Call to Order! 1

Similar documents
TILBURY STEEL SERVICE CENTRE

Common grade: ASTM A36..min. 36,000 yield / min. 58,000 tensile. Size Weight (lbs.) Weight (lbs.)

Kully Reference Book

Index. E Expanded Metal Raised Flattened Grating... 93

CONTRACTORS STEEL COMPANY STOCK BOOK AND REFERENCE GUIDE INDEX

North US 290 US 183. MLK Blvd. FM 969. ASERO Steel Sales. Ben White TX 71 IH-35 US 183

Hot Rolled Steel Products. Contents

Index. Aluminum. Channel. Coil. Floor Plates. Angles. Flats. Beams. Expanded Metal. Hexagons. Angle Bar Beams Galvanized...

metric conversion factors

Livingston & Co., Inc Gallia St. Portsmouth, Ohio (740) (740) Open Monday - Friday 8:00-12:00 12:45-4:00

Measurement and Geometry

Math Tool: Grid Paper

Metfab - 7 Ricdanic Drive, BAYSWATER,Vic,3153 Ph:

5th Grade. Standard Measurement Conversions. Slide 1 / 115 Slide 2 / 115. Slide 4 / 115. Slide 3 / 115. Slide 5 / 115.

5th Grade Measurement & Data

5th Grade. Slide 1 / 115. Slide 2 / 115. Slide 3 / 115. Measurement & Data. Table of Contents

5th Grade. Standard Measurement Conversions. Slide 1 / 115 Slide 2 / 115. Slide 4 / 115. Slide 3 / 115. Slide 5 / 115.

5th Grade. Measurement & Data.

(618) FAX (618)

VAREC 5000/5010 SERIES FLAME ARRESTERS

Fraction Kit Manipulatives

Name: Date: Period: Chapter 9: 3-D Figures Topic 3: Volume Day 2

Throughout this section there are various icons to help you with your product selection. Diameter STEEL

Plate. Channels - Standard Structural* Conforms to ASTM A36 Lengths Available: 20 Ft. and 40 Ft. Stock items are highlighted in blue.

MTH052: Introduction To Algebra And Geometry

{[2 x (3+5)] 9}= {[2 x 8] 9}= {16 9}=

9 Find the area of the figure. Round to the. 11 Find the area of the figure. Round to the

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.

BLACK & GALVANIZED SCH 40 STEEL NIPPLES

GRADE 5. Mathematics. Administered April 2018 RELEASED

ROUND BEND U-BOLTS. Standard Pack: 10 Pieces. Some sizes also available in Stainless Steel. See page 50.

Acute Angle. Angle. An angle that measures greater than 0 and less than 90. A figure formed by two line segments or rays that share the same endpoint.

The Next Step. Mathematics Applications for Adults. Book Measurement

Declaration of Quantity: Consumer Packages. Amended.

North Adams Public Schools

Sample Questions from Ga. Department of Education

Write Euler s Theorem. Solving Problems Using Surface Area and Volume. Figure Surface Area Volume. Cl V 5 1 } 3

FIFTH GRADE Mathematics Curriculum Map Unit 5

ACCELERATED MATHEMATICS CHAPTER 11 DIMENSIONAL GEOMETRY TOPICS COVERED:

2-dimensional figure. 3-dimensional figure. about. acute angle. addend. addition. angle. area. array. bar graph. capacity

Brunswick School Department: Grade 5

4 th Grade Summer Mathematics Review #1. Name: 1. How many sides does each polygon have? 2. What is the rule for this function machine?

CCM6+ Unit 12 Surface Area and Volume page 1 CCM6+ UNIT 12 Surface Area and Volume Name Teacher Kim Li

STRENX TUBE 100XF STRENX TUBE 100XF. General Product Description

Channel,Half Slot,10ft

Unit 7: Area and Volume

Members: Sponsor: Dalton Hamilton Preston-Eastin Levi Edens Kenneth Mui Brice Abbott

English 5 th Grade M-Z Vocabulary Cards and Word Walls Revised: 4/13/18

GRADE 5. Mathematics. Administered March 2017 RELEASED

12-7 Volume of Pyramids, Cones, and Spheres

Geometry: Notes

Grade 6: Geometry and Algebra. 1. Choose an appropriate customary unit for measuring the area of a classroom. B. Square Feet D.

ROLLING COUNTER SHUTTERS

6061-T6 Am. Std. I Beams/Al. Assn. I Beam

5TH GRADE COMMON CORE VOCABULARY M-Z

1.1 Metric Systems. Learning Target: to practice converting between different metric units. Main Ideas:

VAREC 5000/5010. Flame Arresters

Additional Practice. Name Date Class. 1. Find the area and the perimeter of each of the four shapes below. a. b. c. d. Covering and Surrounding

Chapter 7 Connect Algebra to Geometry

Review: Geometry. Area Composite Figures Surface Area Volume Fractional Edge Length 3-D Figures and Nets Coordinate Graphing

Volume and Surface Area Unit 28 Remember Volume of a solid figure is calculated in cubic units and measures three dimensions.

How to convert cubic inches to square feet

Lesson 14.1 Skills Practice

Recall: The volume formula for a general cylinder is: (Area of the base) x (height) Find the volume to the nearest tenth

Trigonometry Tables and Handy References for Engineers

Instructions For etakeoff Structural Steel Takeoff Tools Version 1.3.0

Solutions to: Unit Conversions and Significant Figures Problem Set S.E. Van Bramer (9/10/96)

Chapter Review. Find the circumference of each circle. Round to the nearest tenth. 1. SOLUTION: The circumference is about kilometers.

CHAPTER 12. Extending Surface Area and Volume

3 rd Grade Mathematics Learning Targets By Unit PA CORE STANDARD ADDRESSED

LOOK INSIDE FOR BEN STEIN S ARTICLE WE VE FIGURED HIM OUT RECTANGLE TUBE

ALLIANT METALS INC. PRODUCT & SERVICE CATALOG B Route 111 Hampstead NH RECEIVING HOURS: 8 a.m. to 4 p.m.

Applications. 24 Filling and Wrapping. In Exercises 1 3, rectangular prisms are made using 1-inch cubes.

NAME DATE PERIOD. If the fish tank shown is 80% filled with water, how much water is in the tank? 6.G.2, MP 1

Sheet Metal Overview. Chapter. Chapter Objectives

Kansas City Area Teachers of Mathematics 2010 KCATM Math Competition

Strongman Metal Tools Price list July 2018

GRADE 5. Operations & Algebraic Thinking - Domain

DRI. VARIZON Displacement unit with adjustable spread pattern

Table of contents. What is new in Advance Steel 2014 WELCOME TO ADVANCE STEEL USER INTERFACE ENHANCEMENTS... 6 MODELING JOINTS...

