January 23, 2017 Price List Table of Contents Ordering and Processing.... 2 Wall Washers..... 3 Wall Washer Style Options......... 4 Wall Washer Pricing....... 5 Decorative Cast Medallions 6 Back Plate Styles & Pricing....... 7 Appliqué Styles & Pricing...... 9 Shutter Hardware....... 14 Zimmerman Fasteners........ 15 Shutter Hinges......... 16 Parliament Hinges........ 17 Acme Hinges......... 18 Clarks Tip Blind Hinges...... 19 Shutter Holdbacks....... 20 Finishes.......... 23 Powder Coat Finishes........ 23 WINDY HILL FORGE THE CAST HOUSE www.windyhillforge.com www.thecasthouse.com 3824 Schroeder Ave Perry Hall, Maryland 21128 410-256-5890 windyhillforge@yahoo.com January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 1
ORDERING & PROCESSING Inquiries, Ordering and Billing You may inquire about pricing & product or directly place an order via email or phone with Ray Zeleny to windyhillforge@yahoo.com or 410-256-5890 When placing an order please include the following information: o product numbers & product name/ description o quantity of the items you are ordering o Contact Information: contact name, company/ organization name, phone number, email address, ship to address, and billing address if it is different than your shipto address. Unless otherwise requested, your invoice will be enclosed with your order; you have 30 days to pay the invoice. Large Quantity and Custom orders (including decorative medallions) will require 50-75% payment of the total in order to process the order. With the remaining balance due upon receipt of the order. The balance invoice will be enclosed with your product, unless otherwise specified. Inquire to determine if your order needs a deposit. Sales in Maryland are subject to 6% Maryland Sales Tax. Checks are made payable to: Windy Hill Forge Mail payment to: Windy Hill Forge 3824 Schroeder Ave Perry Hall, MD 21128 Shipping We ship UPS or USPS Large orders will be shipped in multiple boxes. Local order pick-up is available, please inquire for availability. Local shipped orders may result in lower shipping costs. WINDY HILL FORGE THE CAST HOUSE www.windyhillforge.com www.thecasthouse.com 3824 Schroeder Ave Perry Hall, Maryland 21128 410-256-5890 windyhillforge@yahoo.com January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 2
WALL WASHERS Wall Washers, also known as: Wall Anchors, Brick Anchors, Tie Plates, Iron Tie-rod Plates, Earthquake Bolts, Pattress Plates, or Gib Plates. Structural and Decorative use: The exterior washers, along with a bolt or tie-rod system, will tie a building together to keep masonry walls from bulging and spreading over time, this movement can lead to structural damage and ultimately collapse. Our structural castings are made with Grey Iron according to the ASTM A48/A48M Grey Iron castings specifications. For the complete ASTM standards visit: http://www.astm.org/standards/a48.htm These wall washer castings are made from historically authentic and original patterns. Current wall washer applications may include structural reinforcement in new construction, historic buildings renovation & restoration, retaining walls, and applied as decorative elements. For additional decorative (non-structural) applications see our Decorative Cast Medallion options. Order Notes: Finishes: Iron Castings are Painted Black (standard) Other finishes available upon request include: Unpainted (no additional charge), and Powder Coating (additional charge inquire for pricing, variety of colors and sheens available, please specify) Wall Washers are standard with a ¾ hole; a 1 hole is available upon request only, with no additional charge. Wall Washers are also available in cast Brass, Bronze, and Aluminum - inquire for pricing. Shipping pricing: All items ship Ground UPS to the continental United States. Inquire for international shipping rates. Local pick is up available, please call to arrange for pick up. Metal goods and Shipping pricing are subject to change according to market increases. January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 3
