SIMULATION OF THE UT INSPECTION OF PLANAR DEFECTS USING A GENERIC GTD-KIRCHHOFF APPROACH

Similar documents
GENERIC GTD-KIRCHHOFF SCATTERING MODEL FOR THE ULTRASONIC RESPONSE OF PLANAR DEFECTS

RECENT MODELLING ADVANCES FOR ULTRASONIC TOFD INSPECTIONS

Influence of Stress Corrosion Crack Morphology on Ultrasonic Examination Performances

VALIDATION OF THE SIMULATION SOFTWARE CIVA UT IN SEPARATED TRANSMIT/RECEIVE CONFIGURATIONS

UT phased array inspection of turbines

NEW FEATURES FOR PHASED ARRAY TECHNIQUES INSPECTIONS : SIMULATION AND EXPERIMENTS

Simulation of NDT Inspection in 3D Elastic Waveguide Involving Arbitrary Defect

SIMULATION OF ULTRASONIC EXAMINATIONS USING SURFACE ACOUSTIC WAVES

Validation of aspects of BeamTool

APPLICATION OF ULTRASONIC BEAM MODELING TO PHASED ARRAY

ELECTROMAGNETIC diffraction by perfectly conducting

ULTRASONIC INSPECT ABILITY MODELS FOR JET ENGINE FORGINGS

ULTRASONIC WAVE PROPAGATION THROUGH NOZZLES AND PIPES WITH

ULTRASONIC NONDESTRUCTIVE TESTING OF COMPLEX COMPONENTS WITH FLEXIBLE PHASED-ARRAY TRANSDUCERS

INTRODUCTION TO The Uniform Geometrical Theory of Diffraction

UT inspection of welding joins: issues and contribution of CIVA simulation tools

INSPECTION USING SHEAR WAVE TIME OF FLIGHT DIFFRACTION (S-TOFD) TECHNIQUE

Probability of Detection Simulations for Ultrasonic Pulse-echo Testing

Validation of the simulation of pipeline girth welds PA UT inspections

NDT OF SPECIMEN OF COMPLEX GEOMETRY USING ULTRASONIC ADAPTIVE

Simulation in NDT. Online Workshop in in September Software Tools for the Design of Phased Array UT Inspection Techniques

Influence of seamless pipes wall thickness variation for the effectiveness of Automated Ultrasonic Testing

Simulation of ultrasonic guided wave inspection in CIVA software platform

COMPUTATIONALLY EFFICIENT RAY TRACING ALGORITHM FOR SIMULATION OF TRANSDUCER FIELDS IN ANISOTROPIC MATERIALS

UMASIS, AN ANALYSIS AND VISUALIZATION TOOL FOR DEVELOPING AND OPTIMIZING ULTRASONIC INSPECTION TECHNIQUES

Fundamentals of the Physical Theory of Diffraction

RA Y -MODELING FOR COMPUTER SIMULATION OF ULTRASONIC TESTING

A Study of Time-of-Flight Diffraction Technique Using Photoelastic Visualisation

Model-Based POD Studies. Objective: Develop a list of model-based POD studies that have been completed to date

VALIDATION 3D RAY TRACING FOR UT EXAMINATION OF THE NOZZLE

Corrosion detection and measurement improvement using advanced ultrasonic tools

Phased-array applications for aircraft maintenance: fastener-hole inspection

MULTI-MODE TFM IMAGING WITH ARTEFACT FILTERING USING CIVA UT FORWARD MODELS

Wave Propagation Correlations between Finite Element Simulations and Tests for Enhanced Structural Health Monitoring

REAL-TIME ADAPTIVE IMAGING FOR ULTRASONIC NONDESTRUCTIVE TESTING OF STRUCTURES WITH IRREGULAR SHAPES

ADVANCED PHASED ARRAY TECHNOLOGIES

Using asymptotic methods to compute diffracted pressure by curved surfaces

Simulation Supported POD Methodology and Validation for Automated Eddy Current Procedures

