Easy! Smooth! PS3710A/PS3711A PS5701W/PS5711W Replacement Guidebook 1 First Edition Sep. 2016 Copyright 2012.9 Digital Electronics Corporation. All Rights Reserved.
Introduction This document introduces the procedures and notes for replacing the PS371*A with the PS57*1W. The recommended substitute model is listed below. Equipment in use PS3710A *1 (1 slot,pentium M model) Model code:ps3710at42(24v) PS3711A *1 (0 slot,celeron M model) Model code:ps3711at42(24v) *1 Sales terminated as of September 2012 Recommended substitute model PS5711W (Core i3 TM model) Model code:pfxps2hn3d8****n00 PS5701W (Atom model) Model code:pfxps2gnad4****n00 Safety Information HAZARD OF OPERATOR INJURY, OR UNINTENDED EQUIPMENT DAMAGE Before operating any of these products, be sure to read all related manuals thoroughly. Failure to follow these instructions can result in death, serious injury or unintended equipment damage. Registered trademarks Microsoft and Windows are registered trademarks of Microsoft corporation in the United States and/or other countries. Intel, Celeron,Atom,Core2 Duo and Core i3/7 are registered trademarks of Intel corporation. Product names used in this manual may be the registered trademarks owned by the respective proprietors. 2
Interpreting the PS5000 Series Model Code A portion of the PS5000 Series model code differs according to the specification. When purchasing the PS5000 Series, carefully check the model code to order before making your purchase. P F X P * 2 * * * * * * * * * N 0 0 5 7 8 9 10 11 12 13 14 15 *1 In the case of Atom model, an expansion adapter is attached. *2 It is effective of Atom model choice. *3 It is effective of Core i3 model choice. Character number 5 7 8 9 10 11 12 13 14 15 Base unit Slim Panel and Enclosed panel PC S Modular panel Slim panel Atom W15 C type Slim panel Core i3 W15 G Slim panel Core i3 W15 H Slim panel Core i3 W19 K Enclosed panel Core i3 W19 M Box type None N CPU type AtomE3827 A Core i34010u 3 Power supply DC D RAM sizes 4GB *2 4 8GB *3 8 Operating None 0 system Windows Embedded Standard 7 (WES7P) SP1 64 bits MUI 4 Windows 7 Ultimate 64 bits MUI 6 Windows Embedded 8.1 Industry 64 bits MUI 8 Storage device None N CFast 16 GB A CFast 16 GB *1 B*2 HDD 500 GB *1 Q*2/C*3 HDD 1 TB *1 R*2/E*3 SSD 80 GB *1 S*2/F*3 SSD 160 GB *1 T*2/G*3 SSD 240 GB *1 U*2/H*3 Expansion adaptor without storage drive *1 V*2 Options None 0 NVRAM mini PCIe 1 Interface 2 x RS 422/485 isolated 2 Interface 4 x RS 422/485 3 Interface 2 x RS 232 isolated 5 Interface 4 x RS 232 6 Interface 16 x DI / 8 x DO 8 Cellular module D Interface 2 x CANopen G Interface 1 x Profibus DP with NVRAM J Interface 1 x Ethernet Gigabit IEEE1588 LAN K Second storage None N CFast 16 GB A HDD 500 GB Q*2/C*3 HDD 1 TB R*2/E*3 SSD 80 GB S*2/F*3 SSD 160 GB T*2/G*3 SSD 240 GB U*2/H*3 3
Contents Introduction 2 Interpreting the PS5000 Series Model Code 3 Contents 4 Chapter 1. Specification Comparison 6 1.1 PS371*A and PS57*1W specification comparison 6 Chapter 2. Hardware Compatibility 8 2.1 Differences in function locations 8 2.2 Touch Panel 11 2.3 Main memory 11 2.4 Installation 11 2.5 Serial Interface 11 2.6 USB Interface 11 2.7 Power supply plug 12 2.8 Power consumption 12 2.9 Panel cut dimensions 12 Chapter 3. Compatibility with Accessories 13 3.1 Individual accessories 13 3.2 Maintenance accessories 13 Chapter4. Software Compatibility 14 4.1 Supported operating systems and operating system languages 14 4.2 Supported software 15 4