Cast Iron Wall Washers Diamond Washers: #01-SD: Small Diamond #02-LD: Large Diamond #03-JD: Jumbo Diamond Star Washers: #04-SS: Small Star #05-MS: Medium Star #06-LS: Large Star #07-JS: Jumbo Star Round Washers: #08-SF: Sunflower #09-SR: Small Round #10-MR: Medium Round #11-LR: Large Round Oval Washers: #12-SO: Small Oval #13-MO: Medium Oval #14-LO: Large Oval #15-FW: Flat Washer Back Plate Acorn Cupling Nut Stainless Nut All Thread January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 4
Cast Iron Wall Washers Price List Code Item Description Size Price SD Small Diamond: Cast Iron, with ¾" center hole 11" x 6" LD Large Diamond: Cast Iron, with ¾" center hole 14" x 7" JD Jumbo Diamond: Cast Iron, with ¾" center hole 18" x 12" SS Small Star: Cast Iron, with ¾" center hole 9" MS Medium Star: Cast Iron, with ¾" center hole 11½" LS Large Star: Cast Iron, with ¾" center hole 12½" JS Jumbo Star: Cast Iron, with ¾" center hole 18" SF Sunflower: Cast Iron, with ¾" center hole 7" SR Small Round Washer: Cast Iron, with ¾" center hole 6" MR Medium Round Washer: Cast Iron, with ¾" center hole 10" LR Large Round Washer: Cast Iron, with ¾" center hole 16" SO Small Oval Washer: Cast Iron, with ¾" center hole 9 ½" x 7 ½" MO Medium Oval Washer: Cast Iron, with ¾" center hole 11 ¼" x 9" LO Large Oval Washer: Cast Iron, with ¾" center hole 14" x 11" FW NUTS ALL THREAD Flat Washer Back Plate: 4" Square, 3/16" thick, with ¾" center hole (use as a back plate for securing wall tie installations) $65.00 + S&H: $10.00 $71.00 + S&H: $12.00 $164.00 + S&H: $23.00 $67.00 + S&H: $10.00 $71.00 + S&H: $12.00 $75.00 + S&H: $12.00 $164.00 + S&H: $23.00 $65.00 + S&H: $10.00 $65.00 + S&H: $10.00 $75.00 + S&H: $12.00 $164.00 + S&H: $23.00 $67.00 + S&H: $11.00 $75.00 + S&H: $12.00 $164.00 + S&H: $23.00 4" x 4" $8.00** Steel Nut: 10 thread 3/4" $0.80 ea** Stainless Nut: 10 thread 3/4" $2.20 ea** Acorn Nut: 10 thread 3/4" $3.60 ea** Cupling: 2 ¼", 10 thread 3/4" $2.45 ea** All thread: ¾ 10 thread 3 $16.00*** All thread: ¾ 10 thread 6 $ 32.00*** Notes: Finishes: Iron Castings are Painted Black (standard) Other finishes available upon request include: Unpainted (no additional charge), and Powder Coating (additional charge inquire for pricing, variety of colors and sheens available, please specify) Wall Washers are standard with a ¾ hole; a 1 hole is available upon request only, with no additional charge. Wall Washers are also available in cast Brass, Bronze, and Aluminum - inquire for pricing. Shipping pricing: All items ship Ground UPS to the continental United States. Inquire for international shipping rates. Local pick is up available, please call to arrange for pick up. **No additional S&H when shipped with washer order *** All Thread is available for pick up only. Metal goods and Shipping pricing are subject to change according to market increases. January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 5
DECORATIVE CAST MEDALLIONS (non-structural) Decorative Use: Our Decorative Cast Medallions can be used both indoors and outdoors. They add architectural interest to buildings, walls, gardens, fixtures, and furniture. These decorative medallions can add character, symbolism, personalization, and even company branding. Decorative Cast Medallions are not structural and thus are for decorative use only. Unlike our Wall Washers they are cast in aluminum are applied to the wall with 2 2 x 3/8 studs (which are included) and epoxy (not provided). These medallions are ordered as Back-plate and Appliqué and are then custom cast in