Phased Array Assisted Manual Nozzle Inspection Solution with Data Archiving Capability

Advanced ultrasonic 2D Phased-array probes

ULTRASONIC TESTING AND FLAW CHARACTERIZATION. Alex KARPELSON Kinectrics Inc., Toronto, Canada

Sizing in Phased Array Technique using Diffraction and Amplitude Displacement

RECONSTRUCTION OF A PISTON TRANSDUCER BEAM USING MULTI-GAUSSIAN

Developments in Ultrasonic Phased Array Inspection III

Applications of Phased Array Techniques to NDT of Industrial Structures

Sizing and evaluation of planar defects based on Surface Diffracted Signal Loss technique by ultrasonic phased array

UMASIS, an analysis and visualization tool for developing and optimizing ultrasonic inspection techniques

The geometry of reflection and refraction Wave conversion and reflection coefficient

THIS paper presents early results of new tracing algorithm

Ultrasonic Detection and Sizing of Off-Axis Flaws in Pressure Tubes. Alex Karpelson. 3rd International COG/CINDE In-Service Inspection NDE Conference

Recent advances in aerospace inspection with ultrasonic phased arrays

Advanced Ultrasonic 2D Phased-Array Probes

Validation of simulation tools for ultrasonic inspection of austenitic welds in the framework of the MOSAICS project

ECNDT Poster 7

NUMERICAL SIMULATION OF SELF-FOCUSING OF AN ARRAY ON. Center for Quality Engineering and Failure Prevention Northwestern University Evanston, IL 60208

GPU ACCELERATED TOTAL FOCUSING METHOD IN CIVA

S. J. Wormley, B. P. Newberry, M. S. Hughes D. K. Hsu, and D. O. Thompson Center for NDE Iowa State University Ames, Iowa 50011

axis, and wavelength tuning is achieved by translating the grating along a scan direction parallel to the x

Development of efficient hybrid finite element modelling for simulation of ultrasonic Non-Destructive Evaluation

High Resolution Phased Array Imaging using the Total Focusing Method

Development of a robotic nozzle inspection with a flexible transducer array

Use of Monte-Carlo Methods to Derive Quantitative Probability of Defect Detection Data

The Uniform geometrical Theory of Diffraction for elastodynamics: Plane wave scattering from a half-plane

DETERMINATION OF SHORT CRACK DEPTH WITH AN ACOUSTIC MICROSCOPE

2. Fundamental Equations of Elastodynamic Finite Integration Technique

SIZING THE HEIGHT OF DISCONTINUITIES, THEIR CHARACTERISATION IN PLANAR / VOLUMETRIC BY PHASED ARRAY TECHNIQUE BASED ON DIFFRACTED ECHOES

Finite Element Modeling and Multiphysics Simulation of Air Coupled Ultrasonic with Time Domain Analysis

Adaptive Focusing Technology for the Inspection of Variable Geometry. Composite Material

SIMPOSIUM : Simulation Platform for Non Destructive Evaluation of structures and materials

Jean Michel Puybouffat 1, Dionisio Agostinho 2 ABSTRACT

High Resolution Phased Array Imaging using the Total Focusing Method

Coupling of surface roughness to the performance of computer-generated holograms

P052 3D Modeling of Acoustic Green's Function in Layered Media with Diffracting Edges

A FLEXIBLE PHASED ARRAY TRANSDUCER FOR CONTACT EXAMINATION OF COMPONENTS WITH COMPLEX GEOMETRY

Simulation platform for NDE

New tools in CIVA for Model Assisted Probability of Detection (MAPOD) to support NDE reliability studies

DEVELOPMENT OF GEOMETRICAL MODELS OF HARD-ALPHA INCLUSIONS

Shaft inspection using Phased-Array compared to other techniques

The Interface Fresnel Zone revisited

Photoelastic Visualisation of Ultrasonic Pulse Interactions Part 1: Compression mode in a solid

