L P Linn-Pumpen GmbH. Electric-gear-pumps series FKM

Similar documents
PUMPS FOR INDUSTRY. The Vertical Pump Specialists CONTENTS: Introduction & User List. Product Overview. Vertical Process Pumps...

SERIES 1300 Quality Design Features Assure Long, Trouble-Free Service

Standard Circulating Pumps

Screw-Type Flow Meter SVC

Customised Solutions. grundfos industry

Screw-Type Flow Meter SVC

BARE SHAFT PUMPS AND MOTOR PUMPS

Standardised EN 733 centrifugal pumps

HANKIA. DSV type. Single stage,vertical Axially split case double suction pump

RA /2.95. Gear Pump Model G2 (Series 4X) For Flange Mounting with SAE threaded Ports. Functional description. Symbols

Asynchronous motors. 5/48 Permissible combinations of mechanical designs for 1PL6 motors,

Screw-Type Flow Meter SVC

CR, CRN high pressure

1.7 Z 414-A LUG TYPE BUTTERFLY VALVE Z 414-A.

Pipe fittings and flanges, sockets for bayonet locks

LCC Pump Series - Wear Resistant, High Performance Slurry Pumps

TD End-Suction Pumps. Operating data Flow rates up to 300 l/sec Head up to 160 metres Temperature 20 0 C to C

Standard Circulating Pumps

L P Linn-Pumpen GmbH. Submersible Vertical Electric pumps. SVI Series. with high efficiency PLM motors. SVI Series MARKET SECTORS INDUSTRIAL, CIVIL.

1.2 Z 014-A LUG TYPE BUTTERFLY VALVE Z 014-A TECHNICAL DATA

2CP. Centrifugal twin-impeller pumps

1.4 F 012-A DOUBLE FLANGED BUTTERFLY VALVE F 012-A TECHNICAL DATA

CR, CRN high pressure

Data sheet: Wilo-Stratos 40/1-8

Submersible Pumps. Pumping Solution. 50 Hz

Data sheet: Wilo-Stratos 50/1-9

Data sheet: Wilo-Stratos 50/1-10

Data sheet: Wilo-Stratos 30/1-8

SERVICE PARTS MANUAL

Stainless Steel Submersible Pumps DATA BOOKLET. ISO 9001 Company. 60 Hz. Pumping Solution

Technical Specification _5.0. Concertor N/EA/DP

FEATURES APPLICATIONS OPERATING DATA MATERIALS OF CONSTRUCTION. Flood control

Close-coupled centrifugal pumps

Data is only for informational purpose. All specifications are subject to change without notice.

The most common variable when using linear drives is wheter the spindles are driven directly or via toothed-belt. Spindle 16 mm.

ZMD ZMDV. AXIALLY SPLIT, ONE-STAGE, BETWEEN-BEARINGS PUMPS 50/60 Hz. High reliability and efficiency. Wide range of material options

Product Overview. Product Overview. How To Order. Flange Input - Shaft Output Right Hand Output. Flange Input - Shaft Output.

WAFER TYPE BUTTERFLY VALVE Z 011-A

WAFER PATTERN BUTTERFLY TYP Z 011-A

Type. Facts. 441, 442 Full nozzle DIN. Flanged Safety Relief Valves spring loaded. The-Safety-Valve.com. Metric Units LWN E

SERVICE PARTS MANUAL

1.1 Z 011-A WAFER TYPE BUTTERFLY VALVE Z 011-A TECHNICAL DATA

MPreC - Pressure Relief Device Order specification sheet

RSK. Wafer Type Check Valve. Construction. Features. Advantages

DIP. Spare parts list. Centrifugal pumps 25, 25-US, 35, 35-US, 65, 65-US Atlas Copco Construction Tools AB No c

Balancing valve PN 16 and PN 25 DN

More than safety. Precision Multiple Limit Switches

Shaft Seal. Accessories

4" MULTISTAGE CENTRIFUGAL SUBMERSED PUMPS COMPLETE WITH MOTOR

VESSEL FUEL MEASUREMENT & MANAGEMENT SYSTEM (VFMMS)

SUBMERSIBLE PUMPS SEWAGE RANGE

shop online:

Thermal oil. Hot Water Pumps

JVMG* *NSF 61/Annex G Certification and Compliance with State Codes does not apply to JVMG Models

Compact Bellows Pumps

PRESSURE RELIEF DEVICE ORDERING SPECIFICATIONS.

Electromechanical pressure switches

Limit switch attachments

USER MANUAL. Electrical Part-turn Valve Actuators. Rev 5.3 / March 2018 EQS ID 1193 QT 250 and QT Ex Actuator

PACO PUMPS PACO INACTIVE MODELS DRY PIT NON-CLOG REPLACEMENT PARTS GUIDE TYPES NCF, NCP, NCH, NCVU & NCU WITH 5-DIGIT MODEL NUMBERS. D2b.

