LOSS PREVENTION CERTIFICATION BOARD (LPCB) APPROVED PRODUCTS Technical Datasheets www.rocheystems.co.uk
E37 ELITE SR1 Insurance-approved shutter suitable for high security domestic and commercial applications up to 9m². The E37 Elite has been tested by the Loss Prevention Certification Board (LPCB) to LPS1175 SR1, and has Secured by Design status. It can be mounted internally, externally or a reveal fix. CURTAIN SLAT Double-skinned extruded aluminium. Colours: White or brown as standard. Option to powder coat any RAL / BS colour. Blind Surface: Weight per m2: Maximum Width: Maximum Surface: 38mm 9kg 3000mm 9m2 ENCLOSURE Roll-formed aluminium box enclosure with pressure-moulded aluminium alloy end caps. Colours: White or brown as standard. Option to powder coat any RAL / BS colour. Guide Height (up to mm) 1050 1535 1820 2695 3550 4700 Box Size (mm)* 150 165 180 205 250 300 *Internal face fix only. For reveal & external sizes speak to the Roché office. BOTTOM SLAT / GUIDE CHANNELS Extruded aluminium bottom slat and guide channels with rubber and brush weather seals. The extruded aluminium heavy duty guide channel is 60mm deep incorporating a unique aluminium box section to enhance security. Colours: White or brown as standard. Option to powder coat any RAL / BS colour. OPERATION Electric: Single phase tubular motor via internal switch or remote control external key switch as standard. Numerous control option variants such as group, remote or mobile phone activation. Manual override facility as required. Notes: Manual operation is not available with the Elite shutter. It may be installed internally or externally to a suitable substrate.
E37 ELITE SR1 FRONT FACE & PROFILE VIEW GUIDE OPTIONS FIXING OPTIONS HD60 Guide Approved fixings and installation instructions provided with the shutter for fixing to brick, block, aluminium and steel
T77 ELITE SR1 High security domestic and medium security commercial sites, up to 16m². The Elite Security Shutter has been tested by the Loss Prevention Certification Board to LPS1175 (6.0), achieving a security rating of SR1. It has also been awarded Secured by design status. Remote control operation with safety features meeting BS EN 13241-1, and manual override as standard. A wide range of colours are available, including woodgrain finishes which match standard window and door frames. CURTAIN SLAT Aluminium double-skinned slat with polyurethane foam insulating core. GUIDE CHANNELS / BOTTOM SLAT Colours: White, brown, beige, blue, red, moss green, sage green, fir green, black, light grey, anthracite grey, silver, oak, rosewood & teak as standard. Colours: White or brown. Foiled wood effect and RAL colours available. Blind Surface :: Weight per m² :: Maximum Opening Width :: Maximum Surface :: 77mm 5.5kg 5000mm 16m² ENCLOSURE / HOUSING Roll-formed aluminium enclosure with pressuremoulded aluminium alloy end caps. Colours: White or brown. Guide Height (up to mm) 1750 2700 3640 Box Size (mm)* 250 300 360 *Internal face fix only. For reveal & external sizes speak to Roché office. Extruded aluminium guide channels and bottom slat with brush and rubber weather seals. Note: To comply with LPCB certification the 150mm guide channel must be installed 30mm from the opening, allowing 180mm from the opening edge to the back of the guide channel. OPERATION Electric: Somfy tubular motor and internal rocker or external key switch as standard. Safety brake as appropriate to comply with legislation. Manual override facility and crank handle required. Numerous control option variants such as group, remote or mobile phone activation. Manual operation is available on the standard T77 only (not Elite).