one piece with the mounting studs added. As these are a custom product, payment of 50% - 75% of the total order will be required prior to processing the order. The medallions are painted a flat black as a standard finish. Other finishes are available, including powder coating, inquire for pricing. Note: These medallions are non-structural and are for decorative application only. Medallions are cast in aluminum. Back plates can be purchased without the additional appliqué, these can have any size predrilled center mounting hole up to 1 (3/4 is shown in photographs) or no center hole and 2-3/8 studs added to the back for mounting. These medallions are ordered as Back-plate and Appliqué and are then custom cast in one piece with the mounting studs added. As these are a custom product, payment of 50% - 75% of the total order will be required prior to processing the order. Brass and Bronze castings are available, inquire for pricing. Powder Coating is optional, please inquire for additional estimate and specify color and finish. Metal goods and Shipping pricing are subject to change according to market increases. January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 6
Product Code Decorative Medallions Back Plate Options Photo Item Description Price A Small Round Back Plate 5 ¾" Round x ¾"depth, Lipped edge, Flat interior Compatible Appliqués: R1, R2, R3, R7, F2, F5, A6 (tight), D2 $68.00 B Medium Round Back Plate 10" Round x 7/8 depth, Lipped edge, Flat interior Compatible Appliqués: R1, R2, R3, R4, R5, R6, R7, R8, F1, F2, F3, F4, F5, A1, A2, A3, A4, A5, A6, A7, A8, V1, V2, S6, $128.00 C CL Portrait (Standard) Landscape (Specify as CL ) Small Oval Back Plate 9 3/8" x 7 1/8 x ¾"depth Cameo Style with a lipped edge and convex interior Compatible Appliqués: R1, R2, R3, R5, R6, R7, F2, F5, A4, A7, V1, V2, D2 Small Oval Back Plate 9 3/8" x 7 1/8 x ¾"depth Cameo Style with a lipped edge and convex interior Compatible Appliqués: F5, A7, D2 Note: the appliqué will be positioned perpendicular to the back plate. Some designs listed for the C back plate could be hung horizontally $68.00 D Medium Oval Back Plate 11 ¼" x 9" x 7/8 depth Cameo Style with a lipped edge and convex interior Compatible Appliqués: R1, R2, R3, R4, R5, R6, R7, R8, R9, F1, F2, F3, F4, F5, A1, A2, A4, A5, A6, A7, A8, V1, V2, S6, D1, D2 Portrait (Standard) $128.00 Medium Oval Back Plate 11 ¼" x 9" x 7/8 depth Cameo Style with a lipped edge and convex interior DL Landscape (Specify as DL ) Compatible Appliqués: A1, A4, A3, A5, A6, A7, A8, F5, V1, V2, S6, D1, D2 Note: the appliqué will be positioned perpendicular to the back plate. Some designs listed on the D back plate could be hung horizontally January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 7
E EL Portrait (Standard) Landscape (Specify L ) Small Diamond Back Plate 11 ½" x 5" x 5/8 depth Lipped edge, Flat interior Compatible Appliqués: R2, R3, R5, R6, R7, F2, F5, V2, D2 Small Diamond Back Plate 11 ½" x 5" x 5/8 depth Lipped edge, Flat interior Compatible Appliqués: F5, D2 Note: the appliqué will be positioned perpendicular to the back plate. Some designs listed for the E back plate could be hung horizontal $68.00 F FL Portrait (Standard) Landscape (Specify L ) Medium Diamond Back Plate 14 ½ x 7 ½ x ¾ depth Concave lipped edge, Flat interior (see image) Compatible Appliqués: R1, R2, R3, R4, R5, R6, R7, R8, R9, F1, F2, F4, F5, A4, A5, A6, A7, A8, V1, V2, S6, D1, D2 Medium Diamond Back Plate 14 ½ x 7 ½ x ¾ depth Concave lipped edge, Flat interior Compatible Appliqués: A1, A3, A4, A5, A6, A7, A8, F5, V1, V2. S6, D1, D2 Note: the appliqué will be positioned perpendicular to the back plate. Some designs listed on the D back plate could be hung horizontally Shipping & Handling $128.00 Total + 20% Note: These medallions are