LevelOne. User Manual KVM-0811 / KVM /16-Port PS2 KVM Switch

Similar documents
SMK520 / SMK580 / SMK590 RACK MOUNTABLE 1 / 8 / 16 PORT PS2 KVM SWITCH USER S MANUAL

SMK525 / SMK585 / SMK595

TABLE OF CONTENTS Chapter 1 Introduction... 3 Chapter 2 Installation... 7 Chapter 3 Operation... 15

4 / 8 / 16 PORT PS2 KVM SWITCH USER S MANUAL

SYNERGY GLOBAL INC. Toll Free : Fax :

User s Manual 2005 All Right Reserved

User s manual 19 1U RACKMOUNT CONTROL CENTER. Rack-KVM in-1 TABLE OF CONTENTS INTRODUCTION... (KVM switch, Keyboard, LCD display, touch pad)

SMK585 1U rackmount. With 8 Ports KVM Switch

Your Rackmount Display Solution. 1U Keyboard / Monitor + 8 / 16 Ports. BHK Black Hawk Series USER S MANUAL. Ver.1

TWO-CONSOLE (One Local, One CAT5 Remote) 8 port / 16 port 19 RACK MOUNTABLE PS/2 KVM SWITCH USER S MANUAL

INTRODUCTION...1 FEATURES...1 PACKAGE CONTENTS... 1 TECHNICAL SPECIFICATIONS...2 SYSTEM REQUIREMENT..3 CABLE DIAGRAMS.3 PRODUCT DETAILS 4

KVM I KVM I KVM-1160 USER'S MANUAL

LevelOne. User Manual KVM-0831/KVM /16-Port Combo KVM Switch w/ Expansion Slot. Ver

Sylphit-Duo DSK-Series. KVM Drawer (with integrated KVM switch)

1+1 Console 8/16/32 ports Modularize CAT-5 KVM Switch (Console Free)

Venus Series Stand Alone & Modular Combo-free KVM Switch User Manual

8 / 16 port combo KVM Switch 1+1 Console 8 / 16 port combo KVM Switch User Manual

8/16-Port Enterprise KVM Switch

User Manual. CV-401 / 801 / U Rackmount PS/2 KVM Switch

8/16-port PS2 KVM Switch User Manual

ComboCAT Port KVM Switch. User Guide. Rev 0.9

CE-1000M CAT5 Module User Manual

Toll Free : Tel : Fax :

Toll Free: Tel: Fax:

1. BRIEF INTRODUCTION...

KVM-U4 & KVM-U8. Users Guide. 8 Port VGA KVM Switch. 4 Port VGA KVM Switch CUSTOMER SUPPORT INFORMATION

KVM-0850/1650 IP KVM switch. LevelOne KVM-0850/ /16-port IP KVM Switch for PS/2. User Manual. Ver

KVM08KD. KVM Switch with Keyboard Mouse Build In

Installation A B. Install each bracket using screws provided shown in Figure 1. Fix the KVM into the rack

8/16/32 Ports CAT5 LCD KVM

8-Port / 16-Port KVM SWITCH User s Manual

8/16-Port Combo KVM Switch KVM /KVM

8 ports/16 ports USB/PS/2 Combo-KVM Switch

Installation A B. Install each bracket using screws provided shown in Figure 1. Fix the KVM into the rack

(DS / DS-14202)

CAT.5 COMBO-KVM SWITCH 8-PORT/16-PORT

Table of Contents. Cascade Configuration

Installation A B. Install each bracket using screws provided shown in Figure 1. Fix the KVM into the rack

Installation A B. Install each bracket using screws provided shown in Figure 1. Fix the KVM into the rack

1RU 17.3 LCD Console Drawer with Integrated DVI KVM Switch - 8 Port User Manual

IC-1504 / IC-1508 / IC-1516

Rack Mount CAT5 KVM Switch (8Port/16 Port/32 Port) User Manual

Limited Warranty. All brand names and registered trademarks are the property of their respective owners.