Product Catalog Tapered & Spherical Roller Bearings Self Aligning Ball Bearings The most affordable quality in the world >>

Surface Area and Volume

4th Grade Math Curriculum Map BENCHMARKS TERMINOLOGY. Lesson assessments pre and post test. Check My Progress. Benchmark Test

Basic Skills Review Packet

MATH 1112 Trigonometry Final Exam Review

Chapter Test A For use after Chapter 12

EXPANDED METAL MESH. Compendium for purchaser

The School District of Palm Beach County 5 th Grade Mathematics Scope st Trimester. 13 days: August 20 September 8

1201 Common Mathematics Assessment - June 2013 Answer Sheet. Name

Geometry Solids Identify Three-Dimensional Figures Notes

Steel connections design According to EC3. User s Manual

Additional Practice. Name Date Class

standard stock range Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability

MATH-G P- Geometry Formulas Exam not valid for Paper Pencil Test Sessions

Large & Small Numbers

Dimensions in mm in mm in. R in mm in mm mm. Weight. Dimensions in.

CCBC Math 081 Geometry Section 2.2

Surface Area of Solids

12.4 Volume of Prisms, Cylinders, Pyramids, and Cones. Geometry Mr. Peebles Spring 2013

12-4 Volumes of Prisms and Cylinders. Find the volume of each prism.

Transcription:

Carbon Steel Stainless Steel ANGLES BEAMS CHANNELS Bar Angles...... Structural Angles.............., Junior Beams... Standard....... Wide Flange 7,,9, Standard...... MC Shapes- (Car, Ship and Junior)......, Bar Channel.... CONCRETE REINFORCING BARS.............. EXPANDED METAL Standard....... Flattened...... Grating....... PIPE PLATES.... 7,,9,0,............ 0, ROUND BARS............... SHEETS FLAT BARS Hot Rolled, Cold Rolled, & Galvanized........................., SQUARE BARS STRIP TUBING............................. Rectangular......., Square Tubing........ Round Tubing........ 7 ANGLES CHANNELS PIPE.......... Standard..... 7........... 7 ROUND BARS............. SHEETS & Plates............ SQUARE BARS............ FLAT BARS..........,7, FLOOR PLATES.............. 0 BAR GRATING............... UNIVERSAL MILL PLATES............ 9 METAL BUILDING COMPONENTS............. TUBING Square & Rectangular.................7 Cutting Capabilities............... 9 Call 0--9 to Order!

W.T. Howell & Sons, Inc. company is a family owned and operated corporation located in the Heart of Georgia. We are a metal service center with a complete line of carbon and stainless metal products. W.T. Howell & Sons, Inc. s legacy began long before the company commenced business as a metal service center. It all started with a one man s vision to meet the public s welding needs. Mr. Tommie Howell, founder, began working for a local Western Auto Store in Eastman, Georgia in his early teens. Later, he became the main service maintenance man. After years of working there, Mr. Howell purchased the Welding Shop from the local Western Auto, thus beginning the long family tradition of having an entrepreneurship dealing with steel. Mr. Tommie Howell left the business to three of his sons, of whom one has chosen to remain in the business. Mr. William Howell, Jr. now carries on that tradition with his wife, son, and daughter. This third-generation corporation has kept the goals and visions that were put into play many years ago: to supply quality steel products in a timely manner with friendly service. Over the past years the company has grown into a full line metal service center serving the southeastern area of the United States. We here at W.T. Howell & Sons, Inc. make it our pursuit to be a dependable partner and to provide service like no other. We not only make it our goal to have fast service, but to do it with a friendly attitude. We hope that this book will provide a brief overview of our company and some of the products that we offer. Please give us the opportunity to do business with you. Tommie Howell, Founder Call 0--9 to Order!

Bar Angles (Inches) 0ft 0ft. x x /. 7.. / x / x /. 9. 9. -/ x -/ x / x x...77 (Inches) 0ft 0ft.... 7.. 0. / x / x / x.9..... x - x x.9. 9..0 7..0 7/ x 7/ x / x / x / x / x / x x / x x -/ x -/ x / - x - x / x x - x 7/ x / x - x - x - / x - x / x x x -/ x - x / x x.70..70...9.900.0..9.9..........0..0.0. 9..0 0. 9.......0. 7.0..0..0..0.0. 9..0 0. 9. 7.... 9. 7.0 9..0 9. 7.0 9. x - x / x x x x / x x x x - x - x x - x - x x x - x x x x x - x - x x x x x...77...9.9.70..9..9.9.7..0.0.07..00.90 7.70....0.. 7. 9.0. 9... 7..0 7. 90.0.0..0 0.0.0.0 7.. 0..0 97. 7...0 9. 9. 97. 7.. 0.0..0.0..0 00.0.0 0.0 Call 0--9 to Order!

Structural Angles (Inches) 0ft 0ft (Inches) 0ft 0ft. x x x x x x x - x x x x x...0.9 7.7.9.....0.0 0.0.0.0 7. 90.0.0.0 70.0.0.0 00.0.0 0.0..0.0.0 0.0 x x x x x x / x / x x x x x.. 9...7... 9...0.0 9.0.0.0 70.0.0.0 9.0.0.0.0 9.0.0.0 70.0.0.0 9.0.0 x x x x x x - x - x x x x - x x x x x - x - x x x x x x x x x x / x - x x x x x /.7.9. 7. 9..9. 7. 9... 7.9.. 7.... 7..... 7.7 9..9.7 7. 9.0.0.0.0 9.0.0.0.0.0.0.0 0.0.0.0 70.0.0.0.0 70.0.0 7.0.0.0.0.0 9.0. 9.0.0.0 7.0 9.0.0.0 7.0.0.0.0 0.0.0.0 0.0.0.0.0 0.0.0.0.0 0.0.0 7.0.0 x - x x x x x / x / x x x x x / x / x - x x x x x x x 7/ x x / x / x 7/ x x x x 7/ x x / x / x 7/ 7.0.7... 9.... 0.0. 9..7..... 0.0. 7...9 7. 9...7. 0.0 7.0 0.0 7.0.0 9.0 0.0.0.0 00.0 7.0 9.0.0 0.0 0.0.0.0.0 00.0 7.0.0.0 9.0.0 9.0.0 7.0.0.0.0.0.0 7.0 79.0.0 9.0.0 0.0 9.0 9.0.0.0.0 9.0 7.0.0 0.0 9.0.0 9.0 9.0.0 7.0 9.0.0.0 Call 0--9 to Order!

