s Flow Meters & Controls ECO FLOMAG i M A G S e r i e s o M o vi n g P a r t N NSF Certified to NSF/ANSI 61 FEATURES Easy setup Minimal straight pipe Mounted or remote rate & total Tamper-evident seal NSF-61 approved IP68 rated 9 1 : 2 8 ISO CERTIFIED COMPANY THE RIGHT METER FOR Water & wastewater Municipal Treatment plants Pump stations Packaged plants Filtration systems PROUDLY MADE IN THE USA
GENERAL INFORMATION The imag-series is the most economical flanged electromagnetic flowmeter on the market. It is used in 3 to 12 pipe in municipal or industrial water, wastewater, pump stations and packaged plant applications. The imag has no moving parts and electrodes are designed to discourage fouling. This magmeter requires no maintenance in applications where debris would impede mechanical meters. There are no parts to wear out. Minimal straight pipe requirements allow imag-series meters to be used in piping configurations where there is little space between the meter and an elbow. imag-series meters are rated IP68 for applications where the meter may be under water up to a depth of 1 feet (3 meters) for prolonged periods of time. Rate and total indication are standard. Rate and total units and pulse output are settable via the front panel touch key pad by the user. The imag can be externally powered with 9-36 Vdc at 3 ma. The standard 2-foot (6 meter) cable also provides outputs for use with a variety of Seametrics and other displays and controls for remote reading, data logging and telemetry applications. 4-2mA passive current loop and high frequency outputs are optional. The imag 36 remote display meter can be supplied with an optional internal AC power supply. FEATURES Multifunction Display Light Sensor Keypad Protective Cover with Magnetic Seal
FEATURES Continued Rate and total indicator Security seal & cross-drilled screws (2) for tamper-evidence Power/Output cable port access, tamper-sealed Powder-coated ductile cast iron body & electronics housing Glass filled molded plastic liner 316SS electrodes Flanges, 15 lb. ANSI pattern Equalization lug imag 46-3 Rate and total indicator with protective cover and keypad sensors Powder-coated ductile cast iron electronics housing Security seal & cross-drilled screws (2) for tamper-evidence Power/Output cable port access Flanges, 15 lb. ANSI pattern Equalization lug 316SS electrodes Santoprene/Polypropylene Liner Welded steel epoxy-coated flow tube imag 36-4 (Remote indicator) imag 46-4
SPECIFICATIONS* Pipe Sizes 3,4, 6, 8, 1,12 Flanges Pressure 15 lb. ANSI pattern 15 psi (1.3 bar) working pressure Temperature Operating 1 to 13 F (-12 to 54 C) Accuracy Low Flow Cutoff Storage -4 to 158 F (-4 to 7 C) +/- 1% of reading +/-.4% of full-scale flow from low flow cutoff to maximum flow rate of 1 m/sec.5% of maximum flow rate Materials Body (3 Only) Ductile cast iron, powder-coated w/nsf61 listed epoxy powder Body (4-12 ) Liner (3 Only) Liner (4-12 ) Electronics Housing Electrodes O-ring (3 Only) Welded steel, epoxy-coated Noryl Santoprene/Polypropylene Ductile cast iron, powder-coated 316 stainless steel EPDM Display Type 128x64 dot-matrix LCD Digits 5 Digit Rate 8 Digit Total Units Rate Volume Units Rate Time Units Total Volume Units Gallons Liters Cubic Feet Cubic Meters Million Gallons Mega Liters Imperial Gallons Million Imperial Gallons Second Minute Hour Day Gallons Gallons x 1 Million Gallons Liters Liters x 1 Mega Liters Cubic Meters Cubic Meters x 1 Cubic Feet Cubic Feet x 1 Imperial Gallons Imperial Gallons x 1 Million Imperial Gallons Power DC Power 9-36 Vdc @ 25 ma max, 3 ma average AC Power 1 85-264Vac, 5/6Hz,.12A Telemetry Output 3.3V asynchronous receive and transmit (UART) signals, ASCII command-response protocol Pulse Frequency Signal Current sinking pulse, isolated, 36 Vdc at 1 ma max Output Pulse Rates User-settable volume units/pulse. Pulse width