Rework Technic pc MARTIN Expert 10.6 Rework for SMT Components REWORK TECHNIC PC www.martin-smt.de
Rework Excellence Clear and functional the standard set by MARTIN. With the intuitive and precise functions of the Expert 10.6, even demanding processes become easily executable tasks. You too can trust "Made by MARTIN". Reliably reworked components are our best testimonial. Precision control unit Placement nozzle with automatic 4-axes control High resolution camera Flexible REWORK TECHNIC PC Equip yourself for the future. Like its proven predecessors, the MARTIN Expert 10.6 is compatible with the smallest SMDs, large processor sockets, and tomorrow s technologies.
Proven Rely on MARTIN Technology. Extensive application experience and eminent precision have been proven thousands of times by our customers around the world for allmost three decades. Efficient Profit from the speed of the new MARTIN Expert 10.6. Quick and reliable processes, as well as an affordable price, provide maximum advantage. Hot Air soldering nozzle Hybrid Underheater with IR and convection Modules for residual solder removal and dispensing Support Wherever you are located, we are close by, and you can expect exceptional service and support. Competence, reliability and responsiveness are guaranteed, around the globe.
Your Edge in Placement The MARTIN Expert 10.6 offers a leading edge, camera driven alignment system, providing a flawless solution for the automatic placement process. From pre-alignment to final error-free placement, component accuracy is achieved and maintained.
Automatic and camera controlled Capture with just three mouse clicks. Generate the device coordinates. Automatic placement of the device onto the pad array. Auto Vision Technology Automated SMD placement provides ease of use for operators. The pads are displayed and marked on the screen. All component coordinates are established with just three mouse clicks. Placement is controlled in detail by the ca mera, and automatically positioned by the pickup tool. There is no faster, more exact, or more accurate way of positioning SMDs.
The Soldering Advantage The Expert 10.6 employs the highest standards in thermodynamics. PCBs are provided with the required basic heat rapidly, yet carefully from below. Combined with complementary heat from above, ensures the solder joints are precisely and accurately reflowed. This combination guaranties the best soldering results. Rapid Profile Based on Rapid Technology, this innovative profile guarantees a clear and effective process. The result is a time savings up to 30%. Diagram Profile This module duplicates production reflow oven profiles. Thermal values are simply transferred from a datasheet into the Easy Solder program.
Optional Extras Hot Air Precision MARTIN s Precision Hot Air technology en sures that the required soldering tempe - rature is reached without exceeding the maxi mum value specified for the SMD within a tolerance of only +/- 1%. Micro SMD Set For the processing of miniature components. Report software Allows access to all stored data of individual solder processes. Hybrid Technology The newly developed hybrid under-board heater is a combination of IR technology and hot-air convection. This unique solution to under-board heating provides both high power for shorter saturation times, and improved internal management for a more uniform thermal gradient within the board. Therefore board warpage is minimized. Soldering nozzles Sets for all BGAs, CSPs und SOs. Reballing Tools Facilitates the trouble free re-use of removed components. PCB Flex Support Helps to reduce board deformation during the rework process. Prebumping Hotprinter Stencil paste and reflow within one module.
Konzept und Realisierung: Sternwerfer Design MARTIN Expert 10.6 The set comes complete with Solder station DBL 06 with soldering pen, tool magazine, reballing holder, 2 soldering nozzles (4.0, 7.0 mm) Dis module with dispensing pen, 2 aluminium nozzles (0.3 mm), cleaning set Vac module with vacuum pen, 4 placement nozzles (0.7, 1.5, 6.3, 8.5 mm), 2 solder sucker nozzles (1.0, 1.4 mm), cleaner Measurement module with ultra fine sensors, 6 channels Underheater HIF 08 (3000 W) PCB table Smart Fix Compact with hand rest, cooling, 4 PCB holders and 2 PCB clips Auto Vision Placer with 5 automatic axes, camera, 2 lenses and 4 placement nozzles Second soldering pen for residual solder removal Foot switch, solder paste, solder balls, flux pen, flux cream CSP/BGA transfer tool, SMD hook Set with 7 soldering nozzles for all PLCCs, QFPs Box with consumables Rework ABC (handbook) MARTIN Rework software Easy Solder 05 (WIN XP/Vista/7) Technical details Max. PCB width 390 mm Max. PCB length 500 mm Footprint 460 x 865 mm Hot Air 2-35 I/min ± 1 I/min 150-400 C ± 1,0 % (repeatability) Underheater 600-3000 Watt 245 x 275 mm WIN software Easy Solder 05 Travel 75 mm / 75 mm / 23 mm / ±10 Resolution of axes 0,001 mm Resolution of camera 1944 x 2595 pixel Image size 14 x 18 mm (Flip Chip)* 28 x 37 mm (CSP) 37 x 50 mm (BGA/QFP) 65 x 85 mm (Maxi BGA)* Placement accuracy ± 0,015 mm (Flip Chip)* ± 0,03 mm (CSP) ± 0,04 mm (BGA/QFP) ± 0,07 mm (Maxi BGA)* MARTIN Expert 10.6XL Specific equipment Auto Vision Placer extended by 50 mm Underheater HIF 09 (5000 W) Specific technical data Max. PCB width 490 mm Max. PCB length 600 mm Footprint 630 x 1035 mm Underheater 1200-5000 Watt 420 x 450 mm Image size 75 x 95 mm (Maxi-BGA)* * Optional extra 06/2010 Martin GmbH, Argelsrieder Feld 1b, D-82234 Wessling Fon +49-(0)8153-9329-32, Fax +49-(0)8153-9329-39 info@martin-smt.de, www.martin-smt.de