DIFFRACTION 4.1 DIFFRACTION Difference between Interference and Diffraction Classification Of Diffraction Phenomena

COMPLEX CONTOUR ULTRASONIC SCANNING SYSTEM APPLICATION AND TRAINING

Time domain construction of acoustic scattering by elastic targets through finite element analysis

Elastic Wave Propagation in Polycrystalline Materials using Ray Tracing Model

Modeling the Acoustic Scattering from Axially Symmetric Fluid, Elastic, and Poroelastic Objects due to Nonsymmetric Forcing Using COMSOL Multiphysics

Flexible EC Array Probe for the Inspection of Complex Parts Developed Within the European VERDICT Project

Dynamical Theory of X-Ray Diffraction

Aspects of RF Simulation and Analysis Software Methods. David Carpenter. Remcom. B = t. D t. Remcom (Europe)

High Frequency Wave Propagation and Discrete Geodesics

Supplementary Figure 1 Optimum transmissive mask design for shaping an incident light to a desired

Phased Array inspection system applied to complex geometry Carbon Fibre Reinforced Polymer parts

Phase Reversed Image Reconstruction Method of. Industrial Ultrasonic CT

SAFT-Reconstruction in ultrasonic immersion technique using phased array transducers

Federal Institute for Materials Research and Testing (BAM), Unter den Eichen 87, Berlin, Germany

Saurabh GUPTA and Prabhu RAJAGOPAL *

RELIABILITY OF THE FEM CALCULATIONS OF THE FRACTURE MECHANICS PARAMETERS

Revised Sheet Metal Simulation, J.E. Akin, Rice University

Shaft Inspection using Phased Array Compared to other Techniques

3D modeling and experimental validation of flaw responses provided by Magnetic Flux Leakage NDT system inspecting ferromagnetic pipes

Ch. 22 Properties of Light HW# 1, 5, 7, 9, 11, 15, 19, 22, 29, 37, 38

Transcription:

ound M athematics L td. SIMULATION OF THE UT INSPECTION OF PLANAR DEFECTS USING A GENERIC GTD-KIRCHHOFF APPROACH V. DORVAL, M. DARMON, S. CHATILLON, L. FRADKIN presented by A. LHEMERY CEA, LIST, France Sound Mathematics, UK Review of Progress in QNDE Boise, July 04

OUTLINE OF THE PRESENTATION Context Crack scattering models Physical Theory of Diffraction Results

CONTEXT Modeling of the defect responses with CIVA UT Several types of defects and interaction models are available in CIVA Kirchhoff Voids flaws : cracks like or volumic shapes. Specular reflexion GTD (Geometrical Theory of Diffraction) Diffraction by edges SOV (Separation Of Variables) Spheres, SDH (Modified) Born Solid Inclusions For cracks: Kirchhoff is best suited for specular echoes, GTD is best suited for diffraction echoes Choosing beween the two models requires expertise In some cases, both specular and diffraction echoes are required CIVA : development of the Kirchhoff+GTD model, based on the Physical Theory of Diffraction Specular echo Edge diffraction

CRACK SCATTERING MODELS Modeling planar crack echoes in NDT experiments Reciprocity formalism for the expression of echoes: δγ ba = 4P v T v T Scattering coefficients can be derived from it: S F n ds B. A. Auld, "General electromechanical reciprocity relations applied to the calculation of elastic wave scattering coefficients, Wave Motion, 979. V R = KsV 0 V 0 A The Thompson-Gray measurement model, as described by L. Schmerr and Jung-Sin Song, "Ultrasonic Nondestructive Evaluation Systems, Springer Science, 007. For planar cracks, only the Crack Opening Displacement (COD) needs to be n calculated: δγ ba = v 4P T v T n ds = COD T S F 4P n ds S F + The Kirchhoff and GTD models are widely used to model crack echoes : field from the emitter, in the presence of defect : field from the receiver, in the absence of defect v: particular velocity T: stress n: normal to the surface P: emitter power K: proportionnality factor not detailed here s: reference signal : incident field : observed field V: amplitude of the plane wave that serves as an approximation to the field A: scattering coefficient, dependent on the directions and nature of the plane waves n S F + S F -

