Making complex building automation simpler together. KNX/SMI tubular drives for roller shutters and sun protection: with Becker.
2 Your own living room is a very special place. Here you can be who you are, you can feel good, and you can breathe freely. Today's house automation systems already offer possibilities which are undreamed of. One of many advantages: All the drives communicate with the central house control unit. The current position of all the roller-shutters can be displayed in real time on the terminals in the house, and controlled directly through the touch screen.
Table of contents 3 Building automation general considerations... 4 SMI tubular drives and mechanical accessories for roller shutter applications Tubular drives for barrels from diameter 38 mm... 6 Mechanical accessories for barrels from diameter 38 mm... 7 Tubular drives for barrels from diameter 50 mm... 8 Mechanical accessories for barrels from diameter 50 mm... 9 SMI tubular drives and mechanical accessories for interior shading Tubular drives for barrels from diameter 38 mm... 10 Mechanical accessories for interior shading... 11 SMI tubular drives and mechanical accessories for sun protection applications Tubular drives for barrels from diameter 50 mm... 14 Mechanical accessories for barrels from diameter 50 mm... 15 Tubular drives for barrels from diameter 63 mm... 16 Mechanical accessories for barrels from diameter 63 mm... 17 C-Plug Plug-in Becker connecting cable... 18 Tool... 19 SMI electrical accessories SMI actuator... 20 SMI programming unit... 20 USB SMI tool... 21 SMI connecting terminal... 21 SMI software and tools SMI Hirschmann set... 22 SMI/KNX software tool... 23 SMI EasyMonitor... 23 Load tables Load tables for roller shutters and sun protection drives... 24 Load tables for awning drives... 25 General conditions of sale... 26 Note: You can download the installation guidelines for SMI from www.becker-antriebe-objektportal.de, or you can request them from a Becker contact partner.
4 Building automation Open to everything A system that can overcome the problems of "individual solutions" is needed if the control information is to be transmitted to all the building automation components: it must ensure that all the components communicate with one another using a common language. Putting it briefly, a system that operates independently of the manufacturer and of the application, such as the KNX bus, is needed. Energy Comfort Accessibility Energy efficiency Safety Communication Multimedia Data Good for your customers 1 Protection against sun, heat and UV Presence simulation 2 3 4 You are not at home, and the sun is beating down mercilessly. Your roller shutter or your external blinds are closed by the automatic sun protection control. The heat stays outside, while the interior is protected from the bleaching effect of UV radiation. Protection from wind and rain If the awning is operated automatically, the use of a wind or rain sensor means that nothing will go wrong even when a storm blows up. Convenient roller shutter operation Everything is easier with a central control unit for roller shutters: just press one button, and all the roller shutters that are fitted with electrical drives will move. Or you can let it happen automatically whenever you want. Energy saving Thanks to an intelligent roller shutter controller you can save energy for the air conditioning in summer, for heating in winter. 5 6 7 Depending on the system, occupancy can be simulated, moving the roller shutters according to a random rule, and switching the light on and off in line with a selected profile. If you now leave the house for several days, it will operate the lights and the shading control just as if you were at home. Flexible options for operation Flexible operation of all the household equipment at various locations has many advantages, and not only for the elderly or sick. For example, all the lighting can be switched off, and all the roller shutters in the house can be controlled from certain points such as the front door or the bed. Intrusion detection system It detects an attempted break-in, switches the light on in the building, and raises or lowers the roller shutter. The potential intruder is deterred even if you are not at home. Networked exterior cameras are triggered by a motion sensor to record persons, sending the image to a home server. The householder can therefore see what is happening on the television or over the Internet when out and about. At night the lighting is switched on at the same time as a deterrent.
