Consistent approach Exclusively for Stockholders Premier collection service Comprehensive stock availability Stainless Steel, Aluminium, Copper and Brass Stockholder Sales tel: + (0) 2 2 200 fax: + (0) 2 2 0 e-mail sales@themetalcentre.com web www.themetalcentre.com standard stock range
welcome The Metal Centre is situated over two sites providing a,000 sq ft stockholding facility. Exclusively for Stockholders The Metal Centre is a truly independent source, committed to servicing the requirements of metal stockholders only. Comprehensive stock availability We continually evaluate our stock levels to ensure maximum stock availability of our comprehensive range. Consistent Approach We offer a consistent service, quality and price in line with market developments to develop long term customer relationships. Premier collection service Our dedicated collections service enables rapid turnaround times to meet the needs of today s stockholding industry. Stainless Steel, Aluminium, Copper and Brass We continually evaluate our stock range of sheet, rounds, tubular, solids, flats, hollows and fittings to add new products which meet your stockholding needs. Please call us on 02 2 200 for current price and availability.
s All weights shown in this publication are for guidance only. They are calculated using nominal dimensions and are scientifically recognised densities. Please note that in practice, the actual weight can vary significantly from the theoretical weight due to variations in manufacturing tolerances and compositions. The information contained herein is based on our present knowledge and experience and is given in good faith. However, no liability will be accepted by the Company in respect of any action taken by any third party in reliance thereon. As the products detailed herein may be used for a wide variety of purposes and as the Company has no control over their use, the Company specifically excludes all conditions and warranties expressed or implied by statute or otherwise as to dimensions, properties and/or their fitness for any particular purpose. Any advise given by the Company to any third party is given for that party s assistance only and without any liability on the part of the Company. Any contract between the Company and the customer will be subject to the Company s Conditions of Sale. The extent of the Company s liabilities to any customer is clearly set out in those Conditions; a copy of which is available on request.
contents 2-8 9-2 - 8-2 22-29 0 - - 8 9-2 - 6 8 9 0-6 aluminium extrusions aluminium rolled products brass copper stainless steel bar and sections stainless steel rolled products stainless steel seamless pipe stainless steel seamless butt weld fittings stainless steel welded pipe stainless steel welded butt weld fittings stainless steel flanges stainless steel bsp fittings stainless steel seamless tube stainless steel handrail tube stainless steel hygenic tube stainless steel hygenic fittings stainless steel structural & decorative tube stainless steel 000lb fittings stainless steel metric tube & fittings
aluminium extrusions Dia Dia ROUND BAR MACHINING 0.09 6 0. 8 0.9 6 0.26 2 0. 9 6 0. 8 0. 6mm 0. 6 0.6 0. 20mm 0.8 6 0.9 8.0. 8. 2. 6 2.8 8 2.60 mm 2.6 2.09 0mm.2 8.6.2 8.8 2.9 2 8 6.20 2 6.9 2 8. 2 2 8.8 2 8 9.6 2 0.0 2.0.0 2 6.80 9.0 22.00 2.80 2 2.80.00.0.80 2.0.0 6 9.0 6 2 8.00 6.0 2.20 2.20 8 8.90 8 2 99.20 9.00 9 2 2.00 0.00 66.00 2 98.00 22.00 269.00 09.00 6 2.00 We stock aluminium round bar in three machining alloys: Alloy 6082 T6 Machines well and, with chip breakers, produces swarf in short tight coils. Alloy 20 T/T6 Often referred to as FMA (Free Machining Alloy), this is produced especially for use on automatic lathes. It offers exceptional machinability at high speeds and forms fine chips which are easily removed. It is particularly suitable for components with complex, detailed or extensive machining and can often replace free machining brass without tool changes. Alloy 6026 T6/T9 This may be used in place of Alloy 20 in applications requiring higher corrosion resistance and better anodising response. It has excellent machinability and surface finishing characteristics.
