MKT8 Metallized Polyester Film Capacitors MKT Radial Type FEATURES.0 mm to. mm lead pitch Self-healing properties Flame retardant case Material categorization: For definitions of compliance please see www.vishay.com/doc?999 APPLICATIONS Blocking, bypassing, filtering, timing, coupling and decoupling circuits, interference suppression in low voltage applications. QUICK REFERENCE DATA Capacitance range (E series) pf to μf (preferred values according to E6) Capacitance tolerance ± 0 % (M), ± % (K), ± % (J) (on request) Climatic testing class according to IEC 60068 /0/6 Reference standards IEC 6084- Dielectric Polyester film Electrodes Vacuum deposited aluminum Construction Extended metallized film Encapsulation Flame retardant plastic case UL-class 94 V-0 Leads Tinned wire Marking Manufacturer s logo; type; C-value; rated voltage; tolerance; date of manufacture Temperature range - C to +0 C Rated DC voltage 6 V DC, 0 V DC, 0 V DC, 400 V DC, 60 V DC, V DC Permissible AC voltages (RMS) up to 60 Hz 40 V AC, 6 V AC, 60 V AC, 00 V AC, 0 V AC Capacitance drift Up to +40 C, ±. % for a period of two years Derating for DC and AC category voltage U C At +8 C: U C =.0 U R At +0 C: U C = 0.8 U R Self inductance ~ 6 nh measured with mm long leads Pull test on leads 0 N in direction of leads according to IEC 60068-- Note For more detailed data and test requirements, contact dc-film@vishay.com DIMENSIONS in millimeters L Max. W Max. Marking H Max. 0.6-0.4 6 - - 0.4 0.8 Revision: 06-Mar-4 Document Number: 60 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
MKT8 COMPOSITION OF CATALOG NUMBER MULTIPLIER (nf) 4 0 CAPACITANCE (numerically) Example: 468 = 680 nf MKT 8 X XX X X TYPE TOLERANCE Un = 06 = 6 V Un = 0 = 0 V Un = = 0 V Un = 40 = 400 V Un = 6 = 60 V Un = = V 4 6 ± % ± % ± 0 % SPECIAL LETTER FOR TAPED Bulk V/W Reel packaging (8. mm) G Ammopack (8. mm) Note For detailed tape specifications refer to packaging information www.vishay.com/docs?89 or Recommended Packaging table SPECIFIC REFERENCE DATA DESCRIPTION MAX. VALUE Tangent of loss angle: at khz at khz at 0 khz C μf 8 x - x - x - μf < C.0 μf 8 x - x - - C >.0 μf x - - - MAXIMUM PULSE RISE TIME (dv/dt) [V/μs] (mm) 6 V DC 0 V DC 0 V DC 400 V DC 60 V DC V DC 60 8 6. 4 8 9 4. 4 6 4 If the maximum pulse voltage is less than the rated voltage higher dv/dt values can be permitted. R between leads, for C 0. μf and U R 0 V > 000 M R between leads, for C 0. μf and U R > 0 V > 0 000 M RC between leads, for C > 0. μf and U R 0 V > 000 s RC between leads, for C > 0. μf and U R > 0 V > 000 s R between leads and case, 0 V; (foil method) > 0 000 M Withstanding (DC) voltage (cut off current ma); rise time < V/s.6 x U RDC, min Withstanding (DC) voltage between leads and case x U RDC, min Maximum application temperature 0 C Revision: 06-Mar-4 Document Number: 60 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