5 SMI the engineering solution for roller shutters and sun protection Electrical drives for roller shutters and sun protection installations can also be integrated into the KNX bus system with the standardised SMI (Standard Motor Interface). Becker supplies tubular drives with integrated SMI interfaces as well as the corresponding SMI actuator. Planners, roller shutter and sun protection drive engineers, and electricians can offer their end-customers a particularly economical automation solution with this system concept. This is because, thanks to the ability to connect the drives in parallel, only one 5-core cable is required for the power supply and for bidirectional data transmission between the SMI actuators and the drives the amount of wiring is reduced significantly. Every Becker SMI actuator controls up to eight drives; it supports all the standard SMI functions as well as additional functions parameterised by Becker. Switch cabinet with KNX actuators Switch cabinet with SMI actuators KNX network WITHOUT SMI drives KNX network WITH SMI drives Genuine bi-directional operation using the data supplied by the drive for status queries, detection of disconnection/broken cable, and signalling. A visual display based on true values. Exact positioning through incremental measurement of travel distance. I- 2nd data line Colour grey I+ Data line Colour black One cable for power supply and data exchange ensures perfect automation
6 Roller shutter applications P5/16C PR+ SMI P9/16C PR+ SMI Tubular drives with electronic limit switching for barrels from diameter 38 mm Highlights Smooth, quiet running Usable with or without anti-lifting device Switches off automatically when blocked (e.g. frozen curtain) Automatic shading solution length adjustment Supports parallel connection SMI functions Changing direction of rotation via integrated switch Stopping at any position UP/DOWN travel Step UP/DOWN function (2 510 / 2 step) Two fixed positions between top and bottom Travel to the two intermediate positions from any position of the shading solution (0 % 100 %) Feedback of the current position (0 % 100 %) Feedback of the motor status Synchronous starting when drive command issued Technical data Drive torque 5 / 9 Nm Speed 16 min -1 Limit switch range 64 revolutions Rated Voltage 230 V AC / 50 Hz Mode S2 4 min Degree of protection IP44 Connecting cable C-Plug, p. 18 Item number Item designation Rated current 2009 120 502 0 P5/16C PR+ SMI 0.36 A 85 W 2009 120 501 0 P9/16C PR+ SMI 0.47 A 110 W Power consumption Details Operation possible without fixed stops Universal use in many shading solutions with or without stop systems. No increase in inventory requirements through various drive types. Usable for roller shutters with and without antilifting devices No increase in inventory requirements through various drive types. Automatic shading solution length adjustment when stops are used Same view with open roller shutters. No change in position from, e.g., temperature effects. Automatic detection of anti-lifting devices Makes a break-in more difficult by pressing down the roller shutter curtain. Blockage detection if the end strip is frozen solid Roller shutter curtains are protected from being damaged by overload. Easy, cost-saving cable laying Information wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next. Suitable for left and right installation Soft upper stop Low stress on the curtain and stop through continuous optimisation of the stop forces. Motor head can be overwrapped Usable even in very restricted spaces. Motor protected against overheating Temperature monitor switches off when overheated to avoid damaging the motor or the shading solution. These drives with a 5-core cable for power supply and data transmission are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator. High flexibility High flexibility as cable plugs into various C-Plugs. Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
29 mm 7 SMI recommended mechanical accessories for roller shutter applications Wall bracket with catch Wall bracket with catch for mini strip Drives for roller shutters R7/17 R20/17 Item no. 4930 300 382 0 Mini strip-p C-Plug 6,4 mm 48 mm Mini strip M6/48 incl. screws Drives for roller shutters and sun protection P5/16 P13/9 Item no. 4930 200 232 0 Octagonal shaft Drive adapter Ring Manufacturer Name P5/20 P13/9 Selve Drive adapter S40 Ring S40 4930 300 083 0 4930 300 085 0 No illustration No illustration Tube clamp for suspension spring S40 4930 300 307 0 Selve Drive adapter S50 4930 300 121 0 8kt SW 50 12 17 13,5 Ring S50 4930 200 069 0 8kt SW 54 Intermediate ring 50x1.5 4930 300 102 0 24,75 Selve, Weisbender, Staffer, V. Müller Drive adapter S60 Ring S60 Intermediate ring 50x1.5 4930 300 041 0 4930 020 707 2 4930 300 102 0 See the tubular drives product catalogue for further mechanical accessory components.
