3.0 Chapter-Content Page 3.0 Overview 2 3.1 FO-Through-Adapter 4 3.2 FO-Patch Cords 6 3.3 FO-Splice Modules and Accessories 8 3.4 FO-Splice Trays 10 3.5 FO-Wall Outlets 12 3.6 FO-Indoor Distributors 13 3.7 FO-Outdoor Distributors 15 3.8 FO-System Distributor N 16 3.9 FO-PROFIL-System Distributors 17 3.10 FO-Assemblies 19 23 3 http://www.krone-gmbh.at - Page 1
3.0 Technical Data, How to order MT-RJ Dimensions in mm Panel thickness Mounting E2000-through adapter E2000-connector (hole) Panel thickness Mounting ST-through adapter ST-connector (hole) Panel thickness Mounting FC-through adapter (SF) FC-connector (hole) FC-through adapter (RF) Wall Mounting (hole) thickness Panel thickness Mounting SC-through adapter SC-connector (hole) Panel thickness Mounting Duplex-SC- Duplex-SC-connector (hole) through adapter MTRJ-through adpter with Keystone adapter MTRJ-connector Panel thickness Mounting (hole) LC-connector How to order MT-RJ 7023 1 02 - Connectors / Cable type: Hybridpatchcord: Cable 2 x 1,8 mm 1 MT-RJ - SC / MM GI50/125 µm 2 MT-RJ - ST / MM GI50/125 µm 4 MT-RJ - SC / MM Gl62,5/125 µm 5 MT-RJ - ST / MM Gl62,5/125 µm Connectors / Cable type: Patchcord: Cable 2 x 1,8 mm 0 MT-RJ / MM GI50/125 µm 3 MT-RJ / MM Gl62,5/125 µm Pigtail: Fibre 2 x 0,65 mm 8 MT-RJ / MM GI50/125 µm 9 MT-RJ / MM Gl62,5/125 µm Length: 01-1 m 08-8 m 02-2 m 10-10 m 03-3 m 15-15 m 04-4 m 20-20 m 05-5 m 3 - Page 2 http://www.krone-gmbh.at 23
3.0 How to Order, Technical Data 7006 Cable type: 1 SM 9 µm 2 MM 50 µm 3 MM 62.5 µm 4 SM 9 µm / -20 to 80ºC 5 SM 9 µm / -40 to 85ºC Example : FO Patch cable, duplex, 2 x 3 mm FC-PC connector and SC-PC connector with 2 m length => 7006 1 521 12 Cable: 1 Fibre 0.9 mm 2 Cable 3 mm 3 Cable 2.4 mm 5 Duplex cable 2 x 3 mm 6 Cable 1.8 mm 7 Cable 2 x 1.8 mm Connectors 1 and 2: 1 SC 2 FC 3 DIN 4 E2000 5 ST 6 KRONE SC 7 Duplex SC 8 LC 0 no 2nd Connector (Pigtail) Polishing: 1 PC 2 SPC 3 APC 8º 4 APC 9º 5 UPC Length: 1 1 m 2 2 m 3 3 m 4 4 m 5 5 m 6 8 m 7 10 m 8 15 m 9 20 m Technical Data Connector FC SC E 2000 Housing: Zinc diecasting Brass Plastic Plastic (Ni galvanized (Ni plated) Ferrule: Zirconia ceramic Zirconia ceramic Zirconia ceramic Zirconia ceramic ST TM Insertion loss: < 0.5 db < 0.5 db < 0.5 db < 0.5 db Return loss: not specified for MM PC-polishing > 27 db > 27 db SPC-polishing > 40 db > 40 db > 40 db APC-polishing > 60 db > 60 db > 60 db Operating temperature: -25 +70 C Tensile strength: 100 N for cable 100 N for cable 70 N for cable 100 N for cable Durability : 500 1000 1000 1000 Standard application: MM SM SM SM Through adapter type FC SC E 2000 Housing Zinc diecasting Brass Plastic Plastic (Ni galvanized) (Ni plated) Sleeve Ceramics Plastic Phosphor bronze Phosphor bronze Ceramics Insertion loss Master/master < 0.1 db < 0.1 db Offset of the inner diameter of the sleeve: < 5 µm < 5 µm < 5 µm Sleeve diameter 2,499 mm ±0,5 µm 2.499 mm ±0.5 µm 2.499 mm ±0.5 µm 2.499 mm ±0.5 µm Operating temperature: -40 +85 C -25 +70 C -40 +85 C -40 +85 C -25 +70 C Durability 1000 500 1000 1000 1000 Standard application MM MM SM SM SM 23 3 ST TM http://www.krone-gmbh.at - Page 3
