CONFIGURATION GUIDE ID-110

CONFIGURATION GUIDE ID-110 HSD 0320.011 / 09.17-V01de

Table of content Bluetooth Settings 7 Bluetooth Radio Disconnect (Reconnect via Quick Connect Barcode) 7 () Bluetooth Auto Reconnect - Default 7 () Bluetooth Auto Reconnect 7 () Bluetooth Radio Out of Range Beep 7 (B1) Bluetooth Radio Out of Range Beep and Vibrate 7 (B2) Bluetooth Radio Out of Range Beep and Vibrate 7 (B3) Bluetooth Radio Out of Range Vibrate 7 () Bluetooth HID Keyboard Mode 7 () Enable SPP Discoverable Mode 7 () Disable SPP Discoverable Mode - Default 7 () Bluetooth Serial Port Profile (SPP) Mode 7 () Batch Mode Settings 7-8 Batch Mode Disable - Default 7 () Batch Mode Enable - Log ly 7 () Batch Mode Enable - Send and Log 7 () Batch Mode Auto Transfer Buffer Memory 7 () Batch Mode Auto Transfer Buffer Memory 7 () Batch Mode Transfer All Data and Images in Memory 7 () Batch Mode Transfer ly Unsent Data in Memory 7 () Delete Buffered Scan Data 8 () USB Keyboard Mode - Batch Mode ly 8 () USB Virtual COM e Way Mode 8 () USB Speed High Speed - Batch Mode ly - Default 8 () USB Speed Full Speed - Batch Mode ly 8 (B1) General Modem Settings 8 Preemptive Mode 8 (B3) Preemptive Mode 8 () Reader Paging - Default 8 () Reader Paging 8 () General Reading Mode Settings 8-9 Continuous Scan 8 () Continuous Scan 8 () Mountable Palm Charger Motion Detection - 8 () Mountable Palm Charger Motion Detection - 8 () Anti-Glare 8 () Anti-Glare 8 () Mirroring 8 () Mirroring 8 () Targeting - Default 8 () Targeting 9 () Cell Phone Reading Enhancement 9 () Cell Phone Reading Enhancement 9 () Data Formatting (Prefix/Suffix) Settings 9-10 Turn on Timestamp Prefix 9 (B2) Turn off Timestamp Prefix - Default 9 (B3) Convert output to lowercase 9 () Erase Prefix & Suffix Data - Default 9 () Erase Prefix Data - Default 9 () Erase Suffix Data - Default 9 () Prefix AIM ID 9 () Prefix AIM ID 9 () Prefix Carriage Return Line Feed (RS232 Mode ly) 9 () Prefix Comma 9 () Prefix Space 9 () Prefix Tab (USB Keyboard Mode ly) 9 () Prefix Tab (RS232 Mode ly) 9 () 2

Table of content Suffix Carriage Return (RS232 Mode ly) Suffix Carriage Return Line Feed (RS232 Mode ly) Suffix Comma Suffix Enter (USB Keyboard Mode ly) Suffix Line Feed (RS232 Mode ly) Suffix Space Suffix Tab (USB Keyboard Mode ly) Suffix Tab (RS232 Mode ly) Translate all Characters to Uppercase Translate all Characters to Uppercase 9 () 9 () 10 () 10 () 10 () 10 () 10 (B1) 10 (B2) 10 (B3) 10 () Symbology Settings 10-17 Australian Post 10 () Australian Post 10 () Aztec - Default 10 () Aztec Inverse 10 () Aztec Inverse & Normal 10 () Aztec 10 () Codabar - Default 10 () Codabar 10 () Remove Codabar Start and Stop Delimiters 10 () Keep Codabar Start and Stop Delimiters - Default 10 () Codablock F 10 () Codablock F 11 () Code 11 11 () Code 11 11 () Code 11 Checksum Stripped from Result 11 () Code 32 (Italian Pharmacode) 11 (B1) Code 32 (Italian Pharmacode) 11 (B2) Code 39 11 (B3) Code 39 - Default 11 () Code 39 Checksum 11 () Code 39 Checksum 11 () Code 39 Checksum Stripped from Result 11 () Code 39 Extended Full ASCII 11 () Code 39 Extended Full ASCII 11 () Code 49 11 () Code 49 11 () Code 93 - Default 11 () Code 93 11 () Code 128 - Default 11 () Code 128 11 () Composite 11 () Composite 12 () Data Matrix Inverse - Default 12 () Data Matrix Inverse 12 () Data Matrix Rectangular & Rectangular Extended 12 () Data Matrix Rectangular & Rectangular Extended 12 (B1) Data Matrix Rectangular & Rectangular Extended 12 (B2) Grid Matrix 12 (B3) Grid Matrix 12 () All GS1 DataBar - Default 12 () All GS1 DataBar 12 () GS1 DataBar Limited 12 () GS1 DataBar Limited 12 () GS1 DataBar Expanded 12 () GS1 DataBar Expanded 12 () GS1 DataBar Expanded Stacked 12 () GS1 DataBar Expanded Stacked 12 () GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional 12 () 3

