368 ACCESSOR I E S & OPT I C A L CONTROLS
MonoRail Satin Nickel / End Caps / Remote 300 Watt 12 Volt Transformers / 4" Round Single-Feed Canopies / Power Extenders / Power Vault Adapters / Adjustable Standoffs / 6" Aero Heads / Round Glass Shield Accessories Frost / MR16 Lamps TRENDS PUBLISHING INTERNATIONAL DESIGNER: STAINBACK-HESS STUDIO PHOTOGRAPHER: JOHN UMBERGER ACCESSORIES & OPTICAL CONTROLS 369
ROUND GLASS SHIELD ROUND GLASS SHIELD Colorful translucent round glass. Integrated Louver Lens Holder in aluminum or antique bronze. Can hold up to two lenses or louvers. MR16 of up to watts. Available for use on Aero, CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Helios, Joshua Ceiling, LC-Archie, LC-Georgi, LC-Wally Lite, K-Bye-Bye, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, MO-Pivot, Swivel, Tele, Tilt, Torpedo Pendant, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite 700MR16G A AMBER ALUMINUM B COBALT Z ANTIQUE BRONZE F FROST G GREEN 2.3" 58 mm 1.9" 49 mm CONE GLASS SHIELD CONE GLASS SHIELD Colored frosted cone glass. Includes optional cone louver lens holder. Can hold up to two lenses or louvers. MR16 of up to watts. Available for use on Aero, CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Helios*, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, MO-Pivot, Swivel, Tele, Tilt, Torpedo Pendant, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite 700LICO AM AMBER CO COBALT FR FROST GR GREEN RO ROSE 2.8" 71 mm 1.6" 41 mm CONE ONYX SHIELD Natural onyx cone. Includes optional Snap Louver Lens Holder. Can hold one lens or louver. Low-voltage MR16 lamp of up to watts. Available for use on Aero, Helios*, Tilt, Torpedo Pendant TILT WITH CONE ONYX SHIELD 700LICOHX 3.4" 86 mm 2.8" 71 mm Bi-pin MR16 Shows lamp type and maximum wattage. Includes a Louver Lens Holder Includes a Snap Louver Lens Holder * Lenses and louvers cannot be used with the Helios head other than when the lens holder is integrated into the accessory. 370
FIREBIRD GLASS SHIELD Patterned Murano glass. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to watts. Available for use on Aero, Helios*, Tilt, Torpedo Pendant 700FIRA O OWL (AMBER) Z ANTIQUE BRONZE P PEACOCK (BLUE) C CHROME S SWAN (WHITE) S SATIN NICKEL 1.7" 43 mm 2.7" 69 mm FIREBIRD GLASS SHIELD SCAVO GLASS SHADE Curve shaped scavo glass finish provides old world charm. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to watts. Available for use on Aero, Helios*, Tilt, Torpedo Pendant 700SCAVO A AMBER Z ANTIQUE BRONZE M AMETHYST C CHROME F FROST S SATIN NICKEL G GREEN 3" 76 mm 1.9" 48 mm SCAVO GLASS SHADE MARTINI GLASS SHIELD Layers of brilliant glass. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to watts. Available for use on Aero, Helios*, Tilt, Torpedo Pendant 700MRT Bi-pin A AMBER FRIT Z ANTIQUE BRONZE M MULTI FRIT C CHROME P PURPLE FRIT S SATIN NICKEL W WHITE FRIT MR16 5.3" 135 mm Shows lamp type and maximum wattage. 3" 76 mm MARTINI GLASS SHIELD Includes a Louver Lens Holder Includes a Snap Louver Lens Holder ACCESSORIES & OPTICAL CONTROLS * Lenses and louvers cannot be used with the Helios head other than when the lens holder is integrated into the accessory. 371