T77 ELITE SR1 FRONT FACE & PROFILE VIEW FIXING OPTIONS FACE FIX The T77 Elite must be face-fixed, either to brick, block, steel section, or aluminium box section. Approved fixings and installation instructions are supplied with the shutter GUIDE OPTIONS
P76 ELITE SR1 The P76 Elite is a high security perforated steel shutter with 22% see-through vision designed for commercial and industrial applications up to 50m². The P76 Elite shutter has been tested and approved by the Loss Prevention Certification Board (LPCB) to LPS1175 SR1 and awarded Secured by Design status. CURTAIN LATH Perforated single skin curved steel. Lath wall thickness 1.2mm. Colour: Galvanised finish as standard. Option to plastisol or powder coat any BS / RAL colour. Visible Surface :: 76mm Profile Height :: 85mm Weight per m² :: 19kg Maximum Width :: 7000mm Maximum Surface :: 18m² (single phase tubular motor), 50m² (three phase motor) ENCLOSURE / HOUSING Roll-formed galvanised steel housing and end plates. Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour. Guide Height (up to mm) 2200 3650 4600 6000 7000 Box Size (mm)* 305 355 400 500 600 *Internal face fix only. For reveal & external sizes speak to the Roché office. Note: Three phase motor applications enclosure sizes will vary dependent on the overall shutter size. BOTTOM LATH / GUIDE CHANNELS Galvanised steel or extruded aluminium guide channels and bottom slat with brush and rubber weather seals. Galvanised steel section bottom rail in 'T' shape. Guide channel depth is 44mm with a 65mm face. Guide channels are bolted onto angle for face fixed installations, or to 5mm wall steel box section for reveal fit. Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour. OPERATION Electric: Single phase tubular motor via wall switch or three phase motor via push button control station. Note: Three phase motors can be direct drive, inboard or outboard design and final configuration will be project specific. High security wired or wireless key-pad for installation on the 'attack' face of an opening. Manual override facility as required by lockable removable handle for tubular motors or haul chain for externally mounted motors.
P76 ELITE SR1 FRONT FACE VIEW FIXING OPTIONS GUIDE OPTIONS PROFILE VIEW
E77 / V77 ELITE SR2 The E77 Elite & V77 Elite are high security aluminium shutters popular in commercial sites & shop front applications up to 25m². The V77 vision profile has a punched rectangular section enabling see through vision, with polycarbonate inserts to ensure the SR2 rating. The E77 & V77 Elite shutters have been tested and approved by the Loss Prevention Certification Board (LPCB) to LPS1175 SR2 and awarded Secured by Design status. CURTAIN SLAT Double (E77 Elite) & single (V77 Elite) skinned extruded aluminium. The E77 Elite also benefits from a polyurethane insulating core. Colours: White or brown as standard. Option to powder coat any RAL / BS colour. Blind Surface :: E77 Weight per m2 :: V77 Weight per m² (with inserts) :: Maximum Width :: Maximum Surface :: 77mm 8.5kg 9kg 5000mm 25m² ENCLOSURE Roll-formed aluminium box enclosure with pressure-moulded aluminium alloy end caps. Colours: Powder coated any RAL / BS colour as standard. Guide Height (up to mm) 2700 3640 4600 Box Size (mm)* 300 360 400 *Internal face fix only. For reveal & external sizes speak to the Roché office. BOTTOM SLAT / GUIDE CHANNELS Extruded aluminium bottom slat and guide channels with EPDM rubber and brush weather seals. 150mm extruded aluminium guide channels as standard. Colours: Powder coated any RAL / BS colour as standard. Note: To comply with LPCB certification the 150mm guide channel must be installed 30mm from the opening, allowing 180mm from the opening edge to the back of the guide channel. OPERATION Electric: Single phase tubular motor via internal switch or remote control external key switch as standard. Numerous control option variants such as group, remote or mobile phone activation. Manual override facility as required. Manual operation is not available with the Elite.
