FTTH SOLUTION OLT 9P Contral Office V-ONT FDF 10P 6P Sleeve PLC Splitter Apartment ONT 2.5G SFT 8P Patchcord V-ONT Optical hub 12P Cross Tap Fiber Closure 11P Field Installable 13P Connector Plier house Fiber Closure 9P 13P Cable Clamp 11P Access Terminal Box(ATB) 11P Access Terminal Box(ATB) 10P 6P Sleeve PLC Splitter house 13P Cable Clamp 4P Field Installable Connector OTP BOX 9P 10P 6P Sleeve PLC Splitter 11P Access Terminal Box(ATB) Field Installable Connector Field Installable 11P Power Drop Cable 14P Meter 10P Mechanical Splice 2 3 4P 14P Power Meter 9P Mechanical Splice Content
Field Installable Connector The patented Goldtel s Field Installable Connector (FIC) is cost-effective, and is designed for reuse, ease of installation, optical attenuation from 1dB to 20dB, and Fiber Bragg Grating (FBG) for fiber line monitoring system. FIC requires no field polishing or epoxy, so no heat cure devices or special tools are needed to terminate the fiber. It takes about one to two minutes per fiber to install a connector out in the field. SC / LC / FC / ST Round / Flat Screw Type Connector type : SC / LC / FC / ST Fiber Type : SM, OM1, OM2, OM3, OM4 Round Cable : ø3.0 ~ ø4.0mm Flat Cable : 1.6 x 2.0mm / 2.0 x 3.1mm Round Type AND BENEFITS Cost Effective and Reusable Easy to deploy fiber solution, such as FTTH, Optical Networks Applicable for Field installable attenuator and FBG (Fiber Bragg Gratings for fiber line monitoring system) No field polishing or epoxy required Patent: Patent No.: US 7,712,971 B2, Japan 4503648, EU 1774381, and Korea 0507543 Flat Type 3.0 ~ 4.0mm SC / LC Type (Insert Guide Type) 0.25 / 0.9mm Connector type : SC, LC Fiber Type: SM, OM1, OM2, OM3, OM4 Cable: ø0.25 / ø0.9mm 1.6 x 2.0mm 2.0 x 3.1mm Screw Type 2.0 / 3.0mm Connector type : SC, LC Fiber Type: SM, OM1, OM2, OM3, OM4 Cable: ø2.0 / ø3.0mm Charateristics SM MM Fiber Type 9/125μm OM1, OM2, OM3, OM4 Insertion Loss Max. 0.5dB, Avg. 0.3dB Max. 0.5dB, Avg. 0.3dB Reflectance 40-50dB(PC/UPC), 50-60dB(APC) - Crimp Type 2.0 / 3.0mm Connector type : SC, LC Fiber Type: SM, OM1, OM2, OM3, OM4 Cable: ø2.0 / ø3.0mm Operational Temperature -40 ~ 85 C 0.25 / 0.9mm : 3N Load 0.2dB Change Tensile Load 2.0 ~ 4.0mm & Flat Cable : 30N Load 0.2dB Change 4 5
PLC Splitter The Optical Power Splitter, one of the main products of our company, is a component used in FTTH to separately transmit the signal that are sent from the telephone office or the cable through a single optical cable to multiple membership locations (apartments and houses), thereby constituting a key component of the optical membership network. TECHNICAL 1 N 1 2 1 4 1 8 1 8 1 16 1 32 1 64 Operating Temperature -40 ~ 85 C Wavelength Range 1260nm ~ 1610nm Maximum Input Power 500mW IL (MAX) 3.8 7.2 10.5 10.5 13.7 17.0 20.4 Uni (MAX) 0.6 0.6 0.8 0.8 1.2 1.5 1.8 PDL (MAX) 0.2 0.2 0.3 0.3 0.3 0.3 0.3 Core pitch (um) 250um 250um 250um 127um 127um 127um 127um Dimension LxWxH (mm) Ribbon type 40 4 4 55 7 4 55 7 4 60 12 4 Mini type 55 7 4 60 12 4 80 20 6 100 40 6 Note Fiber : 657A1 Input : 250um Bare fiber / 0.9mm tight buffer without connector or with connector Output : Ribbon fiber with fanout / 0.9mm Loose tube without connector or with connector Standard : In & Out 1M (Available customized specification) 2 N 2 2 2 4 2 8 2 16 2 32 2 64 Operating Temperature Wavelength Range Maximum Input Power -40 ~ 85 C 1260nm ~ 1610nm 500mW IL (MAX) 4.4 7.6 10.8 14.3 17.6 21.8 Uni (MAX) 1 1 1 1.5 1.8 2.5 PDL (MAX) 0.2 0.3 0.3 0.3 0.3 0.4 Core pitch (um) 250um 250um 127um 127um 127um 127um Compliant with IEC, JIS and Telcordia Low Insertion Loss and high return loss Various Connector type (SC, LC, FC, ST) available Designed for various type of the cable 100% In-house tested APPLICATIONS Fiber Optic Telecommunications Optical Network Equipments FTTH CATV, IPT High Speed Transmission System Dimension LxWxH (mm) Note Ribbon type 50 5 4 60 7 4 65 12 4 Mini type 60 7 4 60 12 4 80 20 6 100 40 6 Fiber : 657A1 Input : 250um Bare fiber / 0.9mm tight buffer without connector or with connector Output : Ribbon fiber with fanout / 0.9mm Loose tube without connector or with connector Standard : In & Out 1M (Available customized specification) 6 7