3.1 FO-Through-Adapters FO-Through-Adapters Order No. FO-through-adapters E2000 Pack 6824 2 300-18 FO-through-adapter E2000/PC, SM, colour: blue 6824 2 300-20 FO-through-adapter E2000/APC, SM, colour: green Adapter housing made of plastic with ceramic sleeve. Can be fitted in a housing wall either with 2 M2 screws (for wall thickness of up to 12mm) or with the snap-in clip (for wall thickness of up to 1.8mm) on the housing of the adapter. Order No. FO-through-adapters ST Pack 6824 2 300-08 FO-through-adapter ST, MM 6824 2 300-09 FO-through-adapter ST, SM Adapter housing made of brass, with a phosphor-bronze sleeve (MM), ceramic sleeve (SM). Can be fitted in a housing wall with a coupling ring. Order No. FO-through-adapters FC Pack 6824 2 300-04 FO-through-adapter FC/PC (SF),MM 6824 2 300-06 FO-through-adapter FC/APC(SF),SM Adapter housing made of brass (nickel plated) with ceramic sleeve. Can be fitted in a housing wall either with 2 M2 screws (not included) 6824 2 300-12 FO-through-adapter FC/PC (RF),MM 6824 2 300-47 FO-through-adapter FC/APC(RF),SM Adapter housing made of brass (nickel plated) with ceramic sleeve. Can be fitted in a housing wall with a coupling ring. Order No. FO-through-adapters SC Pack 6824 2 300-00 FO-through-adapter SC/PC, SM colour: blue 6824 2 300-02 FO-through-adapter SC/APC, SM colour: green Adapter housing made of plastic with ceramic sleeve. Can be fitted in a housing wall either with 2 M2 screws (for wall thickness of up to 12mm) or with the snap-in clip (for wall thickness of up to 1.8mm) on the housing of the adapter. Order No. FO-through-adapters SC/PC Pack 6824 2 215-00 FO-through-adapter SC/PC, MM colour: beige FO through-adapter for SC-MM multi-mode connectors. The throughadapter housing is made of plastic with a phosphor bronze sleeve. 3 - Page 4 http://www.krone-gmbh.at 23
FO Through-Adapters 3.1 FO-Through-Adapters Order No. FO-through adapters SC/SPC Pack 6824 2 300-35 FO-through adapter SC/PC duplex, MM, colour: beige 6824 2 300-41 FO-through adapter SC/PC duplex, SM, colour: blue Adapter housing made of plastic with phosphor bronze sleeve. Can be fitted in a housing wall either with 2 M2 screws (not included) or with the Snap-In-clips. Order No. FO-through-adapters MTRJ Pack 7023 1 030-00 FO-through-adapter MTRJ with Keystone-adapter, grey FO through-adapter for MTRJ connectors. Adapter housing made of plastic with Composite sleeve. Can be fitted in a housing wall with holes for RJ45 outlets (with the Keystone-Adpter). Order No. FO-through-adapters MTRJ Pack 7023 1 041-00 FO-through-adapter MTRJ for splice tray-k & MTRJ-wall outlet Adapter housing made of plastic with Composite sleeve. With Keystoneadapter. For 19 Splice tray-k-mtrj (7033 1 076-xx) and FO-Wall outletxmtrj (7033 1 067-00) Order No. FO-through adapters MTRJ Pack 7023 3 052-00 FO-KEYSTONE-adapter MTRJ for FO-through-adapter MTRJ Keystone-adapter - Befestigung mittels Rastung. Order No. FO-through-adapters LC Pack 7048 1 019-00 FO-through-adapter LC /PC duplex, SM, blue 7048 1 020-00 FO-through-adapter LC/APC duplex, SM, green 7048 1 021-00 FO-through-adapter LC/PC duplex, MM, beige Adapter housing made of plastic with ceramic sleeve (Ø 1,25mm) Snap-In-clips. The LC/PC-through adapter can be used for LCconnections with UPC surface polishing. 23 http://www.krone-gmbh.at 3 - Page 5
3.2 FO-Patch Cords FO-Patch Cords, Pigtails Order No. FO-pigtails, SM Pack 7006 1 140-52 FO-pigtail, E2000 SM-fibre 9.0/125µm, 2 m, UPC-polishing, buffered fibre 0.9 mm 7006 1 120-52 FO-pigtail, FC SM-fibre 9.0/125µm, 2 m, UPC-polishing, buffered fibre 0.9 mm 7006 1 110-52 FO-pigtail, SC SM-fibre 9,0/125µm, 2 m, UPC-polishing, buffered fibre 0.9 mm Order No. FO-pigtails, MM Pack 7006 2 120-12 FO-pigtail, FC buffered fibre 0.9 mm 7006 2 150-12 FO-pigtail, ST buffered fibre 0.9 mm 7006 2 110-12 FO-pigtail, SC buffered fibre 0.9 mm Order No. FO-patch cords, SM Pack 7006 1 244-52 FO-patch cord, E2000-E2000 SM-fibre 9.0/125µm, 2 m, UPC-polishing, cable 