IP100 Test Report Date 2002-Nov-18 Summary Item No. 1. Description Test Result Basic Function Test 3 1.1 Test Environment Page 1.2.1 EEPROM Function Test 1. EEPROM Read / Write 3 1.2.2 LED Display Test 1. 10/100 Speed LED 2. Link / Activity LED 3 3. Full / Half LED 1.2.3 NWAY Auto-negotiation Test 1. 10 Half Duplex Link Check 2. 10 Full Duplex Link Check 4 3. 100 Half Duplex Link Check 4. 100 Full Duplex Link Check 1.2.4 Force Mode Test (Disable Auto-negotiation) 1. 10 Half Duplex Link Check 2. 10 Full Duplex Link Check 4 3. 100 Half Duplex Link Check 4. 100 Full Duplex Link Check 1.2.5 Register Read/ Write Test 1. PCI Register R/ W 2. NIC CSR Register R/ W 4 3. MII Register R/ W 1.2.6 Internal Loop Back Test 5 1.2.7 External Loop Back Test 1.2.7.1 UTP Loop Back 1.2.7.2 Fiber Loop Back 2. Ping-Pong Function Test Chain mode run 12 hours 6 3. Novell Lantest 7 4. Novell Endurance Test Chain mode run 24 hours 8 5. Novell CC Test Chain mode run 24 hours 9 5 Note -1-
Item No. Description Test Result Page 6. Novell Performance 3 Test 10 7. Microsoft Hardware Compatibility Test (Driver Test) 1. Win2000 HCT (100F) 2. Win-ME HCT (100F) 11 7.1 Environment Setup 7.2 Test Result 7.3 Plug and Play Test 8. Compatibility Test 8.1 Switch (PHY) Compatibility Test 1. D-Link des-1008d 2. Kendin switch 3. IP178A 13 4. Altima 5. IP175 8.2 Smartbits 7410B Compatibility Test 1. Smartbits 15 9. Link Reliability Test 9.1 Plug & Unplug Test 16 9.2 Power On/ Off Test 10. IEEE 802.3 TX Pattern Test 17 11. Wake ON LAN 26 12. Boot Rom Test 26 13. EMI Test 26 Note -2-
1. Basic Function Test 1.1 Test Environment Software Test Program: BGO.EXE (Version: 12/17/2001, file size: 182,758) OS: DOS 6.22 or Pure Win98 DOS Hardware Equipment Model Speed PC * 1 ASUS P2B-F PII-BX 450 LAN Card * 2 Realtek 8139C, IP100 NIC 10/100 Mbps 1.2 Test Condition & Test Result 1.2.1 EEPROM Function Test Setup: EEPROM Read / Write Timing conformance Subject: Make sure EEPROM read/write function is ok. Test Result: 1.2.2 LED Display Test Setup: 10/100 Speed LED Link / Activity LED Full / Half duplex LED Subject: Make sure led indication is normal in different operation mode. Test Result: Condition Result Note 1 No link 2 100M Full 3 100M Half 4 10M Full 5 10M Half -3-
1.2.3 NWAY Auto-negotiation Test Setup: 10 Half Duplex Link Check 10 Full Duplex Link Check 100 Half Duplex Link Check 100 Full Duplex Link Check Subject: Force NIC in different operation mode and check link status. Test Result: Condition Result Note 1 100M Full 2 100M Half 3 10M Full 4 10M Half 1.2.4 Force Mode Test (Disable Auto-negotiation) Setup: 10 Half Duplex Link Check 10 Full Duplex Link Check 100 Half Duplex Link Check 100 Full Duplex Link Check Subject: Force NIC in different operation mode and check link status. Test Result: Condition Result Note 1 100M Full IP100 LED will indicate 100Full, but RLT8139C will be in 100 Half 2 100M half 3 10M full IP100 LED will indicate 10Full, but RLT8139C will be in 10 Half 4 10M half 1.2.5 Register R/W Test Setup: PCI Register Read / Write NIC CSR Register Read / Write MII Register R/ W Subject: Verify Read / Write PCI and CSR register. Test Result: Condition Result Note 1 PCI register Read/Write 2 NIC CSR register Read / Write 3 MII register Read / Write -4-