aluminium extrusions 8 x 0.6 2 x 8 0. 2 x 6 0.6 2 x 0.22 2 x 8 0. 8 x 8 0. 8 x 6 0.20 8 x 0.2 8 x 8 0. 8 x 2 0. x 8 0.6 x 6 0.2 x 0. x 8 0.9 x 2 0.66 x 8 0.82 8 x 8 0.9 x 6 0. x 8 0.22 x 6 0. x 0. x 6 0. x 8 0.66 x 2 0.8 x 8.09 x. x 8 0.2 x 6 0. x 0. x 8 0.82 x 2.09 x 8. x.6 x 2.9 2 x 8 0. 2 x 6 0.9 2 x 0.66 2 x 8 0.98 2 x 2. 2 x 8.6 2 x.9 2 x 2.62 2 x.28 x 0.6 x 8. x 2. x 2.29 x.06 x.82 2 x 8 0. 2 x 6 0.66 2 x 0.8 2 x 8. 2 x 2. 2 x 8 2.9 2 x 2.62 2 x.0 2 x. 2 x 2.2 2 2 x 6 0.82 2 2 x.09 2 2 x 8.6 2 2 x 2 2.9 2 2 x.28 2 2 x. 2 2 x 2 6.6 2 2 x 2 8. x 8 0.66 x 6 0.98 x. x 8.9 x 2 2.62 x 8.28 x.9 x.2 x 2 0.0 2 x.2 2 x 2.0 x 8 0.8 x 6.0 x. x 8 2.62 x 2.0 x 8. x.2 x 6.99 x 8. x 2.00 x 2.9 x 2. 6 x 2.62 6 x 8.9 6 x 2.2 6 x 0.0 FLAT BAR Alloy 6082-T6 or 606-T6/606A-T6
aluminium extrusions SQUARE BAR Alloy 6082-T6 0. 6 0. 8 0.2 2 0. 8 0.68 0.98 8.. 2. 2.9. 2 6.99 2 2 0.90.0 2 2.0 28.00 BOX SECTION SQUARE Alloy 606-T6 or 6082-T6 2 x 2 x 6 swg 0.20 x x 6 swg 0. x x 6 swg 0.2 x x 0 swg 0.8 x x 6 swg 0. x x 0 swg.00 2 x 2 x 6 swg 0.6 2 x 2 x 0 swg.2 x x 0 swg. 0 x 0 x.0mm.2 2 x 2 x 6 swg 0.8 2 x 2 x 0 swg.68 2 x 2 x.06 2 2 x 2 2 x 0 swg 2.2 x x 0 swg 2. x x 0 swg. x x 6.6 BOX SECTION RECTANGULAR Available in one or more of the following Alloys 6082-T6 606-T6 606A-T6 2 x x /6 0.8 2 x x 6 swg 0. 0 x 2 x.0mm.2 2 x x 0 swg.00 2 x x 0 swg.22 2 x 2 x 0 swg. x x 0 swg.6 x 2 x 0 swg.90 x 2 x 0 swg 2. x x 0 swg 2.2 x x 0 swg 2. x 2 x 0 swg 2.6 6 x 2 x 0 swg.0 6 x x 8 0.80
aluminium extrusions 8 o/d x 6 swg 0. 2 o/d x 8 swg 0.2 2 o/d x 6 swg 0. 2 o/d x 0 swg 0.26 8 o/d x 8 swg 0. 8 o/d x 6 swg 0.20 8 o/d x 0 swg 0. o/d x 8 swg 0.9 o/d x 6 swg 0.2 o/d x 0 swg 0. 8 o/d x 8 swg 0.22 8 o/d x 6 swg 0.29 8 o/d x 0 swg 0. o/d x 8 swg 0.2 o/d x 6 swg 0. o/d x 0 swg 0.6 o/d x 6 0.8 o/d x.0 8 o/d x 6 swg 0. 8 o/d x 0 swg 0.0 o/d x 8 swg 0.2 o/d x 6 swg 0.2 o/d x 0 swg 0.9 o/d x 6.08 8 o/d x 6 swg 0.6 8 o/d x 0 swg 0.88 2 o/d x 8 swg 0.8 2 o/d x 6 swg 0.0 2 o/d x 0 swg 0.96 2 o/d x 6. 