3 mm 7006 1 222-52 FO-patch cord, FC/UPC-FC/UPC SM-fibre 9.0/125µm, 2 m, UPC-polishing, cable 3 mm 7006 1 211-52 FO-patch cord, SC/UPC-SC/UPC SM-fibre 9,0/125µm, 2 m, UPC-polishing, cable 3 mm Order No. FO-patch cords duplex, MMPack 7006 2 522-12 FO-patch cord, FC-FC duplex cable 3mm 7006 2 555-12 FO-Patch cord, ST-ST duplex cable 3mm 7006 2 577-12 FO-patch cord, SC-SC duplex cable 3mm 7006 2 552-12 FO-patch cord, ST-FC duplex cable 3mm 7006 2 557-12 FO-patch cord, ST-SC duplex cable 3 mm Further types and lengths on request. 3 - Page 6 http://www.krone-gmbh.at 23
FO Patch Cords 3.2 FO-Patch Cords, Pigtails Order No. FO-pigtail-MTRJ, MM Pack 7023 1 028-02 FO-pigtail, MTRJ Ader 2 x 0,65 mm Order No. FO-patch cords-mtrj, MM Pack 7023 1 020-02 FO-patch cord d., MTRJ-MTRJ cable 2 x 1,8 mm 7023 1 021-02 FO-patch cord d., MTRJ-SC cable 2 x 1,8 mm 7023 1 022-02 FO-patch cord d., MTRJ-ST cable 2 x 1,8 mm Order No. FO-connector MTRJ & cable Pack 7023 1 111-00 FO-connector, MTRJ f. Pigtail, 62,5µ for fibre 62,5/125µm, field configurable 7023 1 112-00 FO-connector, MTRJ f. Pigtail, 50µ for fibre 50/125µm, field configurable 7023 3 212-00 FO-cable 2 x 50/125µ., Minizip Order No. FO-MTRJ-mounting tools Pack 7023 1 045-00 MTRJ-mounting tool bag complete 7023 1 110-00 MTRJ-mounting tool 23 3 http://www.krone-gmbh.at - Page 7
3.3 FO-Splice Modules FAME, FO-Splice Module Order No. FO-splice module FAME Pack 6769 2 261-00 FO-splice module FAME S6 6769 2 265-00 FO-cover for FAME S6 Single-fibre management system for terminating twelve fibres (6x2 pairs). Six subscriber cassettes are arranged in the splice module, in two blocks of three cassettes each vertically arranged in the splice module. Each cassette can accommodate two splices with scrimp splice protectors. They can be opened individually, thus permitting individual assembly of two fibre pairs without touching the other fibre bundles. Fibres which have not been cut or are not in use can also be stored. The splice module can be fixed through a hole in the centre of the module. Several splice modules can be stacked. A cover for the (top) splice module can also be ordered separately. Order No. FO-splice module FAME Pack 6769 2 260-00 FO-splice module FAME S4 Single-fibre management system for terminating eight fibres (4x2 pairs). Four subscriber cassettes are vertically arranged in the splice module. Each cassette can accommodate two splices with scrimp splice protectors. They can be opened individually, thus permitting individual assembly of two fibre pairs without touching the other fibre bundles. Fibres which have not been cut or are not in use can also be stored. The splice module can be fixed by inserting the screw supplied through a hole in the centre of the module. Order No. FO-splice cassette Pack 6833 2 239-01 FO-splice cassette 6833 2 240-01 FO-cover for splice cassette Splice cassette for accommodating various splice holders depending to splicing system. The cassette can be fixed through a hole in the centre of the cassette. Dimensions: 155 x 92 x 8mm Order No. FO-splice cassette Pack 6769 2 333-00 FO-splice cassette UK24 6769 3 333-00 FO-cover for UK24 splice cassette Splice cassette for accommodating splices and fibre reserve lengths. The cassette can be fixed through a hole in the centre of the cassette. The dimensions of the splice cassette guarantee a minimum bending radius of 40mm for the fibres fitted. The UK24 splice cassette comes with two integrated crimp splice holders, each designed to accommodate 12 crimp splice protectors. Other types of splice holders can also be attached. Several cassettes can be stacked. A cover for the (top) cassette can also be ordered separately. Dimensions: 162,5 x 120 x 10mm Distribution cabinets see chapter 16. 3 - Page 8 http://www.krone-gmbh.at 23