1.2.6 Internal Loop Back Test Setup: 1. Chain mode run for 4 hours Subject: Run internal loop back test in chain mode. Test Result: Condition Result Note 1 4 hours No Packet Loss 1.2.7 External Loop Back Test 1.2.7.1 UTP External Loop back Test Setup: Use RJ45 connector to connect TX to RX. Chain mode run for 4 hours Subject: Run external loop back test in chain mode. Test Result: Condition Result Note 1 4 hours No Packet Loss 1.2.7.2 Fiber External Loop Back Test Setup: Use a fiber to connect TX to RX. Chain mode ran overnight test Subject: Run external loop back test in chain mode. Test Result: Condition Result Note 1 Approximately 10 hours -5-
2. Ping-Pong Function Test 2.1 Test Environment Server/ Client No. LAN card Mother Board CPU RAM Intel Server IP100 ASUS - TUSL2-C Celeron 128M 1GHz Intel Client 1 IP100 ASUS TUSL2-C Celeron 128M 1GHz Test Program: BGO.EXE (Version: 12/17/2001, file size: 182,758) Cable Length 120m 120m OS: DOS 6.22 or Pure Win98 DOS cross over UTP Client Server 2.2 Test Result Server/ Speed/ Client Duplex Testing Time Result Note Server 100M Full 12 hours No Packet Loss Client 100M Full 12 hours No Packet Loss Server/ Speed/ Client Duplex Testing Time Result Note Server 10M Half 4 hours No Packet Loss Client 10M Half 4 hours No Packet Loss -6-
3. Novell Lantest 3.1 Test Environment Server/ No. NIC card Client IP100 Server1 X2 Realtek Server2 8139D X2 Realtek Client 8139D HUB: D-Link DE-808TP Driver version: 2.0.0 Filename: st201.lan Mother Board GigaBYTE GA-7ZX CPU AMD athlon 1.1 G RAM 128M Cable Length 3m Asus TUSL2-C Celeron 1G 128M 3m A-Open AX4B P4 1.6G 256M 3m Novell LANTest Hub 10Mbps Prot 1 Port 2 Port 3 Network A Network A Network A NIC 2 NIC 1 NIC 1 NIC 2 Device under test Network B Server 2 Server 1 Client OS: Netware 5X OS: Netware 6X OS: Windows 2000 NIC Test Configuration 3.2 Test Result Server/ Client Server1, Server2 Client Result Note -7-
4. Novell Endurance Test 4.1 Test Environment Server/ Cable No. LAN card Mother Board CPU RAM Client Length Server IP100 Asus P4B P4 1.6G 128M 3m Client 1 Intel Giga NIC Rambus Asus P4T/Wol/WOA P4 1.5G 82543GC 128M 3m 2 Intel Giga NIC AMD Atholon MSI K7N420 82543GC 1G 128M 3m 3 Intel Giga NIC AMD AOPEN AK77-PRO 82543GC Atholon 1G 128M 3m 4 Intel Giga NIC ASUS 82543GC TUV4X/533/WOA/ Celeron 1.3G 128M 3m 5 Intel Giga NIC ASUS AMD Atholon 82543GC A7M266/550/WOL/ 1G 128M 3m 6 Intel Giga NIC 82543GC Asus TUSL2-C Celeron 1G 128M 3m 7 Intel Giga NIC 82543GC Asus TUSL2-C Celeron 1G 128M 3m Switch: D-Link DES-1008D Driver version: 2.0.0 Filename: st201.lan Server Switch Client 1 Client 5 Client 2 Client 4 4.2 Test Result Client 3 Server/Client No. Speed/ Duplex Testing Time Result Note Server 100M Full 24 hours No Error Client 1 100M Full 24 hours No Error 2 100M Full 24 hours No Error 3 100M Full 24 hours No Error 4 100M Full 24 hours No Error 5 100M Full 24 hours No Error 6 100M Full 24 hours No Error 7 100M Full 24 hours No Error -8-