SODA GLASS SHADE Cone shaped glass shade infused with bubbles. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to watts. Available for use on Aero, Tilt, Helios*, Torpedo Pendant SODA GLASS SHADE 700SDA A AMBER Z ANTIQUE BRONZE B BLUE C CHROME F FROST S SATIN NICKEL 3" 76 mm 2.5" 64 mm METEORITE Case glass or clear. Includes Snap Louver Lens Holder for MR16, can hold a single lens or louver. MR16 of up to watts or bi-pin of up to watts. Available for use on Aero, Helios*, Tilt and Torpedo pendant CURLY TORPEDO WITH METEORITE 700MET AM AMBER Z ANTIQUE BRONZE CR CLEAR C CHROME BL COBALT S SATIN NICKEL FR FROST RD RED 3" 76 mm 2" 51 mm SUGAR ACCESSORY Streams of glass piping formed into a coned shape. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to watts. Available for use on Aero, Helios*, Tilt, Torpedo Pendant CURLY TORPEDO WITH SUGAR ACCESSORY 700SUG A AMBER Z ANTIQUE BRONZE Q AQUA C CHROME R RED S SATIN NICKEL V VIOLET W WHITE 3.5" 89 mm 1.8" 46 mm Bi-pin MR16 Shows lamp type and maximum wattage. Includes a Louver Lens Holder Includes a Snap Louver Lens Holder * Lenses and louvers cannot be used with the Helios head other than when the lens holder is integrated into the accessory. 372
DICHROIC GLASS SHIELD Iridescent spectrum of colored glass. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to watts. Available for use on Aero, Tilt, Helios*, Torpedo Pendant 700DCH Z ANTIQUE BRONZE C CHROME S SATIN NICKEL 3.4" 86 mm 2.8" 71 mm TILT WITH DICHROIC GLASS SHIELD LIL EGYPT Finely handcrafted beaded shade. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to watts. Available for use on Aero, CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Helios*, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Swivel, Tele, Tilt, Torpedo Pendant, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite LIL EGYPT 700LEGY AM AMBER CB COBALT DA DARK AMBER FR FROST RD RED 2.3" 58 mm 2.8" 71 mm MINI OM ACCESSORY Metal, frost and translucent glass, or onyx backlight shield. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 lamp of up to watts (not included). Available for use on Mini Om 700MR16OM AC AMBER Z ANTIQUE BRONZE A AMBER FROST S SATIN NICKEL CC CLEAR F FROST S SOLID METAL O ONYX OM WITH MINI OM ACCESSORY ACCESSORIES & OPTICAL CONTROLS * Lenses and louvers cannot be used with the Helios head other than when the lens holder is integrated into the accessory. 373
TAZA ACCESSORY TAZA ACCESSORY Cone glass accessory with intensely twisted rich color. Includes optional cone louver lens holder. Can hold up to two lenses or louvers. Low-voltage MR16 lamp of up to watts (not included). Available for use on Aero, CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Helios*, Joshua Ceiling, K-Giro, K-Jane, K-Johnny,K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, MO-Pivot, Swivel, Tele, Tilt, Torpedo Pendant, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite 700TAZA A AMBER C CREAM N BROWN R RED 2.8" 71 mm 1.6" 41 mm PRISM GLASS SHIELD Ribbed glass. Includes Snap Louver Lens Holder. Can hold a single lens or louver. MR16 of up to watts. Available for use on Aero, Helios*, Tilt, Torpedo Pendant 700PRISM AS AMBER CS CLEAR 2.5" 64 mm TILT WITH PRISM GLASS SHIELD 3.3" 84 mm FLIGHT PAPER MR16 35 Decorative shade of white heat-resistant paper. MR16 of up to watts; of up to 35 watts. Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Sprocket, Swivel, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite SPROCKET WITH FLIGHT PAPER 700FP TYPE WH 11 16 MR16 MR16 4.3" 109 mm 9.3" 236 mm 7" 178 mm 3.3" 83 mm Bi-pin MR16 Shows lamp type and maximum wattage. Includes a Snap Louver Lens Holder * Lenses and louvers cannot be used with the Helios head other than when the lens holder is integrated into the accessory. 374