E77 / V77 ELITE SR2 FRONT FACE & PROFILE VIEW FIXING OPTIONS The E77 & V77 Elite must be faced fixed, either to brick, block, steel section, or aluminium box section. Approved fixings and installation instructions are supplied with the shutter. GUIDE OPTIONS
S76 ELITE SR2 The S76 Elite is a high security solid steel shutter designed for commercial and industrial applications up to 76m². The S76 Elite shutters have been tested and approved by the Loss Prevention Certification Board (LPCB) to LPS1175 SR2, and also awarded Secured by Design status. CURTAIN SLAT Manufactured from solid single skin 76mm (3'') curved steel. Colour: Galvanised finish as standard. Option to plastisol or powder coat any RAL / BS colour. Visible Surface :: 76mm Profile Height :: 85mm Weight per m² :: 19kg Maximum Width :: 7000mm Maximum Surface :: 18m² (single phase tubular motor), 72m² (three phase motor) ENCLOSURE / HOUSING Roll-formed galvanised steel housing and end plates. Shutters below 3m high are supplied with a hood as standard. Colour: Galvanised finish as standard. Option to powder coat any BS / RAL colour. Guide Height (up to mm 2200 3650 4600 6000 7000 Box Size (mm)* 305 355 400 500 600 *Internal face fix only. For reveal & external sizes speak to the Roché office. Note: Three phase motor applications enclosure sizes will vary dependent on the overall shutter size. BOTTOM LATH / GUIDE CHANNELS Galvanised steel section bottom rail in 'T' shape. Guide channel depth is 44mm with a 65mm face. Guide channels are bolted onto angle for face fixed installations, or to 5mm wall steel box section for reveal fit. Colour: Galvanised finish as standard. Option to powder coat any BS / RAL colour. OPERATION Electric: Tubular Motor = NRG Econom tubular motor and internal rocker or external key switch as standard. Safety brake as appropriate to comply with legislation. Manual override and crank handle as required (surcharge applies). Numerous control option variants such as group, remote or mobile phone activation. Three Phase Motor = GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, inboard or outboard design. Numerous control option variants such as timed closure, group, remote or mobile phone activation. Integration with a building management system is increasingly common in car park applications.
S76 ELITE SR2 FRONT FACE VIEW FIXING OPTIONS GUIDE OPTIONS PROFILE VIEW
i100 ELITE SR3 The i100 Elite SR3 insulated steel shutter is a high security solution recommended for applications where burglary resistance is a priority. The i100 Elite SR3 combines superb thermal performance with exceptional security levels. The i100 Elite SR3 shutter has been tested and approved by the Loss Prevention Certification Board (LPCB) to LPS1175 SR3 and awarded Secured by Design status. CURTAIN LATH Double skin mild steel insulated slat with 81mm face. Wall thickness 1.2mm, with optional insulated core. Colour: Galvanised finish as standard. Option to plastisol or powder coat any BS / RAL colour. BOTTOM LATH / GUIDE CHANNELS Visible Surface :: Profile Height :: Weight per m² :: Maximum Width :: Maximum Surface :: Colour: Galvanised finish as standard. Option to powder coat any BS / RAL colour. 81mm 100mm 37kg 7000mm 35m² ENCLOSURE / HOUSING Roll-formed galvanised steel housing and end plates. Shutters below 3m high are supplied with a hood as standard. Colour: Galvanised finish as standard. Option to powder coat any BS / RAL colour. Guide Height (up to mm) 2600 3500 5000 Box Size (mm)* 400 450 600 *Internal face fix only. For reveal & external sizes speak to Roché office. Note: Three phase motor applications enclosure sizes will vary dependent on the overall shutter size. Steel guide channels and bottom slat with brush weather seals. Guide width 85mm. OPERATION Electric operation with tubular or three phase motor (dependant on size and weight of the shutter). Numerous control option variants such as timed closure, group, remote or mobile phone activation. Tubular Motor = NRG Econom tubular motor and internal rocker or external key switch as standard (other motors available). Safety brake as appropriate to comply with legislation. Manual override facility and crank handle as required. Three Phase Motor = GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, inboard or outboard design. Final configuration will be project specific but all motors incorporate a chain manual override facility.