5. Novell Copy & Compare Test 5.1 Test Environment Server/ Cable No. LAN card Mother Board CPU RAM Client Length Server IP100 Asus TUSL2-C Celeron 1G 128M 3m Client 1 IP100 A-Open AX4B P4 1.6G 256M 3m Driver version: 2.0.0 Filename: st201.lan cross over UTP Client Server 5.2 Test Result Server/ Speed/ Client Duplex Testing Time Result Note Server 100M Full 24hours No Failure Client 100M Full 24hours No Failure -9-
6. Novell Performance 3 Test 6.1 Test Environment Server/ Cable No. NIC card Mother Board CPU RAM Client Length IP100 Server Asus P4B P4 1.6G 128M 3m Client 1 Intel Giga NIC 82543GC 2 Intel Giga NIC 82543GC 3 Intel Giga NIC 82543GC 4 Intel Giga NIC 82543GC 5 Intel Giga NIC 82543GC 6 Intel Giga NIC 82543GC 7 Intel Giga NIC 82543GC Switch: D-Link DES-1008D Driver version: 2.0.0 Filename: st201.lan Asus P4T/Wol/WOA P4 1.5G MSI K7N420 AOPEN AK77-PRO ASUS TUV4X/533/WOA/ ASUS A7M266/550/WOL/ Asus TUSL2-C Asus TUSL2-C AMD Atholon 1G AMD Atholon 1G Celeron 1.3G AMD Atholon 1G Celeron 1G Celeron 1G Rambus 128M 128M 128M 128M 128M 128M 128M 3m 3m 3m 3m 3m 3m 3m Server Switch Client 1 Client 5 Client 2 Client 4 Client 3 6.2 Test Result Speed/ Maximum Average Server Duplex (K bytes) (K bytes) IP100 100M Full 11387.98 11344.78 Note -10-
7. Microsoft Hardware Compatible Test (HCT) 7.1 Test Environment Server/ Cable NIC card Mother Board CPU RAM Client Length Support device 3 IP100 Server Ethernet card 2 Dlink530 MSI-MS 6398 Intel P4 1.6G 128M 2m Test device 1 IP100 ASUS-P4B266 Intel Client Support device 2 IP100 P4 1.6G 128M 3m Ethernet card 1 Dlink530 OS: Win2000/ Win-Me Driver version 2.5.4.0 LAN cards work at 100M full duplex. Switch: Accton 3008A Switch Domain 1 (test domain): test device 1, support device 2, and support device 3. Domain 2: Ethernet card 1 and Ethernet card 2-11-
7.2 Test Result 7.2.1 Win2000 HCT-100M full duplex Test Condition: OS: Win2000 Driver version 2.5.4.0 LAN cards work at 100M full duplex. Test Result: No. Test item Result Note 1 NDIS Functional Testing 2 NDIS Performance Testing 3 NDIS Stress Testing 7.2.2 Win-Me HCT-100M full duplex Test Condition: OS: Win2000 Driver version 2.5.4.0 LAN cards work at 100M full duplex. Test Result: No. Test item Result Note 1 NDIS Functional Testing 2 NDIS Performance Testing 3 NDIS Stress Testing 7.3 Plug and Play Test Test Condition: Test whether IP100 will automatically setup under all Microsoft Windows Test Results No. OS Result Note 1 Windows 95 No Plug and Play 2 Windows 98 No Plug and Play 3 Windows Me No Plug and Play 4 Windows 2000 Plug and Play Driver is Sundance 1.05 5 Windows XP Plug and Play Driver is Sundance 1.05-12-
8. Compatibility Test 8.1 Switch (PHY) Compatibility Test 8.1.1 Test Environment Master / No. Slave NIC card Mother Board CPU RAM Master 0 SX-7410B Smartbits 2000 Slave IP100 ASUS - Intel TUSL2-C Celeron 1GHz 128M 1 Kendin Switch 2 Marvell Switch Switch Cable Length 130m~2m 130m~2m 3 IC+ 178A 130m~2m 4 D-Link Des1008D 130m~2m 5 IC+ 175 130m~2m Software: 1. Client: BGO/ Rx Tx test, 2. Server: Smart window 7.00.26 Test Criteria: 1.Server: Smartbits send 1,000,000 packets (random data, random length) to Switch. 2. Client: Receive packets from switch, make sure no packet loss Master Switch Slave -13-
