ASD LED Edge-Lit CCT Adjustable Panels have eliminated the need to settle on a single color temperature. These groundbreaking panels offer the ability to change color temperature (3K-5K) with the push of a button. Using either a hand held or wall mounted remote control, the user can adjust CCT, dim and power sets of panels. There is no need for multiple remotes as a single remote can control up to 4 groupings of panels. These Edge-Lit Panels are an ideal choice for multi-purpose spaces where color temperature and brightness play an important role. Like our Standard Edge lit flat panels, these adjustable models have low energy consumption, long life and produce even light virtually eliminating glare and shadows. And at a width of only half an inch these are not only the most versatile but also the slimmest panels on the market today. FEATURES AND BENEFITS: Wireless brightness and CCT control CCT adjustable 3K-5K Delay turn-off option Low energy consumption White frame Standard ~1 V dimming Available in 2x2 and 2x4 sizes L7 Life > 1, hrs Available in DLC Standard and DLC Premium culus certified 5-year limited warranty ORDERING MATRIX: Family Modification Size Dimmable ~1 V Watts CCT Series ASD-ELP 5 XX D XX CC XXX Edge-Lit Panel = type 2x2 Dimmable 27 = 27 W 3,-5, K STD = Standard DLC 24 = type 2x4 4 = 4 W PRM = Premium DLC LED EDGE-LIT PANEL CCT ADJUSTABLE: Model Type Watts Dimming Compatible Lumens Dimensions (LxWxH) ASD-ELP5-D27CC-STD 2х2 27 W YES 2,96-3,128 lm 23.7" х 23.7" х.3" ASD-ELP5-D27CC-PRM 2х2 27 W YES 3,-3,5 lm 23.7" х 23.7" х.3" ASD-ELP5-24D4CC-STD 2х4 4 W YES 4,51-4,645 lm 23.7" x 47.75" x.3" ASD-ELP5-24D4CC-PRM 2х4 4 W YES 5,371-5,4 lm 23.7" x 47.75" x.3" WebSite: www.asd-lighting.com Fax: 339-52-897
PRODUCT SPECIFICATIONS: Construction & Materials Housing Aluminum Lens Translucent white Finish White Weight ASD-ELP5-D27CC-STD 8.3 lbs (3.65 kg) ASD-ELP5-24D4CC-STD 15. lbs (6.9 kg) ASD-ELP5-D27CC-PRM ASD-ELP5-24D4CC-PRM Environmental System Work Environment Indoor use Operating Temperature to (-1 to +4 ) Humidity 2% - 85% RH, non condensing L7 Life > 1, hrs Optical System Luminous Flux ASD-ELP5-D27CC-STD 2,96-3,128 lm ASD-ELP5-24D4CC-STD 4,51-4,645 lm ASD-ELP5-D27CC-PRM 3,-3,5 lm ASD-ELP5-24D4CC-PRM 5,371-5,4 lm Color Temperature 3, - 5, K CRI 8 Electrical System Input Voltage 1~277VAC 5/6 Hz Max input current ASD-ELP5-D27CC-STD.4 A ASD-ELP5-24D4CC-STD.6 A ASD-ELP5-D27CC-PRM ASD-ELP5-24D4CC-PRM Inrush current 5 A Action time (Inrush current).5s AC input range min 1 V max 35 V Off State Power W Power Consumption ASD-ELP5-D27CC-STD 27 W ASD-ELP5-24D4CC-STD 4 W ASD-ELP5-D27CC-PRM ASD-ELP5-24D4CC-PRM Power Factor.99 Output voltage ASD-ELP5-D27CC-STD 3- V ASD-ELP5-24D4CC-STD 3- V ASD-ELP5-D27CC-PRM ASD-ELP5-24D4CC-PRM Max output current ASD-ELP5-D27CC-STD 8 ma ASD-ELP5-24D4CC-STD 1,2 ma ASD-ELP5-D27CC-PRM ASD-ELP5-24D4CC-PRM LED driver class P, class 2 Control Dimming Switch Standard ~1 V dimming 5% - 1% Regular and Voluntary Certifications 5-year limited warranty DesignLights Consortium (DLC) listed (Classification: Standard) DesignLights Consortium (DLC) listed (Classification: Premium) culus certified E4754 - Recessed mounted panel WebSite: www.asd-lighting.com Fax: 339-52-897