COD CRACK SCATTERING MODELS Kirchhoff approximation Also know as tangent plane approximation Field on the surface of the defect assumed to be locally equal to the field created by the reflection of waves on a tangent plane Tangent plane Incident L wave Reflected T wave Reflected L wave Defect surface Illustration of the Crack Opening Displacement in the Kirchhoff approximation in a canonical case: 3 x=- Incident unit plane wave x=.5.5 Advantages and drawbacks: 0 - - 0 Position Any defect geometry Incident field variations along the defect x No effect of the edge inaccuracies in edge diffraction

CRACK SCATTERING MODELS Geometrical Theory of Diffraction Aims at modeling crack edge diffraction Adds diffracted rays compared to geometric rays J. B. Keller, Geometrical Theory of Diffraction, Journal of the Optical Society of America,96. D: cylindrical wave 3D: conical wave Based on the asymptotic evaluation of an exact solution for a semi-infinite crack Edge diffraction x x x Field variations along the defect Complex geometries Regularity of coefficients: divergences

COD CRACK SCATTERING MODELS Geometrical Theory of Diffraction Divergences occur in the specular and transmission directions The Crack Opening Displacement corresponding to the GTD model is the exact solution for a semi-infinite crack 3 Penumbra zones 50 0 0 40 90.5.5 80 0 70 Acoustic case 60 300 inc Exacte GTD 30 330.5 x=- Incident unit plane wave.5 0 Illustration of the exact solution for the COD of a semi-infinite crack. V. A. Borovikov, "Uniform Stationary Phase Method, IEE: London UK, 994. - - 0 Position

CRACK SCATTERING MODELS Overcoming the limitations of Kirchhoff and GTD Several methods have been developed with the aim and modeling tip diffraction without the coefficient divergence of GTD (particularly for electromagnetic waves) The Uniform Asymptotic Theory of Diffraction relies on fictitious rays to avoid the divergences encountered by GTD R. M. Lewis and J. Boersma, Uniform asymptotic theory of edge diffraction, Journal of Mathematical Physics,969. The Uniform Theory of Diffraction yields coefficients that avoid divergences thanks to a smoothing function that intervene in the calculations R. G. Kouyoumjian and P. H. Pathak, A uniform geometrical theory of diffraction for an edge in a perfectly conducting surface, IEEE Trans. Antennas Propag.,974.. The Physical Theory of Diffraction can be interpreted as combination of Kirchhoff and GTD P. Y. Ufimtsev, Fundamentals of the Physical Theory of Diffraction, John Wiley & Sons., 007. Retains advantages of Kirchhoff (easily accounts for complex flaw geometries and for variations of the incident field over the surface) Relatively easy to implement if Kirchhoff and GTD are already available

PHYSICAL THEORY OF DIFFRACTION Physical Theory of Diffraction: principle Can be written as a combination of Kirchhoff, GTD, and a correction Kir D D PTD GTD Kirch U x U x x x e ikr kr V. Zernov, L. Fradkin, and M. Darmon, "A refinement of the Kirchhoff approximation to the scattered elastic fields," Ultrasonics, vol. 5, no. 7, pp. 830-835, 0 Kirchhoff + corrected GTD The Kirchhoff contribution stems from an integration over the entire surface of the defect The GTD contribution stems from an integration over the edges Uniform scattered field (no divergence): Specular reflexion Diffraction U PTD x U Kir x U PTD x D GTD αβ x eikr kr UGTD x