8 Roller shutter applications R8/17C PR+ SMI R40/17C PR+ SMI Tubular drives with electronic limit switching for barrels from diameter 50 mm Highlights Smooth, quiet running Usable with or without anti-lifting device Switches off automatically when blocked (e.g. frozen curtain) Automatic shading solution length adjustment Supports parallel connection SMI functions Changing direction of rotation via integrated switch Stopping at any position UP/DOWN travel Step UP/DOWN function (2 510 / 2 step) Fixed position between top and bottom Travel to any 2 fixed positions (0 % 100 %) Feedback of the current position (0 % 100 %) Feedback of the motor status (including error report) Synchronous starting when drive command issued Technical data Drive torque Speed 17 min -1 Limit switch range Rated Voltage Mode Degree of protection 8 / 12 / 20 / 30 / 37 Nm 64 revolutions 230 V AC / 50 Hz S2 4 min IP44 Connecting cable C-Plug, p. 18 Item number Item designation Rated current Power consumption 2010 120 501 0 R8/17C PR+ SMI 0.50 A 115 W 2010 120 502 0 R12/17C PR+ SMI 0.53 A 125 W 2020 120 501 0 R20/17C PR+ SMI 0.77 A 175 W 2030 120 501 0 R30/17C PR+ SMI 0.96 A 225 W 2040 120 501 0 R40/17C PR+ SMI 1.18 A 230 W These drives with a 5-core cable for power supply and data transmission are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator. Details Operation possible without fixed stops Universal use in many shading solutions with or without stop systems. No increase in inventory requirements through various drive types. Usable for roller shutters with and without anti-lifting devices No increase in inventory requirements through various drive types. Automatic shading solution length adjustment when stops are used Same view with open roller shutters. No change in position from, e.g., temperature effects. Automatic detection of anti-lifting devices Makes a break-in more difficult by pressing down the roller shutter curtain. Blockage detection if the end strip is frozen solid Roller shutter curtains are protected from being damaged by overload. Easy, cost-saving cable laying Information wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next. Suitable for left and right installation Soft upper stop Low stress on the curtain and stop through continuous optimisation of the stop forces. Motor head can be overwrapped Usable even in very restricted spaces. Motor protected against overheating Temperature monitor switches off when overheated to avoid damaging the motor or the shading solution. High flexibility High flexibility as cable plugs into various C-Plugs. Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
9 SMI recommended mechanical accessories for roller shutter applications Universal wall bracket Universal wall bracket for mounting pin 3/20 and connecting piece diameter 20 mm Drives for roller shutters R7/17 R40/17 Item no. 4930 200 005 0 Mounting pin 3/20 Mounting pin 3/20 (round, d = 20 mm) Drives for roller shutters and sun protection R7/17 R50/11 Item no. 4930 200 028 0 Octagonal shaft Drive adapter Ring Manufacturer Name R8/17 R50/11 Selve Drive adapter S50 Ring S50 4930 300 121 0 4930 300 122 0 Selve, Weisbender, Staffer, V. Müller Drive adapter S60L Ring S60L 4930 300 466 0 4930 300 465 0 SHG Drive adapter M60 Ring M60 4930 300 043 0 4930 050 701 0 Drive adapter ROLM60 Ring ROLM60 4930 300 044 0 4930 300 037 0 Selve, SHG, Weisbender, Eckermann Drive adapter SM70 Ring SM70 4930 300 045 0 4930 000 607 0 See the tubular drives product catalogue for further mechanical accessory components.