Table of content GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional GS1 DataBar Omnidirectional and GS1 DataBar Truncated GS1 DataBar Omnidirectional and GS1 DataBar Truncated Han Xin Han Xin Hong Kong 2 of 5 Hong Kong 2 of 5 Int 2 of 5 - Default Int 2 of 5 Int 2 of 5 Checksum Stripped from Result Int 2 of 5 Checksum Int 2 of 5 Checksum Japan Post Japan Post KIX (Dutch Post) Code KIX (Dutch Post) Code Korean Post Korean Post Maxicode Maxicode Matrix 2 of 5 Matrix 2 of 5 Micro PDF417 Micro PDF417 MSI Plessey MSI Plessey NEC 2 of 5 NEC 2 of 5 PDF417 - Default PDF417 Pharmacode Pharmacode Reverse Barcode Decoding (Right to Left) Pharmacode Normal Barcode Decoding (Left to Right) Pharmacode All QR Code Standard QR Code - Default All QR Code Straight 2 of 5 Straight 2 of 5 Telepen Output Telepen as ASCII Output Telepen as Numeric - Default Telepen Trioptic Trioptic - Enable Reverse Order option (Bit 3) Trioptic - Disable Reverse Order option (Bit 3) - Default Trioptic UK Plessey UK Plessey UK Royal Mail UK Royal Mail UPC UPC - Default UPC Supplemental Transmit UPC-A Number System UPC Supplemental Transmit UPC-A Check Digit - Default Transmit UPC-A Check Digit Transmit UPC-A Number System - Default Convert UPC-A to EAN-13 12 () 12 () 12 () 13 () 13 () 13 () 13 () 13 (B1) 13 (B2) 13 (B3) 13 () 13 () 13 () 13 () 13 () 13 () 13 () 13 () 13 () 13 () 13 () 13 () 13 () 14 () 14 () 14 () 14 () 14 (B1) 14 (B2) 14 (B3) 14 () 14 () 14 () 14 () 14 () 14 () 14 () 14 () 14 () 14 () 14 () 14 () 14 () 15 () 15 () 15 () 15 () 15 (B1) 15 (B2) 15 (B3) 15 () 15 () 15 () 15 () 15 () 15 () 15 () 15 () 15 () 15 () 4