FO-Splice Protection, Splice Holders 3.3 FO-Splice Protectors, Splice Holders Order No. FO-splice protector (cement) Pack 6800 2 033-25 FO-splice protector (cement), 50mm 25 pcs Splice protector sleeve for thermal splices. Polymer shrinking tube and inner steel pin. Dimensions (l x Ø) in mm: 50 x 3. Order No. FO-splice holder (cement) Pack 6800 2 034-02 FO-splice holder (cement) 2 pcs Splice holder designed for use in OPAL, UK24 and KRONE splice cassettes, capable of accommodating up to 6 splices with cement splice protectors. Dimensions (l x w x h) in mm: 36 x 26 x 5. Order No. FO-splice protector (crimp) Pack 6800 2 035-15 FO-splice protector (crimp) 150 pcs Splice protector for thermal splices. The V-shaped, corrosion-resistant metal support is coated on both sides with a permanently elastic coating which substitutes the primary coating of the fibres. Dimensions (l x w x h) in mm: 30 x 3 x 3 Order No. FO-splice holder (crimp) Pack 6800 2 036-02 FO-splice holder (crimp) 2 pcs Splice holder designed for use in OPAL and KRONE splice cassettes, capable of accommodating up to 12 splices with crimp splice protectors. Dimensions (l x w x h) in mm: 34 x 40 x 4. 23 3 http://www.krone-gmbh.at - Page 9
3.4 19 -Splice Trays FO-19 -Splice trays Order No. 19 -Splice tray Pack 6977 1 100-00 FO-19 -splice tray Splice tray with cover and without front panel. Fibre guides, Spiral tube, cable ties, Adjustable splice cassette holder with knurled nut, 1 or 2 KRONE splice cassettes, including splice holder (crimp), cover, Fixing materials for 19" installation, Assembly instructions Order No. Front panel for 19 -splice tray Pack 6977 1 103-11 FO-19 -front panel 12xST 6977 1 103-21 FO-19 -front panel 24xST 6977 1 103-12 FO-19 -front panel 12xDIN 6977 1 103-22 FO-19 -front panel 24xDIN 6977 1 103-13 FO-19 -front panel 12xFC 6977 1 103-23 FO-19 -front panel 24xFC 6977 1 103-14 FO-19 -front panel 12xSC/E2000 6977 1 103-24 FO-19 -front panel 24xSC/E2000 6977 1 103-15 FO-19 -front panel 12xSCD Order No. 19 -splice tray 24 Pack 6829 1 121-00 FO-19 -splice tray-24-24xsc 6829 1 121-01 FO-19 -splice tray-24-12xsc 6829 1 121-10 FO-19 -splice tray-24-12xscd, duplex 6829 1 122-00 FO-19 -splice tray-24-24xst 6829 1 122-01 FO-19 -splice tray-24-12xst 6829 1 123-00 FO-19 -splice tray-24-24xfc 6829 1 123-01 FO-19 -splice tray-24-12xfc Splice tray with sliding box. (without through-adapters) Order No. 19 -splice tray 24 cover Pack 6829 2 065-00 FO-19 -splice tray-24-cover Order No. 19 -splice box 24 Pack 6829 1 200-00 FO-19 -splice box-24-24xsc 6829 1 200-01 FO-19 -splice box-24-12xsc 6829 1 201-10 FO-19 -splice box-24-12xscd 6829 1 201-00 FO-19 -splice box-24-24xst 6829 1 201-01 FO-19 -splice box-12xst 6829 1 202-00 FO-19 -splice box-24-24xfc 6829 1 202-01 FO-19 -splice box-24-12xfc 19 Splice box prepared for FO-through adapters. Order No. 19 -splice box 24 cover Pack 6829 2 066-00 FO-19 -splice box-24-cover 3 - Page 10 http://www.krone-gmbh.at 23