8.1.2 Test Result Switch Cable Kendin 5p Marvell 5p IC+ D-Link IC+ length Switch Switch IP178A Des1008D IP 175 130m 120m 110m 100m 90m 80m 70m 60m 50m 40m 30m 20m 10m 2m Note -14-
8.2 Smartbits 7410B Compatibility Test 8.2.1 Test Environment Master / Cable No. NIC card Mother Board CPU RAM Slave Length AMD Master 0 IP100 ASUS K7V 512M K7-800MHz Smartbits 7410B 130m~0m Software: BGO/ Ping Pong test Smartbits: set to be echo mode Test Criteria: Rx 10,000,000 packets, no packet loss Master cross over UTP Smartbits 7410B 8.2.2 Test Result Cable Smart bit length 7410B Note 130m No Packet Loss 120m No Packet Loss 110m No Packet Loss 100m No Packet Loss 90m No Packet Loss 80m No Packet Loss 70m No Packet Loss 60m No Packet Loss 50m No Packet Loss 40m No Packet Loss 30m No Packet Loss 20m No Packet Loss 10m No Packet Loss 2m No Packet Loss -15-
9. Link Reliability Test 9.1 Plug / Unplug test 9.1.1 Test Environment IP100 UTP UTP Relay ( Relay on/off automatically ) D-Link DES-1008D switch Test Time: over night Test Criteria: Link is ok if relay is on. 9.1.2 Test Result 9.2 Power On / Off Test 9.2.1 Test Environment IP100 UTP D-Link DES-1008D switch ( power on /off ) Test Criteria: Link is ok after switch power on/ off 100 times 9.2.2 Test Result -16-
10. IEEE 802.3 Transmit Pattern Test 10.1 100BASE-T Test Result Measured Item Specification Measured Value Measured Result (1) Transmit Eye Diagram With Waveform Limit With Waveform Limit (2) Transmit Jitter < 1.4 ns 440 ps (3) Differential Output Voltage (+ Vout) 0.95V~1.05V + 960mv (4) Differential Output Voltage (- Vout) 0.95V~1.05V - 960mv (5) Rise and Fall Times [0]~[1] 3~5 ns 3.797ns~4.201ns (6) Rise and Fall Times [1]~[0] 3~5 ns 3.951ns~4.593ns 10.2 10BASE-T Test Result Measure Item Specification Measure Value Measure Result (1) Idle Pulse Waveform Within Waveform limit With Waveform Limit (2) Idle Pulse Waveform with 100m UTP3 cable Within Waveform limit With Waveform Limit (3) Link Pulse Waveform Within Waveform limit With Waveform Limit (4) Link Pulse Waveform with Within Waveform limit With Waveform Limit 100m UTP3 cable (5) Transmit Waveform Jitter < + / - 8ns 3 ns (6) Transmit Waveform Jitter with100m UTP3 cable < + / - 8ns 5 ns (7) Transmit Waveform with 100m UTP3 cable Within Waveform limit Within Waveform limit (8) Peak Differential Output Voltage (50 ns data packet) (9) Peak Differential Output Voltage (100 ns data packet) 2.2~2.8 V 2.26 V 2.2~2.8 V 2.26 V -17-
10.3 Measured Waveform: 10.3.1 100Base-T: (1) Transmit Eye Diagram: (2) Transmit Jitter: -18-
(3) Differential Output Voltage (+Vout): (4) Differential Output Voltage (-Vout): -19-
(5) Rise and Fall Times ([0]~[1]): (6) Rise and Fall Times ([0]~[-1]): -20-
10.3.2 10 Base-T: (1) Idle Pulse Waveform: (2) Idle Pulse Waveform With 100m UTP3 Cable: -21-
(3) Link Pulse Waveform: (4) Link Pulse Waveform With 100m UTP3 Cable -22-
(5) Transmit Waveform Jitter: (6) Transmit Waveform Jitter With 100m UTP3 Cable: -23-
(7) Transmit Waveform With 100m UTP3 Cable: (8) Peak Differential Output Voltage (50ns) -24-
(9) Peak Differential Output Voltage (100ns data packet) -25-
11. Wake ON LAN 11.1 Item Magic Packet Result 12. Boot Rom Test 12.1 Item Boot Rom Test Result 13. EMI Test 13.1 Item EMI Class B Test Result -26-