10 Sun protection applications P5/20C PS SMI P9/16C PS SMI Tubular drives with electronic limit switching for barrels from diameter 38 mm Highlights Smooth, quiet running Automatic shading solution length adjustment Supports parallel connection Optimum adjustment of the closing force Universally applicable SMI functions Changing direction of rotation via integrated switch Stopping at any position UP/DOWN travel Step UP/DOWN function (2 510 / 2 step) Fixed position between top and bottom Travel to any 2 fixed positions (0 % 100 %) Feedback of the current position (0 % 100 %) Feedback of the motor status (including error report) Synchronous starting when drive command issued Technical data Drive torque 3 / 5 / 9 Nm Speed 16 / 20 / 30 min -1 Limit switch range Rated Voltage Mode Degree of protection 64 revolutions 230 V AC / 50 Hz S2 4 min IP44 Connecting cable C-Plug, p. 18 Item number Item designation Rated current 2009 130 504 0 P3/30C PS SMI 0.36 A 85 W 2009 130 502 0 P5/20C PS SMI 0.36 A 115 W 2009 130 503 0 P5/30C PS SMI 0.47 A 115 W 2009 130 501 0 P9/16C PS SMI 0.47 A 110 W Power consumption Details Operation possible without fixed stops Universal use in many shading solutions with or without stop systems. No increase in inventory requirements through various drive types. Automatic shading solution length adjustment when stops are used Elongation of the cloth as a result of temperature changes or ageing is automatically compensated for. The installation does not have to be readjusted. Optimum adjustment of the closing force Protection of the cloth and the seams through continuous optimisation of the closing forces. Universally applicable for many shading systems No increase in inventory requirements from many variants. Easy, cost-saving cable laying Information wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next. Suitable for left and right installation Motor head can be overwrapped Usable even in very restricted spaces. Motor protected against overheating Temperature monitor switches off when overheated to avoid damaging the motor or the shading solution. Blockage detection Switches off when blocked to protect the system. High flexibility High flexibility as cable plugs into various C-Plugs. These drives with a 5-core cable for power supply and data transmission are also available with the SMI interface, specially for KNX bus installations. Suitable accessory: the SMI actuator. Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
65 11 SMI recommended mechanical accessories for sun protection applications Interior shading fastening system for PICO SMI drives Drive adapter Ring Manufacturer Name Shaft diameter P5/20 P13/9 Benthin L rollers Drive adapter 52/62 mm 4930 300 442 0 Ø 47,5 60 65 19,5 17 Ø 47,5 3,1 30 27 Ring S50 52/62 mm 4930 300 443 0 Ø 36,9 3,1 60 Ø 50 Wall bracket 4930 300 432 0 Drive adapter 40x1 / 42x2 40/42 mm 4930 300 086 0 Ring 40x1 / 42x2 40/42 mm 4930 300 087 0 Helioscreen Drive adapter 47x2 47 mm 4930 300 305 0 Ring 47x2 47 mm 4930 300 306 0 Awning bracket Awning bracket with star for mounting pins 1/10 and 2/10 and connecting piece diameter 10 mm Drives for sun protection R7/17 R50/11 Item no. 4930 300 053 0 Connecting piece Connecting piece incl. screws, 4-sided, 10 mm Drives for roller shutters and sun protection P5/16 P13/9 Item no. 4930 200 140 0
12 SMI recommended mechanical accessories for sun protection applications Round tube Drive adapter Ring Manufacturer Name P5/20 P13/9 Drive adapter 38x1 / 40x2 4930 300 088 0 Drive adapter 40x1 / 42x2 Ring 40x1 / 42x2 4930 300 086 0 4930 300 087 0 Drive adapter 40x1.3 / 40x1.5 Ring 40x1.3 / 40x1.5 4930 300 195 0 4930 300 196 0 Grooved shaft Drive adapter Ring Manufacturer Name P5/20 P13/9 Drive adapter 50x2 Ring 50x2 4930 300 103 0 4930 300 104 0
13