CyberView User Manual

Table of Content Introduction System Requirements Installations Operations Appendices Troubleshooting Other PS/2 KVM Switch Installation

Dual User 16 Port 1U Rackmount PS/2 KVM Switch with OSD

Rack Dual Rail KVM Console (8 Ports /16 Ports) User Manual

Table of Contents OVERVIEW 2 FEATURES 2 PACKAGE CONTENTS 3 SYSTEM REQUIREMENTS 3 INSTALLATION 4 OPERATION 6 RACK-MOUNT ACCESSORIES 7

User Manual. VGA KVM Switch, PS2 and USB. GCS1722/GCS1724 PART NO. M1258 / M

Daisy Chain KVM Console KVM-17CZ User Manual

NETWORK CONNECTIVITY SYSTEMS

Table of Contents. ServerLink Eco KVM Rack Drawer. Overview... 1 Features... 2 Configurations... 3 Front Panel Control... 5

8-Port / 16-Port Rackmount user manual Models &

Table of Contents. Integra KVM Switch Modules

Table of Content Introduction Installations Operations Appendices Troubleshooting Installation

8 Port Rackmount USB VGA KVM Switch w/ Audio (Audio Cables Included) StarTech ID: SV831DUSBAU

User's Manual. LCD KVM Console Rack Drawer. RoHS

User Manual. Rack Dual Rail CAT5 LCD KVM Console (8 Port /16 Port/24 Port /32 Port) User Manual

CL Port PS/2-USB VGA Dual Rail LCD KVM Switch with Daisy-Chain Port and USB Peripheral Support

UKV-048OSD/088OSD/0168OSD 4-/8-/16-PORT RACKMOUNT KEYBOARD-VIDEO-MOUSE SWITCH

Rack Mount LCD KVM Assembly. Installer/User Guide

DVI KVM Switch user manual Model

USB VGA KVM Console Extender w/ Serial & Audio Over Cat5 UTP ft

Keyboard/Mouse/Monitor SharingSwitch. User's Manual SV431 SV831 SV431D SV831D SV1631D SV832DS SV1632DS

RACKMOUNT CONSOLE KVM SWITCH USER MANUAL

LCD CONSOLE KVM-15C08/KVM-15C16. User Manual

User Manual. LCD1U15-06 / LCD1U KVM / 16KVM 1U LCD Keyboard Drawer. with PS/2 KVM Switch

USER MANUAL. NVP1015 / 1017 S801/S1601 1U 15 / 17 Rackmount LCD. Keyboard Drawer with USB KVM Switch

CL5708M. 8-Port 17in. Slideaway LCD KVM Switch

1U Rack LCD Drawer LDS Series

User Manual - KVM Rear Kit Version

KSR Series Single Rail LCD Console with PS/2 KVM Switch User Manual

CL Port PS/2-USB VGA LCD KVM Switch with Daisy-Chain Port and USB Peripheral Support

Keyboard/Mouse/Monitor SharingSwitch. User's Manual SV231

2-Port / 4-Port COMBO FREE (USB&PS/2)

dedicated KVM switch and rackmount screen technology User Manual CV-801 PS/2 DB-15 KVM Designed and manufactured by Austin Hughes

Dual Rail AS-7100 & AS-9100 series LCD KVM User Manual

Introduction. Table of Content. Overview. Automatic Mouse Conversion. Introduction

4 Port KVM Switch. If anything is damaged or missing, contact your dealer.

BHK117Ue/BHK119Ue User Reference Manual l-tech COMPANY

4-Port HDMI KVM Switch - USB p

17" 8-Port Combo VGA LCD KVM Switch

4 Port DVI VGA Dual Monitor KVM Switch USB with Audio & USB 2.0 Hub

4PortKeyboard/Mouse/Monitor SharingSwitchUSB-PS/2. User'sManual SV431H

LCD/Keyboard/Mouse All In one User's manual

WL-21701/21708/21716 User Reference Manual. Revision 1.3 (080717)

CL Port PS/2-USB VGA LCD KVM Switch with Daisy-Chain Port and USB Peripheral Support

Rackmount your KVM switch. 4 Port DVI VGA Dual Monitor KVM Switch USB with Audio & USB 2.0 Hub. StarTech ID: SV431DDVDUA

