Neon Flex 0
Table of Contents Introduction 0. Specifications & Parameters 04. Dimensions of Light. Technical Parameters. Optical Parameters. Functions & Features. Product Features. Minimum Bend Diameter 0. Types of Connector 0. Injection-Moulded Connector. Sleeve Connector. Screw Connector.4 Clasp Connector 4. Mounting Profile 09 4. Standard Aluminum Profile 4. Plastic Profile 4. Self-locking Aluminum Profile. Packaging 0 6. Appendix 6. Product Naming Convention 6. Third-Party Test Report 6. Certificate 6.4 Reliability Test of Light 6. Figures of Typical Characteristics 6.6 (X,Y) Chromaticity Diagram 6.7 Wavelength of Color Light 6.8 Power Using Criterion 6.9 Correlated Color Temperature 0
Introduction Neonflex is a member of the Artist of Light series with smooth domed profile that allows various monochromatic lighting solutions and produces superior homogenized illumination along its full length. Neonflex is ULcUL, CE, TUV and RoHS compliant. Moreover, it has passed environmental resistance, optical, mechanical and electrical tests in our lab under the support of advanced experimental equipments and technology to ensure it meets the requirements of harsh environments. Also it has passed relevant tests of third party inspection authority. Fully encapsulated in the flexible PVC chamber by utilizing consummate extrusion technology, assembled with multiple patented connectors to achieve IP68 protection, easy for installation and applicable for various circumstances. Neonflex features large view angle of 70 degree, bright and uniform continuous illumination, and ultra flexibility with small bend diameter in curve bending shape. Applications:. Outdoor or Indoor ContourBorder Lighting. Architectural OutlineDecorative Lighting. CoveAccent Lighting 4. FacadeFloor Lighting. SignageStage Lighting 0
. Specifications & Parameters. Dimensions of Light Light surface 9mm.mm Note: Unless otherwise stated, the tolerance of the light is ±0.mm.. Technical Parameters Technical Parameters Article No. Color Working Voltage Rated Powermtr LED Qtymtr LED Distance Min. Cutting Unit Min. Cutting Length Continuous Length Weightm Storing Temp. Working Temp. Operating Temp. IP Rating Neonflex RedAmber DC 4V 7.W 60LEDs 6.67mm 0LEDs(unit) 6.7CM(unit) M 490g -0~60-0~4 0~4 IP68IP6IP40 Neonflex Warm WhiteWhiteGreenBlue DC 4V W 60LEDs 6.67mm 6LEDs(unit) 0CM(unit) 0M. Optical Parameters Candle Power Distribution Article No. Neonflex LED Type SMD Beam angle 60 Color Wavelength Lumenm Powerm Color CCT Lumenm Powerm Red 60-60nm >0lm 7.W 00K 00±K >40lm W Green 0-0nm >80lm W 400K 400±K >40lm W Blue 46-47nm >40lm W 700K 7±4K >80lm W Amber 8-9nm >90lm 7.W 000K 04±7K >80lm W 00K 46±4K >80lm W 4000K 98±7K >80lm W 400K 40±4K >80lm W 000K 08±8K >80lm W 700K 660±K >80lm W 600K 60±0K >80lm W 04
0 0. Functions & Features. Product Features. High quality and high brightness SMD LED chip.. Variety of monochromatic lights for option including Red, Green, Blue, Amber and White light(00k to 700K).. UV & flame resistant construction(pvc). 4. Domed profile for large viewing angle(70 ).. High color consistency&smooth illumination with no light dots. 6. Flexible with 0mm minimum bending diameter. 7. Easy installation and assembly with DIY accessories for joining and terminating. 8. High IP rating(ip68). 9. Continuous length up to m(r,a)0m (G, B, W) by powering one end. 0. Environmentally friendly & energy efficient.. Automated production, high reliability & long warranty.. years life span (Do not continuously operate over 8 hours per day).. Minimum Bend Diameter Light Surface Φ0 mm 0 0 0 0 Light Surface 0 0 The light can only be bent laterally (opposite bend along to light surface). Do not bend smaller than allowed minimum bend diameter.. Types of Connector. Injection-moulded Connector Injection-moulded Front Connector (bottom) 6.mm.mm Connects light to power supply with pre-installed bottom feed cable, IP68. Cable length available in 0.m, m, m, m, 0m, m, 0m. 0.mm.mm 0.mm 8mm 0