Structural Angles (Inches) 0ft 0ft. (Inches) 0ft 0ft. x 7 x x x 7/ x x 9/ x / x / 7... 7.9 0.0.. 7.0 7.0.0.0 00.0.0.0 9.0.0.0 7.0 0.0.0.0 x x x 9/ x / x / x 7/ x x -/. 9..7.9.0.0.9.0 9.0.0 77.0 900.0 0.0.0.0.0.0.0 0.0 00.0 7.0 x x 7/ x x / x / x 7/ x 7. 9...7. 7..0 9.0.0 7.0.0 7.0.0 7.0 9.0.0.0 9.0 9 x x x 9/ x / x / x 7/ x..... 0..0 7.0.0.0 7.0.0.0 9.0.0.0.0.0 x x 7/ x x 9/ x / x / x 7/ x 0..0.7.. 9.. 0.0 0.0.0 70.0 7.0 7.0.0.0 90.0.0 0.0.0.0 7.0 M Beams or Junior Beams (I) AISI DESIGNATION A DEPTH IN B FLANGE WIDTH C FLANGE THICK- NESS D WEB THICKNESS PER FOOT 0-FT. 0-FT. MX.9 MX. MX. MX9 MX..00...9.0 0. 0.7 0.9 0.0 0. 0. 0. 0. 0.7 0.77.9.. 9. 7 7 7 0 0 7 Call 0--9 to Order!

Standard Beams (I) AISI DESIGNATION A DEPTH IN B FLANGE WIDTH C WEB THICK- NESS PER FOOT 0-FT. LENGTH 0-FT. LENGTH 0-FT. LENGTH S x.7 S x 7..0.09.70.9.7 7. 00 0 S x 7.7 S x 9...79.9. 7.7 9. 90 0 70 S x S x.7.00....0.7 00 9 00 90 00 S x. S x 7...... 7. 0 00 90 70 S7 x. S7 x 0 7 7....0. 0.0 0 00 0 9 00 S x. S x.00.7.7...0 0 7 90 0 S x. S x..9..9..0 0 700 00 0 S x. S x S x 0. S x 0.000.07..77.0..7.7..0 0. 0.0 700 00 7 00 000 90 0 000 S x.9 S x 0.0.0..0.9 0.0 00 7 000 7 000 S x.7 S x 70.00...7.7 70.0 9 00 0 00 S0 x S0 x 7 S0 x 0 0 0..9 7.0.0...0 7.0.0 0 0 700 0 000 00 90 00 0 S x S x 90 S x 0 S x S x 0 7.000 7. 7. 7.70.0..7.0.79.0 90.0 0.0.0 0.0 00 0 000 0 00 00 00 000 0 0 0 00 000 0 700 Call 0--9 to Order!

Wide Flange Beams SIZE & WT PER FOOT A DEPTH IN B FLANGE WIDTH C FLANGE THICKNESS D WEB THICKESS W x W x W x 9 W x 9 W x W x W x W x 0 W x W x W x W x W x W x W x W x W x W x W x 0 W x W x W x 7 W x W x W x 7 W x 9 W x W x W x 0 W x W x 9 W x W x 9 W x W x 0 W x W x 77 W x W x 0 W x W x W x W x 9 W x W x W x 0..0..90.0.99..0. 7.9 7.99... 7.9.0.00...0.7 9.00 9.7 9.99...7..7 9.7 9.9. 9.9.09..0.0....9.99.....00.000.00.90.000.990.00.00.0.90.000.0.70.9. 7.99.00.070.0.0..90.000.0.00.70.770. 7.90 7.9.00.000.00.0..90..0..970.990.00.00.90.0 0. 0.0 0.0 0. 0. 0.0 0.0 0. 0. 0.0 0. 0. 0.0 0.00 0.00 0. 0. 0.9 0.0 0. 0. 0.9 0. 0.70 0.0 0.9 0.0 0.0 0. 0. 0.0 0.0 0.0 0. 0. 0.770 0.70 0.990. 0. 0. 0.0 0. 0. 0.0 0. 0.0 0.70 0.70 0.0 0.0 0.0 0.0 0.0 0.70 0.0 0. 0.0 0 0. 0. 0. 0. 0.0 0.00 0. 0.70 0.90 0.0 0.0 0 0.0 0.0 0.00 0.90 0. 0.0 0.0 0.70 0.0 0.70 0.0 0.0 0. 0.7 0.00 0.0 0. 0.0 0.0 0.0 Call 0--9 to Order! 7

Wide Flange Beams SIZE & WT PER FOOT A DEPTH IN B FLANGE WIDTH C FLANGE THICKNESS D WEB THICKESS W x W x 0 W x W x 0 W x W x W x W x 7 W x 79 W x 7 W x 9 W x W x 0 W x W x W x 70 W x 90 W x W X W X 0 W X W X W X W X W X W X W X W X 7 W X W X 90 W X 99 W X 9 W X 0 W X W X W X 9 W X 7 W X W X W X 7 W X W X W X W X 70 W X 9 W X.0.9.0.9.0.9.....7.9...7.0..7.9..9...79.9.9.0.7..0.....7.9..7.0..7 7. 7. 7.9.9.7.0.00.0.0 9.99.0.000.00.0..0.0.0.00..70.70.000.0.70.7.770 7.99.00.00 9.99.0.070..0..0.70.7..0.0.90.99.0.0.0.7.90.9 0.0 0. 0.7 0.0 0.7 0.0 0.0 0.70 0.7 0. 0.900 0.990..00.0.7 0. 0.0 0. 0. 0. 0.0 0.9 0.0 0. 0.70 0.7 0. 0.7 0.7 0. 0.90.00.090.90..0.70.90.070.0.70.0..0 0.00 0.9 0. 0.70 0. 0.0 0.90 0.0 0.70 0. 0.0 0. 0.7 0.790 0.70 0.90.00 0.0 0. 0.70 0. 0. 0.0 0.0 0.70 0 0. 0.0 0. 0.0 0. 0. 0.90 0. 0. 0.7 0. 0.9.070.7.90..0..770.7 Call 0--9 to Order!