SMK 920/980/990 (P) User Reference Manual

Table of Content Introduction. Overview. Introduction

DVI Desktop 4-Port Audio-Combo-KVM Switch

Table of Contents. Introduction Introduction. Overview. Introduction. One-Console KVM Switches. Two-Console KVM Switches

User Manual CL

KSR Series. Single Rail LCD Console with Combo-free KVM Switch User Manual. Rev 1.0

User Manual. Combo DB-15 2-console KVM. Combo DB-15 2-console KVM. Combo DB-15 KVM. dedicated KVM switch and rackmount screen technology

alt option esc Ctrl Internet Remote Client Local Client Computer Switching OSD

CS1716i. 1-Local/Remote Share Access 16-Port PS/2-USB VGA KVM over IP Switch

Technology Corporation. ADDERLINK X SERIES X2-MultiScreen

KH1508Ai. 1-Local/Remote Share Access 8-Port Cat 5 KVM over IP Switch with Daisy-Chain Port

AdderView OSD - AV8OSD SmartViewPro - SVPro 8

Transcription:

LevelOne KVM-0811 / KVM-1611 8/16-Port PS2 KVM Switch User Manual

Table of Contents 1. INTRODUCTION...1 FEATURES...1 PACKAGE CONTENT...2 SYSTEM REQUIREMENTS...2 TECHNICAL SPECIFICATIONS...3 FRONT PANEL...4 REAR PANEL...4 CABLE DIAGRAMS...5 2. HARDWARE INSTALLATION...6 STEP 1 RACK MOUNTING...6 STEP 2 LOCAL CONSOLE...6 STEP 3 PS2 KEYBOARD...7 STEP 4 PS2 MOUSE...7 STEP 5 PC PORT CONNECTION...7 STEP 6 PC PORT - MOUSE...8 STEP 7 PC PORT - KEYBOARD...8 STEP 8 DOUBLE CHECK...8 STEP 9 REPEAT STEP 5 TO 7...9 STEP 10 POWER ON...9 3. OPERATION...10 PUSH BUTTONS...10 PC PORT LED INDICATION...10 7-SEGMENT BANK LED INDICATION...10 RESET BUTTON...11 KEYBOARD HOT KEY COMMANDS...11 4. DAISY CHAIN CONNECTION...14 5. HOT PLUG...15 6. ON SCREEN DISPLAY...16 7. TROUBLESHOOTING...19

1. Introduction Control multiple PCs from One Keyboard, Mouse and VGA Monitor. KVM switch is loaded with features such as 19 Rack Mount Size, Daisy Chain up to eight units, On Screen Display Manual, Password security, searching PC server name, Hot key Control, Push Button and Auto Scan Control. It has complete keyboard and mouse emulation for simultaneous PCs boot-up process. Features 8/16 port KVM switch is 19 rack mount size design. Support Microsoft Intellimouse, Microsoft Intellimouse Explorer, Logitech Net Mouse or the other fully compatible MS mouse. Support DOS, Win3.X, Win/98SE/2000/ME/XP, WinNT, Netware, Unix, Linux Hot Plug - Add PCs or Remove Connected PCs for Maintenance without Powering Down the KVM switch or PCs. Very High Video Quality - Up To 1920X1440, Bandwidth: 200MHz No Software Required - easy PC selection via On Screen Display Manual, Push Buttons, Hot Keys Support eight characters password protection and search PC server name Auto Scan Mode for monitoring PCs and flexible Scan time from 5~99 seconds Keyboard status restored when switching PCs LED Display for easy status monitoring Buzzer sound for switching port confirmation. Built-in one extra daisy chain port and no waste any PC port No DIP switch setting needed and auto detect daisy chain bank 1