STANDARD SERIES TYPE 2x2 27W 23 3/4" (63 mm) 2 1/4" (3 mm) TYPE 2x4 4W 48 3/4" (1213 mm) 2 1/4" (3 mm) 23 3/4" (63 mm) 23 3/4" (63 mm) Color temperature 1/4" (1 mm) 1/4" (1 mm) 3,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 3,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1-15 -/+ 15-15 -/+ 15-12 12-12 12 3 3-9 9-9 9 2 4 4-6 6 6 8-3 1 3 C/,1.6 C3/21,1.3 C6/24,1.5 C9/27,1.7 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 6..99 S(m) 5..8 4..5 3..4 2..3 8-6 12 6 16-3 2 3 C/,1.9 C3/21,1.3 C6/24,1.3 C9/27,1.5 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 9.6 1.6 S(m) 8. 1.3 6.4.8 4.8.64 3.2.48 4,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 4,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1-15 -/+ 15-15 -/+ 15-12 12-12 12 3 3-9 9-9 9 3 4-6 6 9 12 6-6 8 12 16 6-3 15 3 C/,1.6 C3/21,1.2 C6/24,1.5 C9/27,1.7 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 6.4 1.1 S(m) 5.3.85 4.3.53 3.2.43 2.1.32-3 2 3 C/,1.9 C3/21,1.3 C6/24,1.3 C9/27,1.4 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 1. 1.7 S(m) 8.3 1.3 6.7.83 5..67 3.3.5 5,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 5,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1-15 -/+ 15-15 -/+ 15-12 12-12 12 3 3-9 9-9 9 3 4 6-6 9 6 12-3 15 3 C/,1.6 C3/21,1.3 C6/24,1.5 C9/27,1.7 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 6.4 1.1 S(m) 5.3.85 4.2.53 3.2. 2.1.32 8-6 12 6 16-3 3 2 C/,1.9 C3/21,1.3 C6/24,1.3 C9/27,1.4 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 1. 1.7 S(m) 8.5 1.4 6.8.85 5.1.68 3.4.51 WebSite: www.asd-lighting.com Fax: 339-52-897
PREMIUM SERIES TYPE 2x2 27W 23 3/4" (63 mm) 2 1/4" (3 mm) TYPE 2x4 4W 48 3/4" (1213 mm) 2 1/4" (3 mm) 23 3/4" (63 mm) 23 3/4" (63 mm) Color temperature 1/4" (1 mm) 1/4" (1 mm) 3,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 3,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 -/+ -/+ -15 15-15 15-12 12-12 12 3 3-9 9-9 9 3 4-6 6 9 12 6-6 8 12 16 6-3 15 3 C/,1.9 C3/21,1.3 C6/24,1.3 C9/27,1.4 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 6.6 1.1 S(m) 5.5.88 4.4.55 3.3.44 2.2.33-3 2 3 C/,1.9 C3/21,1. C6/24,1.1 C9/27,1.3 AVERAGE BEAM ANGLE(5%):1.3 DEG 5. 16.5 33. 9.9 1.7 S(m) 8.3 1.3 6.6.83 5..66 3.3.5 4,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 4,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 -/+ -/+ -15 15-15 15-12 12-12 12 3 3-9 9-9 9 3 4-6 6 9 12 6-6 8 12 16 6-3 15 3 C/,1.9 C3/21,1.3 C6/24,1.3 C9/27,1.4 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 6.7 1.1 S(m) 5.6.89 4.5.56 3.3.45 2.2.33-3 2 3 C/,1.9 C3/21,113.9 C6/24,113.9 C9/27,1. AVERAGE BEAM ANGLE(5%):1.2 DEG 5. 16.5 33. 1. 1.7 S(m) 8.4 1.3 6.7.84 5..67 3.4.5 5,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 5,K C PLANE ISOLUX DIAGRAM (UNIT:lx) 1 -/+ -/+ -15 15-15 15-12 12-12 12 3 3-9 9-9 9 3 4-6 6 9 12 6-6 8 12 16 6-3 15 3 C/,1.9 C3/21,1.3 C6/24,1.3 C9/27,1.4 AVERAGE BEAM ANGLE(5%):1.5 DEG 5. 16.5 33. 6.4 1.1 S(m) 5.4.86 4.3.54 3.2.43 2.1.32-3 2 3 C/,1.9 C3/21,113.8 C6/24,113.8 C9/27,113.9 AVERAGE BEAM ANGLE(5%):1.1 DEG 5. 16.5 33. 1. 1.7 S(m) 8.5 1.4 6.8.85 5.1.68 3.4.51 WebSite: www.asd-lighting.com Fax: 339-52-897
PACKAGE CONTENTS: Description Q-ty LED Edge-Lit Flat Panel 2 Installation Instructions 3 ELECTRICAL SCHEMATIC DIAGRAM DIMMER PANEL LIGHT PANEL LIGHT -1v L(in) L(out) N(in) + - Dim+ Dim- L N Ground Dim+ Dim- L N Ground Power connector 12~277V 5/6 Hz L (live/hot) connect black N (neutral) connect white G (ground) connect green X PANEL WARNING RISK OF PERSONAL INJURY READ and follow all WARNINGS and installation instructions. Keep or give to the owner for future reference. Risk of cuts: Wear gloves to prevent cuts or abrasions when removing from carton, handling, installing, and maintaining this product. Risk of electric shock: This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved. Risk of Fire: Minimum 9 С supply conductors. Consult a qualified electrician to ensure correct branch circuit conductor. ASD assumes no responsibility for claims arising out of improper or careless Installation or handling of this product. For recessed installation: Access above ceiling required. Inherently protected. Vapor barrier must be suitable for 9 C. WebSite: www.asd-lighting.com Fax: 339-52-897