19 -Splice Trays 3.4 FO-19 -Splice trays Order No. 19 -splice tray-k Pack 7033 1 076-xx 19"-splice tray-k-mt-rj 7033 1 078-xx 19"-splice tray-k-sc 7033 1 082-xx 19"-splice tray-k-st 7033 1 080-yy 19"-splice tray-k-scd How to order: xx=04 for 4x, xx=08 for 8x, xx=12 for 12x, xx=16 for 16x, xx=24 for 24x for SC-duplex: yy=04 for 2x, yy=08 for 4x, yy=12 for 6x, yy=16 for 8x, yy=24 for 12x 19 -FO-patch panels made of PC/ABS with integrated fibre-management and embossed outlets for the inlet of Bündeladern or Break-out cables. For standard cabling and for blown fibre -systems. Order No. 19 -splice tray-k without front module Pack 7033 1 090-00 19"-splice tray-k-empty Prepared for 4 front modules. Modular system increase the flexibility. ell-nr 19 -FO-patch panels made of PC/ABS with integrated fibre-management and embossed outlets for the inlet of Bündeladern or Break-out cables. For standard cabling and for blown fibre -systems. Order No. 19 -splice tray-k front module, unequipped 7033 1 091-00 19"-splice tray-k-front module 6xMT-RJ, without through adapter 7033 1 092-00 19"-splice tray-k-front module 6xSC, without through adapter 7033 1 094-00 19"-splice tray-k-front module 6xST, without through adapter 7033 1 093-00 19"-splice tray-k-front module 3xSCD, without through adapter Pack Front modules unequipped, prepared for FO-through adapters. Order No. 19 -splice tray-k splice holder Pack 7033 2 018-00 FO-splice holder-k for 4 splice protectors Splice holder especially for 19 -splice trays-k. Holds up to 4 splice protectors. 23 3 http://www.krone-gmbh.at - Page 11
3.5 FO-Wall Outlets FO-Wall Outlets Order No. FO-Wall Outlets MTRJ Pack 7033 1 067-00 FO-wall outlet-4xmtrj, 148x88mm, leer 7033 1 067-04 FO-wall outlet-4xmtrj, 148x88mm, inkl. 4 Kupplungen Order No. FO-Wall Outlets SCD Pack 7033 1 069-00 FO-wall outlet-2xscd, 148x88mm, leer 7033 1 069-04 FO-wall outlet-2xscd, 148x88mm, incl. 2xD-trough-adapter Order No. FO-Wall Outlets ST Pack 7033 1 071-00 FO-wall outlet-4xst, 148x88mm, leer 7033 1 071-04 FO-wall outlet-4xst, 148x88mm, incl. 4 trough-adapter 3 - Page 12 http://www.krone-gmbh.at 23
FO-Indoor Distributors 3.6 FO Indoor Distributors Wall Mounted Order No. KVK Hybrid distributor Pack 6803 1 282-10 KVK Hybrid 12SC/E2000 / 10 pairs 6803 1 282-11 KVK Hybrid 12ST / 10 pairs 6803 1 282-13 KVK Hybrid 12FC / 10 pairs Distribution cabinet, prepared for max. 12 throughadapters. Plastic ground plate (ABS) colour similar RAL 7036 and coated steel cover colour - similar RAL 7035. Dimensions: 320x295x90mm (HxWxD) Scope of delivery: KVK Box, splice cassette holder with one splice cassette, LSA-PLUS disconnection module 2/10 with label holder, labeling and fixing material. Order No. KVK-FO Distribution box Pack 6803 1 181-14 KVK-FO-1/4 Prepared for 4 Splice cassettes with 1 holder for throughadapter. 6829 2 007-00 KVK-FO-holder 6xSC or E2000 6829 2 007-01 KVK-FO-holder 6xST 6829 2 007-02 KVK-FO-holder 6xFC Order No. KVK-FO-splice box Pack 6803 1 181-24 KVK-FO-2/4 Prepared for 8 Splice cassettes without holder for throughadapter. Order No. FO-WVT-wall distribution box Pack 6977 1 001-00 FO-WVT-wall distribution box FO wall distribution box without FO distribution panel, made of coated steel. Colour: RAL7032 Scope of delivery: Ground plate, fiber guides, splice cassette holder, 2.5m spiral tube, connector identification card. Cover with latch. Order No. FO-WVT-accessories Pack 6977 2 004-01 FO-WVT-distribution panel 48xST 6977 2 004-02 FO-WVT-distribution panel 48xSC or E2000 6977 2 004-03 FO-WVT-distribution panel 48xFC Prepared for standard throughadapters. 6977 2 007-00 FO-WVT-lock for cover 6769 2 510-01 FO-WVT-LSA-PLUS kit 10 pairs Scope of delivery: LSA-PLUS Disconnection module 2/10, backmount frame, fixing material 6769 2 085-01 FO-WVT-earth connection kit For connecting of the FO-WVT distributer with the earth. 6977 2 006-00 FO-WVT-locking panel Protection against unwanted access for network interface points Scope of delivery: Locking panel with lock. 6977 2 014-00 FO-WVT-dust protector Dust protection for cable feed into the FO-WVT Wall distributor. 23 3 http://www.krone-gmbh.at - Page 13