35 TINKERBELL Small Metal Shade. Includes Snap Louver Lens Holder. Can hold a single lens or louver. Antique bronze, antique bronze mesh and black MR16 of up to 35 watts. Chrome, satin nickel and chrome mesh MR16 of up to watts. Available for use on Aero, Helios*, Tilt, Torpedo Pendant (sold separately). 700TNKBELL BZ ANTIQUE BRONZE ZM ANTIQUE BRONZE MESH BK BLACK CH CHROME CM CHROME MESH SN SATIN NICKEL 2.5" 64 mm 1.8" 44 mm 35 TINKERBELL TINKERBELL WITH INTEGRATED LENS HOLDER Small Metal Shade with integral Louver Lens Holder. Can hold up to two lenses or louvers. Antique bronze, MR16 of up to 35 watts. Chrome and Satin Nickel MR16 of up to watts. Available for use on Aero, Helios*, Tilt, Torpedo Pendant 700TNKBELLV BZ ANTIQUE BRONZE CH CHROME SN SATIN NICKEL 1.8" 44 mm 2.5" 64 mm HELIOS WITH TINKERBELL WITH INTEGRATED LENS HOLDER BELLADONNA Large bell-shaped metal shade with plated finish. Includes Eggcrate Louver. MR16 of up to watts. Available for use on Aero, Helios, Tilt, Torpedo Pendant 700BELL BZ ANTIQUE BRONZE CH CHROME SN SATIN NICKEL 4.5" 114 mm 2.5" 64 mm CURLY TORPEDO WITH BELLADONNA 35 BELL Bell-shaped metal shade with plated or painted finish. Includes Eggcrate Louver. MR16 of up to 35 watts. Available for use on Aero, Helios, Tilt, Torpedo Pendant 700AERBELL BZ ANTIQUE BRONZE BK BLACK CH CHROME SN SATIN NICKEL 2.7" 67 mm 3.3" 84 mm BELL ACCESSORIES & OPTICAL CONTROLS * Lenses and louvers cannot be used with the Helios head other than when the lens holder is integrated into the accessory. 375
LIL WOK 20 K-JOHNNY WITH LIL WOK Decorative metal shade. Includes Snap Louver Lens Holder. Can hold a single lens or louver. Silver and black for MR16 of up to watts. Antique bronze for MR16 up to 20 watts only. Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Giro, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Swivel, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite 700LMPCO Z ANTIQUE BRONZE B BLACK S SILVER 1.6" 41 mm 3" 76 mm BACKLIGHT SHIELD 75 35 SWIVEL WITH BACKLIGHT SHIELD Decorative mesh or solid metal shade. Includes Louver Lens Holder. MR16 holds up to two lenses or louvers. (solid only) can hold up to two lenses or louvers. Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Sprocket, Swivel, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite 700MR TYPE 11S SOLID CH ALUMINUM 16S MR16 SOLID BZ ANTIQUE 16M MR16 MESH BRONZE BK BLACK MR16 2.3" 58 mm 1.3" 33 mm 1.5" 38 mm.8" 19 mm BARNDOORS Secures to front of MR16 lamp to control light. Includes Louver Lens Holder. Can hold up to two lenses or louvers. Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Sprocket, Swivel, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite SPROCKET WITH BARNDOORS 700A08-BK 7" 178 mm Bi-pin MR16 AR111 Shows lamp type and maximum wattage. Includes a Louver Lens Holder Includes a Snap Louver Lens Holder 376
LOUVER LENS HOLDER Secures to front of lamp to hold lenses or louvers. MR16 holds up to two lenses or louvers. can hold a single lens or louver. Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Sprocket, Swivel, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite 700A01 TYPE - MR16 BZ ANTIQUE BRONZE 1 BK BLACK AL ALUMINUM MR16.5" 13 mm 2.3" 58 mm.5" 13 mm 1.5" 38 mm SPROCKET WITH LOUVER LENS HOLDER AND ED LENS SNAP LOUVER LENS HOLDER Snaps on front of MR16 lamp to hold a single lens or louver. Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Giro, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Sprocket, Swivel, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite 700A06-CH 2" 51 mm SPROCKET WITH SNAP LOUVER LENS HOLDER MR16 SNOUT Prevents side glare from MR16 lamp. Requires Louver Lens Holder (sold separately). Available for use on CP1, DJ-Archie, DJ-Georgi, DJ-Telescope, DJ-Wally Lite, Joshua Ceiling, K-Bye-Bye, K-Giro, K-Hello, K-Jane, K-Johnny, K-Pivot, K-Telescope, LC-Archie, LC-Georgi, LC-Wally Lite, Metal Man, MO-Pivot, Parachute, Sprocket, Swivel, T156, Tele, Wall Archie, Wall Georgi, Wall Telescope, Wally Lite 700SNOUT A ALUMINUM B BLACK 1" 25 mm 2" 51 mm SWIVEL WITH MR16 SNOUT ACCESSORIES & OPTICAL CONTROLS 377