LED Edge-Lit Flat Panels CCT Adjustable THE HANDHELD REMOTE CONTROLLER: TURN ON TURN OFF Pairing the Light While holding the "ID" button power on your panels. Your panels should flash twice to indicate they are paired. You can pair several lights at once. Disconnect Remote from Panels While holding the down arrow and the ID button turn on your panels, this will disconnect them from your remote. Panels will flash twice to indicate they are no longer paired. Group Selecting Buttons To assign panels to a group you must first pair them with your remote. Once paired hold the # button you wish to assign to your panels. While the lights are off hold the # button and turn on your switch. Panels will turn on. Do not release the button until the panels flash one time. The flash may not occur till after 3 seconds of turning on the lights. If you release before the flash your groups will not be set up. Delay Turn-Off Press the "clock" button to initiate delayed turn off function. Your lights will flash once and turn off after 1 seconds. Pressing the ON button will cancel this function. All groups selected Color temperature selecting/saving After selecting the color temperature, press the button OFF then turn on the light to save the color temperature. 5,K 4,K 3,5K 3,K 25% brightness 5% brightness 75% brightness 1% brightness Decrease brightness Increase brightness Decrease color temperature Increase color temperature After turned on, the light will automatically detect the -1v dimmer to set brightness,it will get 1% brightness if no dimming signal to input the light. If use -1V dimmer to control, light brightness will convert to -1V dimmer s current setting brightess. If use remote controller to control, light brightness will only change from its current brightness rather than remote controller s current setting brightness. Model Number ASD-CELP5H GTIN 12 8192121611 THE WALL TYPE REMOTE CONTROLLER: Turn on Turn off A A Lights code matching combination keys Pressing the buttons ON + OFF simultaneously to keep remote controller s indicator light always on, trun on the light for 2 Seconds then loosen the combination keys, matching code finished.matching code with many lights at the same time is available. Brightness adjustment Press the CCT button, color temperature will circularly change among 3K/35K/4K/5K.After shutting down it will save the current color temperature. The matching method of handhold remote controller and walltype remote controller: NO Grouping 1 2 3 4 5 1 2 3 4 All Hand-hold controller 1 + ID 2 + ID 3 + ID 4 + ID ALL + ID Wall-type controller After 1 Seconds of each operation, it will enter the standby power saving mode. If you need to adjust again, please press the ON button,it works after the indicator flashes. Model Number ASD-CELP5W GTIN 12 819212164 E-mail: orders@asd-lighting.com WebSite: www.asd-lighting.com Phone: 781-739-3977 Fax: 339-52-897
