Disconnectable Crimp style Wire-to-wire connectors Signal/hybrid type drawer connector for unit connection. The RFC connector absorbs misalignment between the two units and also excels in durability. The contact reliability has been enhanced by reviewing contact structure. Specifications Current rating: Signal circuit.0 A AC, DC (AWG #26, AWG #27 ) Power supply circuit 5 A AC, DC (AWG #4) Voltage rating: Signal circuit 50 V AC, DC Power supply circuit 250 V AC, DC Temperature range: -25 C to +85 C (including temperature rise in applying electrical current) Contact resistance: Signal circuit Initial value/ 40 mω max. After environmental tests/ 60 mω max. Power supply circuit Initial value/ 0 mω max. After environmental tests/ 20 mω max. Insulation resistance: 500 MΩ min. Withstanding voltage: Signal circuit 500 VAC Power supply circuit,500 VAC Applicable wire: Power supply circuit Conductor size/ AWG #22 to #4 Insulation O.D./.55 to 3.6 mm signal circuit Conductor size/ AWG #30 to #26 Insulation O.D./ 0.6 to 0.8 mm signal circuit Applicable socket/ CSR, CSH connectors Durability: 5,000 cycles * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. Standards 0 Recognized E60389 2J5027292
Panel layout and Assembly layout Panel thickness: t2.0 Edge Edge Panel thickness: t0.8 t2.0 Mating circuit signal unit RFC receptacle CSH/CSR contact for power supply circuit 2
Panel layout and Assembly layoutt Panel thickness: t.0 Details of P area P area Connector mating axis Panel thickness: t2.0 Details of P2 area P2 area Connector mating axis Panel thickness: t0.8 t2.0 3 Mating circuit signal unit RFC receptacle CSH/CSR contact for power supply circuit
Panel layout and Assembly layout Panel thickness: t0.8 t2.0 Panel thickness: t0.8 t2.0 Note) C, F and G dimensions: Refer to page 6. Connector mating axis Panel thickness: t0.8 t2.0 Note) C, F and G dimensions: Refer to page 7. M3 screw M3 screw Panel thickness: t0.8 t2.0 Note) C, F and G dimensions: Refer to page 6. Mating circuit signal unit RFC receptacle CSH/CSR contact for power supply circuit Connector mating axis Note:. Punch holes in the panel according to the figures shown above. Burrs must be removed. 2. The strength of the panel must be considered when punching two or more holes. 3. The connector must be inserted from the same side as the hole is punched. Note) C, F and G dimensions: Refer to page 7. 4
contact for power supply circuit SRFM-0GG-S0.9 SRFM-6GG-S0.9 Applicable wire mm 2 AWG# 0.30.5 2220 0.752.0 84 Insulation O.D. (mm) Q ty/ reel Copper alloy, nickel-undercoated, Mating part; gold-plated Crimping part; tin-plated (reflow treatment) contact for power supply circuit Circuit No. Circuit No. SRFF-0GG-S0.9 SRFF-6GG-S0.9 Applicable wire mm 2 AWG# 0.30.5 2220 0.752.0 84 Insulation O.D. (mm) reel Copper alloy, nickel-undercoated, Mating part; gold-plated Crimping part; tin-plated (reflow treatment) Contact Crimping machine Crimp applicator Applicator Dies Crimp applicator with dies Contact Crimping machine Crimp applicator Applicator Dies Crimp applicator with dies SRFM-0GG-S0.9 SRFM-6GG-S0.9 SRFF-0GG-S0.9 SRFF-6GG-S0.9 <9 circuits or less> < circuits or more> Applicable wire mm 2 AWG# Insulation O.D. (mm) Q ty/ reel SRFCP-002GG-M0.9 0.050.3 3026 Copper alloy, nickel-undercoated, Mating part; gold-plated Crimping part; tin-plated (reflow treatment) RFCYP-09-Z-S RFCYP--Z RFCYP-3-Z RFCYP-5-Z RFCYP-7-Z RFCYP-9-Z RFCYP-2-Z RFCYP-23-Z Contact Crimping machine Crimp applicator Applicator Dies Crimp applicator with dies SRFCP-002GG-M0.9 LCP, UL94V-0, natural 5
Circuit No. Power supply Signal RFCP-09S0-RJ-M Q ty/ Power supply Signal RFCP-5S3-SRL-K Q ty/ PBTUL94V-0, green LCPUL94V-0, black Circuit No. Power supply Signal RFCP-28W0-E RFCP-36W0-E RFCP-44W0-E A B C D E F G PBT, UL94V-0, blue Note: F and G dimensions; Refer to the panel layout (page 4). Power supply Signal RFCP-24W6-E RFCP-36W6-E A B C D E F G PBT, UL94V-0, blue Note: F and G dimensions; Refer to the panel layout (page 4). Q ty/ 6
Circuit No. Circuit No. Circuit No. Power supply Signal 09S0R-RFC-MGD Q ty/ Power supply Signal 5S3R-RFC-SKGD Q ty/ Signal contact: Copper alloy, nickel-undercoated, selective gold-plated tin-plated (reflow treatment) Housing: PBT, UL94V-0, green Signal contact: Copper alloy, nickel-undercoated, selective gold-plated tin-plated (reflow treatment) Housing: LCP, UL94V-0, black Line B/Circuit No. Circuit No. Line A/Circuit No. Power supply Signal 7 28W0R-RFC-EGD 36W0R-RFC-EGD 44W0R-RFC-EGD A B C D E F G Signal contact: Copper alloy, nickel-undercoated, selective gold-plated tin-plated (reflow treatment) Housing: PBT, UL94V-0, blue Note: F and G dimensions; Refer to the panel layout (page 4). Power supply Signal 24W6R-RFC-EGD-G 36W6R-RFC-EGD-G A B C D E F G Signal contact: Copper alloy, nickel-undercoated, selective gold-plated tin-plated (reflow treatment) Housing: PBT, UL94V-0, blue Note: F and G dimensions; Refer to the panel layout (page 4).
CSR connector socket <9, circuits> 9 3 5 7 9 2 23 09CSR-8PK CSR-8PK 3CSR-8PK 5CSR-8PK 7CSR-8PK 9CSR-8PK 2CSR-8PK 23CSR-8PK A B C 8.0 0.0 6.7 0.0 2.0 6.7 2.0 4.0 7.2 4.0 6.0 7.2 6.0 8.0 7.2 8.0 20.0 7.2 20.0 22.0 7.2 22.0 24.0 7.2 5,400 4,500 3,780 3,240 2,880 2,700 2,340 2,60 <3, 5, 7, 9, 2, 23 circuits> Contact: Copper alloy, tin-plated Housing: PBT, UL94V-0, pink 3 5 7 9 CSH--PK-N CSH-3-PK-N CSH-5-PK-N CSH-7-PK-N CSH-9-PK-N A B C 0.0 2.0 6.7 2.0 4.0 7.2 4.0 6.0 7.2 6.0 8.0 7.2 8.0 20.0 7.2 0,000 0,000 0,000 5,000 5,000 Housing: PBT, UL94V-0, pink CSH connector contact Applicable wire mm 2 AWG# Insulation O.D. (mm) reel SCSH-002T-P0.2N 0.050.3 3026 Copper alloy, tin-plated (reflow treatment) Contact Crimping machine Crimp applicator Applicator Dies Crimp applicator with dies SCSH-002T-P0.2N CSH connector housing < circuits> <3, 5, 7, 9 circuits> 8