Level sensor Stainless steel version Model RLT-1000, for industrial applications

Series 100. Mechanical Switches Contents. Series 100 Multiple Position Switches

2-PORT SEAT VALVES PN16 WITH FLANGED CONNECTIONS STAZ-16, STBZ-16, STCZ-52 DATASHEET

Metal Debris Sensor Manual. Index. 1. Brief Introduction. 2. Main Technical Parameters

21023, 21025, 2/2 Direct solenoid actuated poppet valves

Lenntech BMP GRUNDFOS DATA BOOKLET. High-pressure piston pumps 50/60 Hz

This is trial version

Ball Screw Actuator Models Advantages:

Mechanical accessories

robust advanced technology Accessories » for mobile and stationary Ringler suction systems

AB13F DOUBLE FLANGED BUTTERFLY VALVES DN50 - DN2000 FEATURES TECHNICAL DATA OPTIONS ACCORDING TO


Lenntech GRUNDFOS DATA BOOKLET. CME 10. Horizontal, multistage centrifugal pumps 50/60 Hz

Electric Actuated Ball Valves 2-way Stainless Steel, Full Port 1/4 to 2 NPT

SUBMERSIBLE VERTICAL ELECTRIC PUMPS SVI SERIES

Multiple Limit Switches, Trip Rails and Trip Dogs

The HELLE Log Turner

Electrical Rotary Drive

Safety Instructions Cerabar S PMP71, PMP75

Model. MITSUBISHI Industrial Sewing Machine Parts Catalog ( ( ( ( ( 170 INDEX Page. From the library of: Superior Sewing Machine & Supply LLC

General Purpose - TEFC. Poultry Fan - TEAO. Auger Drive - TEFC

Electromotoric actuators Torques up to 60 Nm Running times ¹) s. ¹) Predefined by the basic unit (LMV5...)

FxM. ISO7/1 thread, EN331 standard PN40~PN25(5MOP/20MOP) Size:1/4 ~2

Installation Instructions and techn. Documentation

YANMAR N18 AUX.ENGINE SPARES

with extraction and return pipe

Positioning Systems Linear Module

BC 35 DOUBLE-CHANNEL. Submersible pumps. PERFORMANCE RANGE Flow rate up to 1900 l/min (114 m3/h) Head up to 31 m

Standard Bellows Metering Pumps

Mechanically Activated Device for Dry Run Protection in Applications with LORENTZ Solar Pump Systems

"PVL" SERIES. Fixed Displacement - Single PVL1. Up to 5 MPa (730 PSI), 10.6 cm /rev (.647 CU.IN./rev)

Frame, End Brackets, & Conduit Box With Heavy Gauge Steel Fanguard and Non-sparking Fan, for Severe

Multi-axial miniature joystick based on Hall Effect technology

Robots. KUKA Roboter GmbH KR 360 FORTEC. With F and C Variants Specification. Issued: Version: Spez KR 360 FORTEC V2

SOLAR WATER PUMP KIT MODEL: SIS-25HP

PN Gold Mounted Ball Bearings

Pilot operated 2 port solenoid valve (general purpose valve) 100 VAC 50/60Hz 110 VAC 60Hz 200 VAC 50/60Hz 220 VAC 60Hz 12 VDC 24 VDC 48 VDC 100 VDC

ACCESSORIES. Setscrew Ball Bearings LUBRICANTS AIR HANDLING SEALS HOUSING MATERIAL HIGH TEMPERATURE OTHER MODIFICATIONS

COBRA. Spare parts list. Petrol drills and breakers COMBI Atlas Copco Construction Tools AB No c

Axially Split Volute Casing Pump RDLO / RDLO V. Type Series Booklet

Transcription:

Electric-gear-pumps series FKM Construction Self-priming electric-gear-pumps, bellhousing with foot-flange, pump-casing in cast iron. Gear-pumps series FKM with motor-power up to 1,5. Suction- and -ports Whitworth pipe threads - opposite 180. For FKM 5.. SAE-flange optionally. Applications Industrial applications, for example: Lubrication systems, coolant feed in machine tools, heat transfer, test bench and many more. Example of liquids suitable for transport Pure, non-explosive liquids, not corrosive against pump materials, without any solids. The liquids to deliver, must have lubricating characteristics. Oil, mineral oil, synthetic oil, adhesives, sealants, polymers, diesel, paints, inks and many more Operating conditions Liquid temperature: -20 C to +60 C (NBR) Ambient temperature from -20 C up to +40 C operating : max. 80 bar others on request Drive Standard: three-phase asynchronous motor Operation mode: Continuous operation S1 thermal class 155, protection IP 55 Optional: single-phase motor, DC-motors Materials components standard on request sectional drawing bearing cover bushes casing sealing ring casing and cover cast iron- EN-GJL-250 - (GG25) ductile cast iron (GGG40) shaft gears bearing bushes steel Steel, hardened and grinded composite bearings shaft seal sealing ring NBR FPM, PTFE, GLRD, packing gland right direction left direction suction screw O-Ring driven drive coupling mounting motor gear shaft bracket -standard- right/left direction suction suction