Wide Flange Beams SIZE & WT PER FOOT A DEPTH IN B FLANGE WIDTH C FLANGE THICKNESS D WEB THICKESS W X W X 00 W X W X W X W X 0 W X WX 0 W X 7 W X 7 W X 77 W X 9 W X 0 W X W X 0 W X W X 0 W X W X 0 W X W X 7 W X 7 W X W X 97 W X W X 9 W X W X 0 W X 7 W X W X W X 7 W X W X 9 W X W X W x W X W X 7 W X W X W X W X W X 7 W X W X 9 W X 9.0 9.0.9...0......7.97 7.70 7.90.0 7.99....7..9.9.7.97 0. 0..0 0.99.........0..7.7.7.9...0. 7.0..9.99 7.0 7.070 7..9...000.0.00 7.9 7.0 7. 7.90 7..0.090..00..0..0.70.9..0.90.0.90.0..0 7.00 7.00.9.990 9.00 9.0.70. 0. 0.0 0.0 0.0 0. 0.0 0.7 0. 0.70 0.7 0.9 0. 0. 0.0 0.70 0.0 0.9 0.70 0. 0. 0.770 0.70 0.90.00 0.0 0. 0.0 0. 0. 0.70 0. 0.90 0.0 0.7 0.90.0..0 0.0 0.90 0. 0. 0.770 0.7 0.70.0.90 0 0.7 0.9 0.0 0. 0. 0.0 0.9 0. 0. 0. 0.00 0. 0.0 0. 0.90 0. 0.0 0.9 0. 0. 0. 0.90 0. 0.0 0. 0.0 0.00 0.0 0. 0. 0. 0 0.0 0.00 0.0 0.70 0.70 0.9 0.0 0. 0.0 0.70 0. 0 Call 0--9 to Order! 9

Wide Flange Beams SIZE & WT PER FOOT A DEPTH IN B FLANGE WIDTH C FLANGE THICKNESS D WEB THICKESS W X 7 W X W X W X W X 7 W7 X W7 X 9 W7 X W7 X W7 X 9 W7 X W7 X W7 X 7 W7 X 9 W7 X 7 W0 X 99 W0 X W0 X W0 X W0 X W0 X W0 X 7 W0 X 9 W0 X W X W X W X W X W X 9 W X 0 W X W X W X W X 9 W X W X W X W X W X 0 W X 70 W X W X 9 W X W X 0 W X W X W X W X 0 W X W X 00 W X W X 9...7.00..7.9 7.09 7.9 7. 7. 7.9 7... 9. 9. 0.0 0.7 0. 0.7 0. 0. 0.9..09.0.9...9........0.7..9.9.90 7..0 7....7 7.09 7.0.0..900.9.90 9.90 9.990.0.070.0.9.00.0.0..0.7.9....9.00......7....90.9.0.90.97.000.00.07...70...0.9..0.70 0. 0.90.090.0.0 0.0 0.7 0. 0.90.0 0.97.0.90.0 0.70 0.70 0. 0.90.000..0.. 0.70 0. 0.90.0.0..7.00.70.70.90.090 0.790 0.90.00.0..0.0.0.70.0.70.0.70...0 0.0 0.0 0.0 0.70 0.70 0.0 0.90 0. 0.70 0. 0.0 0.0 0.7 0.70 0. 0.0 0. 0. 0. 0. 0.0 0. 0.7 0.77 0.0 0. 0.0 0. 0.70 0.7 0.77 0. 0.70 0.90.00.0 0.00 0. 0.0 0. 0.7 0.7 0. 0.70 0.70 0.0 0.90 0. 0. 0.9.00 Call 0--9 to Order!

Call 0--9 to Order! Channel Standard B FLANGE WIDTH C WEB THICKNESS...0.0... 7..7 9.0...0 9...7..7.7..0 0.0. 0.0.0 0.0 0.7.0 0.0.9 0.0 0.0..9.9.0..7.7.70..90.0.7.090.9.99.0..7....00.79..0.9.07.70.00.0.7..7.....7..90..00..7...9.0.0.7....0.79..7..7..00.0.7 70 0 0 90 0 9 9 0 7 7 00 00 0 00 00 00 00 00 7 0 00 Std. Std. 0ft 0ft. A DEPT OF CHANNEL IN 0 00 0 0 90 0 0 0 9 90 90 0 0 70 00 0 0 00 00 00 00 00 000 LBS. PER FOOT 7 7 7 9 9 9

MC-SHAPES (Car, Ship, and Junior Channels) A DEPT OF CHANNEL IN WIDTH LBS. PER FOOT B FLANGE WIDTH C WEB THICKNESS 0ft 0ft. x 7. 7..9 x.. 7 x.0 x. x. x. x.0.0....0.97.9.000.0...0.79 0 0 0 0 0 70 7 x 9. 7 x.7 9..7..0..0 7 90 x. x.7 x 0.0 x. x...7 0.0...7.97.0.0.0.79..00.7 70 7 00 0 7 0 9 9 x.9 9 x..9..0.00.0 7 0 9 x. x. x.0 x. x. x....0....7.90.0...70..7.79 0 70 7 0 0 x. x.0 x.0 x 0.0 x.0 x 0.0..0.0 0.0.0 0.0.70.77.90.0..90.70.7.90.7. 0 700 0 900 00 0 00 00 0 000 x. x.0 x 0.0 x 0.0..0 0.0 0.0.000.07...7.0.77 700 0 00 7 00 00 000 Call 0--9 to Order!

MC-SHAPES (Car, Ship, and Junior Channels) A DEPT OF CHANNEL IN WIDTH LBS. PER FOOT B FLANGE WIDTH C WEB THICKNESS 0ft 0ft. x.7.7.90.0 70 x...000 9 x.9.9.0.00 07 x.0.0.00.700 0 70 Bar Channels SIZE IN A X B X C 0ft 0ft. SIZE IN A X B X C 0ft 0ft. / x x / x x / x x / -/ x 9/ x - x x / - x x / - x 9/ x.....0...0.0..0 0.0.0. - x / x / -/ x x x x / x x / x x - x / x.7...9..7.0.00.0..0.0 Call 0--9 to Order!