Table of content Convert UPC-A to EAN-13 UPC-E Expansion UPC-E Expansion Transmit UPC-E Check Digit - Default Transmit UPC-E Check Digit Transmit UPC-E Number System - Default Transmit UPC-E Number System Transmit EAN-8 Check Digit - Default Transmit EAN-8 Check Digit Convert EAN-8 to EAN-13 Convert EAN-8 to EAN-13 Transmit EAN-13 Check Digit - Default Transmit EAN-13 Check Digit Convert Bookland EAN-13 to ISBN Convert Bookland EAN-13 to ISBN Convert Bookland EAN-13 to ISSN Convert Bookland EAN-13 to ISSN UPU ID-Tag UPU ID-Tag USPS Intelligent Mail/IMB/ 4-State CB USPS Intelligent Mail/IMB/ 4-State CB USPS Planet USPS Planet USPS Postnet USPS Postnet Grid Matrix & Grid Matrix Inverse Decoding Grid Matrix & Grid Matrix Mirror Decoding Grid Matrix, Grid Matrix Inverse & Grid Matrix Mirror Decoding GoCode & GoCode Inverse Decoding GoCode & GoCode Mirror Decoding GoCode, GoCode Inverse & GoCode Mirror Decoding Code 11 Decoding with one checksum digit checked, and remove checksum from output 15 () 15 () 15 () 16 () 16 () 16 () 16 () 16 (B1) 16 (B2) 16 (B3) 16 () 16 () 16 () 16 () 16 () 16 () 16 () 16 () 16 () 16 () 16 () 16 () 16 () 17 () 17 () 17 () 17 () 17 (B1) 17 (B2) 17 (B3) 17 () 17 () Keyboard Language Settings 17-18 Keyboard Support: French Keyboard Mapping for Apple 17 () Keyboard Support: USInternational (Universal) Keyboard Mapping for Windows 17 () English (US) Keyboard Mapping for Windows 17 () English (UK) Keyboard Mapping for Windows 17 () Belgian French Keyboard Mapping for Windows 17 () French Keyboard Mapping for Windows 17 () German Keyboard Mapping for Windows 17 () Japanese Keyboard Mapping for Windows 17 () Latin American Keyboard Mapping for Windows 17 () Spanish Keyboard Mapping for Windows 17 () Swiss German Keyboard Mapping for Windows 18 () English Keyboard Mapping for Apple 18 () Keyboard Support: Spanish Keyboard Mapping for Apple 18 () Italian Keyboard Mapping for Apple 18 () German-Swiss Keyboard Mapping for Apple 18 (B1) German Keyboard Mapping for Apple 18 (B2) Russian Keyboard Mapping for Windows 18 (B3) Control Character Input - Ctrl + Character 18 () Control Character Input - Alt + Keypad 18 () Control Character Input -Alt + Leading Zero 18 () Control Character Input - Language - Default 18 () Data Encoding: Raw ASCII to Keyboard XML File Lookup - Default 18 () Data Encoding: UTF8 to Unicode Codepoint - Alt Sequences for Windows 18 () Reader (Legacy) - US English Keyboard Mapping - with Leading 0 for Non Printable ASCII - Default 18 () 5

Operating System Settings 18 Alternative Operating System (Linux/Mac) 18 () Alternative Operating System (Linux/Mac) 18 () USB Settings (Non-Batch Mode) 18-19 Modem - USB Keyboard Communication Mode - Default 18 () USB Downloader Mode 18 () Modem - USB HID POS 19 () Modem - USB Virtual COM Mode 19 () USB Settings 19 Reader - USB Virtual COM CDC Raw Mode 19 () RS232 Settings (for use with CodeXML M3 Modem ly) 19 RS232 Communication Mode 19 (B2) RS232 Interface - 9600 Baud Rate - Default 19 (B3) RS232 Interface - 19200 Baud Rate 19 () RS232 Interface - 38400 Baud Rate 19 () RS232 Interface - 57600 Baud Rate 19 () RS232 Interface - 115200 Baud Rate 19 () RS232 Settings 19 Reader - Enable RS232 OPOS/JPOS 19 () Reader Feedback Settings 19-20 Beep Vibrate - Default 19 () Beep Vibrate 19 () Beep Vibrate 19 () Beep Vibrate 19 () Disable AES Encryption - Default 19 () Beep Volume 100% - Default 20 () Beep Volume 67% 20 () Beep Volume 33% 20 () Beep Volume 0% 20 () Scan Delay Settings 20 Duplicate Scan Disabled - Default 20 (B2) 1 Second Duplicate Scan Delay 20 (B3) 2 Second Duplicate Scan Delay 20 () 3 Second Duplicate Scan Delay 20 () 5 Second Duplicate Scan Delay 20 () 10 Second Duplicate Scan Delay 20 () 30 Second Duplicate Scan Delay 20 () 1 Hour Duplicate Scan Delay 20 () 1 Day Duplicate Scan Delay 20 () Power Settings 20 Power in 1 Hour 20 () Power in 2 Hour 20 () Power in 4 Hours 20 () Miscellaneous Settings 20-21 Read Both Wide and High Density Field - Default 20 () Read High Density Field ly 21 () Read Wide Field ly 21 () Enable AES Encryption 21 () Bottom Button Take Picture 21 () Top Button Take Picture 21 (B1) Locked Reader Accept Host Commands - Default 21 (B2) Locked Reader Reject Host Commands 21 (B3) Allow Wireless Switching on a Locked Reader - Default 21 () Prevent Wireless Switching on a Locked Reader 21 () 6