ED & DICHROIC LENSES Colored lenses wash the light with color; dichroic lenses filter for SPROCKET WITH LOUVER LENS HOLDER AND ED LENS a pure effect. MR16 140 TYPE DIMENSIONS A DIMENSIONS B FIL ED LENS RED RED 1.4" (35 mm).1" (3 mm) DIC DICHROIC LENS BLU BLUE 2.0" (51 mm).1" (3 mm) YEL YELLOW 4.0" (101 mm).1" (3 mm) GRN GREEN A B 140 TYPE DIMENSIONS A DIMENSIONS B UV FILTERS FIL11 ED LENS RED RED 1.4" (35 mm).1" (3 mm) BLU BLUE 2.0" (51 mm).1" (3 mm) YEL YELLOW 4.0" (101 mm).1" (3 mm) GRN GREEN Efficiently blocks UV radiation while transmitting high quality visible light. SPROCKET WITH SNAP LOUVER LENS HOLDER AND UV FILTER 140UV SIZE DIMENSIONS A DIMENSIONS B MRII 1.4" (35 mm).1" (3 mm) MRI6 MR16/PAR16 2.0" (51 mm).1" (3 mm) PAR36 AR111 4.0" (101 mm).1" (3 mm) A B AERO WOOD HANDLE ACCESSORY 700AERWOOD TYPE W WALNUT Z ANTIQUE BRONZE N STAINABLE C CHROME BARE S SATIN NICKEL WALNUT WOOD HANDLE SODA GLASS SHADE AND WOOD HANDLE ACCESSORY Bi-pin MR8 Shows lamp type and maximum wattage. Includes a Louver Lens Holder Includes a Snap Louver Lens Holder 378
EGGCRATE LOUVER Hexcell louver cuts glare from lamp. 700 TYPE DIMENSIONS A DIMENSIONS B A03-BK 1.4" (35 mm).1" (3 mm) A02-BK MR16/PAR16 2.0" (51 mm).1" (3 mm) A03-36 AR111 4.0" (101 mm).1" (3 mm) A B SPOT WITH EGGCRATE LOUVER DIFFUSER, SPREAD & SOFT FOCUS LENSES Diffuser lenses diffuse the beam; linear spread lenses elongates the beam; soft focus lenses reduce lamp glare and blur the sharp lines of lamp images. 140 SIZE TYPE DIMENSIONS A DIMENSIONS B SPROCKET WITH SNAP LOUVER LENS HOLDER AND DIFFUSER LL LINEAR 1.4" (35 mm).1" (3 mm) MR16 MR16/PAR16 SPREAD 2.0" (51 mm).1" (3 mm) DF DIFFUSER SF SOFT FOCUS A B SWAG HOOK Use to change a low-voltage pendant s point of suspension to any point on the ceiling. Order one for each pendant. 700FJSWG Z ANTIQUE BRONZE C CHROME S SATIN NICKEL 1.5" 38.1 mm 0.8" 20.1 mm Use to change a line-voltage pendant s point of suspension to any point on the ceiling. Order one for each pendant. 700TDSWG B BLACK Z ANTIQUE BRONZE S SATIN NICKEL W WHITE 1.5" 38 mm.8" 20 mm ACCESSORIES & OPTICAL CONTROLS 379
GOBO HOLDER Two threaded rods plus gobo holder and one magnifying lens. Attaches to T156 fixture (p. 120). The result is a projected pattern or logo onto any surface. Includes MR16 Snout. 700AC156 C CHROME S SATIN NICKEL GOBO MAGNIFYING LENS Add this optional magnifying lens to the gobo holder to increase the size of the projected image. 700MAGGL C CHROME S SATIN NICKEL CUSTOMIZABLE GOBO TEMPLATE Gobos are available in standard and custom patterns; metal and glass. For additional information on standard and custom gobos, please call 847.410.4400. 380
MonoRail Satin Nickel / End Caps / Remote 300 Watt 12 Volt Transformers / 4" Round Single-Feed Canopies / 2" Rigid Standoffs / 18" Aero Heads / Round Glass Shield Accessories Amber / MR16 Lamps / FreeJack Port Alone / 3" Sprocket Heads / MR16 Lamps LOCATION: L.A.R.D. INVESTMENTS, L.P., SANTA FE SPRINGS, CA DESIGN: H. HENDY ASSOCIATES PHOTOGRAPHER: PAUL BIELENBERG ACCESSORIES & OPTICAL CONTROLS 381