DISC OF SABU STEAM MACHINE (ANCIENT EGYPTIAN TECHNIQUES) Gizo Vashakidze, doctor of geography

Similar documents
Quest Chapter 30. Same hint as in #1. Consider the shapes of lenses that make them converge or diverge.

Rules for Deviation of Light Rays During Refraction

General Physics II. Mirrors & Lenses

(ii) Calculate the maximum height reached by the ball. (iii) Calculate the times at which the ball is at half its maximum height.

PHOTOMETER. Instruction Sheet for the PASCO Model OS Introduction. Equipment. How to Use the Photometer. Photometer

Udaan School Of Mathematics

Heat Exchanger Efficiency

A plane that is to the base of the figure will create a cross section that is the same shape as the base.

4.5 Images Formed by the Refraction of Light

12 m. 30 m. The Volume of a sphere is 36 cubic units. Find the length of the radius.

C) Find the area of each circle. Provide the exact answer and the area rounded to the nearest tenth. exact rounded exact rounded exact rounded

13. Surface Areas and Volumes. Q 2 The diameter of a garden roller is 1.4 m and it is 2 m long. How much area will it cover in 5 revolutions?

2 1.1 Safety using methods Definition of warning symbols Standard accessories Installation...

MODULE 4: Measuring Around Us

Reflection, Refraction and Polarization of Light Physics 246

Triangulation and Convex Hull. 8th November 2018

Contact Lens Wearer's Guide PERSONAL CLEANLINESS FOR LENS HANDLING AND INSERTION

CypLite Fiber Laser Cutting Head User Manual

Optics. a- Before the beginning of the nineteenth century, light was considered to be a stream of particles.

Modeling Evaporating Liquid Spray

Conceptual Physics Fundamentals

BoA Tools Page 1 / 31

Chapter 1 Names and Functions This chapter explains the names and functions of the parts.

Introduction. Bill Cooper LDC Meeting May 25,

Time: 3 hour Total Marks: 90

Conceptual Physics 11 th Edition

Versatile EEG 32 E32.A1. User guide

TEMPERATURE CONTROL AND MOUNT SELECTION

Be careful not to leave your fingerprints on the optical surfaces of lenses or Polaroid sheets.

Polar Coordinates. OpenStax. 1 Dening Polar Coordinates

Enhanced Performance of a Slider Mechanism Through Improved Design Using ADAMS

星の研究. A Study of Stars. Junten Science Library 4. Revised English version based on the lecture on 2 nd Dec for

2 Sets. 2.1 Notation. last edited January 26, 2016

Flowform Design for Biodynamic Preparations

Visualising Solid Shapes

Downloaded from

Refraction. P04 Refraction (complete).notebook. November 06, What is a medium? Ex.

Modeling Evaporating Liquid Spray

To find the surface area of a pyramid and a cone

The list below shows items not included with a SmartVDI-110 Server. Monitors Ethernet cables (copper) Fiber optic cables Keyboard and mouse

Chapter 34. Images. Copyright 2014 John Wiley & Sons, Inc. All rights reserved.

Reflection, Refraction and Polarization of Light

XEROX PHASER 5500 TONER & DRUM CARTRIDGE REMANUFACTURING INSTRUCTIONS

SOLIDWORKS: Lesson III Patterns & Mirrors. UCF Engineering

3D Design with 123D Design

Lab in a Box 4 OPTICS

Characterization of the Northwest Coast Native Art Ovoid

How does light energy travel? transparent transmit mediums media medium

1-8 Exploring Transformations

OptiNest II General Shapes Optimized Nesting User Manual V 2.10 OptiNest LT / Std / Usi

Clipping Polygons. A routine for clipping polygons has a variety of graphics applications.