4.3 Functions supported by System Monitor 15 Chapter 5. Appendix 16 5.1 Exclusive BTO (build to order) options 16 5
Chapter 1. Specification Comparison 1.1 PS371*A and PS57*1W specification comparison Display specifications PS3710A/PS3711A PS5711W/ PS5701W Display device TFT color LCD (15inch) TFT color LCD (15.6inch) Graphics XGA(1,024 768 pixels) FWXGA(1,366 768 pixels) Display colors/gradation Backlight Brightness adjustment Display device lifespan 260,000 colors 16.7 million colors Revision "5" with no symbol Coldcathode tube (replaceable) Revision "5" with symbol LED backlight (not user replaceable, sendback type) 4 levels (adjust on Windows control panel) 50,000 hours LED backlight (not user replaceable, sendback type) Stepless adjustment Backlight lifespan 50,000 hours or more Type Analog resistive UP! Projected capacitive See 2.2 Touch Resolutio panel 1,024 1,024 4,096 4,096 n CPU Performance specifications PS3710A/PS3711A Intel Pentium M (1.6GHz) ULV Intel Celeron M(1GHz) PS5711W/ PS5701W UP! Intel Core i34010u 1.7 GHz UP! Intel Atom E3827 1.75 GHz Cache memory 1MB 512KB UP! 3MB UP! 1MB Main memory See2.3 2 slots (2GB max) (DDR 333 MHz) 1slot(1GB max) (DDR 333MHz) 1slot(8GB) (DDR3 1,600MHz) 1slot(4GB) (DDR3 1,066MHz) Chipset Intel 855GME+ICH4 Lynx PointLP Integrated in Intel Atom SoC Graphics Onboard Intel Intel HD Graphics 855GME controller 4400 Intel HD Graphics Video memory 64 MB max 2GB max (Allocated from main memory) (Allocated from main memory) Video output Analog Digital UP! FHD (1,920 1,200 pixels) or lower 6
Panel cut dimensions External dimensions Front bezel material Weight Cooling method Power supply See 2.7 Power consum ption AC power supply DC power supply Battery backup UPS General specifications PS3710A/PS3711A W383.5 x H282.5 mm [W15.10 x H11.12 in.] W395 x H294 x D60 mm [W15.55 x H11.57 x D2.36 in.] W395 x H294 x D100 mm [W15.55 x H11.57 x D3.94 in.] Die cast aluminum Approx. 8.0 kg Approx. 6.0 kg [17.6 lbs] [13.2 lbs] Natural air Forced air cooling circulation by fan (Fanless) DC power supply: 24 V, AC power supply: 100 to 240 V 150VA or lower 110W or lower 70VA or lower 90W or lower PS5711W/ PS5701W W412.4 H261.7 mm [W16.2 x H10.3 in.] See 2.9 W419.7 H269 D56.7 mm [W16.5 x H10.59 x D2.23 in.] See 2.4 Approx. 6.0 kg [13.2 lbs] Aluminum W419.7 H269 D61.9 mm [W16.5 x H10.59 x D2.43 in. See 2.4 Approx. 3.9 kg [8.6 lbs] UP! Natural air circulation (Fanless) See 2.4 DC power supply: 24 V, AC power supply: 100 to 240 V (Optional) 60W or lower See 2.8 60W or lower See 2.8 30 W or lower See 2.8 30 W or lower See 2.8 Interface specifications PS3710A/PS3711A PS5711W/ PS5701W RS232C 1 RS232C 1 Serial RS232C/422/485 1 RS232C/422/485 1 See 2.5 (9pin Dsub plug) RS232C(RI/+5V RS232C(RI/+5V switchable) 2 switchable) 1 RAS 25pin Dsub plug PS/2 keyboard PS/2 interface x 1 (6pin mini DIN socket) Disk USB See 2.6 Ethernet PCMCIA Sound SATA IDE 2.5inch HDD/SSD 1 CF card (TypeI/II 2GB) 1 DVDROM USB 5 (USB2.0,TypeA) 10BASET/100BASETX auto switching x1 10BASET/100BASETX/1000BASET auto switching x1 Side x 2 PCMCIA Type II, Type III cards can be used. CARD BUS support (Excluding VIDEO ZOOM, SOUND functions) Line input/line output/mic input UP! USB 2 (USB3.0,TypeA) UP! HDD/SSD 1 CFast Card 1 UP! USB 2 (USB3.0x1/ USB2.0x1 TypeA) 10BASET/100BASETX/1000BASET auto switching x2 Line input DVI NEW! HDMI x1 PCI PCI 1 slot (Rev.2.2) Expansion Slot mini PCIe x1 Floppy disk 2 mode 3.5inch floppy disk, side 7