Package Content KVM-0811: 8-Port PS2 KVM Switch 8 port PS2 KVM Switch 1 PCS AC to DC Power Adapter 1 PCS Rack Mount Kit 1 SET User Manual 1 PCS KVM-1611: 16-Port PS2 KVM Switch 16 port PS2 KVM Switch 1 PCS AC to DC Power Adapter 1 PCS Rack Mount Kit 1 SET User Manual 1 PCS System Requirements KVM-0811 Console side Computer side 8-Port PS2 KVM Switch One VGA Monitor One PS/2 Keyboard One PS/2 Mouse 8 HDDB 15 pin male to one HDDB 15 pin and Mini Din 6 pin special cables KVM-1611 Console side Computer side 16-Port PS2 KVM Switch One VGA Monitor One PS/2 Keyboard One PS/2 Mouse 16 HDDB 15 pin male to one HDDB 15 pin and Mini Din 6 pin special cables 2

Technical Specifications Model No. KVM-0811 KVM-1611 PC Port 8 16 Console Port 1 1 PC Port Connector (All Female Type) Console Port Connector (All Female Type) Daisy Chain Port Connector (All Female Type) PC selection VGA HDDB 15pin ( shared with PS2 keyboard and Mouse ) PS/2 Keyboard Mini Din 6 pin PS/2 Mouse Mini Din 6 pin VGA HDDB 15pin PS/2 Keyboard mini Din 6 pin PS/2 Mouse Mini Din 6 pin VGA HDDB 15pin On Screen Display Manual, Hot Key, Push Button PC Port LED 8 16 Bank 7 segment LED 1 On Screen Display Scan Intervals Keyboard Emulation Mouse Emulation VGA Resolution Bandwidth Daisy Chain MAX Level Yes 5~99 Sec. PS2 PS2 1920X1440 200MHz 8 levels MAX PC Connection 120 128 Housing Power Adapter Operation Temp. Storage Temp. Humidity Metal DC 12V 1A or DC 9V 1A 0~50 C -20 ~ 60 C 0~80%, Non-Condensing Size 19 Rack Mount / 1RU 19 Rack Mount/ 1RU Weight (kg) 2.2kg 3.5kg Dimension (mm) 445(L) X 160(W) X 45(H) 445(L) X 160(W) X 45(H) 3

Front Panel KVM-0811 KVM-1611 Rear Panel KVM-0811 KVM-1611 4

Cable Diagrams PC Port Special Cable: (ACC-2001, ACC-2002) HDB15 pin male to one HDDB 15 pin and Mini Din 6 pin special cables ------------ AT to PS/2 keyboard adapter: (Optional) Din 5 pin Male to Mini Din 6 pin Female Daisy Chain Cable: (ACC-2009) PS/2 Cable: Mini Din 6 pin Male to Male, VGA Cable: HDB15 pin Male to Male 5

2. Hardware Installation Before installation, please make sure all of peripherals and computers have been turned off. This example of installation is based on 8 port Rack Mount KVM Switch and you also can think that 4 port Rack Mount KVM Switch and 16 port Rack Mount KVM Switch have the same installation procedure. Step 1 Rack Mounting Find a convenient place to put your KVM Switch. Its 19 rack mount form factor makes it ideal mountable on 19 rack. When mounting to a rack, attach the included brackets to the sides of the KVM Switch. Take note of the length of your cables so that your computers, KVM Switch, keyboard, mouse and monitor are distanced properly. Step 2 Local Console Connect the monitor to the KVM Switch. Using the attached cable, or the one included with your monitor, connect it to the HD DB-15 female port on the back of the KVM unit labeled with the monitor symbol at the CONSOLE connector. 6

Step 3 PS2 Keyboard Connect the keyboard to the KVM Switch. If you have an AT type keyboard, you will need an AT to PS/2 adapter. Step 4 PS2 Mouse Connect the mouse to the KVM Switch. Step 5 PC Port Connection Now the PC connections will be made with the monitor (VGA) connections first. Connect a VGA cable (15-pin HDDB Male / Male) with the Male side to both of the PC and the rear panel of the KVM switch to the connector labeled VGA. Repeat this for all PCs. 7