14 Sun protection applications R8/17C PS SMI R50/11C PS SMI Tubular drives with electronic limit switching for barrels from diameter 50 mm Highlights Smooth, quiet running Automatic shading solution length adjustment Supports parallel connection Optimum adjustment of the closing force Universally applicable SMI functions Changing direction of rotation via integrated switch Stopping at any position UP/DOWN travel Step UP/DOWN function (2 510 / 2 step) Fixed position between top and bottom Travel to any 2 fixed positions (0 % 100 %) Feedback of the current position (0 % 100 %) Feedback of the motor status (including error report) Synchronous starting when drive command issued Technical data Drive torque 8 / 12 / 20 / 30 / 40 / 50 Nm Speed R8 R40 17 min -1 / R50 11 min -1 Limit switch range 64 revolutions Rated Voltage 230 V AC / 50 Hz Mode S2 4 min Degree of protection IP44 Connecting cable C-Plug, p. 18 Item number Item designation Rated current Power consumption 2010 130 501 0 R8/17C PS SMI 0.50 A 115 W 2010 130 503 0 R12/17C PS SMI 0.53 A 125 W 2020 130 501 0 R20/17C PS SMI 0.77 A 175 W 2030 130 501 0 R30/17C PS SMI 0.96 A 225 W 2040 130 501 0 R40/17C PS SMI 1.18 A 230 W 2050 130 501 0 R50/11C PS SMI 1.10 A 255 W 2010 130 502 0 R8/17C PS+ SMI 0.50 A 115 W 2010 130 504 0 R12/17C PS+ SMI 0.53 A 125 W 2020 130 502 0 R20/17C PS+ SMI 0.77 A 175 W 2030 130 502 0 R30/17C PS+ SMI 0.96 A 225 W 2040 130 502 0 R40/17C PS+ SMI 1.18 A 230 W 2050 130 502 0 R50/11C PS+ SMI 1.10 A 225 W Details Operation possible without fixed stops Universal use in many shading solutions with or without stop systems. No increase in inventory requirements through various drive types. Automatic shading solution length adjustment when stops are used Elongation of the cloth as a result of temperature changes or ageing is automatically compensated for. The installation does not have to be readjusted. Optimum adjustment of the closing force Protection of the cloth and the seams through continuous optimisation of the closing forces. Higher closing force for cassette awnings (PS+) Avoids soiling the cloth through open cassette. Universally applicable for many shading systems No increase in inventory requirements from many variants. Easy, cost-saving cable laying Information wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next. Suitable for left and right installation Easy limit position adjustment Setting the limit position conveniently from the ground without having access to the drive. Mounting pin can be mounted easily Mounting pin can be mounted and removed without use of a tool. High flexibility High flexibility as cable plugs into various C-Plugs. These drives with a 5-core cable for power supply and data transmission are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator. Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
15 SMI recommended mechanical accessories for sun protection applications Awning bracket Awning bracket with star for mounting pins 1/10 and 2/10 and connecting piece with 10 mm diameter Drives for sun protection R7/17 R50/11 Item no. 4930 300 053 0 Mounting pin 2/10 Mounting pin 2/10 (4-sided, 10 mm) Drives for roller shutters and sun protection R7/17 R50/11 Item no. 4930 200 030 0 Grooved shaft Drive adapter Ring Manufacturer Name R8/17 R50/11 Drive adapter 63N plastic up to 25 Nm 4930 300 084 0* Drive adapter 63N diecast 4930 300 052 0 30 Ø65,5 26,5 Ring 63N 4930 300 415 0 Ø60,5 R4 Drive adapter DW74N 4930 300 056 0 17 Ring DW74N 4930 010 707 2 Drive adapter DW78R+F diecast 4930 300 091 0 Ring DW78R+F 4930 300 033 0 Drive adapter DW85N only up to 30 Nm 4930 300 065 0 Diecast drive adapter for 40 and 50 Nm 4930 300 410 0 Ring DW85N 4930 300 066 0 See the tubular drives product catalogue for further mechanical accessory components. * R8/17-R20/17
16 Sun protection applications L50/17C PS SMI L120/11C PS SMI Tubular drives with electronic limit switching for barrels from diameter 63 mm Highlights Smooth, quiet running Automatic shading solution length adjustment Supports parallel connection Optimum adjustment of the closing force Universally applicable SMI functions Changing direction of rotation via integrated switch Stopping at any position UP/DOWN travel Step UP/DOWN function (2 550 / 2 step) Fixed position between top and bottom Travel to any 2 fixed positions (0 % 100 %) Feedback of the current position (0 % 100 %) Feedback of the motor status (including error report) Synchronous starting when drive command issued Technical data Drive torque 50 / 60 / 70 / 80 / 120 Nm Speed L50 and L70 17 min -1 L60, L80 and L120 11 min -1 Limit switch range 64 revolutions Rated Voltage 230 V AC / 50 Hz Mode S2 4 min Degree of protection IP44 Connecting cable C-Plug, p. 18 Item number Item designation Rated current Power consumption 2050 130 503 0 L50/17C PS SMI 1.40 A 315 W 2060 130 501 0 L60/11C PS SMI 1.20 A 265 W 2070 130 501 0 L70/17C PS SMI 1.90 A 430 W 