is one-half of pulse period, 2 pulses/sec max Options 4-2mA Current Loop Isolated, passive, 6-36Vdc, +/-.1% of pulse/frequency output HART compliant 2 Digital Output Isolated, open collector, 36Vdc @ 1mA max., frequency output up to 1kHz Relay Output Solid state relay, normally open, non-polarized, 28Vac/4Vdc @.5A max, 33Hz max Serial Communications 2 Isolated, asynchronous serial RS485 or RS232, Modbus RTU protocol Cable Control Cable Six-conductor water-blocked cable, polyurethane jacket, 2ft (6m) standard length for power, pulse frequency or optional outputs. Optional lengths up to 1 available Remote Display Cable (imag 36) 3ft (9m) standard length may be shortened (by user in the field). Additional cable can be ordered and attached with the use of a junction box (purchased from a standard supplier) up to 1ft (3m) total Conductivity >2 microsiemens/cm Empty Pipe Detection Hardware/software, conductivity-based Regulatory (EN 61326) pending, NSF-61 Environmental IP68 to 1ft (3m) depth *Specifications subject to change. Please consult our website for the most current data (www.seametrics.com). 1 imag36 only, imag46 requires external AC power supply 2 Available Q2 214
DIMENSIONS imag46-3 Shown T (Metal Flange) H ID L (Including Rubber Gaskets) imag36 Remote Shown.2 Dia. 5.62 2.5 3 5.27 4.38 imag46-4 to 12 Shown H T (Metal Flange) ID L (Including Rubber Gaskets)
imag Dimensions imag Meter Size 3 4 6 8 1 12 L inch mm 12. 35 1.24 26 12.27 312 14.24 362 18.18 462 19.68 5 H inch mm 6.8 173 8.12 26 9.22 234 1.22 26 11.22 285 12.28 312 T inch mm.68 17.3.62 2.9.69 23.3.69 23.3.69 23.3.81 2.6 inch ID mm 2.6 66.4 3.12 79.25 5.5 128.27 6.44 163.58 8.61 218.69 1.55 267.97 Shipping Weight pounds Kg 41 19 35 16 5 23 72 33 128 58 17 78 Flanges Standard ANSI 15 lb. drilling pattern Cable 1 lb. FLOW RANGE (3-12 ) Pipe Size (Inches in diameter) Max Flow Velocity (Meters/Second) Max Flow Rate (Gallons/Minute) Max Flow Rate (Liters/Second) Turn Down Flow Rate (Gallons/Minute) Turn Down Flow Rate (Liters/Second) 3 4 6 8 1 12 1 1 1 1 1 1 723 1285 2891 514 831 11565 46 81 182 324 57 73 3.62 6.43 14.46 25.7 4.15 57.82.23.41.91 1.62 2.54 3.65 5 imag Accuracy 4 Accuracy (%) 3 2 1 2 4 6 8 1 2 4 6 8 1 (m/s) 5 1 15 2 25 3 5 1 15 2 25 3 33 (ft/s) Flow Velocity
OUTPUT CAPABILITIES Remote Data Logger Compatible *Telemetry (Available Soon) Telemetry Remote Data Logger imag imag STRAIGHT PIPE RECOMMENDATIONS (X = pipe diameter) 2X imag - 3 1X Minimal straight pipe required between elbows. For other piping configurations, consult factory. FLOW (X = pipe diameter) imag - 4 to 12 2X 1X FLOW
ECO FLOMAG HOW TO ORDER imag 36-1 2 3 4 5 - - - - i M A G S e r i e s imag 46 - - - - Size Flange/Fitting imag 36 (Remote Indicator) Options imag 36 Power and Communications Power/Output Cable 1 2 3 4 5 Sensor Cable -3 3 -F1 ANSI 15# -ADDX AC Power, 1 Digital Output - No Cable -9 9 meter (3 ) -4 4-6 6-8 8-1 1 -F2 Metric 1 -ADLX -APLX -APTX -ARRX -DDDX AC Power, Current Loop, Digital Output AC Power, Pulse, Current Loop AC Power, Pulse, Telemetry DC Power, 1 Relay Output DC Power, 1 Digital Output -6 6 meter (2 ) -1 1 meter (3 ) -2 2 meter (66 ) -3 3 meter (1 ) -2 2 meter (66 ) -3 3 meter (1 ) -12 12 -DDLX DC Power, Current Loop, Digital Output -DPLX DC Power, Pulse, Current Loop -DPTX DC Power, Pulse, Telemetry -DRRX DC Power, 1 Relay Output Size imag 46 (Internal Indicator) Options Flange/Fitting imag 36 Power and Communications Power/Output Cable 1 2 3 4-3 3 -F1 ANSI 15# -DDDX DC Power, 1 Digital Output -6 6 meter (2 ) -4 4 -F2 Metric 1 -DDLX DC Power, Current Loop, Digital Output -1 1 meter (3 ) -6 6 -DPLX DC Power, Pulse, Current Loop -2 2 meter (66 ) -8 8 -DPTX DC Power, Pulse, Telemetry -3 3 meter (1 ) -1 1 -DRRX DC Power, 1 Relay Output -12 12 1 Available Soon CONTACT YOUR SUPPLIER Specialists in Valves, Controls, Pneumatics, Fluid Measurement