Schlage Sense App Instructions Contents How to pair the lock with an Apple device... 2 How to Retrieve Your Activity History for your Schlage Sense Locks... 4 How to Add Access Codes to Your Schlage Sense Locks... 5 How to Remove Access Codes from Your Schlage Sense Locks... 6 How to Schedule Access Codes on Your Schlage Sense Locks... 7 How to add additional user to HomeKit... 8
How to pair the lock with an Apple device Download Schlage Sense app from the App Store Turn on Bluetooth from Settings or Swipe Up menu Open the Sense app > Tap on Add New Lock > Enter a Home Name when prompted and tap Continue Select SENSE under Available Locks. If it is the correct lock then it will beep and flash. Tap Continue Enter the Accessory Code (XXX-XX-XXX) manually or use the device camera to capture the code Give the lock a Siri Nickname, choose a 4 to 8 digit access code (this will be the default length) and assign a username for the access code
How to Retrieve Your Activity History for your Schlage Sense Locks https://youtu.be/dhqqup_a9ow Install the Schlage Sense lock by following the directions in the Installation Video Go to the home screen on your device Locate and tap on the Schlage Sense App icon You should see the last activity populate at the bottom of the Sense App home page (i.e. locked by mobile device 4 mins ago.) Tap on the last activity The last 100 events that have occurred on the lock will be displayed Tap DONE in the upper left-hand corner to return to the Sense App home page or tap CLEAR to remove all activity history for the selected lock
How to Add Access Codes to Your Schlage Sense Locks https://youtu.be/ruqgmvmeb3c An access code is the code you will manually enter on the keypad to gain entry Install the Schlage Sense lock by following the directions in the Installation Video Go to the home screen on your device Locate and tap on the Schlage Sense App icon Tap on the people Icon in the bottom right-hand corner of the screen on the Sense App home page Tap the plus (+) icon in the upper right-hand corner of the Access Codes page Enter in a name for the access code you would like to add (i.e. Walter s code) Enter in the 4-8 digit access code you would like to use All access codes must be the same length for the selected lock Tap Save in the upper right-hand corner of the screen to save your new code You can send the new code via text messaging or email or select Don t send code If you have another code you want to set up repeat the same process from the Access Codes page For all day access tap DONE in the upper left-hand corner.
How to Remove Access Codes from Your Schlage Sense Locks https://youtu.be/ruqgmvmeb3c Go to your home screen on your device Locate and tap on the Schlage Sense App icon Tap on the people Icon in the bottom right-hand corner of the screen on the Sense App home page Tap on the name of the code you want to remove Tap on Disable to restrict access or tap on Delete User to completely remove Tap the back arrow (<) to return to the Access Codes page Tap DONE when you have finished removing access codes
How to Schedule Access Codes on Your Schlage Sense Locks ACCESS SCHEDULES allow you to determine when certain access codes work Go to your home screen on your device Locate and tap on the Schlage Sense App icon Tap on the people Icon in the bottom right-hand corner of the screen on the Sense App home page If you want to select a specific time frame to allow a code access tap the name of the access code you want to schedule Tap schedule 1 Select a Start time (i.e. 12:00 PM) Select an End Time (i.e. 2:00PM ) Highlight the days you would like to schedule access for Tap the back arrow (<) at the upper left-hand corner of the screen when you are done setting up Schedule 1 Repeat these steps for a second schedule if needed Tap the back arrow (<) in the upper left-hand corner of the screen to save your new code When you have completed entering the codes you want to program tap DONE in the upper lefthand corner of the Access Codes page
How to add additional user to HomeKit https://youtu.be/fftnyidjxwy On device that app has already been paired with lock go to settings on device First verify icloud settings : Tap icloud Verify icloud drive is on and Keychain is on Tap the back arrow at the top left corner Select Home Kit Select Home Tap Invite People Enter user s email that they use to sign into their icloud account with Tap return Tap add Exit Homekit On the 2nd user s device you will need to accept the invitation before they will have access to the lock through the Sense App.