4 7 CPCTC Congruent Triangles Applications

Lesson Plan Outline for Rainbow Science

ipod Touch 4th Generation Front-Facing Camera Replacement

Objectives. Vocabulary. 1-1 Exploring Transformations

Pre-Algebra, Unit 10: Measurement, Area, and Volume Notes

Chapter 26 Geometrical Optics

Middle East Technical University Mechanical Engineering Department ME 413 Introduction to Finite Element Analysis Spring 2015 (Dr.

Packard Bell. EasyNote BU Series. Disassembly Guide

CHAPTER 12. Extending Surface Area and Volume

Applications of Integration. Copyright Cengage Learning. All rights reserved.

Arithmetic Sequence

SOLIDS.

10-2. Warm Up Lesson Presentation Lesson Quiz. Holt McDougal Geometry

(From the Department of Physiology, University of Edinburgh, Edinburgh, Scotland.)

KM-4800w. Installation Guide

Area of Circle, Sector and Segment

9/20/2017 High School Geometry Common Core G.SRT.A.1 - Dilation Properties - Teacher Notes - Patterson

An Archimedean Walk. Modeling in Sketchpad

Conceptual Practice Problems for PHYS 1112 In-Class Exam #1A+1B

Pre-Algebra Notes Unit 10: Geometric Figures & Their Properties; Volume

JUST THE MATHS SLIDES NUMBER 5.2. GEOMETRY 2 (The straight line) A.J.Hobson

Fall 2012 Points: 35 pts. Consider the following snip it from Section 3.4 of our textbook. Data Description

4. A bulb has a luminous flux of 2400 lm. What is the luminous intensity of the bulb?

LCD Watch. Figure 1. Views of the inner case of the watch: front (left) and back (right).

The Geometry of Solids

USING THE DEFINITE INTEGRAL

Symbols Glossary Rev. 1 1 / 16

Wrong transistor on control amplifier PCB sometimes triggers a failure in the i-interrupt

Module 3 Mesh Generation

Ray Optics. Ray model Reflection Refraction, total internal reflection Color dispersion Lenses Image formation Magnification Spherical mirrors

Section 7.2 Volume: The Disk Method

Egyptian Space Science and Technology Educational Project Based on Can-Sat Program (CLTP)

How Does Light Move?

Computer Graphics Prof. Sukhendu Das Dept. of Computer Science and Engineering Indian Institute of Technology, Madras Lecture - 24 Solid Modelling

Gregory Walsh, Ph.D. San Ramon, CA January 25, 2011

Geometry Kaleidoscope. the sum of the distances from each point to AB and to CD equals to the sum of the distances from the same point to BC and AD.

SESSION FIVE CIRCUMFERENCE AND AREA OF A CIRCLE

A Simple Cigarette Butts Detection System

Reflection and Image Formation by Mirrors

Light and Mirrors MIRRORS

Math 6 Unit 9 Notes: Measurement and Geometry, Area/Volume

APPLE THE BEATLES [2-LP] Also available without the sticker on shrink as part of THE ORIGINAL STUDIO RECORDINGS 16 LP box set

HTC RE Companion Handheld camera

Module 4B: Creating Sheet Metal Parts Enclosing The 3D Space of Right and Oblique Pyramids With The Work Surface of Derived Parts

Student Lab Manual. Networks and Communications (COMP277L) SYSTEM PROPERTIES. Dr. Mohamed Ben Laroussi Aissa Room 11 A- 2.

3.5 ASPEN DYNAMICS SIMULATION OF CSTRs

Kotyle Documentation. Release 0.1a. Stefano Costa

Light, Photons, and MRI

ipad Mini 2 Wi-Fi Front Panel Assembly Replacement

Transcription:

