Retroreflective Mode with Polarizing Filter Supply Sensing Mode Connection Voltage Output Mode Part Number Terminal RP76-L00MN-CY6TU-PF RP76-L00MP-CY6TU-PF 0- DC /, Timing delay, Timing delay RP76-L00MD-CY6TU-PF RP76-L00MN-CY6TU-TP RP76-L00MP-CY6TU-TP /,Timing delay RP76-L00MD-CY6TU-TP LED red:660nm o o QuickDisconnect(0or90settled) - DC/ -AC (-wire), Timing delay (-wire) L.O./D.O. (-wire) RP76-L00MR-CY6TL-PF RP76-L00MR-CY6TL-TP RP76-L00MN-CY6QUE-PF RP76-L00MP-CY6QUE-PF Ag: 0- DC (Euro Style) - DC/ -AC (Micro Style) /, Timing delay, Timing delay /,Timing delay (-wire), Timing delay (-wire) L.O./D.O. (-wire) RP76-L00MD-CY6QUE-PF RP76-L00MN-CY6QUE-TP RP76-L00MP-CY6QUE-TP RP76-L00MD-CY6QUE-TP RP76-L00MR-CY6QLM-PF RP76-L00MR-CY6QLM-TP Quick Disconnect swivel 90 o RP76-L00MN-CY6QUE-PS RP76-L00MP-CY6QUE-PS 0- DC (Euro Style) /, Timing delay RP76-L00MD-CY6QUE-PS RP76-L00MN-CY6QUE-PT, Timing delay RP76-L00MP-CY6QUE-PT Retro-reflective Mode with Polarizing Filter Sensing Distance:0m(Note) 6" Pigtail - DC/ -AC (Micro Style) 0- DC (Euro Style) /,Timing delay (-wire), Timing delay (-wire) L.O./D.O. (-wire) /, Timing delay RP76-L00MD-CY6QUE-PT RP76-L00MR-CY6QLM-PS RP76-L00MR-CY6QLM-PT RP76-L00MN-CY6PUE-PF RP76-L00MP-CY6PUE-PF RP76-L00MD-CY6PUE-PF RP76-L00MN-CY6PUE-TP, Timing delay RP76-L00MP-CY6PUE-TP /,Timing delay RP76-L00MD-CY6PUE-TP - DC/ -AC (Micro Style) (-wire), Timing delay (-wire) L.O./D.O. (-wire) RP76-L00MR-CY6PLM-PF RP76-L00MR-CY6PLM-TP P-
Specifications (DC) Item Sensing Mode Thru-beam Retrorefletive Diffuse Standard Diffuse (background suppression) Glass Fiber Optic (with polarizing filter) Sensing Range,Adjustable Angle of Divergence 8m 0m (Note) 800 mm 00 mm approx. o approx..7 o approx.. o approx..7 o Depends on fiber optic used Light Spot Size 50mm@0m 50mm@5m 5mm@800mm 7mm@00mm Light Source Infrared 880nm Red Light 660nm Infrared 880nm Infrared 880nm Red Light 660nm Response Time/Frequency <=ms/500hz <=ms/50hz <=ms/500hz Supply Voltage 0- DC (limit values) Current Consumption (no load) <5 ma Ripple (within Vs tolerance) <= 5 V peak-to-peak Indicator LED Output Type Output Voltage High Output Voltage Low Output Current Max. Operation Mode Housing Material Enclosure Rating Circuit Protection Test Input Yellow: Power, Green: Output, Red: Margin (Emitter of thru-beam mode: Red LED),, / is Vs-(<=.5V); is approx. Vs is approx. ; is <=.5V 00 ma Light or dark switching selectable via switch ABS IP66 / NEMA Outputs short circuit and over current protected, Vs reverse polarity protected 0 V: light source off; VS or no connection: light source on (only for thru-beam mode) Time Options No delay, On delay, Off delay, One-shot (with timer mode only) Time Settings 0.... 5s Variable (with timer mode only) Ambient Operating Temperature Storage Temperature EMC Voltage With StandAbility Insulation Resistance Vibration Resistance Shock Resistance Weight Mounting Bracket Pigtail Type -5...55C o -0...70C o IEC 6097-5-, Parts 7..6... or RFI>V/m (in 80-000MHz), EFT>KV, ESD>KV(contact) IEC 6097-5-, Part 8... or 50DC for one min, between all supply terminals connected together and enclosure >0M Ω, with 50 DC megger between all supply terminals connected together and enclosure IEC 6097-5-, Part 7.. or 0-55HZ,.0mm amplitude in x, y and z directions for 0 min IEC 6097-5-, Part 7.. or 0g, ms in x, y and z directions for six time each Approx. 0 g MB-76 (optional) See our pigtail series or our Cables & Connectors catalogue Note: Used with RE-65 (supplied with sensor) reflector. P-5