2080 130 501 0 L80/11C PS SMI 1.40 A 310 W 2120 130 501 0 L120/11C PS SMI 1.90 A 435 W 2050 130 504 0 L50/17C PS+ SMI 1.40 A 315 W 2060 130 502 0 L60/11C PS+ SMI 1.20 A 265 W 2070 130 501 0 L70/17C PS+ SMI 1.90 A 430 W 2080 130 502 0 L80/11C PS+ SMI 1.40 A 310 W 2120 130 502 0 L120/11C PS+ SMI 1.90 A 435 W Details Operation possible without fixed stops Universal use in many shading solutions with or without stop systems. No increase in inventory requirements through various drive types. Automatic shading solution length adjustment when stops are used Elongation of the cloth as a result of temperature changes or ageing is automatically compensated for. The installation does not have to be readjusted. Optimum adjustment of the closing force Protection of the cloth and the seams through continuous optimisation of the closing forces. Higher closing force for cassette awnings (PS+) Avoids soiling the cloth through open cassette. Universally applicable for many shading systems No increase in inventory requirements from many variants. Easy, cost-saving cable laying Information wires and power lines are integrated into one 5-core cable. Parallel connection facility permits linking from one drive to the next. Suitable for left and right installation Easy limit position adjustment Setting the limit position conveniently from the ground without having access to the drive. Mounting pin can be mounted easily Mounting pin can be mounted and removed without use of a tool. High flexibility High flexibility as cable plugs into various C-Plugs. These drives with a 5-core cable for power supply and data transmission are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator. Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
4 29 17 SMI recommended mechanical accessories for sun protection applications Awning bracket Awning bracket with star M8 for mounting pins 1/16, 2/16 and 4/16 Drives for sun protection L44/14 L120/11 Item no. 4931 300 209 0 Mounting pin 2/16 Mounting pin 2/16 (4-sided, 16 mm) Drives for roller shutters and sun protection L44/14 L120/11 Item no. 4931 200 034 0 Grooved shaft Drive adapter Ring Manufacturer Name L44/14 L120/11 Drive adapter DW 78x1 4931 300 079 0 Ring DW78x1 4931 210 707 1 Drive adapter DW78N, 4 mm centre offset 4931 300 086 0 Ø 75 14 30 4 Ø 75,5 14 Ø 80 55 52 Ring DW78N, 4 mm centre offset 4931 230 707 0 19,2 Diecast drive adapter for 40 and 50 Nm 4931 300 078 0 Ring DW 85N 4931 300 227 0 See the tubular drives product catalogue for further mechanical accessory components.
18 Plug-in Becker connecting cable 5-core for SMI drives Details High flexibility as connecting cable plugs into various C-Plugs. Our service: To make things easier for you, the 5-core SMI C-Plug plug-in connecting cables are delivered pre-mounted on the drives (plugged in). 6 adhesive labels are attached to the connecting cables with the SMI Key ID of the respective drive, as plain text for documentation purposes and as a barcode for detection by scanners. They can easily be dismantled on site if a different connecting cable is needed according to the circumstances when installing. No screw connection is necessary, thereby simplifying mounting and disassembly Drive head can be overwrapped Degree of protection IP44 Only a conventional terminal screwdriver with a narrow blade is needed for mounting/dismantling the drive cable White cables enable unobtrusive integration, even in visible areas. UV-resistant rubber cable Black cable allows unobtrusive integration amongst dark or black elements. Dismantling the cable when fitted into the roller shutter box is usually possible (depending on the installation position) Available versions Plug-in connecting cable with wire end ferrules with Hirschmann plug type STAS 4N incl. securing clip, SMI Connecting cable (m) Item number 1 2010 270 612 0 2 (Standard) 2010 270 605 0 3 2010 270 649 0 5 2010 270 614 0 10 2010 270 615 0 0.5 2010 270 616 0 2 2010 270 617 0 5 2010 270 618 0 These drives with a 5-core cable for power supply and data transmission are also available with the SMI interface specially for KNX bus installations. Suitable accessory: the SMI actuator. Every drive is subject to comprehensive series testing according to VDE guidelines on the series test beds specially developed for the purpose. This guarantees the highest possible quality of our products.