Chapter 2. Hardware Compatibility 2.1 Differences in function locations The locations of the various functions differ on the PS371*A and the PS57*1W as shown below. PS3710A (0/1 slot) and PS5711W function locations 8
PS5711W A 5 T 4 N 676 W O P 2 13 8 9
PS3710A PS5711W A Status LED (power supply) Status LED (power supply) B Status LED (disk access) C Front cover D Hardware reset switch E USB I/F F Expansion board supporter G Arm installation hole H Power supply switch I FD drive J DVDROM drive K PCMCIA interface L PS/2 keyboard interface M Rear cover N USB I/F O Ethernet interface(lan1) P Ethernet interface(lan2) Q Expansion slot PCI R Serial I/F (RS232C, RI/5V switchable) S T Serial I/F (RS232C/422/485) U Serial I/F (RS232C) V Line input W Speaker output X Mic input Y RAS interface Z Cooling fan 1 CF slot Attach CFast card inside 2 Power supply connector Power supply connector 3 Attach HDD/SSD inside 4 HDMI 5 Optional I/F cover 6 SMA connector (Wifi outside antenna) 7 SMA connector (GPRS outside antenna) 8 Heat sink 10
2.2 Touch Panel For slim types of PS5000 Series, a touch screen using projected capacitive type of technology is used. This screen may run incorrectly depending on an environment in which the screen s surface gets wet. Confirm the following descriptions before use. When conductive substances like water attach to a touch screen, touch control gets disabled to prevent incorrect touch input operation. Touch control gets disabled to prevent incorrect touch input operation. If situations that cause disabled touch control are removed, the touch function will automatically get enabled. The touch panel s firmware is automatically initialized during boot of Windows. Please do not touch the touch screen area while the operating system is starting. The touch panel may be affected by noise of connected devices. Be sure to confirm grounding of utilized devices including this product. 2.3 Main memory PS57*1W does not allow users to add memory. Please be aware of it. Interpreting the PS5000 Series Model Code 2.4 Installation PS57*1W is large a little than PS371*A, but larger space is required than the values shown below for safe installation with adequate air circulation considered. Top/Bottom, Back Left/Right 1 :Intake air 2:Emission 2.5 Serial Interface You can add one port for a serial interface compatible with communication types (RS232/422/485) as an option item to PS5000 Series. To add it, select a number between 2 and 6, inclusive for the 14 th digit of model code. To add it after purchasing PS5000 Series, please purchase the option item and mount it. To make RS422/485 communication via the added serial interface, arbitrary software that can switch the RTS line every time a driver is sent or received is required. It s not automatically switched. 2.6 USB Interface USB Interface of PS57*1W has 2 ports in total; USB 2.0 x 1 and USB 3.0 x 1. Use a channel corresponding to a connected device. 11