Reader/Modem Command Settings 21 Reader ID and Firmware Version 21 () Modem ID and Firmware Version 21 () Reader Text Commands 21 () Reader Text Commands 21 () Reset, Clear and Save Reader Settings 21 Reset Reader to RF Factory Defaults 21 () Clear All JavaScript Rules 21 () Clear All Stored Data and Images 21 () Save All Reader Settings - Default 21 () Reboot Reader 21 () 7

Bluetooth Radio Disconnect (Reconnect via Quick Connect Barcode) Bluetooth Auto Reconnect - Default Bluetooth Auto Reconnect Bluetooth Settings Bluetooth Radio Out of Range Beep Bluetooth Radio Out of Range Beep and Vibrate Bluetooth Radio Out of Range Beep and Vibrate Bluetooth Radio Out of Range Vibrate Bluetooth HID Keyboard Mode Enable SPP Discoverable Mode Disable SPP Discoverable Mode - Default Bluetooth Serial Port Profile (SPP) Mode Batch Mode Disable - Default Batch Mode Enable - Log ly Batch Mode Enable - Send and Log Batch Mode Settings Batch Mode Auto Transfer Buffer Memory Batch Mode Auto Transfer Buffer Memory Batch Mode Transfer All Data and Images in Memory Batch Mode Transfer ly Unsent Data in Memory 8

Delete Buffered Scan Data USB Keyboard Mode - Batch Mode ly USB Virtual COM e Way Mode USB Speed High Speed - Batch Mode ly - Default USB Speed Full Speed - Batch Mode ly General Modem Settings Preemptive Mode Preemptive Mode Reader Paging - Default Reader Paging Continuous Scan General Reading Mode Settings Continuous Scan Mountable Palm Charger Motion Detection - Mountable Palm Charger Detection - Motion Anti-Glare Anti-Glare Mirroring Mirroring Targeting - Default 9

Targeting Cell Phone Reading Enhancement Cell Phone Reading Enhancement Intentionally Blank Data Formatting (Prefix/Suffix) Settings Turn on Timestamp Prefix Turn off Timestamp Prefix - Default Convert output to lowercase Erase Prefix & Suffix Data - Default Erase Prefix Data - Default Erase Suffix Data - Default Prefix AIM ID Prefix AIM ID Prefix Carriage Return Line Feed (RS232 Mode ly) Prefix Comma Prefix Space Prefix Tab (USB Keyboard Mode ly) Prefix Tab (RS232 Mode ly) Suffix Carriage Return (RS232 Mode ly) Suffix Carriage Return Line Feed (RS232 Mode ly) 10

Suffix Comma Suffix Enter (USB Keyboard Mode ly) Suffix Line Feed (RS232 Mode ly) Suffix Space Suffix Tab (USB Keyboard Mode ly) Suffix Tab (RS232 Mode ly) Translate all Characters to Uppercase Translate all Characters to Uppercase Symbology Settings Australian Post Australian Post Aztec - Default Aztec Inverse Aztec Inverse & Normal Aztec Codabar - Default Codabar Remove Codabar Start and Stop Delimiters Keep Codabar Start and Stop Delimiters - Default Codablock F 11

Codablock F Code 11 Code 11 Code 11 Checksum Stripped from Result Code 32 (Italian Pharmacode) Code 32 (Italian Pharmacode) Code 39 Code 39 - Default Code 39 Checksum Code 39 Checksum Code 39 Checksum Stripped from Result Code 39 Extended Full ASCII Code 39 Extended Full ASCII Code 49 Code 49 Code 93 - Default Code 93 Code 128 - Default Code 128 Composite 12