MKT8 ELECTRICAL DATA U RDC (V) CAP. (μf) CAPACITANCE VOLTAGE V AC DIMENSIONS W x H x L 0. -4 4.0 x 9.0 x.0 0. -4 4.0 x 9.0 x.0 0.4-44. x. x.0 0.68-468. x. x 8.0.0 -. x. x 8.0 6. - 6. x. x 8.0 06 40. -. x. x 8.0. -. x. x 6.. 4. -4 8. x 6. x 6.. 6.8-68. x 8. x 6...0-6. x 0. x...0-6. x. x.. 0.068-68 4.0 x 9.0 x.0 0. -4 4.0 x 9.0 x.0-4 4.0 x 9.0 x.0 0. -4 4. x 9. x.0 0. -4. x. x 8.0 0.4-44. x. x 8.0 0.68-468 6. x. x 8.0 0.0-0 6. x. x 8.0. -. x. x 6... - 8. x 6. x 6... -. x 8. x 6.. 4. -4. x 0. x.. 6.8-68. x. x...0-6.0 x 4. x...0-6 6. x 9. x.. 0.0-4.0 x 9.0 x.0 0.04-4 4.0 x 9.0 x.0 0.068-68 4. x 9. x.0 0. -4. x. x 8.0-4. x. x 8.0 0. -4. x. x 8.0 0 0. -4 60 6. x. x 8.0 0.4-44 6. x 4. x 6.. 0.68-468. x. x 6...0-8. x 6. x 6... - 9.0 x 8. x... -. x 0. x... -. x. x.. 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.004-4 4.0 x 9.0 x.0 0.0068-68 4.0 x 9.0 x.0 0.0-4.0 x 9.0 x.0 0.0-4.0 x 9.0 x.0 0.0-4.0 x 9.0 x.0 400 0.0-4.0 x 9.0 x.0 40 00 0.04-4. x. x 8.0 0.068-68. x. x 8.0 0. -4. x. x 8.0-4 6. x. x 8.0 0. -4. x. x 6.. 0. -4 8. x 6. x 6.. 0.4-44. x 8. x 6.. 0.68-468. x 0. x...0 -. x 0. x... -. x. x.. Revision: 06-Mar-4 Document Number: 60 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
MKT8 ELECTRICAL DATA U RDC (V) CAP. (μf) CAPACITANCE VOLTAGE V AC DIMENSIONS W x H x L 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.004-4 4.0 x 9.0 x.0 0.0068-68 4.0 x 9.0 x.0 0.0-4.0 x 9.0 x.0 0.0 -. x. x.0 0.0-6. x. x.0 60 0.0-6 () 0. x. x 8.0 0.04-4 6. x. x 8.0 0.068-68. x. x 8.0 0. -4 6. x 4. x 6.. -4. x. x 6.. 0. -4 8. x 6. x 6.. 0. -4. x 0. x.. 0.4-44. x 0. x.. 0.68-468. x. x...0 -.0 x 4. x.. 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.00-4.0 x 9.0 x.0 0.004-4. x. x.0 0.0068-68 6. x. x.0 0.0 -. x. x 8.0 0.0-6. x. x 8.0 0.0 - () 0. x. x 8.0 0.0-6. x 4. x 6.. 0.04-4. x. x 6.. 0.068-68 8. x 6. x 6.. 0. -4. x 8. x 6.. -4. x 0. x.. 0. -4. x. x.. 0. -4 6. x 9. x.. 0.4-44 0.0 x.0 x.. Note () Not suitable for mains applications. RECOMMENDED PACKAGING LETTER TYPE OF PACKAGING HEIGHT (H) (mm) Notes () S = Box size mm x mm x 40 mm (W x H x L) () L = Box size 60 mm x 60 mm x mm (W x H x L) REEL DIAMETER (mm) ORDERING EXAMPLES. TO. D Ammo 6. S () MKT8-4-06-D X X - G Ammo 8. S () MKT8-4-06-G X X - F Reel 6. 0 MKT8-4-06-F X X - W Reel 8. 0 MKT8-4-06-W X X - V Reel 8. 00 MKT8---V - X X G Ammo 8. L () MKT8---G - - X - Bulk - - MKT8-- X X X - Bulk - - MKT8-- X - X Revision: 06-Mar-4 4 Document Number: 60 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
MKT8 PERMISSIBLE AC VOLTAGE VS. FREQUENCY 0 0. 0.68 Capacitance in μf Capacitance in pf and μf 6 V DC 4.. 6.8 0. 00 400 0.0 0.0 0.04 0. 0.4 400 V DC 4 0 Capacitance in μf 0. 0.68.. 4. 0 V DC 4 0 60 V DC Capacitance in pf and μf 00 400 0.0 0.0 0.04 0. 0.4.0 4 Capacitance in μf Capacitance in pf and μf 0 0.0 0.04 0. 0.4.. 0 V DC 4 0 0.0 0.0 0.04 0. 0.4 00 400 V DC 4 Revision: 06-Mar-4 Document Number: 60 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?9
Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 0/6/EU of The European Parliament and of the Council of June 8, 0 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 00/9/EC. We confirm that all the products identified as being compliant to Directive 00/9/EC conform to Directive 0/6/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS09A standards. Please note that some Vishay documentation may still make reference to the IEC 649-- definition. We confirm that all the products identified as being compliant to IEC 649-- conform to JEDEC JS09A standards. Revision: 0-Oct- Document Number: 9