19 Tool One side for mounting One side for dismantling Secure engagement and release of the C-Plug connector Easy and reliable application of the C-Plug tool through guidance along the connecting cable For drives with tube diameters 45 and 58 mm Item no. 2010 300 365 0 Mounting with a terminal screwdriver Dismantling with a terminal screwdriver Click 1. Terminal screwdriver with narrow blade Locating lug Locating latch 2. Mounting with C-Plug tool Dismantling with C-Plug tool Mounting side Dismantling side 1. C-Plug tool 2.
20 SMI actuators and accessories BECKER-KNX/SMI actuator (Roller shutter, sun protection and blind actuator) 8-way, REG 2TE/rail mounting assembly Details KNX/SMI actuator to control up to 8 SMI drives, connectable over just one ring cable, e.g. 5 x 1.5 mm². With genuine, active position determination through bidirectional drive feedback. compatible with KNX. Bus connection via KNX bus connection terminal. Mains and SMI drive cables connected via screw terminals Technical data Rated Voltage Item no. 4002 000 003 0 230 V AC / 50 Hz EIB operating voltage via BUS 21 32 V= Degree of protection IP 20 Permissible -5 to +45 C ambient temperature Type of mounting REG 2TE / rail mounting Colour grey Dimensions (W x H x D) 36.5 x 90 x 58.5 mm Installed height above the 53.5 mm mounting rail Cord switch adjustment set for commissioning SMI drives Details 2 m mains cable 2.8 m drive connecting cable with 5-way push-in terminal or 0.3 m cable with Hirschmann coupling Technical data Mains connection 230 V / 50 Hz Degree of protection IP 20 Capacity 5 A Cable colour black Item no. 4935 200 034 0
21 BECKER USB SMI tool Requirements Computer with Windows 98, 2000 or XP or higher operating system USB interface Downloadable "SMI EasyMonitor" software Item no. 4002 000 004 0 SMI connecting terminal Item no. 4816 050 000 5
22 SMI software and tools SMI Hirschmann set consisting of: Details Hirschmann plug STAS 4 N, black Item no. 4809 002 002 0 Hirschmann coupling STAK 4 N, black Item no. 4809 002 003 0 Securing clip STASI 4 Item no. 4809 004 000 1 Components can be ordered individually
23 SMI-/KNX software tool This tool establishes communication from the PC via the bus coupler to the actuator. The ETS must be in "offline mode" with respect to the KNX bus for this purpose. Searching the SMI bus for the drives connected to the respective actuator is supported. The SMI drives are identified and clearly presented for diagnostics and service. Adjustments and drive commands (individual and grouped) can be carried out on site. Requirements computer with Windows 98, 2000 or XP or higher operating system Becker KNX/SMI actuator 4002 000 003 0 Software can be downloaded free from the homepage requirement: RS232 interface on the PC Functions Identification of the manufacturer code Identification of the KEY-ID Assignment of a slave address Commands: UP/DOWN/STOP/STEP-UP/STEP-DOWN SMI EasyMonitor "SMI EasyMonitor" allows the bus function of the installation to be checked easily (knowledge of the higher-level building system is not necessary). It is necessary to disconnect the bus connector from the KNX side of the actuator for this purpose. Requirements Computer with Windows 98, 2000 or XP or higher operating system USB interface Becker USB SMI tool 4002 000 004 0 Can be downloaded free from the homepage Functions Identification of the manufacturer code Identification of the KEY-ID Assignment of a slave address commands: UP/DOWN/STOP/STEP-UP/STEP-DOWN
