuZn), die cast component by Zinc (GD-Zn) Shell plating Nickel (standard), on request: black chromated, plastic molded Insulator/flammability Thermoplastic Polyester (PT), Polyamid (P 66), Polycarbonat (PC)/UL 94 V0 Contact material Copper-Zinc alloy (CuZn) Contact plating Nickel (Ni) with Gold (u) and passivated Contact termination Solder cup, dip solder, crimp type, screw type Seal and Fluor rubber (FPM) Gasket Perbunan (NR-stiffened gasket), Fluor rubber (FPM) Temperature range -40 C/+25 C (long term temperature) Cable entry RC-Series EMI version: outer dia. of cable 2-0,5 mm, without EMI protection: outer dia. of cable 4-4 mm Cable entry UC/TU-Series EMI version: outer dia. of cable 2-4,5 mm Mating method Mating cycles mechan. RC/UC-Series: threaded coupling M23; TU-Series: bayonet coupling Standard: 50, higher on request Protection class IP 67 mated, for EMI versions IP 65 - IP 68 mated, being subject to cable gland used, for versions without EMI protection pproval RC-Series UL-recognized File No 53698 (M) Underwriters Laboratories Inc. Electrical Data Number of positions 6, 7 9(8+) 9(6+3) 2 6 7 9(6+3) 2(+PE) 6(5+PE) 7(6+PE) 9(6+2+PE) 2 Hybrid Contact 6, 7 8 + 6 + 3, 2 5, 6 6, 7 6 + 3 Contact dia. (mm) 2 2 2,5 Rated current () 20 8 20 8 20 8 8 8 8 0 Rated voltage (V C eff. / DC) 250 50 50 50 50 50 50 Test voltage (kv C) 2,5,5,5,5,5,5,5 Overvoltage category ) II II II II II II II Insulation resistance (Ω) 0 6 0 6 0 2 0 2 0 2 0 2 0 2 Contact resistance (mω) 3 3 3 3 3 3 3 Pollution degree acc. to IEC 664-2 (3 ) 2 (3 ) 2 (3 ) 2 (3 ) 2 (3 ) 2 (3 ) 2 (3 ) ) Reference: DIN EN 6984:200 Fax to: +49 (0)70 32/92 74-330 We desire a technical consultation regarding the products: Description Part No. Description Part No. Description Part No. Description Part No. Please send us the CONINVERS Short Form Catalog Contact Person Company Zip, City Phone/Fax Dept. Street E-mail D-0009-02 www.coninvers.com info@coninvers.com Heisenbergstr. D-7083 Herrenberg Tel. +49 (0) 70 32/92 74-0 Fax +49 (0)70 32/92 74-330