Injection-moulded Front Connector (side) 6.mm.mm Connects light to power supply with pre-installed side feed cable, IP68. Cable length available in 0.m, m, m, m, 0m, m, 0m. 9mm.mm 9mm 0mm Injection-moulded Front Connector (top end) Connects light to power supply with pre-installed end feed cable, IP68. Cable length available in 0.m, m, m, m, 0m, m, 0m. Φ0mm 0.mm Φ0mm.mm 0mm 6.mm Injection-moulded End Cap 6.mm mm Pre-installed termination protection of the light, IP68. 0.mm 0.mm.mm 0mm. Sleeve Connector Sleeve Front Connector 4mm Connects light to power supply. IP40 DIY connector. Cable length available in 0.m, m, m, m, 0m, m, 0m. Feed connector (Two-pin) PC cover Anti-skidding clips Heat-shrink tube 7.mm mm Sleeve End Cap Termination protection of the light. IP40 DIY connector. Tail plug Shading sheet Heat-shrink tube 7.mm 0mm mm Sleeve Jumper Connects two pieces of lights together with a flexible cable. IP40 DIY connector. L available in 0.m, m and m. L Double-end feed connector (Two-pin) PC cover Anti-skidding clips4 Heat-shrink tube 06
Sleeve Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP40 DIY connector. L and L available in 0.m. T joint (Two-pin) PC cover Anti-skidding clips4 Heat-shrink tube L 0mm L. Screw Connector Screw Front Connector Connects light to power supply. IP68 DIY connector. Cable length available in 0.m, m, m, m, 0m, m, 0m. mm Feed connector (Two-pin) Silicone gasket Aluminum mounting piece Anti-skidding clip 7mm mm Screw End Cap Termination protection of the light. IP68. DIY connector. mm Tail plug Silicone gasket Aluminum mounting piece Anti-skidding clip mm 7mm Screw Jumper Connects two pieces of lights together with a flexible cable. IP68 DIY connector. L available in 0.m, m and m. L Double-end feed connector (Two-pin) Silicone gasket Aluminum mounting piece Anti-skidding clip Screw Power T-feed 0mm Connects two pieces of lights together with a T joint, energized from middle. IP68 DIY connector. L and L available in 0.m. L T joint (Two-pin) Silicone gasket Aluminum mounting piece Anti-skidding clip L 07
.4 Clasp Connector Clasp Front Connector Connects light to power supply. IP68 DIY connector. Cable length available in 0.m, m, m, m, 0m, m, 0m. Feed connector (Two-pin) Silicone gasket U steel plate Anti-skidding clip 6mm 7.mm mm Clasp End Cap Termination protection of the light. IP68 DIY connector. Tail plug Silicone gasket U steel plate Anti-skidding clip 47.mm mm 7.mm Clasp Jumper Connects two pieces of lights together with a flexible cable. IP68 DIY connector. L available in 0.m, m and m. L Double-end feed connector (Two-pin) Silicone gasket U steel plate Anti-skidding clip Clasp Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP68 DIY connector. L and L available in 0.m. T joint (Two-pin) Silicone gasket U steel plate Anti-skidding clip L 0mm L Seamless Middle Connector Connects two pieces of lights together seamlessly. IP40 DIY connector. Silicone gasket Joint PCB U steel plate Anti-skidding clip 7.mm 6mm mm 08
4. Mounting Profile 4. Standard Aluminum Profile mm.8mm L mm L Model WH(mm) Standard Length ( L:mm) L (mm) L (mm) Screw Hole (Φ:mm) Hole Number For Product 0 F, F, F 0 F, F, F K07.8 00 000 0 00 90 00 F, F, F F, F, F 000 00 00 0 F, F, F 4. Plastic Profile L L mm Model WH(mm) Standard Length ( L:mm) L (mm) L (mm) Screw Hole (Φ:mm) Hole Number For Product 00 0 00 F, F, F 00 0 00 F, F, F FR04 44 000 000 00 00 00 00 0 F, F, F F, F, F 09
4. Self-locking Aluminum Profile (Using with the Clip).7mm 6.8mm L L L4 L L L Model WH(mm) Standard Length(L:mm) L(mm) L(mm) L(mm) L4(mm) Hole Screw(Φmm) Hole Number Clip Number 7. 7. 0 FR004 6.8.7 00 00 00 0 00 000 00 00 0 0 000 00 00 0 0 6.Packaging Packaging Method Plastic Plate White Box Carton Packaging Detail Light Length White Box Dimension (cm) Carton Dimension (cm) Numbers of White Box Carton Weight (kg) m 9.0 48 4 0m.6 648 6 0m.6 647. 6 0m 68.79 870. 0