Specifications(AC/DC) Item Sensing Mode Thru-beam Retrorefletive Diffuse Standard Diffuse (background suppression) Glass Fiber Optic (with polarizing filter) Sensing Range,Adjustable Angle of Divergence 8m 0m (Note) 800 mm 00 mm approx. o approx..7 o approx.. o approx..7 o Depends on fiber optic used Light Spot Size 50mm@0m 50mm@5m 5mm@800mm 7mm@00mm Light Source Response Time / Frequency Supply Voltage Power Consumption Infrared 880nm Red Light 660nm Infrared 880nm Infrared 880nm <0 ms /5 Hz - DC / -AC ( 0%) < VA Red Light 660nm Indicator LED Output Type Switching Voltage Max. Switching Current Max. Current Consumption(No load) Operation Mode Housing Material Enclosure Rating Circuit Protection Yellow: Power, Green: Output, Red: Margin (Emitter of thru-beam mode: Red LED) isolated (provide arc suppression for inductive / capacitive loads), SPSTSolid-state with either normally closed or normally open contact 0 VAC A < 0 ma Light or dark switching selectable via switch ABS IP66 / NEMA Output short circuit protected (only for -wire type), Vs reverse polarity protected Time Options No delay, On delay, Off delay, One-shot (with timer mode only) Time Settings Ambient Operating Temperature Storage Temperature Adjustable, 0...5 s -5...55C o -0...70C o (with timer mode only) EMC Voltage WithstandAbility Insulation Resistance Vibration Resistance Shock Resistance Mounting Bracket Weight IEC 6097-5-, Parts 7..6... or RFI>V/m(in 0-000MHz), EFT>KV, ESD>KV(contact) IEC 6097-5-, Part 8... or 50AC for one min, between all supply terminals connected together and enclosure >0M Ω, with 50AC megger between all supply terminals connected together and enclosure IEC 6097-5-, Part 7.. or 0-55HZ,.0mm amplitude in x, y and z directions for 0 min IEC 6097-5-, Part 7.. or 0g, ms in x, y and z directions for six time each MB-76 (optional) approx. 0 g Pig tail Type See Pigtail Series or our Cables & Connector catalogue Note: Used with RE-65 (supplied with sensor) reflector. P-6
Connection Diagrams Emitter of Thru-beam Mode (DC) DC 0- Euro-style White TI - test input. (+).White (Test input). (-).Not used output type output type DC 0- DC 0- Black load Black load Euro-style. (+).Not used. (-).Black (Output) /output type DC 0- White load Black load Euro-style. (+).White ( output). (-).Black (output) Emitter of Thru-beam Mode (AC/DC) L L - DC/ -AC Micro-style.Red/black(L).Red/white (L).Not used.not used Relay output (AC/DC) White L Black relay common L NO - DC/ -AC Micro-style.Red/black(L).Red/white (L).Red (relay common).green (N.O.) output (AC/DC) load L L P-7 - DC/ -AC Micro-style.Red/black(L).Red/white (L).Not used.not used
Timing Diagrams Typical ON/OFF Timing Diffuse (Light Operate) Nonretriggerable (only for new timing delay sensor) Target ON/OFF Timing: OFF Delay Timing: ON Delay Typical ON/OFF Timing Diffuse (Light Operate) Nonretriggerable (only for new timing delay sensor) Target T One-Shot T Delayed One-Shot T is adjusted via the T is adjusted via the OFF delay potentiometer with either a long(0-5sec) or short (0-.5sec) dip switch setting. ONdelay potentiometer with either a long(0-5sec) or short (0-.5sec) dip switch setting. P-8
Dimensions (Unit: mm) Sensor Type Terminal Type Quick Disconnect(0 or 90 o settled) 6 6 5 5 77.5 6 77.5 9.5 50 5.5 9.5 9.5 50 5.5 9.5 Quick Disconnect (Swivel 90 o ) 6 Pigtail* Type Ag: 5 M 50 77.5 5.5 9.5 swivel 90 o 6.5 Mx *: Please see Pigtail Series or our Cables & Connectors catalogue for more information. MB-76 (Mounting bracket-optional) Timer Mode Panel 0 0. 0 Power Output L.ON D.ON TIMER MODE O.S.D. OFF.D. ON.D. NORMAL. 0 5 7.5 Margin MIN MAX SENS. Terminal Type 0. 5S 0. S TIMER RP76 Series 0 6. 0.5 6 0. 0 8 6. P-9