Xitanium LED driver Datasheet Xitanium LED drivers spot- and downlight Enabling future-proof LED technology Our Xitanium prograable window LED drivers ensure OEMs have complete flexibility and control in producing high quality luminaires. vailable in application dedicated form factors, our LED point drivers provide further customization via wide operating windows. dditionally, almost all drivers feature the following specifications:, improved ripple current, temperature derating, hot wiring, providing OEMs the tools to produce, and even alter later if necessary, premium downlights and spotlights. enefits Features pplication High reliability underpinned by 5 year Operating windows - output current can be adjusted Retail via the Philips MultiOne configurator ('TD' drivers) or Office warranty Future-proof flexibility - with a resistor outside the driver or SimpleSet application-oriented operating Power ratings: 10-75W windows enable LED generation and hoice of housing designs -linear housing for tracks in complexity management ompatibility - can also be used for other manufacturers' modules or OEMs' own P designs '3 in 1' in design, conventional HID housings for down and Spotlighting and WH housing for independent use with strain relief and loop through
Electrical input data Nominal input voltage 220...240 Vac performance range Nominal input frequency 50...60 Hz Nominal input current 0.18 Input voltage 230 Vac Nominal input power 42 W Power factor 0.9 Total harmonic distortion 20 @ full load. See graph. Efficiency 87 @230V @ full load Nominal input voltage D 186...250 Vdc Nominal input current D 0.18 Input voltage 230 Vdc, full load Input voltage 202...254 Vac Operational range Input frequency 47.5...63 Hz Operational range Isolation Input to Output @230V @ full load @230V @ full load @ full load. See graph. Electrical output data Regulation method onstant urrent Output voltage 24...48 Vdc Output voltage max. 60 V Peak voltage at open load Output current 0.3...1 Full output current setting Output current tolerance ±5 Output current ripple LF 4 Ripple = peak / average Output power 11...36 W Full output ontrol method Fixed Galvanic Isolation Electrical data controls input Logistical data Product name Order code Logistic code 12N 9290 014 04306 EN3 Pieces per box 2/7 10
Wiring & onnections Input wire cross-section 0.2...1.5 2 WGO250 (3.5 ), solid / stranded wire 16...24 WG WGO250 (3.5 ), solid / stranded wire Input wire strip length 8.5...9.5 Output wire cross-section 0.2...1.5 2 WGO250 (3.5 ), solid / stranded wire 16...24 WG WGO250 (3.5 ), solid / stranded wire Output wire strip length 8.5...9.5 Maximum cable length 600 Total length of wiring including LED module, one way Insulation Insulation input output input output Dimensions and weight Length (1) 190 Width (1) 46 Height (1) 32 Fixing hole diameter (D1) 4.2 Fixing hole distance (2) 154 Weight 180 gram 3/7
Operational temperatures and humidity mbient temperature -20...+50 º Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 90 º Maximum temperature measured at Tcase-point Tcase-life 80 º Measured at Tcase-point Maximum housing temperature 110 º In case of a failure Relative humidity 10...90 Non-condensing mbient temperature -25...+85 º Relative humidity 5...95 Non-condensing Driver lifetime 50,000 hours Measured temperature at Tcase-point is Tcase-life. exceeded. Storage temperature and humidity Lifetime Maximum failures = 10 Mains switching cycles >3 switches See Design-in guide for detailed explanation Remark Set output current (O) LEDset, SimpleSet See Design-in guide. Default output current: = 300 m orridor mode No Energy metering No Diagnostics No Remark Prograable features Features Open load protection utomatic recovering Short circuit protection utomatic recovering Over power protection utomatic recovering Hot wiring Suitable for fixtures with protection class I and II per IE60598 ertificates and standards pproval marks E / ENE Ingress Protection classification 20 4/7
Inrush current Inrush current Ipeak 14.5 Input voltage 230V Inrush current Twidth 220 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16 type 32 pcs M Rating Relative number of LED drivers 10 63 13 81 16 100 (stated in datasheet) 20 125 25 156 10 104 13 135 16 170 20 208 25 260 Driver touch current Typical touch current < 0.7 m peak cc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv cc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv cc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us kv DLI - L/N/Ls acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Surge iunity DLI surge iunity (co. mode) 5/7
Graphs Operating window Power factor versus output power 6/7
Efficiency versus output power THD versus output power 2016 Philips Lighting.V. ll rights reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Data subject to change. Date of release: November 9, 2016 www.philips.com/technology