INSTALLATION GUIDE IMPORTANT SAFETY INFORMATION: Please read all the instructions below before installation. Make sure that the supply voltage corresponds to the rated product voltage. The product is designed for indoor use only. RECESSED MOUNT 1. Choose the ceiling panel where you want to install the product, and remove it. For convenience, move adjacent ceiling tiles. 2. Fix the LED Panel into the ceiling: raise up the product above the bar, then place it on T-bars. 3. Secure the panel with the grid as shown in the picture. Connect wires as shown in electrical schematic diagram above. 4. Return the adjacent ceiling tiles to their places. 5. Turn on the main power. Installation is finished. Compatible with grid size Two bend points for all four tabs Ensure the tab is securely attached to the grid 15/16" Slot T 15/16" Tegular SURFACE MOUNT Wall/ceiling mount: 1. Put the pieces of frame to any horizontal surface. Connect these 3 pieces of the frame to the ceiling using four screws. 2. Connect the panel wires as shown in electrical schematic diagram. Attach the fourth piece and secure with screws. 3. Turn on the main power. Installation is complete. Accessories for surface mount are sold separately. FRAME FOR SURFACE MOUNTING ORDERING INFORMATION: GTIN 12 Model Number Panel Size 85996153 ASD-FELP 2x2 8599615339 ASD-FELP24 2x4 Connect three pieces together with screws (included) Insert the panel into the frame formed by three connected pieces WebSite: www.asd-lighting.com Fax: 339-52-897
RECESSED SHEETROCK MOUNT 1. Following the picture above, slide part B into the inboard side of parts C and A as shown. 2. Place assembled frame into a ceiling opening and add steel wires for support as pictured below. B A A - End/intermediate Rail B - Corner Angle C - Side Rail C B A C Corner angle on inside of end and side rails Steel wire Note: For best results, attach supporting steel wires going into the ceiling to sides of frame after assembly End rail can be used as intermediate rail for tandem row After wiring fixture, carefully slide it through ceiling opening, rotate and drop fixture into place. Accessories for recessed sheetrock mount are sold separately. FRAME FOR RECESSED SHEETROCK MOUNTING ORDERING INFORMATION: GTIN 12 Model Number Panel Size 855296393 ASD-FDW-ELP 2x2 8576217 ASD-FDW-ELP24 2x4 SUSPENDED MOUNT (only for 2x2 and 1x4 LED Edge-Lit flat panels): 1. Make sure that the ceiling can hold the weight of the LED panel and install ceiling brackets suitable to support the weight of the LED panel. Affix cables. 2. Connect the wires as shown in electrical schematic diagram. 3. Attach the suspended cables to the bends at the edges of the LED flat panel. 4. Turn on the main power. Installation is finished. Accessories Set х 12 х 12 х 4 х 4 х 4 Accessories for suspended mount are sold separately. CEILING HANGING SET ORDERING INFORMATION: GTIN 12 Model Number Suspended cables lenghs 85996158 ASD-CHS4 4 ft (1 mm) 8552965 ASD-CHS6 6 ft (3 mm) WebSite: www.asd-lighting.com Fax: 339-52-897
LED Edge-Lit Flat Panels CCT Adjustable ORDERING INFORMATION LED EDGE-LIT PANEL CCT ORDERING INFORMATION: Model Type Watts UPC GTIN Product Code Pcs in one Carton Carton Size Carton Weight ASD-ELP5-D27CC-STD 2х2 27 W 8192121154 192121151 21.17 2 24.6"x24.6"x2.76" 17.49 lbs ASD-ELP5-D27CC-PRM 2х2 27 W 8192121178 192121175 21.172 2 24.6"x24.6"x2.76" 17.49 lbs ASD-ELP5-24D4CC-STD 2х4 4 W 8192121161 192121168 21.171 2 24.6" x 48.6"x 2.76" 32.23 lbs ASD-ELP5-24D4CC-PRM 2х4 4 W 81921215 1921212 21.173 2 24.6" x 48.6"x 2.76" 32.23 lbs WebSite: www.asd-lighting.com Fax: 339-52-897