3.6 FO-Indoor Distributors FO-Indoor Distributors for Wall Mounting Order No. Module box for max. 12/24 fibres Pack 6977 1 400-00 FO-module box 12 6977 1 401-00 FO-module box 24 The fibre-optic module box (FO-MB) is used as a distribution point in buildings for the termination of indoor or outdoor cables. The FO-MB has a double cover which is designed for the installation of two different locks. This permits separate access, for example for the network operator and customers. Installation of preassembled FO connector modules significantly reduces installation time. All installation steps can be carried out without labourintensive passing through of cables or fibres. This allows reconfiguration and expansion of a network to be carried out without a time-consuming and costly disconnection of the network. The FO-MB 12 accommodates one connector module 8HP/3U for 12 fibres; the FO-MB 24 accommodates two connector modules for a total of 24 fibres. Dimensions (W x H x D) in mm: FO-MB12: 180 x 330 x 50 GFO-MB24: 310 x 330 x 50 Scope of delivery: 1 module box with a double cover and cable entries, without a lock, cable guide elements, 1 installation instructions Material: sheet steel, painted Colour: grey, similar to RAL7035 Protection system: IP44 Order Nr. FO-connector modules (8TE/3HE) Pack with FAME 6 C 6833 2 233-02 FO-connector module 3HE- 12xSC/APC8, SM-fibre (9/125 µm) 6833 2 233-03 FO-connector module 3HE- 12xSC/UPC, SM-fibre (9/125 µm) 6833 2 233-04 FO-connector module 3HE- 12xSC/PC, SM-fibre (9/125 µm) 6833 2 233-05 FO-connector module 3HE-12xSC/PC MM-fibre (62,5/125 µm), Fame 6C 6833 2 233-06 FO-connector module 3HE-12xSC/PC MM-fibre (62,5/125 µm) Order-Nr. Lock kits Pack 6977 2 400-00 FO-module box-lock, locking mechanism 01 6977 2 400-01 FO-module box-lock, locking mechanism 02 Delivery: Kit without key. 6977 2 401-00 FO-module box-key, lock. mech. 01 6977 2 401-01 FO-module box-key, lock. mech. 02 6977 2 402-00 FO-module box-bolt For each lock is a bolt needed. 3 - Page 14 http://www.krone-gmbh.at 23
FO-Outdoor Distributors 3.7 FO-Outdoor Distributors for Wall- or Pole Mounting Order No. Distributor for max. 48 fibres Pack On request FO-EVz-A200/48 For splicing and patching of up to 48 fibres. Basic version consists of: KRONECTION Box A-200, splice cassette with cover, over-length accommodation and cable guides. Dimensions: 237x660x149mm (WxHxD), Protection type: IP 55 Colour: grey (similar RAL 7032) Material: glass fiber-reinforced polyester Wall or pole mounting. Versions for flush mounting or with pedestal for free-standing application on request. Order No. Distributor for max. 144 fibres Pack On request FO-EVz-A200/144 For splicing of up to 144 fibres. Basic version consists of: KRONECTION Box A-200, splice cassette with cover, over-length accommodation and cable guides. Dimensions: 237x660x149mm (WxHxD), Protection type: IP 55 Colour: grey (similar RAL 7032) Material: glass fiber-reinforced polyester Wall or pole mounting. Versions for flush mounting or with pedestal for free-standing application on request. Order No. Pole mounting kit Pack 0416 2 003-81 KRONECTION Box A-200 Pole mounting kit Two pieces for one FO-EVz-A200 are necessary. 23 3 http://www.krone-gmbh.at - Page 15