non-structural and are for decorative application only. Medallions are cast in aluminum. Back plates can be purchased without the additional appliqué, these can have any size pre-drilled center mounting hole up to 1 (3/4 is shown in photographs) or no center hole and 2-3/8 studs added to the back for mounting. Note medallion castings will be slightly smaller than the measurements shown due to cast pattern shrinkage. Medallions are ordered as Back-plate and Appliqué and are then custom cast in one piece with the mounting studs added. As these are a custom product, payment of 50% - 75% of the total order will be required prior to processing the order. Brass and Bronze castings are available, inquire for pricing. Powder Coating is optional, please inquire for additional estimate and specify color and finish. Metal goods and Shipping pricing are subject to change according to market increases. January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 8
Product No. Rosettes and Flowers R1 Decorative Medallions Appliqué Options Item Description Dogwood Rosette: Four-petal round rosette Size height x width x projection Price 4 ¼ x 4 ¼ x 5/8 $47.00 R2 Wild Rose Rosette: Eight-petal round rosette with center bead 4 x 4 x ½ $47.00 R3 Cottage Rose Rosette: Eight-petal round rosette 3 ½ x 3 ½ x 3/8 $47.00 Large Peony Rosette: Oblong rosette R4 6 ¼" x 9 ¼ x 7/8 $137.00 R5 Acanthus Spear Rosette: Symmetrical oblong rosette with center bead 2 5/8 x 6 ½ x ½ $47.00 R6 Daylily Rosette: Four petal oblong rosette 4 x 6 ½ x 3/8 $47.00 R7 Small Square Rosette 2 ¼ x 2 ¼ x 3/8 $47.00 Large Sunflower Rosette: Round rosette R8 6 round x 3/8 $137.00 Leaves and Flowers Rosette: oblong rosette with flower center and acanthus leaf points. R9 10 x 4 x 3/8 $67.00 January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 9
Fleur-de-lis Medium Fleur-de-lis F1 6 ¾ x 5 ¼ x 1 $82.00 Small Fleur-de-lis F2 4 3/8 x 3 ½ x ½ $47.00 F3 Plump Fleur-de-lis with full and round upper plumage. 8 ¾ x 7 ½ x ¾ $137.00 F4 Spear Fleur-de-lis: narrow plumage with spear top and bottom 7 ¼ x 4 ¼ x 5/8 $82.00 F5 Modern Fleur-de-lis: rounded plumage 4 x3 x 1 $47.00 Animal: Animals, Insects, etc. A1 Lion Head 7 x 6 ½ x 3 ½ $137.00 A2 Lion Head with Open Mouth 8 x 6 x 2 ½ $137.00 A3 Lion full body laying 3 5/8 x 6 ½ x ¾ $82.00 January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 10
Dog Head A4 5 x 5" x 3 $137.00 Eagle on branch A5 4 ½ x 5 x 3/8 $82.00 Eagle Crest A6 4 x 4 ¾ x 3/8 $47.00 Lion Head Curly Mane A7 5 ½ x 4 x 3 $137.00 Rooster A8 5 x 5 x 3/8 $82.00 Vegetation: Fruits, Vegetables, Leaves and Foliage V1 Pineapple with lower leaves 5 3/4 x 3 x 1 ¼ $82.00 V2 Pineapple Rounded 5 3/4 x 3 x 1 ½ $82.00 January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 11
Stars S1 S2 S3 S4 S1 Star # 1 (See photo above) 8 x ½ $82.00 S2 Star # 2 (See photo above) 6 ¾ x ½ $82.00 S3 Star # 3 (See photo above) 4 ½ x 3/8 $82.00 S4 Star # 4 (See photo above) 3 x ¼ $82.00 Star # 5 Raised Star S5 5 ¾ x 7/8 $82.00 North Star S6 7 x 4 x ½ $82.00 Designs: Motifs, Patterns, Objects Scrolls (shells, crests, boat) Urn Plaque D1 7 x 4 x ½ $137.00 D2 Shell 2 ½ x 2 3/8 x 3/8 $47.00 Additional patterns available, please inquire January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 12
Custom Design: Letter, Logo, Special Image or Custom Design Custom options available, please inquire Monogram Example: Custom Monogram S on Medium for SilverSpring Mining Company Restaurant Hostess Stand. Notes: The Decorative Medallions are cast as one piece in Aluminum. Finishes: Aluminum Castings are Painted Black (standard) Other finishes available upon request include: Unpainted (no additional charge) Powder Coating (additional charge inquire for pricing, variety of colors and sheens available, please specify) Note medallion castings will be slightly smaller than the measurements shown due to cast pattern shrinkage. Wall Medallions are also available in cast Brass and Bronze please inquire for pricing. Shipping pricing: All items ship Ground UPS to the continental United States; inquire for international shipping rates. Local pick up available. Metal goods and Shipping pricing subject to change according to market increases. January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 13