2 o/d x. 8 o/d x 6 swg 0. 8 o/d x 0 swg.0 8 o/d x 6.8 o/d x 6 swg 0.9 o/d x 0 swg. 8 o/d x 0 swg.2 2 o/d x 6 swg 0.68 2 o/d x 0 swg.2 2 o/d x 6.86 2 o/d x 2.9 2 o/d x 6 swg 0. 2 o/d x 0 swg.9 2 2 o/d x 6 swg 0.86 2 2 o/d x 0 swg.6 2 2 o/d x 6 2.8 2 2 o/d x.08 2 2 o/d x 8.6 2 o/d x 0 swg.8 o/d x 6 swg.0 o/d x 0 swg 2.02 o/d x 6 2.90 o/d x.6 2 o/d x 6 swg.2 2 o/d x 0 swg 2. 2 o/d x.6 o/d x 6 swg.8 o/d x 0 swg 2.2 o/d x. 2 o/d x 0 swg.0 2 o/d x.8 o/d x 0 swg. o/d x 6.2 6 o/d x 0 swg*. 6 o/d x.90 6 2 o/d x 8.8 TUBE Available in one or more of the following alloys 6082-T6 606-T6 606A-T6 Scaffold TUBE 29 2 o/d x swg. Scaffold Tube is drift tested to BS 9
aluminium extrusions CHANNEL Available in one or more of the following alloys 6082-T6 606-T6 606A-T6 8 x 8 x 6 0. 2 x 2 x 6 0. 2 x 2 x 8 0.2 8 x 8 x 6 0.9 8 x 8 x 8 0.6 x x 6 0.2 x x 8 0.9 8 x 8 x 8 0.2 x 2 x 8 0.8 x x 8 0.9 x x 6 0. x x 8 0.60 x x 8 0. x x 8 0.66 x x 8 0.6 2 x x 8 0.60 2 x x 8 0. 2 x 2 x 8 0.9 2 x 2 x. 2 x / 2 x 6 x /6. x x 8 0.6 2 x 2 x 8 0.60 2 x x 8 0.82 2 x x 6.22 2 x x.2 2 x 2 x 8.0 2 x 2 x.9 2 x 2 x 8.26 2 x 2 x 6.8 2 x 2 x 2.0 2 x x 6. 2 2 x x 8 0.9 2 2 x x 6.2 x x 8.0 x 2 x 8.26 x 2 x 6.8 x 2 x x 6 2.66 x 2 x 8.8 x 2 x 6 2. x 2 x 2.8 2 x 2 x x 6 2.90 x 2 x 8.69 x 2 x x 6.66 x 2 x x 6.08 6 x 2 x x 6. 6 x x x 8 6.2 6 x x 8 x 2 8.9 8 x x 8 x 2 9.80 Dimensions are in the order: base x leg x base thickness x leg thickness 6
aluminium extrusions x x 8 0.0 x x 8 0. x x 8 0.2 2 x 2 x 8 0.6 2 x 2 x 6 0.92 2 x 2 x.20 2 x x 8 0.8 2 x 2 x 6.2 2 x 2 x 8 0.8 2 x 2 x.6 x x 2. Dimensions are in the order: cross x upright x thickness TEE SECTION Alloy 6082-T6 or 606A-T6 2 x 2 x 6 0.0 2 x 2 x 8 0.9 8 x 8 x 6 0. 8 x 8 x 8 0.2 x x 6 0.6 x x 8 0.0 8 x 8 x 8 0.6 2 x 2 x.0 0.8 x x 6 0.2 x x 8 0. x x 6 0.9 x x 0.6 x x 6 0.2 x x 8 0.2 x x 6 0.6 x x 0.98 2 x 2 x 6 0.2 2 x 2 x 8 0.6 2 x 2 x 6 0.92 2 x 2 x.20 x x 8 0. x x 6.09 x x.2 0 x 0 x.0 0.9 2 x 2 x 6 0. 2 x 2 x 8 0.8 2 x 2 x 6.2 2 x 2 x.6 2 x 2 x 8 2.8 2 2 x 2 2 x 8.06 2 2 x 2 2 x 6.8 2 2 x 2 2 x 2.08 x x 8.28 x x 6.9 x x 2. x x 8.69 x x.9 x x 8.00 6 x 6 x 2 0.00 EQUAL ANGLE Available in one or more of the following alloys 6082-T6 606-T6 606A-T6