Step 6 PC Port - Mouse Connect the first computer s mouse cable to the KVM Switch. If using a PS/2 cable, connect one end to the PS/2 mouse port on the computer, and the other end to the PC1 PS/2 mouse port on the back of KVM Switch. If using a serial mouse cable (optional), connect one end to a DB-9 serial port on the computer, and the other end to the PC1 DB-9 serial mouse port on the back of the KVM Switch. If you need Serial DB-9 to PS2 Mini Din 6 pin adapter, please contact your supplier. Step 7 PC Port - Keyboard Connect the first computer s keyboard cable to the KVM Switch. Using another PS/2 cable connect one end to PS/2 keyboard port on the computer, and the other end to the PC1 keyboard port on the back of KVM unit. If your computer has an AT type keyboard port, you will need a PS/2 to AT keyboard adapter. Step 8 Double Check Double-check all of the connections. You can check the color of keyboard and mouse connector to make sure the keyboard and mouse cables go to the correct ports. 8

Step 9 Repeat Step 5 to 7 Repeat step 5 to 7 for the remainder of the computers. Step 10 Power On Attach the power supply to the KVM unit and plug the other end into an electrical receptacle. Now you will see the LED for Port 1 light up, and you will hear a beep. Switch on your monitor. 9

3. Operation The power on state of 8/16 port KVM switch: When you power on KVM switch, it will ask you the password, the default password value is eight zero 00000000. Please key in eight zero and enter the same value at retype field. Note: Before you are not familiar with the operation of OSD manual, please don t change the password i.e. keep default eight zero (00000000) value. Otherwise, if you have set the password and unfortunately forget the password, you need send it back to your distributor for maintaining the password. Default password is eight zero 00000000 Push Buttons Pressing the individual button cyclically through all the ports or the respective button to get PC port you want. PC port LED Indication You can press the button in order like mentioned-above diagram. When you select the PC port and this PC is shut down or this PC port is disconnected to the PC, the selected PC port LED will flash. When you select one of eight PCs ports and this PC is powered on, the selected PC port LED is lit. 7-Segment BANK LED Indication When you would like to view the next bank KVM switch, please press BANK push button cyclically to the destination bank. The bank LED will be changed from bank 1 to the maximum daisy chain level and then to press BANK push button once back to the bank 1. Bank 1 Bank 2 Bank 3 MAX BANK 10

Reset Button Push and release the reset button can reset KVM switch. This reset action will allow KVM switch to redetect connecting PC. If you add a new KVM Switch as a slave bank, please use reset button of master KVM Switch to automatically assign a new ID to it. You can view this new slave bank go through OSD menu. The PC ports of KVM Switch do not be reset by reset command. Keyboard Hot Key Commands You can also conveniently command KVM switch by switching ports through simple key sequences. To send commands to KVM switch, the SCROLL LOCK key must be pressed twice within 2 seconds. You will hear a beep for confirmation and the keyboard is in hot key mode. If you have not pressed any key in hot key mode within 2 seconds (It means to key in any key follows up key ), the keyboard will back to under Operation System control state. Below are the different hot key commands: within 2 seconds + + = Previous Channel + + = Next Channel Note: You also could press up arrow key or down arrow key longer time to speed up selecting the destination port) 11

Page + + = Previous Bank Up Page + + = Next Bank Down To select PC port: + + Bank No 1~8 Port No 0 or 1 Port No. 1~4 (4 port) 1~8 (8 port) 1~16 (16 port) + + B = Beeper Note: The default Beeper function is ON and beeper control is only for available for Scan Mode + + S = Auto Scan To get out of Auto Scan Mode, Press any key or SPACE bar. Note: + + = OSD setting back to factory default value R Not including password ROM REFLASH 12

+ + F = Search the same PC name Note: Search PC name starting from 1st PC port) F I N D : + + Space bar = On Screen Display Menu Example A. To access a computer attached to Port 4 of the three Bank. You can press through hot key as below: lock + lock + 3 + 04 B. To access a computer attached from Bank 3 to Bank 4, You can press through hot key as below: lock + lock + Page Down Note: Bank no. and Port no. selection must be made using the numeric keys on the keyboard. Numeric keys on the keypad are not available as a hot key command. 13