24 Load table for roller shutters and sun protection drives for SMI drive types: PS, PS+, PR, PR+ Shaft diameter (mm) 40 50 50 60 60 70 78 85 108 125 Roller shutter height (m) 1.4 2.2 1.4 2.2 1.4 2.2 1.4 2.2 1.4 2.2 1.4 2.2 1.4 2.2 1.4 2.2 2.2 3.0 2.2 3.0 Profile thickness (mm) 8 8 8 8 14 14 8 8 14 14 14 14 14 14 14 14 19 19 19 19 Type Nm/rpm -1 P3/30 3/30 9 8 8 7 7 6 7 7 6 5 - - - - - - - - - - P5/16 5/16 15 13 13 12 11 9 12 11 10 9 - - - - - - - - - - P5/20 5/20 15 13 13 12 - - 12 11 10 9 - - - - - - - - - - P5/30 5/30 15 13 13 12 - - 12 11 10 9 - - - - - - - - - - P9/16 9/16 27 23 25 22 - - 22 20 20 17 - - - - - - - - - - P13/9 13/9 38 33 35 31 - - 31 29 - - - - - - - - - - - - R8/17 8/17 - - 22 19 18 15 20 18 17 15 16 15 15 14 15 13 - - - - R12/17 12/17 - - 33 29 27 23 30 27 26 23 24 22 23 21 22 20 - - - - R20/17 20/17 - - 55 49 44 38 50 45 43 38 41 37 39 35 37 34 - - - - R30/17 30/17 - - 83 73 - - 75 68 64 57 61 55 58 53 56 50 - -- - - R40/17 37/17 - - 102 91 - - 93 85 79 70 75 68 72 65 69 62 - - - - R50/11 50/11 - - 139 123 - - 125 114 107 94 102 92 97 88 94 84 - - - - L44/14 44/14 - - - - - - - - - - 90 81 85 77 82 74 66 63 61 57 L60/11 60/11 - - - - - - - - - - 122 111 116 106 112 101 83 79 78 72 L80/11 80/11 - - - - - - - - - - 163 148 156 141 150 135 11 106 104 98 L120/11 120/11 - - - - - - - - - - 245 222 233 211 225 202 167 159 156 145 The tensile load figures are guidelines for single-piece roller shutter curtains. The friction typical for roller shutters has been taken into account! Example: Shaft diameter 60 mm, profile thickness 14 mm, 23 kg curtain weight, roller shutter height 2.20 m = R12/17 Tensile load figures in kg
25 Load table for awning drives Assumption: 78 mm shaft diameter, 20 drop angle for SMI drive types: PS, PS+ Drive torque (Nm) depending on drop lengths (m) 2m 2.5m 3m 3.5m 4m 4.5m 5m Number of arms Width (m) Type R Type L Type R Type L Type R Type L Type R Type L Type R Type L Type R Type L Type R Type L 2 3.0 30 44 30 44 30 X 40 X 50 44 50 44 50 44 2 4.5 30 44 30 44 40 X 40 X 50 44 50 44 50 44 2 6.0 30 44 40 44 40 X 40 X 50 44 50 44 50 44 3 4.5 40 44 40 44 50 44 50 60 X 80 X 80 X 80 3 6.0 40 44 40 44 50 44 50 60 X 80 X 80 X 80 3 7.5 40 44 40 44 50 44 50 60 X 80 X 80 X 80 4 6.0 50 60 50 60 X 60 X 80 X 120 X 120 X 120 4 7.5 50 60 50 60 X 60 X 80 X 120 X 120 X 120 4 9.0 50 60 50 60 X 60 X 80 X 120 X 120 X 120 Becker does not accept any responsibility for the accuracy of information. Due to the large number of different brands/models and the corresponding variety in drive power requirements, the Nm data provided are non-binding and intended as a guideline only.
26 Standard conditions of sale Note: Please ask for the updated General Terms and Conditions with our local subsidiary/representatives in your country as these may be different from those hereunder.
27
8/2012 4995 802 145 0 A good feeling... something on which, with BECKER, not only your customers but also you can rely. Because we share one goal: to inspire people through innovative products and expert service. And that's just easier done together. With Becker. BECKER-Antriebe GmbH Drives and control units for roller shutters, sun protection and doors Friedrich-Ebert-Strasse 2 4 35764 Sinn, Germany Tel.: +49 (0) 27 72 / 507-0 Fax: +49 (0) 27 72 / 507-151 Item number 4995 802 145 1 psv marketing info@becker-antriebe.com www. becker-antriebe.com