aluminium extrusions UNEQUAL ANGLE Available in one or more of the following alloys 6082-T6 606-T6 606A-T6 x 2 x 6 0. x 2 x 8 0.2 x 2 x 6 0. x 2 x 8 0.0 x 8 x 8 0. x x 6 0.8 x x 8 0.6 x 2 x 8 0.6 x x 8 0. x x 8 0. 2 x 2 x 8 0. 2 x x 8 0.6 2 x x 8 0.2 x x 8 0. 0 x 2 x.0 0.9 2 x 2 x 8 0.2 2 x x 8 0. 2 x x 8 0.6 2 x x 6 0.92 2 x x.20 2 x 2 x 8 0. 2 x 2 x 6.09 2 x 2 x.2 2 2 x x 8 0. 2 2 x 2 x 8 0.8 2 2 x 2 x 6.2 2 2 x 2 x.6 x x 8 0.8 x x.6 x 2 x 8 0.96 x 2 x 6.0 x 2 x.86 x 2 x 8.0 x 2 x 6.8 x 2 x 2.08 x x 8.06 x 2 x 8.28 x 2 x 2. x x 2.9 6 x x 8.6 8
aluminium rolled products 2000 x 000 x 0. 2. 200 x 20 x 0..2 2000 x 000 x 0.6.2 200 x 20 x 0.6.08 2000 x 000 x 0..8 200 x 20 x 0..99 2000 x 000 x 0.8. 200 x 20 x 0.8 6.8 2000 x 000 x.0.2 200 x 20 x.0 8. 000 x 20 x.0 0.20 2000 x 000 x.2 6.0 200 x 20 x.2 0.20 000 x 20 x.2 2.20 000 x 00 x.2.60 2000 x 000 x.* 8. 200 x 000 x. 0.6 200 x 20 x.* 2.0 200 x 00 x..2 000 x 000 x. 2.20 000 x 20 x.*.20 000 x 00 x.* 8.0 00 x 000 x. 2.60 20 x 20 x. 6. 00 x 20 x..8 000 x 20 x. 20. 0 x 20 x. 9.0 000 x 00 x. 2.9 2000 x 000 x 2.0* 0.80 200 x 000 x 2.0. 200 x 20 x 2.0* 6.90 200 x 00 x 2.0 20. 200 x 600 x 2.0* 2.68 200 x 0 x 2.0* 2. 000 x 000 x 2.0 6.0 000 x 20 x 2.0* 20.0 000 x 00 x 2.0 22.6 000 x 00 x 2.0* 2.0 000 x 600 x 2.0* 26.02 000 x 0 x 2.0* 28.6 000 x 2000 x 2.0* 2.2 00 x 20 x 2.0 2.00 00 x 00 x 2.0 2.20 20 x 20 x 2.0 22.02 20 x 00 x 2.0 26.2 00 x 20 x 2.0 2. 00 x 00 x 2.0 28.6 0 x 20 x 2.0 2. 0 x 00 x 2.0 0.9 000 x 000 x 2.0* 2. 000 x 20 x 2.0* 2. 000 x 00 x 2.0 0.66 000 x 00 x 2.0* 2.60 000 x 600 x 2.0*.69 000 x 0 x 2.0*.9 000 x 2000 x 2.0*.9 2000 x 000 x 2.*.60 200 x 20 x 2.* 2.20 000 x 00 x 2.* 0.0 2000 x 000 x.0* 6.0 200 x 000 x.0 20. 200 x 20 x.0* 2.0 200 x 00 x.0 0.9 200 x 600 x.0* 2.2 200 x 0 x.0*. 000 x 000 x.0 2.0 000 x 20 x.0* 0.0 000 x 00 x.0. 