Patchcord Low Insertion Loss High Return Loss Various Connector type available 100% In-house tested *APC 9 Available APPLICATIONS Fiber Optic Telecommunications Optical Network Equipments FTTH CATV, IPTV High Speed Transmission System Fiber Mode Single Mode Multi Mode Type SC, LC, FC, ST, MU(MPO) SC, LC, FC, ST, MU Cable Diameter 0.9, 2.0, 3.0mm 0.9, 2.0, 3.0mm Ferrule end face UPC APC PC Insertion Loss 0.3dB 0.3dB 0.3dB Return Loss 55dB 60dB - Operating Temperature -40 ~ 85 C Temperature Stability 0.3dB Fixed Attenuator Low Insertion Loss Compact Package Good Repeatability and Changeability High Reliability and Stability APPLICATIONS Telecommunication Networks Active Device Termination FTTH CATV Networks, LAN Testing Equipments Characteristics Conditions Values Insertion Loss (db) - 0.15 db Durability 500 matings 0.2 db Operating Temperature -40~ 85 C 0.2 db Humidity Cycling 75 C, 95% / 336hr 0.2 db Vibration 10 ~ 55Hz(2hr) 0.2 db Impact 1.5m drop, 8 times 0.2 db Mechanical Splice The Mechanical Splicer (GMS) is cost-effective, and is designed for reuse and easy installation. The GMS requires no special tools for splicing. It takes approximately one to two minutes per fiber to install a mechanical splice in the field. < Assembly Guide > < Mechanical Splice > Low Back Reflectance Loss Precise Control of Attenuation Range High Power Endurance APPLICATIONS LAN, Cable TV System Coherent Optical Communication High Speed Transmission System EDFA Characteristics Operating Wavelength Attenuation Tolerance Return Loss Attenuation Range 1~10dB 11~30dB UPC APC SM 1260 / 1620nm 1 ~ 35dB ±0.5dB ±10%dB 55dB 60dB Operating Temperature 40 ~ 75 C Humidity 95%RH Dimensions 40mm(L) 4mm(W) 4mm(H) Fiber Diameter 125μm Coating Diameter 250 / 900μm Insertion Loss (db) Max. 0.2, Avg. 0.1 Reflectance(dB) 40 Operating Temperature 40 ~ 75 C Tensile Load (on 250μm) 3N Load 0.2dB Change * Assembly Guide is Optional. (reusable) 8 9
Drop Cable Mechanical Splice It does not need the cable sealing task in the mechanical splicer Access Terminal Box (ATB) Goldtel has designed Access Terminal Box (ATB) for protecting and terminating fiber optic drop cable and/or pigtails in the FTTH networks. ATB is compact and cost-effective, and being used for the indoor closure. This ATB accommodate the field-installable connector, fusion splice, 1x4 splitter and 1x4 coupler. *Size: 67 x ø5 (mm) It keeps the severed drop cable safely from external shock splice without reconnecting any mechanical splice. Safety Protection Unlimited space task * Similar method with field installable connector Advantage Sleeve Strength Member: stainless steel & quartz Ease of use and quick installation Safe protection to optical fiber splicing Temperature and humidity tolerant Protection for 4, 8, and 12 cores (Ribbon Sleeve) PRODUCT LIST No extra expense for any splice High operation efficiency Eligible reusing and ease of installation Available to the fiber fence AND BENEFITS Compact design for installation on the wall as well as inside the terminal panel. Two screw mounting holes can be compatible with the size of the wall switch and telephone box. This box protects drop cable and other related optical fiber connection from accidental damage. Two inner holders retain up to two fusion splice sleeves or splitters/couplers. Inner storage area allows the minimum bend radius to prevent micro bends and attenuation. Removable cover is designed for easy access. Dimension 117mm(L) x 88mm(W) x 29mm(H) Weight (g) 75 Cable inlet 1 capacity Color Connection Type Field Installable 2 pcs Duplex SC / 4 pcs simplex SC Gray or White Fusion splice, Mechanical splice or Field assembly connector Item No. Pin Strength (mm) Supplied I.D Recovered O.D Overall Length ST-15-60 Φ1.5 58±0.1 1.3±0.1 2.6±0.2 60±0.1 ST-10-60 Φ1.0 58±0.1 1.6±0.1 2.4±0.2 60±0.1 ST-10-45 Φ1.0 43±0.1 1.6±0.1 2.4±0.2 45±0.1 ST-10-40 Φ1.0 40±0.1 1.6±0.1 2.4±0.2 42±0.1 ST-R-30 (4 cores) 2mm Half Quartz 1.8 / 1.2 30 2.7 40 ST-R-40 (8, 12 cores) 4mm Half Quartz 3.6 / 1.0 40 5.0 40 Shrinking Temperature 90 ~ 120 Normal Operation Relative Humidity 90% Radial Shrinking Rate (%) >50 Spark-over-Strength (kv/mm) 20 Axial Shrinking Rate (%) <3 Tensile Strength (Mpa) 20 Low Temperature Property No