i100 ELITE SR3 FRONT FACE & PROFILE VIEW FIXING OPTIONS GUIDE OPTIONS
i100 ELITE SR4 The i100 Elite SR4 steel shutter is a high security solution for roller shutter applications. Developed to span larger openings, the i100 Elite SR4 is Roché s most secure shutter. The i100 Elite SR4 shutter has been tested and approved by the Loss Prevention Certification Board (LPCB) to LPS1175 SR4 and awarded Secured by Design status. CURTAIN LATH Double skin mild steel insulated slat with 81mm face. Wall thickness 1.2mm, with concealed reinforcement bars. Colour: Galvanised finish as standard. Option to powder coat any BS / RAL colour. Visible Surface :: Profile Height :: Weight per m² :: Maximum Width :: Maximum Surface :: 81mm 100mm 100kg 7000mm 35m² ENCLOSURE / HOUSING Roll-formed galvanised steel housing and end plates. Shutters below 3m high are supplied with a hood as standard. Colour: Galvanised finish as standard. Option to powder coat any RAL / BS colour. Guide Height (up to mm) 2600 3500 5000 Box Size (mm)* 400 450 600 *Internal face fix only. For reveal & external sizes speak to Roché office. Note: Three phase motor applications enclosure sizes will vary dependent on the overall shutter size. BOTTOM LATH / GUIDE CHANNELS Galvanised steel guide channels and bottom slat with brush weather seals. Colour: Galvanised finish as standard. Option to powder coat any BS / RAL colour. OPERATION Electric operation with tubular or three phase motor (dependant on size and weight of the shutter). Numerous control option variants such as timed closure, group, remote or mobile phone activation. Tubular Motor = NRG Econom tubular motor and internal rocker or external key switch as standard (other motors available). Safety brake as appropriate to comply with legislation. Manual override facility and crank handle as required. Three Phase Motor = GfA Safedrive & Ranger three phase motors with TS959 push button control station as standard. Motors can be direct drive, inboard or outboard design. Final configuration will be project specific but all motors incorporate a chain manual override facility.
i100 ELITE SR4 FRONT FACE & PROFILE VIEW FIXING OPTIONS GUIDE OPTIONS
GRILLES SR1 to SR3 SECURITY GRILLE RANGE Innovative designs and modern manufacturing techniques have led to the development of a high specification range of security grilles for domestic, commercial and public properties. They help retain the appearance of a building and maximise light while still being a deterrent to intruders. Multi point locking systems ensure complete access control, while LPCB approval ensures maximum strength protection. All of our security grilles are built to fit your property, with flexibility on options and RAL powder coating available. GRILLE DESIGN SECURITY LEVELS All grilles have a steel and aluminium construction. They are custom built to fit any opening and have a fully retractable designs. A choice of X or S shaped lattices is available on the Classic X1 / S1. Vulcan X2 and Eclipse X3 are X shaped lattice only. Many of Roché s LPCB grilles are approved by the Loss Prevention Certification Board and have Secured by Design Status. STANDARD FEATURES Single or double grid design. Top hung or bottom rolling design for smooth running and ease of use. Excellent through-vision when locked. Multi-point locking from a single key. Pre-treated to ensure corrosion resistance and powder coated in white as standard. OPTIONS Hinged & lift out bottom track for doorways. Swivel return stack. Alternative RAL colours. Locking post at both ends to provide maximum flexibility of operation. Where access is not required the grille can have a fixed sash / cage design. Classic X1 / S1 The Classic retractable security grille is popular in high security domestic and commercial applications. Tested by the LPCB to LPS 1175 Security Rating 1. Vulcan X2 Vulcan X2 retractable security grilles are designed for very high security commercial applications. Tested by the LPCB to LPS 1175 Security Rating 2 and bolt cutter resistant. Eclipse X3 Eclipse X3 retractable security grilles are designed for maximum security applications. Tested by the LPCB to LPS1175 Security Rating 3, bolt cutter resistant and approved by the CPNI for UK Government use. A Diamond X / S grille is also available for low risk properties which do not require LPCB / insurance approved status.
The Fort Offices, Artillery Business Park, Park Hall Oswestry, Shropshire, SY11 4AD www.rocheystems.co.uk