3.8 FO-System Distributor N Overview FO-based outdoor distributors for high numbers of fibres are fitted into cross connection cabinets. Such distributors from KRONE are then often used as outdoor distribution points in networks and are characterized by allowing optimum access. KRONE has developed the FO distributor in the network (FO distributor N) for the OPAL projects of Deutsche Telekom AG. In order to meet the increased demands in the field of access networks, the FO system distributor in the network (FO system distributor N), which is also patented, was developed as a logical progression of the experience gained. The central unit of the FO system distributor N is designed to accommodate the splice connections and spare cable lengths in FO cassette housings. The FO couplers and/or coupler modules can also be stored here. The splice connections are stored in standardized splice cassettes which are stored in separate FO cassette housings. These cassette housings are also designed to accommodate the fiber bundles with a total of 12 fibers (1x12 or 3x4 fibers) and the related connection fibers. A working length of approx. 1.5m can be stored; this length is required in order to connect the splice cassette (from the cassette housing in the mounting position in the distributor) to the splice table. The FO system distributor N has a patch unit which also offers the possibility of connecting optical plug connectors. An application which is becoming a necessity in an ever-increasing number of network configurations. FO System distributor N (without housing) The FO system distributor N is designed in such a way that it can be easily adapted and installed in various cross connection cabinets. This is true for all enclosures with a minimum depth of 210 mm and a minimum height of 800mm. Area of application Outdoor distributor for small, medium and large systems for jumpering (via splice connections) and switching (via plug connectors) between main cables and distribution cables With optimum use of optical couplers and wavelength multiplexers Suitable for all modern network configurations with high levels of flexibility Customer benefits Switching and measuring point in the network which does not have to be located in the same building Quick and easy access Long experience in various network configurations Suitable for use both indoors and outdoors System compatible with FO main distribution frames from KRONE Can be easily adapted - even to enclosures from other manufacturers 3 - Page 16 http://www.krone-gmbh.at 23
FO-PROFIL Distributor System 3.9 Gf-PROFIL-Splice Module Order Nr. FO-PROFIL-splice module Pack 6833 2 480-00 FO-PROFIL-splice module The fibre-optic splice module PROFIL (FO-SpM) serves for the storage of splice connections. Tray housings,which accommodate both splice connections and excess lengths, are installed in a holder which is simply snapped onto the profile rods (centre-to-centre distance: 95 mm). The FO-SpM PROFIL can only be installed in a VtCom FO-600 or in a PROFIL distribution frame with sufficient space. Dimensions (W x D x H) in mm: 197 x 150 x 494 (equipped with tray housings) Features Can be snapped on without a tool As needed, from 1 to 6 tray housings for 12 splices each can be installed. A splicing aid (to be ordered separately) serves to hold the tray housing securely during the splicing operation When required, splices can be separated post set-up and the fibres spliced to cable pigtails, which can then be connected to other modules The use of tray housings with FAME allows post setup work to be performed without its influencing