CELL SITE INFRASTRUCTURE SOLUTIONS Creative Solutions for the Mobile Evolution
Macro Tower Micro Pico Base Station COW / COLT Roof Top Typical Macro Tower Application Typical COW / COLT Application Amphenol Fiber Optic Products
Harsh Environment Fiber Connectors and Cable Assemblies - ARRC Available in 2 fiber or 4 fiber plug and receptacle for an IP68 quick connections. AARC uses LC style 1.25mm ceramic ferrules to provides superior optical performance. Factory terminated AARC plug assemblies are available in all lengths. Receptacle assemblies are available with indoor style zipcord or outdoor breakout cable making it suitable for both in-line and enclosure mounted applications for quick and simple installation on equipment. AARC is exceptionally suited for WiMax, LTE, 3G/4G wireless, and base station applications. Harsh Environment Fiber Connectors & Cable Assemblies PT/LC & PT/MPO This connector family leverages the proven MIL spec 26482 connector system to provide an environmental seal and mechanical protection for 2 fiber duplex LC style or MPO connections and exceeds the IP 67 requirement. Available with either a quick mate bayonet interface or anti-vibration threaded interface, the PT series provides a simple and reliable sealed connection. The PT/LC Receptacle accepts standard simplex or duplex LC assemblies to provide cost effective connections to active devices with LC pigtails or industry standard LC jumpers. Harsh Environment Fiber Connectors & Cable Assemblies TxRx The TxRx Connector family uses common housing and receptacle for Optical LC or MPO based and Copper RJ-45 based interconnect. It is designed to allow direct connection to commercially available LC, MPO and RJ-45 transceivers, with no internal jumper. TxRx Provides ample float for proper alignment and mating to the active device. The mechanical seal is designed for the harsh environment and exceeds the IP67 dust and water protection. Available for Single mode or Multimode optical fiber and Cat 5, Cat 5E, or Cat 6 copper cabling. Multi Fiber Cable Assemblies For Outdoor and Indoor Applications Multi-fiber assemblies are becoming increasing popular due to the high density applications in the marketplace. Assemblies are available in various fiber counts and utilize a variety of connectors. Cable is offered in distribution (900µm tight buffered), breakout, ribbon, Indoor/outdoor, Armored, ONFR, LSZH, CLT, and loose tube configurations in both Singlemode and Multimode options. Available for most industry standard and RRH connectors are available and customized breakout types and lengths. Hybrid Cables and Cable Assemblies Amphenol Fiber Optic Products and Times Fiber team up to expand upon the customized cable assembly solutions for fiber-to-the-antenna. Cable assemblies are factory terminated, breakout sealed and put on pallets for simplified cell site deployment. PowerOptX hybrid cables by Times Fiber comes in a variety of fiber counts, types and with power conductor choices and quantities, ranging from 14 to 3/0 AWG up to 10 count. Jacket types and shielding options can be specified to meet customer's most demanding applications. Creative Solutions for the Mobile Evolution
Amphenol Demarcation and Aggregation Box (ADAB) Fiber Only The ADAB line allows for the maximum flexibility by designed. It allows for all methods of fiber demarcation including plug and play or splice. The box solution allows for internal connectorization using industry standard glands and optical connectors (SC, LC, MPO, etc.) or external connectorization using harsh environment connectors (PT/LC, PT/MPP, AARC, TxRx, etc.). The Flexibility also allows for any mix depending on the feeder side and drop side needs, and application requirement. While flexible, the ADAB line has superior cable management and me- Amphenol Demarcation and Aggregation Box (ADAB) Hybrid The latest addition to the ADAB line is designed to optimize the RRH deployment with an eye to reduce the Total Cost of Ownership (TCO). The Hybrid box has the same flexibility of the fiber box, with the ability to incorporate power connectors, power distribution, breakers, grounding, and lightning protection within the same enclosure. In addition, the ADAB Hybrid solution is designed to allow for hybrid or discreet cable feed and drops, allowing for the maximum flexibility to address all cell site applications. While flexible, the ADAB line has superior cable management Fiber Management Panels Amphenol FiberMOD Rack Patch Panels provide a convenient point for patching and managing fiber optic cables. The modular and high density design of the FiberMOD panels make them ideal in Backhaul and Base Station applications to help manage equipment adds and changes. The patch panels provide easy access to the cable assemblies, optimized cable routing features, and bend radius protection for the fibers. The panels are also available with MPO cassettes to help speed up deployments. Passive Optical Components Amphenol offers a wide array of passive optical devices that include optical splitters, passive non-intrusive monitoring devices, WDM, CWDM, and DWDM devices. Custom package allow for flexible mounting in panels, demarcation boxes, or distribution hubs. C/D WDM modules are designed to maximize the utilization of the fiber assets. Monitoring devices gives a non-intrusive window into traffic coming in to the cell site and out to the backhaul network. Monitoring ensures early problem detection and compliance to backhaul SLA s. Indoor Cable Assemblies Amphenol is a premier manufacturer of Multimode and Singlemode cable assemblies in the telecommunications industry, meeting or exceeding industry lead times and requirements for optical transmission loss, reflectance, visual end face specifications, and geometry. Amphenol offers standard patch cords in a variety of configurations and connector types. All cable standards standard including OM3, OM4, SMF-28e and bend reduced fiber types are available. Amphenol Fiber Optic Products
Outdoor DAS Indoor DAS Venues Monitoring Campus C/D WDM Typical Outdoor Distributed Antenna System Application Typical Cell Site Monitoring Application (at Base Station or MSC) Creative Solutions for the Mobile Evolution
Contact us at: 2100 Western Court Suite 300 Lisle, IL 60532 USA Toll Free: (800) 944-6446 Tel: (630) 960-1010 Info@amphenol-fiberoptics.com Fax: (630) 810-5640 sales@amphenol-fiberoptics.com 2012 Amphenol Corp. All rights reserved www.amphenol-fiberoptics.com