DISC OF SABU STEAM MACHINE (ANCIENT EGYPTIAN TECHNIQUES) Gizo Vashakidze, doctor of geography The disc of Sabu, the historical artifact, was discovered by the English Egyptologist Walter Brian Emery in 1936. Fig.1 The tomb where the disc was discovered belonged to Sabu, the son of Pharaoh Anedjib. According to the Egyptian custom, the tomb was full of household things: pottery and stone implements, copper pots for hygienic procedures, ox bones, arrows, ivory box and so on. The disc is dated back to c. 3100 3000 B.C. The disc now is kept in the Cairo Museum (Egypt). There are various ideas about the purpose of the disc of Sabu: 1 - it is a vase of lotus shape; 2 - it is a dish for ritual or religious purpose; 3 - it is a support for a torch. The appearance of the disc of Sabu has generated quire a different idea in me. According to its shape I have supposed that this thing was created by ancient Egyptians for the contact of air and water. To substantiate this idea I have made the dummy of this disc. I erected the vertical axis where the disc dummy was put and made the disc to move vertically with the help of ropes up and down. Then I poured hot water in the vessel below. Fig.2

Based on the laboratory experiment conducted by me, the disc revealed quite an interesting property it sprinkled steam from the hot water to the air in a very regular, quick and remote manner. Fig.3 a, b 10 times disc ascending from water was enough to fill the room with steam.

The disc design looks as follows: - in the center of the disc there is the hole through which we have reeved the axis. - the disc is slightly convex due to which the disc does not sink into the water completely but only by half. Fig. 4 As we see on the figure the ropes are loosened, so nothing holds the disc but the water. This feature of the disk is rather important. The fact is that if the disc sinks, it will be hard to take it up as its weight will be added with the weight of water. The disc s lower part immerges in the water. This is an obligatory condition as by this part the water is lifted up to air, sprinkles and vaporizes. Naturally we can ask, why the disc does not submerge in water in full?! This takes place due to the convex center of the disc and because the disc vertically immerges down while the air accumulates between its center and water. Just this air prevents the disc from submerging. In my opinion this property of the disc is not occasional but the engineer who designed this disc made this quite intentionally. - Look at the disc perimeter which has the shape folded towards the center lengthwise. (Fig. 1)This folded part of the perimeter immerses in the water and this folded part generates elevation of water drops in the air. The perimeter is not of only round shape but has three inner lobes which increase the length of the disc perimeter and, hence, the length of the contact of water and the disc thus increasing the quantity of water drops lifted in the air. Fig. 5

- Let s consider the last detail, three of a kind lobes. This detail of the disc is sinking into the water. When the disc is uplifted the disk top shall cut the encountering air. Fig. 6 When contacting the top of the disc, the air moves to the disk edge where due to the shape ideally rounded for the air, the air is absorbed on the outer lobe plane in the center of the disc. On the other hand, on the inner side of a lobe, where a few seconds before the water droplets was flowing and, consequently, air and water drops contacted on the love edges, water sprinkles and vaporizes. Let s focus on the layout of lobes. Fig. 7

Their centers are 120 degrees away from each other, hence, air, water and steam particles are driven from one lobe the towards the opposite free space. Given the above, the structure resembles a steam machine using which we can generate steam from hot water quickly, conveniently and remotely. According to historians, the ancient Egyptians paid great attention to the hygiene of the body, as well as they use water for treatment of various diseases. They made warm vapor inhalations and facial masks. It cannot be ruled out that the then men could use the hot steam for such purposes, which are not known by us. Among the items found in the Sabu tomb there are presented the items of personal care which are referred to as the COPPER TOILET IMPLEMENTS, see Figure 8. It is possible that the Sabu disc was used for the personal hygiene. Fig. 8 erences Ref Ан. А. Громыко. Африка. - Москва, Советская энциклопедия, 1986 Archaic Egypt (bio), Walter B. Emery, Pelican Books, London, 1963. The Tomb of Sabu and The Tri-lobed "Schist" Bowl ; Archae Solenhofen, 2003.

http://www.bibliotecapleyades.net/egipto/esp_egipto_mist_2c.htm Геродот. История в девяти книгах. Изд-во «Наука», Ленинград, 1972.