Crack at -55 C lasting 4 hours Loss at -40 C 0.01dB Normal Operating Temperature -40 ~ 65 C Loss at +60 C, RH95% 0.01dB The Field Installable is cost-effective, easy installation for quick connection of splitter. To maximize the space efficiency for the wall-mount box, it is designed as a hybrid type of connector that combines the field installable connector and the fiber optic adapter. It takes approximately one to two minutes per fiber to install field installable adapter in the field. Characteristics SM SC MM SC Fiber Type Single Mode : 9/125μm Multi Mode : 50/125μm, 62.5/125μm Insertion Loss Max. 0.5dB Avg. 0.3dB Max. 0.5dB Avg. 0.3dB Reflectance 40-50dB(PC/UPC), 50-60dB(APC) Operating Temperature 40 ~ 85 C 10 11
Cross Tap This is for arrangement outdoor extra cable on the pole Cable Clamp A Type (Small) B Type (Big) TECHNICAL Type A Type (Small) B Type (Big) Radius of curvature 160mm 220mm Inside Diameter 18mm 23mm weight 220g 415g quality High strength PC High strength PC Cable diameter Below 16mm Below 22mm FUNCTION 1 2 Used to support messenger drop cable between the pole and house Accepts 3.0mm diameter fiber optic drop cable Suitable for usage with most one and two pair drop cables Stainless steel tail wire, plastic (PVC) body RoHS compliant Mechanical (tensile) strength exceeds 50kg Patented Connector Plier Dimensions 220mm(L) 20mm(H) 40mm(W) Bending Radius Allowance > 25mm Tensile Load 50kgf Material for Tail wire SUS-304 Material for Body PVC Operating Temperature -30 ~ 40 C CP-1-1 ( SC ) CP-1-2 ( SC & LC ) 3 Design for easy use with one hand Safe and easy installation and removal of optical connector. Excellent performance in areas of densely populated connections Accident Prevention from worker s carelessness High Reliability and Stability PRODUCT LIST Item CP-1-1 CP-1-2 Connector Type SC Type only SC & LC type Dimensions Weight 237mm(L) 67mm(W) 14mm(H) 85g 12 13
Power Meter (GTMPM-V10) Patent and Certification INTRODUCTION The GTMPM-V10 is easy-to-use testing instruments for optical fiber network. The optical power measurement results could be displayed in logarithmic (dbm), and relative power (db) modes. The user can choose one of these modes for absolute power or relative loss measurements. In additional, Visible Ray Failure Checking, LED, and Network test functions are integrated in GTMPM-V10. Optic Power meter function Visible Ray Failure Checking function LED function Network test function ACCESSORIES Standard FC Connector(1), User s manual(1), Calibration certification(1) Option - Carrying bag(1), SC connector(1), ST connector(1), AC/DC adapter(1), Net Test Part 2(1) Display Range 10/1490/1550/1625: +10 ~ -70dBm 1310/1490/1550/1625: +26 ~ -50dBm 850/1300: +10 ~ -60dBm 850/1300: +26 ~ -40dBm UL(FIC) US(FIC) Accuracy * ±0.2dB Calibrated Wavelengths 850nm / 1300nm / 1310nm / 1490nm / 1550nm / 1625nm Display Resolving Power 0.01dB Linearity ±0.1dB OPM Connector 2.5mm universal and FC (SC, ST adapter is option) VFL Connector 2.5mm universal Net Test RJ-45 and RJ-11 Automatic Power Off No operation in 10 minutes (can be cancelled), Low battery energy Battery Charge Yes Battery Life Above 100 hours (OPM) Storage Temperature -20 ~ 60 C, < 90%RH Operating Temperature -10 ~ 50 C, < 90%RH Power Supply AA 2 batteries or AC/DC power supply adapter Size 105mm 52mm 34mm Weight About 100g EU(FIC) Japan(FIC) 14 15
www.n-goldtel.co.kr Company Profile CEO GREETING The Goldtel is a leading company manufacturing mainly the field Installable Connector and selling the fiber optic products related to FTTH and Optical Networks in Gwangju, South Korea. Having 20 years of experience since 1988, we will provide you with the most compatible products, which should be tested fully one by one and inspected with highly advanced measurement system before packaging and shipping. We are always ready to listen to your voices, any suggestions, and all kind of feedbacks. And we will keep running for satisfying you with the best quality in the world. Fiber Optic Solution for FTTH GOLDTEL Co., Ltd. 50, Cheomdan venture so-ro 15 beon-gil Buk-Gu Gwangju-City, Korea, 500-460 TEL. +82-62-607-0100 FAX. +82-62-607-0114 Website : www.n-goldtel.co.kr E-mail : sales@goldtel.co.kr