Composite Data Matrix Inverse - Default Data Matrix Inverse Data Matrix Rectangular & Rectangular Extended Data Matrix Rectangular & Rectangular Extended Data Matrix Rectangular & Rectangular Extended Grid Matrix Grid Matrix All GS1 DataBar - Default All GS1 DataBar GS1 DataBar Limited GS1 DataBar Limited GS1 DataBar Expanded GS1 DataBar Expanded GS1 DataBar Expanded Stacked GS1 DataBar Expanded Stacked GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional GS1 DataBar Stacked and GS1 DataBar Stacked Omnidirectional GS1 DataBar Omnidirectional and GS1 DataBar Truncated GS1 DataBar Omnidirectional and GS1 DataBar Truncated 13

Han Xin Han Xin Hong Kong 2 of 5 Hong Kong 2 of 5 Int 2 of 5 - Default Int 2 of 5 Int 2 of 5 Checksum Stripped from Result Int 2 of 5 Checksum Int 2 of 5 Checksum Japan Post Japan Post KIX (Dutch Post) Code KIX (Dutch Post) Code Korean Post Korean Post Maxicode Maxicode Matrix 2 of 5 Matrix 2 of 5 Micro PDF417 14

Micro PDF 417 MSI Plessey MSI Plessey NEC 2 of 5 NEC 2 of 5 PDF 417 - Default PDF 417 Pharmacode Pharmacode Reverse Barcode Decoding (Right to Left) Pharmacode Normal Barcode Decoding (Left to Right) Pharmacode All QR Code Standard QR Code - Default All QR Code Straight 2 of 5 Straight 2 of 5 Telepen Output Telepen as ASCII Output Telepen as Numeric - Default Telepen 15

Trioptic Trioptic - Enable Reverse Order option (Bit 3) Trioptic - Disable Reverse Order option (Bit 3) - Default Trioptic UK Plessey UK Plessey - Default UK Royal Mail UK Royal Mail UPC UPC - Default UPC Supplemental Transmit UPC-A Number System UPC Supplemental Transmit UPC-A Check Digit - Default Transmit UPC-A Check Digit Transmit UPC-A Number System - Default Convert UPC-A to EAN-13 Convert UPC-A to EAN-13 UPC-E Expansion UPC-E Expansion 16

Transmit UPC-E Check Digit - Default Transmit UPC-E Check Digit Transmit UPC-E Number System - Default Transmit UPC-E Number System Transmit EAN-8 Check Digit -Default Transmit EAN-8 Check Digit Convert EAN-8 to EAN-13 Convert EAN-8 to EAN-13 -Default Transmit EAN-13 Check Digit - Default Transmit EAN-13 Check Digit Convert Bookland EAN-13 to ISBN Convert Bookland EAN-13 to ISBN Convert Bookland EAN-13 to ISSN Convert Bookland EAN-13 to ISSN UPU ID-Tag UPU ID-Tag USPS Intelligent Mail/IMB/ 4-State CB USPS Intelligent Mail/IMB/ 4-State CB USPS Planet USPS Planet 17

ID-110 Configuration Guide USPS Postnet USPS Postnet Grid Matrix, Grid Matrix Inverse & Grid Matrix Mirror Decoding B1 Code 11 Decoding with one checksum digit checked, and remove checksum from output Grid Matrix & Grid Matrix Inverse Decoding Grid Matrix & Grid Matrix Mirror Decoding GoCode & GoCode Inverse Decoding GoCode & GoCode Mirror Decoding GoCode, GoCode Inverse & GoCode Mirror Decoding B2 B3 Keyboard Support: French Keyboard Mapping for Apple Keyboard Support: USInternational (Universal) Keyboard Mapping for Windows Keyboard Language Settings English (US) Keyboard Mapping for Windows German Keyboard Mapping for Windows 18 English (UK) Keyboard Mapping for Windows Japanese Keyboard Mapping for Windows Belgian French Keyboard Mapping for Windows Latin American Keyboard Mapping for Windows French Keyboard Mapping for Windows Spanish Keyboard Mapping for Windows

