kitsound.co.uk Warning: To prevent possible hearing damage, do not listen at high volume levels for long periods. For your own safety, please be aware of your surroundings when using these earphones. Not suitable for children. Your product and batteries must be recycled or disposed of properly. Please contact your local recycling centre for more information on proper disposal. All trademarks are acknowledged as the property of their respective owners. Unless otherwise stated their use does not imply that the trademark owner is affiliated with KitSound or endorses the products herein. Please recycle this packaging responsibly. IMMERSE ACTIVE WIRELESS EARPHONES JB. 5329-b / Made in China. KitSound is a trademark of Kondor Limited, 2017. Christchurch, Dorset, BH23 4FL, UK USER MANUAL
Please read this manual carefully before use. Instructions for use Charging the battery Box contents KS Immerse Active Wireless Earphones Magnetic USB charge cable S/M/L earbuds User manual 7 1. Connect the Magnetic charger contact (7) to the Magnetic USB charger (8) 2. Connect the other end of the Magnetic USB charger (8) to a PC USB port or USB mains charger 3. The Charging LED indicator (9) will be red whilst charging, and the LED will turn off when battery is full Note: The first charge may take up to 3 hours to complete. Functions 1. Volume /Previous track 2. LED indicator 3. Multi-function button (MFB) 4. ANC switch 5. Volume+/Next track 6. Microphone 7. Magnetic charger contact 8. Magnetic USB charger 9. Charging LED indicator 2 5 4 6 3 1 Battery information A rechargeable battery powers your device. Unplug the charger from the electrical plug and the device when not in use If left unused, a fully charged battery will lose its charge over time. We recommend a full charge twice a month to ensure battery integrity Please do not leave the device in hot or cold places, such as in a closed car in summer or winter conditions, as it will reduce the capacity and lifetime of the battery Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged 9 8 2 3
Pairing a wireless device 1. Hold the MFB (3) down for 3 seconds. You will see the LED indicator (2) rapidly flash blue and then enter pairing mode 2. Turn on your ios, Android, or Windows device s Bluetooth ON and search for new devices 3. Select KS Immerse Active from the list of found devices. If asked for a passcode, enter 0000 or 1234 and the earphones will then be connected to your device 4. After pairing successfully, the LED indicator (2) will slowly flash blue; you can then answer the phone or listen to your music 5. The next time you switch the earphones on, they will automatically search for and attempt to connect to the last paired device Note: Bluetooth is a trademark of Bluetooth SIG, Inc. This product is in no way affiliated with or endorsed by Bluetooth SIG Inc. Re-pairing or pairing new devices 1. Make sure you have turned off the wireless connectivity on any previously paired devices 2. Follow the Pairing a wireless device instructions from step 1 Functionality Power on Power off To answer a call To end call To reject a call Hold the MFB (3) down for 2 seconds Hold the MFB (3) down for 4 seconds Press the MFB (3) and immediately release Press the MFB (3) and immediately release Press and hold the MFB (3) for 2 seconds and then release Voice control When connected with no music playing, press and hold the MFB (3) (not supported by all devices) Volume+ Volume Previous track Next track Play/Pause Press and hold the Volume+/Next track (5) to increase volume Press and hold the Volume /Previous track (1) to decrease volume Press and immediately release the Volume /Previous track (1) twice Press and immediately release the Volume+/Next track (5) twice Press the MFB (3) down and immediately release 4 5
Using Active Noise Cancelling Push the ANC switch (4) to activate, and the LED indicator (2) will turn white. Warning: We do not recommend that this product is used driving or walking as it will prevent you from hearing warnings that could be a danger to you or others. Note: Active Noise Cancelling will not work when battery has drained. Care for your Immerse Active Please DON T: Get the Immerse Active wet Drop the Immerse Active as this will invalidate your warranty Open up the Immerse Active. There are no user serviceable parts inside Expose the Immerse Active to extreme temperatures or rapid changes of hot to cold or vice versa Charge the Immerse Active if the headset/remote has got wet Please DO: Clean the Immerse Active with a soft dry cloth and no detergents 6 7
Specifications Works with Bluetooth V4.1 Wireless connectivity distance Frequency response Talk time Play time Charge time Standby time Battery type Battery capacity up to 10 m 20 20 khz up to 5 hours up to 5 hours up to 1.5 hours up to 3 months LiPo 80 mah Troubleshooting If you cannot connect the earphones to your device, please try the following: Ensure that the earphones are charged, switched on, paired with and connected to your device. Check the earphones are within 10 metres (30 feet) of your device and that there are no obstructions (such as walls or other electronic devices) between the earphones and the device. The earphones can only pair to one device at a time, so please ensure there are no conflicting wireless devices trying to connect to the earphones If the earphones will not switch off, you can reset them back to normal by putting them on charge If you receive an intermittent signal, please ensure the earphones are fully charged before continuing use If you do not use the earphones for longer than 3 minutes whilst not connected to a device, they will automatically power off to conserve power We hope you ve now got all the information you need to get started, but if you re having problems with anything, please feel free to contact us at: support@kitsound.co.uk 8 9
Please do not attempt to open this product. There are no user serviceable parts inside, in particular if your product has an embedded, non-replaceable battery, do not attempt to access or remove the battery as this may cause personal injury and will damage the product. Making any attempt to open the product or carry out repair voids any and all warranties. Hereby, Kondor Ltd declares that the radio equipment type, KSIMA Immerse Active Wireless Earphones, is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: http://kondor.co.uk/product-documents. We apologise for any inconvenience caused by minor inconsistencies in these instructions, which may occur as a result of product improvement and development. 10