4. Daisy Chain Connection Please use the 3 feet 3-in-one daisy chain Cable Kit (Optional ACC-2009) to daisy chain the KVM Switch. 1. Connect Keyboard, Mouse and Monitor to the console port (white color block) of bank 1 KVM switch. 2. Use one end of 3-in-one Cable Kit to connect the daisy chain port of bank 1 and the other end for the console port (white color block) of bank 2 KVM switch. 3. Please repeat item B to daisy chain more bank as you want. But, the maximum daisy chain bank is eight levels. 4. Before chaining the slave bank up to six banks, you need a VGA extender between the fifth bank and the sixth bank to enhance the VGA signal. Note: If you would like to daisy chain 8 port and 16 port PS2 or USB KVM Switch together, the master bank must be 16 port PS/2 or USB KVM Switch 14

5. Hot Plug The KVM Switch supports Hot Plug function for easy addition or removal of PCs. The user can arrange or maintain PCs as follows: 1. A PC can be disconnected and reconnected to the same or different port of the KVM unit without having to power it off as long as it is not the Daisy-chain port or pass through port. 2. The pass through port PC (i.e. The pass through port means the console port is connected to PC directly) is powered on. Before you go hot plug function, please switch to this pass through port to next port (or say emulation port ) and then switch back to the pass through port. 3. You may unplug the mouse or the keyboard from the console port and plug it back in at any time. Note: Some O.S. (Operation Systems) like SCO Unix are unable to support Hot Plug function. If you apply Hot Plug to this kind of O.S., it will cause unpredictable behavior or shut down the PC. Before attempting to use Hot Plug, please make sure your O.S. and mouse software driver supports the Hot Plug function. 15

6. On Screen Display 1. OSD menu can be popped up in powered on PC port or non-powered on PC port or empty PC port. The resolution of OSD menu is fixed to 1024X768 for non-powered on PC port or empty PC port. 2. When you pop up the OSD menu window go through the hot key, you will see the following small window on your monitor. BANK : 1 3. SYSTEM 01 4. SYSTEM 02 5. SYSTEM 03 6. SYSTEM 04 7. SYSTEM 05 8. SYSTEM 06 9. SYSTEM 07 10 SYSTEM 08 1. SYSTEM 09 2. SYSTEM 10 11 SYSTEM 11 12 SYSTEM 12 13 SYSTEM 13 14 SYSTEM 14 15 SYSTEM 15 16 SYSTEM 16 OSD : 1 0 SEC. CHANGE PASSWORD SCAN: 1 0 SEC. CONSOLE ON/OFF ESC : QUIT ENTER :COMPLETE TAB : NEXT INSERT :EDIT A. The 1ST line bar is Bank no. B. The 2nd block is your PC system name list. You will find the system number list from 01 to 04 ( if the current box is 4 port) or from 01 to 8 (if the current box no. is 8 port)or from 01 to 16 (if the current box no. is 16 port). You can define your PC name in maximum 8 characters. The factory default of 16 port KVM switch PC name is from SYSTEM 01, SYSTEM 02,, SYSTEM 16 and 8 port KVM switch is from SYSTEM 01, SYSTEM 02,, SYSTEM 08. Besides, the sun symbol near to the PC name represents the PC system is powered on. / : SELECT PORT PgDn/PgUp: BANK SELECT To use up arrow key or down arrow key to select port for destination PC name. After you have selected the PC port already, you can press the ENTER Key to switch the PC port you want immediately To use PgUp key or PgDn key for selecting previous or next Bank no. (or Box No.) 16