the ongoing operation of the system Cable-guide elements ensure reliable guidance of the loose tubes Scope of delivery: 1 cassette holder, fixing material, installation instructions Order Nr. Splicing Aid Pack 6833 2 481-00 FO-PROFIL-SpM-splicing aid The splicing aid is used together with the splice module PROFIL. It fixes the open tray housing to the FO-SM, facilitating the installation of the splices, which includes the storage of the working lengths. If needed, it can be hung in the splice module. Order Nr. FO-tray housings Pack 6769 2 255-00 FO-tray housing with FAME 6 C with crimp splice holders 6769 2 253-01 FO-tray housing with splice cassette 6769 2 251-00 FO-tray housing with splice cassette UK24 with crimp splice holders Distribution frames see chapter 12 - Digital Signal Distributors. 23 3 http://www.krone-gmbh.at - Page 17
3.9 FO-PROFIL Distributor System FiberCOM Order No. FiberCOM splice module Pack 6619 1 008-00 FiberCOM-splice module 6619 2 073-00 FiberCOM-guide module Application: Distribution cabinets and frames with LSA-PROFIL rod system (HVt 91 M) Dimensions: About 500mm, similar 200 pairs connection block for copper. Capacity: Maximum of two splice cassettes with up to 12 splices each per splice module. At least four through adapters (depending on the used connector system) per patch module. Order No. Accessories Pack 6619 3 084-00 FiberCOM-patch module for 4xDIN 6619 3 084-02 FiberCOM-patch module for 4xFC 6619 3 084-03 FiberCOM-patch module for 4xSC/E2000 FO-distribution frames see chapter 12 - Digital Signal Distributors. FO-splice cassettes, through-adapters, patch cords etc. see chapter 3 - FO Technology 3 - Page 18 http://www.krone-gmbh.at 23
FO-Assemblies 3.10 FO-Assemblies Order No. FO-patch assemblies 6x2 Pack 6833 2 460-00 FO-assembly 6x2 E2000/APC-green 6833 2 460-02 FO-assembly 6x2 SC/APC-green 6833 2 460-03 FO-assembly 6x2 FC/PC 6833 2 460-06 FO-assembly 6x2 SC/PC To be clipped onto profile rods (95 mm). Pitch = 125 mm. Note: Only for open distribution frames: VT-COM-Gf-600 and VTSsystem with PROFIL-frame-FO which are designed as FO-distributors with FO-jumper guides and cable feeds! Delivery: FO-assembly with through-adapters. Order No. FO-assembly 6x2-SC Pack 7013 2 300-04 FO-assembly 6x2 SC/E2000 For max. 12 FO through-adapters SC or E2000. To be clipped onto profile rods (95 mm). Pitch = 100 mm. Order No. FO-through-adapter carrier assembly Pack 6619 2 004-08 FO-through-adapter carrier assembly 2x2 SC/E2000 For 4 FO-through-adapters SC or E2000. To be clipped onto profile rods (95 mm). Pitch = 25 mm Order No. FO-connector module Pack 6833 2 440-00 FO-connector module 12xE2000/APC 8 green 6833 2 440-01 FO-connector module 12xSC/APC 8 green 6833 2 440-03 FO-connector module 12xFC/PC 6833 2 440-06 FO-connector module 12xSC/PC 6833 2 440-07 FO-connector module 12xE2000/PC 6833 2 440-09 FO-connector module 12xST/PC-MM FO-connector module (Order No.: 6833 2 440-09) with MM 50/125 µm. With splice holder, over-length cassettes fitted with FO throughadapters and connected SM fiber pigtails, 0.9 mm, colour marked. Order No. FO-separator for loose tubes Pack 6833 2 482-00 FO-separator for loose tubes The loose-tube separator set is used for separating or bringing together of fibres from loose tubes which can then be guided, for example in a distribution frame, by means of protective tubing. The diameter of the loose tubes has to be 2.8 mm. One set can be used for 5 separations 1x2. 23 3 http://www.krone-gmbh.at - Page 19
Notes 3 - Page 20 http://www.krone-gmbh.at 23