Call 0--9 to Order! Round Bars 0.0 0.09 0.7 0. 0.7 0. 0. 0..0..0.7.0.7.70.79.7.7.09.00 7.0.7.0..0..0.9.0 0.9.07.0.0. 0..7.09 7. 0..7....0.... 7....90 0.. 0.0. 0..9.0 7. 7...00 0..0. 00.0.0.0 70.0 0.0..00 0..0.0.0.0 0.0.0 70. 7.00.00.0 90. 9.0.. (Inches) 0ft -/ -/ - - -/ - - -/ 7 7-7- 7-/ - -/ -/ 9 9-9- 9-/ - - -/ - - - - - - 7 7- - 9 0 7. 0..7 7.0.7.9 9....7. 0.. 0.9 70.90. 9.90 0.0.0.0.00.90 7.00.0 9.0 0.0..0.0 7.0.0.70.0.0 00..0.0 77.0 77.70 9.0.0 9.90 9.00.0. 0.0.0 7.00.0 7. 9.0 0.0.0.0 7.00 7.0 00.0 07..00.00.00 090.00.00 70.00.00 07.00 0.00.00.00 7.00.00 70.00 790.00.00 90.00 97.00.00 9.00 0.00.00 7.00.00.00 9.00 70.00 7.00 979.00 0.00 (Inches) 0ft / 7/ 9/ / / / 7/ -/ - - - - -/ -/ - -/ - - - -/ -/ -7/ -/ - - - -/ -/ -7/ -/ - - -

Square Bars (Inches) 0ft 7/ 9/ / / / 7/ -/ - - - -/ -/ -7/ 0. 0. 0.7 0. 0..0...9..0.0.0.. 7..9..9.. 9..0 7.00.0.0.0.0.00.00.00.00...00 79.0 0.0 9.00 - - -/ - - -/ -.0 7...7 0.0.9. 7..0..00. (Inches) 0ft 7.00.0.00.0.00 7.00.00 9.00.00 7.00 700.00.00 Concrete Reinforcing Bar (Inches) 0ft 0ft / / 7/ -/ - - -/ - # # # # # #7 # #9 # # # #.7.7..0.0.0.70.00.0. 7.0.00. 7.. 0. 0.0 0..0.00.0..00 7.00..0.7.7 0.0.7..00 7.. 0.00.00 Call 0--9 to Order!

Call 0--9 to Order! 0.0.00 7.0 0.00..0 9.7 7...0 9.0.9 7. 9.. 9.00.90. 7.0..0 9.7.00..0.7.00. 9.0.00.00 9.0.00 0.0 9.00.00. 7..0 7....7 9.0 7..00 9..0. 7.0.70 9.0 70.00.7.9 9...0...0....00 7..7 70. 7.0. 9..00. 7.0 Flat Bars.9....7..9.0.9.7...700.9...0.7.97.00...7.0.0.90..0...797.90.0.9.. / / 7/ -/ - - - -/ -/ - - -/ - - -/ - - - - 7 7- / / 7/ -/ - - In Inches.9.9..9..9..79.7.. 7.0 7.970..797.9..7..9.7.9.07..0.9.0....0.7 - -/ - - -/ - - - - 7 7- / / 7/ -/ - - - -/ -/ - - -/ - - - In Inches 7.0 7.0.90.0..0..9..0.97.7.79..0.90.9 7..9.0.7..700.9...0.7.97.00.7.0..90.0-7 7/ / 7/ - - -/ - - - - / / 7/ -/ - - - -/ -/ - -/ - - In Inches..0..7. 7.00 9....0 7. 9.7.00..0.7.00. 9.0.7.00 7. 7.0.00 9.0.00 0.0 9.00 7.0.00...9.0..90. 9. 0-Ft Bar 0-Ft Bar 0-Ft Bar

Call 0--9 to Order! 7 In Inches In Inches In Inches 0-Ft Bar Flat Bars 7.0 9.0.00.900.00.9.9..9..9..79.7...90 7. 9..0.90.70.70 7.000..0.9....0.7 7.0.00 70.00 7.00 0.00.00 7.00. 7..0 7....7 9.0 7..00 9..0.90 7.0.. 70.00 9.0.0..00 97.0 0.00..00 7..7 7.0. 9..00. 7.0 0.0 - - 7 / / 7/ -/ - - - -/ -/ - - -/ - - - - 7 / 7/ -/ - - -/ -/ - - -/ 0-Ft Bar 7.0..9.00.70.70.00.00 7. 0.00.97.79.09..0.90.9 7...9..900.90.70.0 7. 0..0.0.90.0 7.0 9.0.00.00.900.00.00.00. 7.0 0.00 9.0.00.0 0.00 7.00 0.00 9.0 7.. 9.. 9.00.90..0 7.0 0.0.00 7. 97.0 7.0 7.00.0 7.00.00.00 9.00.00.00 70.00 7.00 0.00.00.00 7.00 0.00 / - - - - 7 7/ - - - -/ - - -/ - - - 7 - - -/ - - -/ - - - 0-Ft Bar 7.000.700 0.00.0 7.00 7.0..00 9..90 7. 9..0.90.70..70 7.000 9.70 9.70.000.0..7.0.0 7. 0.0.9.0.0 0.00 7.00 0.00 7.00.00.00 9.0 0.00.0 9.00 7.0. 70.00 9.0.0..00 7.0 97.0 0.00.0.00 7.0.00 9.00.00 0.00 9.0.00.0 0.00 7.00 0.00 9.00.00.00-7 -/ - - -/ - - -/ - - - - 7 - - - -/ - - -

Flat Bars In Inches 0-Ft Bar In Inches -/ 0-Ft Bar In Inches - 0-Ft Bar 7 -/ - - - 0.0.70 0..90. 7. 0...7 9.7.00 7.00.00.00 97.0 7.00.0 7.00.0 9.00 - - - - 7.7.70 7.00 0.0. 7.0 0.0.00 0. 7.0.0.0 7.00 0.00 0.00 7.00.00.00.00.00 9.00.0 - - -.0 9.7.00..0.00.00 0..90.00.0.0.00 9.00.00 7.00.00 0.00 0.00.00 9.00 0.00.00.00 Hot Rolled Strips In Inches 0-Ft Bar In Inches 0-Ft Bar / x x x / x / x x - x - x -/ x x - x - x -/ x x - x x - x x x.9...9....7..9.0.9.7..700.9..0.00.....0..7. 7.00 9....0 9.7.00..0.00.00 x / x x / x / x x - x - x - / x x - x - x -/ x x - x x - x x x.9.9.9.7..797.9..7..9.7.9..0.9..0.7. 7.9 9..7.9 9...0...0...00 7..7 7.0.00 Call 0--9 to Order!