Electric-gear-pumps series FKM 310 - FKM 323 FKM 310 FKM 314 FKM 318 FKM 323 (bar) 5 10 15 20 30 40 50 60 70 80 25 7,40 7,35 7,30 7,25 7,20 0,75 35 7,40 7,35 7,30 7,25 7,20 7,10 1,1 50 7,40 7,35 7,30 7,25 7,20 7,10 7,00 1,5 75 7,40 7,35 7,30 7,25 7,20 7,10 7,00 6,90 6,80 6,70 15 10,2 10,15 10,1 0,75 25 10,2 10,15 10,1 10,0 1,1 35 10,2 10,15 10,1 10,0 9,9 9,7 1,5 50 10,2 10,15 10,1 10,0 9,9 9,7 9,4 12 13,20 13,10 13,00 0,75 20 13,20 13,10 13,00 12,80 1,1 30 13,20 13,10 13,00 12,80 12,60 1,5 40 13,20 13,10 13,00 12,80 12,60 12,40 10 16,70 16,60 0,75 15 16,70 16,60 16,50 1,1 25 16,70 16,60 16,50 16,40 16,20 1,5 33 16,70 16,60 16,50 16,40 16,20 16,00 Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side FKM 310 FKM 314 FKM 318 FKM 323 225 157 444 229 17,3 0,75 247 157 462 229 18,4 1,1 271 177 490 237 22,2 1,5 301 177 520 237 24,7

Electric-gear-pumps series FKM 328 bis FKM 333 FKM 328 FKM 333 (bar) 5 10 15 20 30 8 20,30 20,20 0,75 12 20,30 20,20 20,10 1,1 18 20,30 20,20 20,10 20,00 1,5 25 20,30 20,20 20,10 20,00 19,80 6 24,10 24,00 0,75 10 24,10 24,00 1,1 15 24,10 24,00 23,90 1,5 20 24,10 24,00 23,90 23,80 Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side FKM 328 FKM 333 225 157 454 229 17,3 0,75 247 157 472 229 18,4 1,1 271 177 500 237 22,2 1,5 301 177 530 237 24,7

Electric-gear-pumps series FKM 422 bis FKM 438 FKM 422 FKM 426 FKM 430 FKM 434 (bar) 5 10 15 20 30 40 50 5 30,50 0,75 8 30,50 30,30 1,1 12 30,50 30,30 30,10 1,5 15 30,50 30,30 30,10 4 36,20 0,75 6 36,20 36,00 1,1 10 36,20 36,00 1,5 13 36,20 36,00 35,80 3 41,60 0,75 5 41,60 1,1 8 41,60 41,40 1,5 12 41,60 41,40 41,20 2 47,30 0,75 4 47,30 1,1 7 47,30 47,10 1,5 10 47,30 47,10 2 53,00 0,75 4 53,00 FKM 438 1,1 6 53,00 52,80 1,5 9 53,00 52,80 Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side FKM 422 FKM 426 FKM 430 FKM 434 FKM 438 225 157 478 229 22 0,75 247 157 500 229 23,1 1,1 271 177 524 237 26,9 1,5 301 177 554 237 29,4

Electric-gear-pumps series FKM 545 bis FKM 556 FKM 545 FKM 556 3 62,70 0,75 4 62,70 1,1 6 62,70 62,50 1,5 8 62,70 62,50 2 78,10 0,75 3 78,10 1,1 5 78,10 1,5 7 78,10 77,90 (bar) 5 10 15 20 30 40 50 Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side SAE Standard FKM 545 FKM 556 225 157 493 229 23,1 0,75 247 157 515 229 24,2 1,1 271 177 539 237 28,0 1,5 301 177 569 237 30,5

Electric-gear-pumps series FKM 570 bis FKM 590 FKM 570 FKM 590 0,75 2 97,70 1,1 4 97,70 1,5 5 97,70 1,1 3 124,00 1,5 4 124,00 (bar) 5 10 15 20 30 40 50 Oil-Speed: max. 1,5 m/s suction side, max. 4,5 m/s side SAE Standard FKM 570 FKM 590 225 157 528 229 25,1 0,75 247 157 550 229 26,2 1,1 271 177 574 237 30,0 1,5 301 177 604 237 32,5