COD COD COD COD COD PHYSICAL THEORY OF DIFFRACTION Physical Theory of Diffraction: interpretation Interpretation as a decomposition of coefficients for a D planar crack crack GTD Edge Kirchhoff Edge + Kirchhoff Surface + GTD Edge Kirchhoff Edge = PTD Interpretation as a decomposition of Crack Opening Displacements - 3.5.5 0 - - 0 Position 3.5.5 0 - - 0 Position.5 3.5 COD 0.5 - - 0 + + Position = 3.5 0 - - 0 Position.5-3.5 0 - - 0 Position 3.5.5 0 - - 0 Position Better behavior then Kirchhoff at the edges, no infinite quantities to integrate

PHYSICAL THEORY OF DIFFRACTION Physical Theory of Diffraction: results Comparison between PTD, GTD and an exact solution 0 90.5 60 Kir D D PTD GTD Kirch U x U x x x e ikr kr 50.5 30 Specular reflexion Diffraction U PTD x U Kir x U PTD x D GTD αβ x eikr kr UGTD x 80 0 0 Exact UTD PTD GTD 330 PTD agrees with Kirchhoff and with GTD in their respective validity domains 40 70 300 As expected, the PTD coefficients do not diverge, whereas the GTD coefficients do

Physical Theory of Diffraction: implementation. Meshing of the defects PHYSICAL THEORY OF DIFFRACTION. Computation of the field at each mesh point, for each probe and each mode (fields are computed using a paraxial ray method known as the pencil method and approximated by plane waves) 3. Application of the edge diffraction coefficient (GTD-KirchhoffEdge) at the border of the defect, application of the KirchhoffSurface coefficient on the surface 4. Sum of the contributions and convolution by the reference signals GTD Edge Kirchhoff Edge + Kirchhoff Surface = PTD

RESULTS Comparison between CIVA results for PTD and a FEM code P waves, direct echos, various angles of incidence FEM (Athena) Zoom Same maximum for Kirchhoff, PTD and FEM (specular reflexion) Agreement between PTD and FEM for diffraction: PTD corrects Kirchhoff

RESULTS Comparison between CIVA results for PTD, Kirchhoff and GTD P waves, direct echos, various angles of incidence PTD=Kirchhoff PTD=GTD Diffraction 45 Specular 90 PTD KA GTD Signal confirms that PTD behaves as expected: agrees with Kirchhoff for specular and with GTD for diffraction

RESULTS Unfavorable case: shear waves, small defect 5MHz specular direction () () Agreement for specular direction Interferences of head waves / diffracted waves near the critical angle (around 35 ) Increased performances for larger cracks (lesser interferences)

Time of flight Time of flight RESULTS Corner echoes of rectangular backwall breaking notches 45 P-waves, breakwall notches : Corner effect P Corner effect S Modes conversion Experiment Scanning Corner effect P Diffraction P PP : Diffraction P P-P-P : Corner effect echo, no conversion Mixed corner echo Corner effect S 5mm x mm 5mm x 5mm 5mm x 0mm 5mm x 0mm S-S-S : Corner effect echo, no conversion Simulation S-P-P : mixed corner effect echo R.Raillon et al., UT benchmark, Rev. Of Prog. QNDE 00 Corner echoes (specular) not modified compared to the 00 benchmarck

CONCLUSION Summary A combination of the Kirchhoff and GTD models based on the Physical Theory of Diffraction allows combining advantages: accurate prediction of edge diffraction (GTD) accurate prediction of corner and specular echoes (Kirchhoff) Implemented in CIVA extends the validity domain of the simulation Removes the need to choose between Kirchhoff and GTD Perspectives Improvement of the Kirchhoff+GTD model around the critical angle: accounting for head waves (collaboration with Sound Mathematics Ltd.) Improvement of the modeling of defect echos in CIVA: More detailed description of the field in defect interaction (avoiding the plane wave approximation) Coupling with numerical methods