BANK : 1 01 SYSTEM 01 02 SYS EM 02 To press INS key for editing PC name. After finishing the edit, please press Enter key for saving information. To use Tab key to select items like Bank, OSD, SCAN, CHANGE PASSWORD, CONSOLE ON/OFF, etc 15 SYSTEM 17 15 18 SYSTEM 16 OSD : 1 0 SEC. CHANGE PASSWORD SCAN: 1 0 SEC. ESC : QUIT TAB : NEXT CONSOLE ON/OFF ENTER :COMPLETE INSERT :EDIT A. The OSD: 10 SEC means that the OSD windows display or PC system name exists 10 sec. on your monitor. You can modify it from 05 sec to 99 sec. The factory default value is 10 B. The SCAN TIME means that scan interval from one PC port to next PC port. The sec. default SCAN time is 10 sec and the maximum scan time is 99 sec. (5 ~ 99 sec.) C. The CHANGE PASSWORD is for user to avoid all PC systems to be intruded by the other person. The default password is 8 digits 00000000. ENTER PASSWORD : ESC : QUIT ENTER : COMPLETE There is an enter password window showed out when you select this item and then press the Enter. The maximum password is eight digits. After you key in the password already and press the Enter key, there is another window for confirming your typed password. ENTER NEW PASSWORD : ESC : QUIT ENTER : COMPLETE RETYPE NEW PASSWORD : ESC : QUIT ENTER : COMPLETE You need to retype the password again for rechecking your previous key-in password is matched or not. 17

NEW PASSWORD COMPLETE ESC : QUIT ENTER : COMPLETE D. The CONSOLE ON/OFF means to manage the console of KVM switch. If you select CONSOLE ON, it means that any user can use the console. If you select CONSOLE OFF (factory default OFF state), it means that any user will not be allowed to use the console unless you enter the password. When you enter the password already and pass the KVM switch authentication, the CONSOLE will be set to ON. After you finish using KVM switch, please don t forget to set up CONSOLE ON state to OFF state. Besides, if current CONSOLE is ON state and you reset KVM switch, the CONSOLE will be set up ON state back to OFF state. E. When you finish the set up of PC name and get out of OSD setting mode, you will find the PC name showed at the up-left corner of monitor. Now, you can use ESC key to clear the message right away if you don t need it. 102 19. SYSTE F. If you want OSD returning back to factory default value, you can execute SCROLL LOCK, SCROLL LOCK, R keys in order. The bank seven segment LED on the front panel will be flashed during the refresh process. ROM REFLASH When the OSD value back to default setting, the bank seven segment LED on the front panel will stop flashing 18

7. Troubleshooting 1. Ensure that all cables are well seated. Label all of cables with the number for each respective computer to avoid confusion. 2. The recommended VGA cable distance is 5 meters maximum without ghosting and degradation. Normally, the cable length is based on driver capacity of your VGA card. If you need longer VGA cable, please use VGA extender to accomplish your applications. 3. The recommended PS/2 cable distance is 5 meters maximum. Normally, the cable length is based on driver capacity of your motherboard PS/2 port. If you need longer PS/2 cable, please use PS/2 extender to accomplish your applications. 4. The Power Jack polarity is center positive and the power adapter need be DC12V, 1A or DC9V, 1A. 5. Don t press any keys on the keyboard while the selected computer is booting up. Otherwise, it might cause the keyboard error or keyboard is not detected at PC side. 6. The computer boot up fine, but keyboard doesn t work Make sure the keyboard works when directly plugged into the computer. Try a different keyboard, but use only 101, 102 or 104-key keyboard. 7. The Mouse is not detected during PC boot up. Make sure the mouse works when directly plugged into the computer. Make sure the mouse is a true PS/2 mouse. A combo mouse will work just as long as it is set for PS/2 mode with the correct adapter. Try a different mouse. Avoiding moving the mouse or pressing the mouse buttons when switching ports. Avoiding switching ports during shutting down the PC process. When you switch one PC port to another PC port, the best scan time setting need to be set to 5 sec. or more. Normally, the VGA monitor change one resolution mode to another will take one or two seconds. So, the minimum scan time has fixed in 5 seconds, even user set it as 2 seconds. 8. The power switch is off, but the switch still works fine or power adapter is unplugged from the switch, but the switch still works fine. KVM Switch unit draws the power source from power adapter and all PC s PS/2 port. Some PC s PS/2 port can support enough power for the switch, but some PC s PS/2 port ( like laptop, notebook computer etc.) is unable to supply enough power for the switch. In order to make sure the system can work steadily, please do not set power switch to off state or remove the power adapter from the switch. Although the PCs connected to KVM Switch unit are able to support enough power to the stand alone switch, KVM Switch unit still needs a power adapter for daisy chain more banks. 9. If forgetting the password you typed, please contact your supplier. 19 V1.0