Universal Mill Plates Thickness & Width Inches 0ft Thickness & Width Inches 0ft x 9 x x x x 9 x x x 9 x x x x 9 x x x / x 9 x x x 7..0 9..0 9...7..7.0.0.0 7.00.70 0.0 9...0.0.0 70.0 7.0 0.0 9...0 9..0. 0.0 0.0 0.0 7.0 0.0..0.0.0 / x 9 x x 7/ x x x 9 x x - x 9 x x - x x x 9 x x.9.0 0.0 9.7.70 0.0.00 0...0.00.00.0.0.00.0 9.0.0.0 9.0 7.0.0.0.0 7.0.0 0.0 0.0.0.0 0.0.0 We now have capability of cutting all your parts with our plasma equipment. Our plasma is suitable for mild steel, stainless steel, and aluminum from gauge to thick. Our plasma along with our new press break and shear are a perfect blend for your next project! Call 0--9 to Order! 9

Call 0--9 to Order! Square Square Inch Plates 7/ 9/ / / / 7/ -/ - Square Square Inch.900..09.9..7.07..7090.7799..97.99.0... 7.7 7.7..7 9.9....7.9. Square Square Inch..0.7..9.70..9.70.....0. 7..77 0.9..0..7 0.9.7 7. 7. 0. 90.0 Square Square Inch gauge gauge gauge / /.00.00.0.07.00.07.099.7.9.00.00.7...7...7.7. - - - - 7 7- - 9 7...7. 7.7 0..97..0 0..7 0..9.0.0.0709.0....9.77.90.7...9. - - -/ -/ -7/ -/ - - -/ - - -/ Floor Plate Contact us now for your processing needs!

Plates x 9..7 0. 9.9 x 0 0.0 0.0.0.0 x 7. 90.0. 7. x 0.. 0.. 0 x 9 0.0 0.0.0.0 0 x 0.00.0.00 7.0 0 x 9.0.0 7.0 9.0 7 x 9 7. 90.0. 7. 7 x 0 9.0.0 7.0 9.0 7 x. 7. 9.7 0. 7 x 0 99.0.0.0 7.0 / / 7/ x 9 x 0 x x 0.. 9..0. 0..9 0.0 9..0 70. 0.0. 9.0 7.0.0..0 90. 7.0 0 x 9 0 x 0 0 x 0 x 0..00.0 0.00 0. 7.00.0.00.0.0 7. 0.00 9.0 7.0. 7.00.0 0.00 0.0 0.00 7 x 9 7 x 0 7 x 7 x 0 9..0 70. 0.0.9.0 7. 0.0 70. 7. 0. 7.0 7.0. 7. 7.0 90. 0.0 90. 900. Call 0--9 to Order!

Sheets Hot Rolled, Cold Rolled, Galvanized, & P&O In Inches 7 Gauge x 9 x 0 x x 0 0 x 9 0 x 0 0 x 0 x 0 7 x 9 7 x 0 7 x 7 x 0 Gauge x 9 x 0 x x 0 0 x 9 0 x 0 0 x 0 x 0 7 x 9 7 x 0 7 x 7 x 0 Gauge x 9 x 0 x x 0 0 x 9 0 x 0 0 x 0 x 0 7 x 9 7 x 0 7 x 7 x 0 Ga in Inches Lbs./Sq. Ft. Weight per Sheet.79 7. 0.00 00.00 0.00 00.00 00.00 7.00 0.00 70.00 0.00 0.00 0.00 900.00..7 0.00 7.00 0.00 0.00 7.00.7.0 7.0 0.00.0 9.00.00...00.00 70.00 0.00.00. 7.0.0 70.00 7.0 0.00 7.00 Galvanized Ga in Inches Lbs./Sq. Ft...7.99. 77... 9.0. 7. In Inches Gauge x 9 x 0 x 0 x 9 0 x 0 0 x 0 x 0 7 x 9 7 x 0 7 x 7 x 0 Gauge x 9 x 0 x 0 x 9 0 x 0 0 x 0 x 0 7 x 9 7 x 0 7 x 7 x 0 Gauge x 9 x 0 x 0 x 9 0 x 0 0 x 7 x 9 7 x 0 7 x Call 0--9 to Order! Ga in Inches Lbs./Sq. Ft. Weight per Sheet.9.0 0.00 00.00 0.00 00.00 0.00 00.00 00.00 0.00 00.00 0.00 00.00. 0.00 7.00.00 7.00.7.0 7.0.00.0.00.00.077. 0.00.00.00.00. 7.0.00 7.0.00 Galvanized Ga in Inches Lbs./Sq. Ft....99 0. 7.9 0. 7. 09..0...99. 7.9.. 7...07..99. 7.9..0 9.

Sheets Hot Rolled, Cold Rolled, Galvanized, & P&O In Inches Gauge Ga in Inches Lbs./Sq. Ft..09. Galvanized Ga in Inches Lbs./Sq. Ft. Weight per Sheet.0. In Inches Gauge Ga in Inches Lbs./Sq. Ft..99. Galvanized Ga in Inches Lbs./Sq. Ft. Weight per Sheet.0.0 x 9 x0 x 0 x 9 0 x 0 0 x.00 0.00 0.00 0.00.00.00.99. 7.9.. 9. x 9 x 0 x x 9 x 0 x 0.00 7.0.00 0.00 0.00 0.00.7. 0..99. 7. Gauge.07.0.0. Gauge.09.0.07. x 9 x 0 x x 9 x 0 x 0 x 9 0 x 0 0 x 0 Gauge x 9 x 0 x x 9 x 0 x.00 0.00 7.00.00.00 9.00.00 0.00 0.00.09..00.00.00.00 0.00 7.00.7. 77..99..9.09. 9.7 9. 9..99. 79.9 x 9 x 0 x 9 x 0 Gauge x 9 x 0 Gauge x 9 x 0 0 Gauge.00 0.00.00 0.00.079.70.00.0.09..00.7 7.7..99..07.90.7 7..07.7.7..07.7 x 9 x 0 x 0.77 9.7. Call 0--9 to Order!

Square Tubing (Inches) Gauge Thickness Thickness Pounds (Inches) Gauge Pounds x / x / x - x - - x - -/ x -/ x - x - x - x - x.0.0.0.0.07.0.9.0.0.9..0.0.9..0.0.0.9.0.0.0..0.7..909.0.0..07.7.9..00.00..99.0..0.00.700..0.7...0...7.90.9 7..9.7.7...7....70.. 9... x - x - x x 7 x 7 x x x x x / / / / / / /.....0... 7.7. 7..70.9.9 9...97. 9.0.7.. 9.0. 7...0 7.0. 7.9..0 0. 9... 7.9. 9..7. 0. 7.90. 7. 9... 7.07 9. 7.. 9..7 7..0 Call 0--9 to Order!