6. Third-Party Test Report Testing Item RoHS IP68: Screw type IP68: Clasp type Testing Organization SGS TUV SUD SGS Report Number CANECl060 A0 68.40..6.0 GZESl40000 GZESl400040 GZESl40000 GZESl400070 GZESl400080 IPX8: Molding type Flame retardant IK08 Temperature risen UV: Light UV: PVC SGS TUV SUD TUV SUD UL AOV AOV SZESl40070 SZESl400740 SZESl40070 68.40..068.0 68.40..7.0 UL file E6009-Test Record- Datasheet A00R00806 R0 A00R00806 R0 >>Note: The testing reports and certificates are available from the related official website. 6. Certificate Certificating Type Testing Organization Certificate Serial Number Report Reference CE-EMC SGS SZEMl40007680V SZEMl40007680 CE-EMC TUV Rheinland AE 074407 000 7070 00 CE-LVD TUV Rheinland AE 0768 000 706967 00 UL & cul UL 0047-E6009 E6009-00
6.4 Reliability Test of Light Testing Item Classification Reference Criterion Testing ConditionMethod Result IP Rating Test IP6IP68 m IEC609 Pass High Temperature Storing IEC 68 60 Pass High Temperature and Humidity Impact IEC 68 70. 9%Rh Pass Corrosion Resistance Test in Swimming Pool Water Refer to test report Environmental Test Corrosion Resistance Test in Artificial Sea Water Refer to test report Corrosion Resistance Test in Volatile Oil Refer to test report Salt Spray Test IEC 68 Spray continuously for 96 hours and the concentration of NaCl solution is % Pass UV Test ISO 489 0.76Wm, UVA 一 40nm, 6 Refer to test report Optical Test Light Spectrum Candela Distribution ANSI C78.77 LM 79 Refer to test report Refer to test report Bending Test Bending Diameter cm >00 times Mechanical Test Torsion Test Swing Test Twisting Angle: -80 ~80, Rotating Speed:700 min Swinging Angle: -90 ~90, 70 timescycle; lift weight:00g >00 cycles >Screw 70 times >CLasp 0 times Tensile Test Increasing the strength gradually till PCB break >68kg.f Electrical Test Insulation Resistance Electrical Continuity IEC6098 IEC6098 Weights were added on the connector for min >MΩ >4kg.f >>Note: Please contact us for related test report. 6. Figures of Typical Characteristics Power(w) 0 9 8 7 - -0 - -0-0 0 0 0 40 4 0 60 Working Temperature vs. Power T( ) Lumen(lm) 40 400 80 60 40 0 00 4 6 7 8 9 0 Length(m) Luminous Flux vs. Length of Light
V(v) 4.0.0 0.0 8.0 6.0 4.0.0 0.0 0 4 6 7 8 9 0 Length(m) Working voltage vs. Length of Light 6.6 (X,Y) Chromaticity Diagram y 0.46 0.44 0.4 0.40 0.8 0.6 0.4 0. 600K 700K 000K 400K 4000K 000K 00K 700K 0.0 0.8 0.6 0.8 0.0 0. 0.6 0.8 0.40 0.4 0.44 0.46 0.48 0.0 0. 0.4 6.7 Wavelength of Color Light x 0.9 0.8 0.7 0nm 0.6 0. 00nm 0.4 0. 0. 0. 490nm 480nm 0nm cyan blue 0nm 40nm green white 0nm violet 60nm (',') 70nm yellow 80nm 90nm orange red 600nm 60nm 60nm 770nm Red Green Blue 470nm 0.0 40nm 80nm 0. 0. 0. 0.4 0. 0.6 0.7 0.8
6.8 Power Using Criterion Take the percentage of its rated power (power efficiency) as the maximum used power for the product, that is, the using standard of the maximum load power for the standard power supply. Power Supply Configuration Table The maximum number of standard length light for different rated power(pcs) Product Standard Length (m) 8W8% W8% 60W89% 7W89% 80W90.% 00W9% 0W9% 0W9% 8W9. % 40W9% 0W94% 4 6 8 9 9 6 4 6 8 0 4 4 7 9 4 4 7 4 6 0 0 Note:. indicates that this option won t be considered. More than 0 m light should consider double end feed. For example: 8W8%stands for that the rated power is 8W and the power efficiency is 8% 6.9 Correlated Color Temperature ANSI STANDARD Nominal CCT Categories Remark: Nominal CCT Target CCT and tolerance(k) Target Duv and tolerance. Six of the nominal CCTs correspond to those in the fluorescent lamp specification []:700K,000K(Warm White),00K(White),400K(Cool White),000K and 600K(Daylight),respectively.. T is chosen to be at 00K steps (800,900,,6400K),excluding, hose eight nominal CCTs listed in Table.. ΔT is given by ΔT = 0.000008 T +0.06 T+8. Flexible CCT (700-600K) T +ΔT DUVT ±0.006 4. Duv is given by Duv=7700 (T)-44.6 (T)+0.008 4