DC power supply AC power supply 2.7 Power supply plug PS371*A had both AC and DC power supply models, but the PS57*1W has only DC power supply models. Caution: The power line terminal locations for the power supply plug are different. PS371*A PS57*1W (DC power supply only) Power supply cable AC connector DC connector DC コネクタ Power supply 電源ケーブル cable FG 0V 24V Power supply cable DC connector 2.8 Power consumption The power consumption does not include the value of power supplied to devices in the provided expansion slots and to USB devices. The maximum power consumption of the entire product including the value of supplied power is 60 W. 2.9 Panel cut dimensions The panel cut dimensions for the PS57*1W differ from those of the PS371*A. During replacement, installation hole fabrication will be required. 383.5mm [15.10 in.] +28.9mm [+ 1.14 in.] 282.5mm [11.12 in.] 20.8mm [0.82 in.] PS57*1W 12
Chapter 3. Compatibility with Accessories 3.1 Individual accessories Individual accessories for the PS371*A and their compatibility are listed below. These have low compatibility. Please be careful. Product name Model code * PS PS PS 3710A 3711A 57*1W DIM module DDR2 512MB CA7DDR2512MB OK OK NG 1GB CA7DDR21GB OK OK NG HDD unit 60GB PS371XAHD60P OK OK NG SSD unit 16GB PS371XASD16P OK OK NG CF card 128MB CA3CFCALL/128MB01 OK OK NG 256MB CA3CFCALL/256MB01 OK OK NG 512MB CA3CFCALL/512MB01 OK OK NG 1GB CA6CFCALL/1GB01 OK OK NG 2GB CA8CFCALL/2GB01 OK OK NG CF card adapter GP077CFAD10 OK OK NG Stand CA4STD1501 NG OK NG Plastic cover CA4CVR150 NG OK NG Power supply unit CA4PWU1501 NG OK NG Industrial hub SPIDER8TXPRO OK OK OK USB front attachment cable (1 m) CA5USBEXT01 OK OK OK Screen protection sheet (5 pcs.) CA3DFS1501 OK OK NG * Please check the model code/global code table at http://www.proface.com/trans/en/manual/1003.html. 3.2 Maintenance accessories Maintenance accessories for the PS371*A and their compatibility are listed below. These have low compatibility. Please be careful. Product name Model code * PS PS PS 3710A 3711A 57*1W Dripproof packing CA7WPG1501 OK OK NG Backlight CA7BLU1501 OK OK NG Mounting hardware CA3ATFALL01 OK OK NG AC power supply connector (straight) (5 pcs.) CA7ACCNL01 OK OK NG DC power supply connector (straight) (5 pcs.) CA7DCCNL01 OK NG NG DC power supply connector (right angle) (5 pcs.) CA5DCCNL01 OK OK NG * Please check the model code/global code table at http://www.proface.com/trans/en/manual/1003.html. 13
Chapter4. Software Compatibility 4.1 Supported operating systems and operating system languages The supported operating systems for the PS371*A and the PS5000 are listed below. OS PS371*A PS5000 Windows 2000 Japanese OK NG Windows 2000 MultiLanguage OK NG Windows XP Professional Japanese OK NG Windows XP Professional MultiLanguage OK NG Windows XP Embedded MultiLanguage OK NG Windows Embedded Standard 2009 NG NG Windows Embedded Standard 7 NG OK Windows 7 Ultimate NG OK Windows Embedded 8.1 NG OK system languages PS371*A PS5000 WinXP WinXP ML XPE ML WES7/Win7/WES81 Arabic Bulgarian Chinese(Simplified) Chinese(Traditional) Croatian Czech Danish Dutch English Estonian Finnish French German Greek Hebrew Hungarian Italian Japanese Korean Latvian Lithuanian Norwegian Polish Portuguese Portuguese(Brazil) Romanian Russian Serbian Latin Slovak Slovenian Spanish Swedish Thai Turkish Ukrainian :Supported, :Not supported, :The language can be used by installing the language pack. 14