(Inches) - x x x - x - - x - x x - x - x - x x x x Rectangular Tubing Gauge Thickness Thickness.0.0.0.0.0.0.0.0.0.0.0.0.0.0 Pounds.07.7...99..7.....0...7..0.9...9.7.90.9 7...7.9.7.7...7....70.7....70. 9... 7.7. (Inches) x x x x 7 x 7 x 7 x x Gauge / Call 0--9 to Order! x x x. Pounds.70.9.9 9.. 9... 7.7.70.9.9 9..0.97. 9.0.7..97. 9.0.7. 7...9. 9.0. 7...97..7. 7...9.. 9.0. 7...0 7.0. 7.9..0

Rectangular Tubing (Inches) Gauge Thickness Thickness Pounds (Inches) Gauge Pounds x x x x x. 9.0 7.0. 7.9..0.. 9.7. 9... 7.9.. 9.9..79. x x x x x / /...7. 0. 7.90. 7..0.0.00 9.7. 0. 7.90. 7... 7.07.. 7.07 x 7.0.. x 7.. 9. x x / /.. 9... 7.9. 9.. 9...79. 7. x 0 x 0 x 9... 7.07 7.. 9..7 7..0 Call 0--9 to Order!

Call 0--9 to Order! 7 Thickness.0.9.7.9.7.9...7....909.99..9...7 Gauge / / -/ - - -/. Pounds Thickness.09.0.0.0.0.0.0.0.0.0.0..09..0 7 Gauge -/.90 - - - (Inches) Pounds.0.09.0.0.0.0.0.0.0.0 NOMINAL PIPE SIZES IN OUTSIDE DIAMETER I.P.S SCHEDULE WALL THICKNESS.0.0.7 0 0 0.09.0.09.0.0.9.0.09..07.9....0..9. / INSIDE DIAMETER..7..97....7.7 WEIGHT PER FOOT POUNDS Hot Rolled Pipe Round Tubing.70.79.09.7.9..99.09.7.70.07.9 7..0..7.97 7..90 Std Ex Hvy Std Ex Hvy Std Ex Hvy

Call 0--9 to Order! NOMINAL PIPE SIZES IN OUTSIDE DIAMETER I.P.S SCHEDULE WALL THICKNESS..00..0.900.7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.0.0.9.7.7.9.0....0.9..79..0.9.0.9..9..00..00.0.9.....0.0.7...00..00.7.7.....90..7...097.09.97..99.0...7.0.9....0..7.07.99.9.0.709..9...77.0.0.900..00 / - - - INSIDE DIAMETER..7..0.0.7...7.97..0.79.7..9.7..7.997.7..0.7..9.0.0...0 7. 9.09.7..79 7..0.9. 7.7... WEIGHT PER FOOT POUNDS Hot Rolled Pipe Std Ex Hvy XX Hvy Std Ex Hvy XX Hvy Std. Ex Hvy XX Hvy Std Ex Hvy XX Hvy Std Ex Hvy XX Hvy Std Ex Hvy XX Hvy Std Ex Hvy XX Hvy Std Ex Hvy XX Hvy

Call 0--9 to Order! 9 NOMINAL PIPE SIZES IN OUTSIDE DIAMETER I.P.S SCHEDULE WALL THICKNESS.000....70 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.0...0.7.7...7.9....70.9.....7..9..77..0.9.7..7.90...07..9.7..000...70....0.0......9.07....0.07.7.0.7.9.9.97.07.9..07 7.9 7. 7. 7.9 7.9 7.00.7...0..00 9.70 9. 9. 9.0.70 Hot Rolled Pipe - INSIDE DIAMETER.7.97 9.9.0.9..79.9 9.00. 7..9 7.770. 0.7 7.0.9. 7. 9.9.97.7.9.0. 9.9.0..70...9 0.9 0.9 7.7 7. 7.9.9.70.0. 0..7. 7.9 9.0..7 WEIGHT PER FOOT POUNDS Std Ex Hvy Std Ex Hvy XX Hvy Std. Ex Hvy XX Hvy Std. Ex Hvy XX Hvy Std. Hvy XX Hvy Std. Ex. Hvy XX

Call 0--9 to Order! NOMINAL PIPE SIZES IN OUTSIDE DIAMETER I.P.S SCHEDULE WALL THICKNESS.70.000.000.000 S S 0 0 0S 0 S 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0...0.0..7..000...9.70.97.09.0...0...9..0.90.090.000.9.70..7.0.70..7..000....7.000...9... 7 7.7 7 7. 7.000 Hot Rolled Pipe INSIDE DIAMETER..0..77 9... 7.. 7.. 9.7 0..7..7.7 7.09.9..7.7 70. 9..0...77 7... 9... 7.9 9.0 70.9.0 9. WEIGHT PER FOOT POUNDS Std. Ex. Hvy Std. Ex. Hvy Std. Ex. Hvy Std. Ex. Hvy

Call 0--9 to Order! NOMINAL PIPE SIZES IN OUTSIDE DIAMETER I.P.S SCHEDULE WALL THICKNESS.000 0.000.000 0.000.000.000 0.000.000 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0..70.97...7.9..0..70.9..7.9....0...7...7. 9 9 9.000..7 7.9 7. 7.000.0.000.7..0. 0.9 0.7 9.7 9. 9.7 9 9.000.70.000 Hot Rolled Pipe 0 0 0 INSIDE DIAMETER.. 70. 0.0. 7. 0..7 7.0..9. 0.9. 9.. 79.0. 9.. 0. 7.. 9. 7. 9...9 9.9.7 7. 9..7 9...9 00...70.9.9.7. WEIGHT PER FOOT POUNDS Std. Ex Hvy Std. Ex Hvy Std. Ex Hvy Std. Ex Hvy