SHUTTER HARDWARE Zimmerman Fasteners Hinges: Parliament Hinges Acme Hinges Clarks Tip Blind Hinges Shutter Hold Backs January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 14
ZIMMERMAN FASTENERS Zimmerman Fasteners were primarily used in larger homes, built throughout the 1860's to the 1930's, with working shutters. These shutter systems were specifically used to controlling air flow and light with the ease of opening and closing shutters from the inside and offering a multiple of locked positions. Four Hole One Hole Zimmerman Fastener Sets: Product & Price List No. Item Description Price #21ZR Zimmerman Fastener, Right only, 5 piece Set, includes 8 mounting screws and instructions for assembly, (For One Shutter) $52.00 #21ZL Zimmerman Fastener, Left only, 5 piece Set, includes 8 mounting screws and instructions for assembly, (For One Shutter) $52.00 Zimmerman Fastener Replacement Parts: Product & Price List #22ZCR Zimmerman Fastener Cradle, see photo $13.00 #22ZBR Zimmerman Fastener Bracket, see photo $17.00 #22ZAR Zimmerman Fastener Arm, Right, see photo $20.00 #22ZAL Zimmerman Fastener, Arm Left, see photo $20.00 #22ZOH Zimmerman Fastener, One Hole, see photo $8.00 #22ZFH Zimmerman Fastener, Four Hole, see photo $14.00 Notes: Add 20% of the total order for Shipping & Handling. No Minimum Quantity. All pieces are sold with a Primer finish Bracket, one hole, four hole and cradle are cast aluminum; the arm is iron. January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 15
SHUTTER HINGES Shutter hinges are unique in that, not only does the mechanism need to open 180º but also needs to lock and lift off, for ease of installation, maintenance, window protection, and ventilation. We offer the following hinges: Parliament Hinges Acme Hinges Clarks Tip Blind Hinges January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 16
PARLIAMENT HINGES Parliament Hinge Product & Price List Product Code Item Description Price Photo PARL Made to Order Parliament Hinge. Please specify Size and Whether Right or Left Available: 2"-4" Height and 2"-6" Open Width. Priced Each. $26.00 HPARL Made to Order "H" Parliament Hinge with. Please specify Size and Whether Right or Left when ordering. See standard size drawing below. Custom sizing available, hinge can be altered to suit your needs. Priced Each. $34.00 We can Match Samples of Existing Parliament Hinges and create custom hinges to meet your specifications. Shipping & Handling Add 20% of the total order No Minimum Quantity. Parliament Hinge Drawing: January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 17
ACME HINGES The patented Acme, Lull & Porter hinge is used in applications when enough wood trim is exposed within the window opening to mount the shutters. One side of the hinge is mortised into the edge of the shutter and the other side is mortised into the window casement. When using Acme Lull & Porter mortised hinges, choose a hinge that gives you the best clearance away from the window casement. Be sure to allow adequate clearance from the surface of the house for ventilating purposes. Acme Lull & Porter Shutter Hinge Price List Size No. Item Description Price Photos #318-ARL Acme Lull & Porter Shutter Hinge, 3-1/8" when open; 1-3/8" throw from casting. Right and Left. Minimum sold is one set; Set is One Left and One Right. $32.00 #334-ARL #412-ARL #500-ARL #512-ARL #612-ARL #900-ARL Acme Lull & Porter Shutter Hinge, 3-3/4" when open; 2" throw from casting. Right and Left. Minimum sold is one set; Set is One Left and One Right. Acme Lull & Porter Shutter Hinge, 4-1/2" when open; 2-3/4" throw from casting. Right and Left. Minimum sold is one set; Set is One Left and One Right. Acme Lull & Porter Shutter Hinge,5" when open; 3-1/8" throw from casting. Right and Left. Minimum sold is one set; Set is One Left and One Right. Acme Lull & Porter Shutter Hinge, 5-1/2" when open; 3-5/8" throw from casting. Right and Left. Minimum sold is one set; Set is One Left and One Right. Acme Lull & Porter Shutter Hinge, 6-1/2" when open; 4-1/4" throw from casting. Right and Left. Minimum sold is one set; Set is One Left and One Right. Acme Lull & Porter Shutter Hinge, 9" when open; 6-1/4" throw from casting. Right and Left. Minimum sold is one set; Set is One Left and One Right. $32.00 $34.00 $34.00 $40.00 $44.00 $48.00 #951-SF Three Part Shutter Fasteners, Cast Iron. Priced as each. $10.00 Note: Shipping & Handling Add 20% of the total order Hinges do not include mounting screws. Hinges sold as set of One Right and One Left, Fastener are sold individually. No Minimum Quantity. January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 18
CLARKS TIP BLIND SHUTTER HINGES Clark's Tip Blind Shutter Hinge Price List Size No. Item Description Price Photo (not to scale) #114-CRL Designed for surface mounting. Clark's Tip Blind Shutter Hinge 1-1/4" throw from casting. Right and Left. Minimum sold is one set; Set is One Left and One Right. $24.00 #314-CRL Designed for surface mounting. Clark's Tip Blind Shutter Hinge 3-1/4" throw from casting., Right and Left. Minimum sold is one set; Set is One Left and One Right. $28.00 #951-SF Three Part Shutter Fasteners, Cast Iron. Priced as each. $10.00 Note: Hinges do not include mounting screws. Shipping & Handling Add 20% of the total order. Hinges sold as set of One Right and One Left - Fastener are sold individually. January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 19
SHUTTER HOLDBACKS Known as Shutter Holdbacks, Shutter Dogs, Shutter Tie Backs, their purpose is the same, to keep the shutter back against the wall, while open. Cast from antique holdback patterns in rust proof Aluminum or Bronze. For the History of Shutters visit: http://www.allaboutshutters.com/shutter-history.htm Cast Shutter Holdbacks Product & Price List No. Item Description Metal Price Orientation Sketch #01FSAL #01FSAR #01FSBL Federal Shell Federal Shell Federal Shell Federal Shell $20.00 $20.00 call for pricing call for pricing L L Fluted Paddle, left & right Fluted Paddle, left & right call for pricing Paddle, left & right Paddle, left & right call for pricing Propeller, left & right Propeller, left & right call for pricing January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 20
Scroll, Reversible, left & right Scroll, Reversible, left & right call for pricing Offset, Reversible, left & right Offset, Reversible, left & right call for pricing R or L #7STAL $22.00 L $22.00 #7STBL Bronze call for pricing L #7STBR Bronze call for pricing Plume #8PLAR Plume $22.00 #8PLBL Plume call for pricing L #8PLBR Plume call for pricing Base, for mounting Shutter Hold Backs with frame construction. Plate comes with screws for mounting directly to wood siding, see photo Aluminum call for pricing Note: Each holdback comes with mounting bolt: 4" (5/16") Lag bolt, Cotter Pin No minimum quantity required. All aluminum castings are primed; bronze are unpainted. Shipping & Handling Add 20% of the total order January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 21
FINISHES: POWDER COATING Call for quote January 2016 Price List WINDY HILL FORGE THE CAST HOUSE thecasthouse.com 22