Swiss German Keyboard Mapping for Windows English Keyboard Mapping for Apple Keyboard Support: Spanish Keyboard Mapping for Apple Italian Keyboard Mapping for Apple German-Swiss Keyboard Mapping for Apple German Keyboard Mapping for Apple Russian Keyboard Mapping for Windows Control Character Input - Ctrl + Character Control Character Input - Alt + Keypad Control Character Input -Alt + Leading Zero Control Character Input - Language - Default Data Encoding: Raw ASCII to Keyboard XML File Lookup - Default Data Encoding: UTF8 to Unicode Codepoint - Alt Sequences for Windows Reader (Legacy) - US English Keyboard Mapping - with Leading 0 for Non Printable ASCII - Default Operating System Settings Alternative Operating System (Linux/Mac) Alternative Operating System (Linux/Mac) Modem - USB Keyboard Communication Mode - Default USB Downloader Mode USB Settings (Non-Batch Mode) 19

Modem - USB HID POS Modem - USB Virtual COM Mode Reader - USB Virtual COM CDC Raw Mode USB Settings RS232 Settings (for use with CodeXML M3 Modem ly) RS232 Communication Mode RS232 Interface - 9600 Baud Rate - Default RS232 Interface - 19200 Baud Rate RS232 Interface - 38400 Baud Rate RS232 Interface - 57600 Baud Rate RS232 Interface - 115200 Baud Rate Intentionally Blank Reader - Enable RS232 OPOS/JPOS Beep Vibrate - Default RS232 Settings Reader Feedback Settings Beep Vibrate Beep Vibrate Beep Vibrate Disable AES Encryption - Default 20

Beep Volume 100% - Default Beep Volume 67% Beep Volume 33% Beep Volume 0% Duplicate Scan Disabled - Default 1 Second Duplicate Scan Delay 2 Second Duplicate Scan Delay Scan Delay Settings 3 Second Duplicate Scan Delay 5 Second Duplicate Scan Delay 10 Second Duplicate Scan Delay 30 Second Duplicate Scan Delay 1 Hour Duplicate Scan Delay 1 Day Duplicate Scan Delay Power in 1 Hour Power Settings Power in 2 Hour Power in 4 Hours Read Both Wide and High Density Field - Default Miscellaneous Settings 21

Read High Density Field ly Read Wide Field ly Enable AES Encryption Bottom Button Take Picture Top Button Take Picture Locked Reader Accept Host Commands - Default Locked Reader Reject Host Commands Allow Wireless Switching on a Locked Reader - Default Prevent Wireless Switching on a Locked Reader Reader ID and Firmware Version Modem ID and Firmware Version Reader/Modem Command Settings Reader Text Commands Reader Text Commands Reset Reader to RF Factory Defaults Reset, Clear and Save Reader Settings Clear All JavaScript Rules Clear All Stored Data and Images Save All Reader Settings - Default Reboot Reader 22

23

CONTACT US di-soric Solutions GmbH & Co. KG Steinbeisstraße 6 73660 Urbach Germany Fon: +49 (0) 71 81 / 98 78-0 Fax: +49 (0) 71 81 / 98 78-177 solutions@di-soric.com HEADQUARTERS di-soric GmbH & Co. KG Steinbeisstraße 6 73660 Urbach Germany Fon: +49 (0) 71 81 / 98 79-0 Fax: +49 (0) 71 81 / 98 79-179 info@di-soric.com www.di-soric.com di-soric INTERNATIONAL AUSTRIA di-soric Austria GmbH & Co. KG Burg 39 4531 Kematen an der Krems Austria Fon: +43 (0) 72 28 / 72 366 Fax: +43 (0) 72 28 / 72 366-4 info.at@di-soric.com FRANCE di-soric SAS 19, Chemin du Vieux Chêne 38240 Meylan France Fon: +33 (0) 4 76 / 61 65 90 Fax: +33 (0) 4 76 / 61 65 98 info.fr@di-soric.com SINGAPORE di-soric Pte. Ltd. 33 Ubi Avenue 3, #03-47 Vertex Singapore 408868 Singapore Fon: +65 / 66 34 38 43 Fax: +65 / 66 34 38 44 info.sg@di-soric.com Sensors Lighting Vision ID www.di-soric.com