Call 0--9 to Order! SIZE OF STRANDS () SIZE () & STYLE NO. WEIGHT IN POUNDS PER HUNDER SQ. FT. 0 7 70 7 0 0 0 0 79 0 0 90.00.00.00...9.9.9.9.090.0.0.0.0.0.0......7.7.....70.70..000...000...00.00.00.07.07.07.0.0.09.099.09...09.07.7..7..0..9 -No. -No- -No-0 -No.0 -No. -No.0 -No. -No. -No. /-No. /-No. /-No. /-No.9 -No. --No. --No. --No. --No. --No.9 --No. -No. -No.9.0.00.0.0.0.0.0.00.09.00.09.09..00.0.00.09.09..9.09. OVERALL THICKNESS ().9.9.9...000.000.000.000.70..7..70.70.70..07.07.07.0.0.070.9....9.9......7.09.0.09.00.00.09.09.00.070.0.0.070.0.0.00.070.0 CENTER TO CENTER OF BOND () SIZE OF OPENINGS () A Width B Length C Width D Length.0.0.0.00.00.0.0.0.0.00.00.00.00.0.00.00.00.00.00.00.00.00.7.7.7.79.79.9.9.9.9.70....0.... SIZE () & STYLE NO. WEIGHT IN POUNDS PER HUNDER SQ. FT. OVERALL THICKNESS () CENTER TO CENTER OF BOND () SIZE OF OPENINGS () A Width B Length D Length....0.0..........0.0.0.0.0.0.0.09.09..70....7.0.0.0.000 Width.0.0.090.....7...9..00..0...9.9...09.0.09.00.00.09.09.00.070.0.0.070.0.0.00.070.0 Width Flattened Expanded Metal Standard Expanded Metal Thickness SIZE OF STRANDS () - No. -No. -No.0 -No.0 -No. -No.0 -No. -No. -No. /-No. /-No. /-No. /-No.9 -No. --No. --No. --No. --No.9 0 7 0 0 7 7 7 Thickness C Width.00.00.00...9.9.9.9.090.0.0.0.0 *Standard sheet size is x. Other sizes is available. *Also available in Stainless

Expanded Metal Grating SIZE () & STYLE NO. WEIGHT IN POUNDS PER HUNDER SQ. FT. CENTER TO CENTER OF BOND () A Width B Length SIZE OF OPENINGS () C Width D Length SIZE OF STRANDS () Width Thickness OVERALL THICKNESS () lb.. lb. lb..7 lb. lb.. lb. 7 lb. 00 00 7 00 700..000.......00..00....9..9.000.....7..7..0.97.97.7.7........70.70 Bar Grating Smooth & Serrated Also available in Aluminum, Stainless, & Galvanized Standard space pattern is (9W) Bearing Bar Inches Weight Sq. Ft. Bearing Bar Inches Weight Sq. Ft. / x / / x x / x (std) x - x / - x (std) - x - x / - x.9..9 7. 9..0.7. 7.. - x -/ x -/ x x x - x - x - x - x...7... 0.0 7.0. Call 0--9 to Order!

0 Stainless Angles (Inches) 0ft (Inches) 0ft / x / x / x x / x x.9...9..00.0 9. x x x - x - x x..9.07....0.00 - x - x / x x - x - x / x x.0..9... 0.0 9.0.0.0.00. x x x x x X x x.07..90 7.0..0.00 9.00.00.00 x x /..00 x x x.0 9..00 9.00 0 Stainless Sheets & Plates Gauge & In Inches 0 gauge (.0) Weight per Square in Pounds.9 Standard s in Inches x 9 x 0 Weight per Sheet 7. 9.0 gauge (.0).0 x 9 x 0.. gauge (.09).0 x 9 x 0.00 0.00 gauge (.07). x 9 x 0 0..00 gauge (.). x 9 x 0.7 77.0 gauge (0).0 x 9 x 0. 0.0 ().79 x 9 x 0 7.. ().0 x 9 x 0 Call 0--9 to Order! 7..0

0 Stainless Rounds (Inches) 7/ 9/ / /.09.7..7....0. ft..00....0... / 7/ / 7/ (Inches).0.7.0.70..7.09..00 ft.0...0 0. 0.0 0.9. 7. 0 Stainless Squares (Inches) ft 7/ / / 7/...7....9.0.00. 7.0...9.7 7..0.9.9. 0..7 9. Call 0--9 to Order!

0 Stainless Flat (Inches) ft (Inches) ft / x / /..9....7..0..7....7 7..9.0.7.0 x / / 7..7.0.9.77 0.0..90.0..9.7.9..0..0 x / /.9.7..797.9..7.9.9..7 7. 9..7.9.0 9..9 x /.0 0.0 0.0 0..00.0.0.0.7.700.0.00.0.0.0 x / /....0.7..700..0.00.0. 7..0.7.0 7. 0.0.0 0.0 0..00.0 / x x 0.0.90.0 7.0 9..0.0.0.0.0..0..0 7.0.0.0.0.0.0 0.0 **Note: Due to different manufacturing processes weight per foot on flat bars may differ. All of our flat bars are weighed prior to being sold. Call 0--9 to Order!

0 Stainless Channel (inches) A x B x C Wt per foot Wt 0 x x x - x x x x x - x x x x x.0..7..0. 0.00.0..7..0. 0.00 0 Stainless Tubing 0 Stainless Pipe x x - x - x x - x - x x x x x x x x x x - x - x x x x x x x x x x x Pounds 0.7..00..70..0.9..0..0...700.00.7.0. / - - - Sch 0 Pounds...70.9.7.70. 7..9.7 9. Call 0--9 to Order! 7

Metal Building Components C-Pulins x x 0,, 0 Std. Lengths Z Purlins x x,, Std. Lengths Base Angle: x x ga x x ga 0 Std. Lengths Eve Struts: x x / 0, Std. Lengths We also offer R Panels and roof decking for all your metal building needs! Contact us for more information! Call 0--9 to Order!

Capabilities Cutting and Processing: Straight and Miter Cutting Structural shapes and bars Plate processing with Plasma: ga to thick Send us your drawing and we will quote you. Shearing and forming: to shearing to breaking Call 0--9 to Order! 9

Measurement Conversions Weight milligram (mg) = 0.00 grams (g) gram (g) = gram (g) ounce = 0.00 kilograms (kg) 0.079 ounces.9 grams (g) ounce = 0.0 pounds pound (lb) = ounces pound (lb) = 0.97 kilograms (kg) Length centimeter (cm) = inch = foot = millimeters (mm). centimeters (cm) 0.0 meters (m) foot = inches yard = feet meter (m) = 0 centimeters (cm) meter (m).99 feet kilogram (kg) = 00 grams kilogram (kg) kilogram (kg).79 ounces.0 pounds (lb) kilometer (km) kilometer (km) = 00 meters (m) 0.79 miles short ton = 000 pounds mile = ft metric ton = 00 kilograms (kg) mile =.09 kilometers (km) Call 0--9 to Order!

2024 © technodocbox.com Privacy Policy | Terms of Service | Feedback