4.2 Supported software The software that the PS5000 supports is listed below. Software WinGP *1 OK Proface Remote HMI Server OK Utilities System Monitor/Standalone Agent OK Backlight brightness adjustment *2 OK Touch panel driver *2 OK Keyboard emulator *2 OK Remote shutdown *3 OK EWF Setting Tool *2 OK Language selection Shell update *2 OK *1 An installer is included in the recovery media. *2 In Windows 7 Ultimate, Windows Embedded Standard 7, Windows Embedded 8.1, the function is a standard function. *3 The Remote Control function is included in System Monitor. 4.3 Functions supported by System Monitor The System Monitor functions that the PS5000 supports are listed below. Monitor item Error Action PS 5000 Monitor item Error Action PS 5000 Device Management Voltage DOUT NG Watchdog Timer DOUT NG LED NG LED NG Buzzer NG Buzzer NG Popup Message NG Popup Message NG Shutdown NG Shutdown NG Event Log OK Hardware Reset NG email OK Event Log NG Fan DOUT NG email NG LED NG SMART DOUT NG Buzzer NG LED NG Popup Message NG Buzzer NG Shutdown NG Popup Message NG Event Log OK Event Log NG email OK email NG Temperature DOUT NG DIN DOUT NG LED NG LED NG Buzzer NG Buzzer NG Popup Message NG Popup Message NG Shutdown NG Shutdown NG Event Log OK Event Log NG email OK email NG Backlight DOUT NG Software Event Log OK LED NG email OK Buzzer NG Popup Message NG Shutdown NG Event Log NG email NG Remote Control Remote Reset OK Remote Veiwer OK Remote RAS NG Remote Screen Shot OK 15
Chapter 5. Appendix 5.1 Exclusive BTO (build to order) options The products introduced below are optional products that can be builtin to the PS5700 when purchased. The products below can be builtin by specifying the order model code as shown in red. Please note that the options cannot be installed after purchase. P F X P S 2 * N * D * * * * * N 0 0 5 7 8 9 10 11 12 13 14 15 *1 In the case of Atom model, an expansion adapter is attached. *2 It is effective of Atom model choice. *3 It is effective of Core i3 model choice. Character number 7 8 9 10 11 12 13 14 15 Modular panel Slim panel Atom W15 G type Slim panel Core i3 W15 H CPU type AtomE3827 A Core i34010u 3 RAM sizes 4 GB *2 4 8 GB *3 8 Operating None 0 system Windows Embedded Standard 7 (WES7P) SP1 64 bits MUI 4 Windows 7 Ultimate 64 bits MUI 6 Windows Embedded 8.1 Industry 64 bits MUI 8 Storage device None N CFast 16 GB A CFast 16 GB *1 B*2 HDD 500 GB *1 Q*2/C*3 HDD 1 TB *1 R*2/E*3 SSD 80 GB *1 S*2/F*3 SSD 160 GB *1 T*2/G*3 SSD 240 GB *1 U*2/H*3 Expansion adaptor without storage drive V*2 Options None 0 NVRAM mini PCIe 1 Interface 2 x RS 422/485 isolated 2 Interface 4 x RS 422/485 3 Interface 2 x RS 232 isolated 5 Interface 4 x RS 232 6 Interface 16 x DI / 8 x DO 8 Cellular module D Interface 2 x CANopen G Interface 1 x Profibus DP with NVRAM J Interface 1 x Ethernet Gigabit IEEE1588 LAN K Second storage None N CFast 16 GB A HDD 500 GB Q*2/C*3 HDD 1 TB R*2/E*3 SSD 80 GB S*2/F*3 SSD 160 GB T*2/G*3 SSD 240 GB U*2/H*3 16