000 x 00 x.0* 6.60 000 x 600 x.0* 9.02 000 x 0 x.0* 2.68 000 x 2000 x.0* 8.8 00 x 20 x.0.0 00 x 00 x.0.80 20 x 20 x.0.0 20 x 00 x.0 9.6 00 x 20 x.0. 00 x 00 x.0 2.68 0 x 20 x.0 8.0 0 x 00 x.0. 000 x 20 x. 20. 000 x 20 x.0* 0.66 000 x 00 x.0* 8.80 000 x 600 x.0* 2.0 000 x 0 x.0* 6.9 000 x 2000 x.0* 6.00 *Also stock coated one side. SHEET Alloy 00-H We have in-house facilities for Plastic Coating to suit your requirements 9
aluminium rolled products Alloys 2-H22 0-H 6082-T6 08-H SHEET Other alloys 2000 x 000 x.0 200 x 20 x.0 2000 x 000 x.2 200 x 20 x.2 2000 x 000 x. * 200 x 20 x. * 000 x 00 x. 2000 x 000 x 2.0 * 200 x 20 x 2.0 * 000 x 00 x 2.0 2000 x 000 x 2. 200 x 20 x 2. 2000 x 000 x.0 * 200 x 20 x.0 * 000 x 20 x.0 000 x 00 x.0 STUCCO SHEET Alloy 00-H BAR TREADPLATE Alloy -H 0 *Also stock coated one side 2000 x 000 x 0. 2. 200 x 20 x 0..2 2000 x 000 x 0.6.2 200 x 20 x 0.6.08 2000 x 000 x 0..9 200 x 20 x.. 28 x 29 x 2.0. 200 x 20 x 2.0 8.6 000 x 00 x 2.0 26.80 2000 x 000 x.0.0 28 x 29 x.0 2.0 200 x 20 x.0 2.00 200 x 20 x 0..99 2000 x 000 x 0.8. 200 x 20 x 0.8 6.8 200 x 20 x.0 8. 200 x 20 x.2 0.20 000 x 20 x 0.9 9.2 000 x 00 x 0.9.09 000 x 20 x.2 2.2 000 x 00 x.2.8 000 x 00 x.0 8.8 2000 x 000 x. 2.02 200 x 20 x. 9. 000 x 00 x. 6.29 28 x 29 x 6.0 9. 200 x 20 x 6.0.6 000 x 00 x 6.0.0
aluminium rolled products Product Approximate weight Code per plate (Kg) ATG 200 x 20 x..88 ATG20 200 x 20 x 2.0 8. ATG0 200 x 20 x.0 26.0 We can split packs of SHATE & PLATE in grades 08-0 & 6082-T6 White Painted (Kg) 200 x 20 x.0.90 200 x 20 x.0 2.0 200 x 20 x 6.0 0.80 (kg) per sheet 200 x 20 x 0.9.62 200 x 20 x.2 0.20 200 x 20 x. 2.8 200 x 20 x 2.0.0 Type 6082 08-0/H per plate 200 x 20 x.0.90 200 x 20 x.0 2. 200 x 20 x 6.0 0.8 Type 00 200 x 20 x.0.90 000 x 00 x.0 9.28 200 x 20 x.0 2.0 000 x 00 x.0 6.8 2000 x 000 x 6.0 2.80 200 x 20 x 6.0 0.80 000 x 00 x 6.0.92 Grade 2 2000 x 000 x.0 2.60 200 x 20 x.0.0 000 x 00 x.0 8.60 2000 x 000 x.0 2.00 200 x 20 x.0 2.0 000 x 00 x.0 60.0 2000 x 000 x 6.0 2.0 200 x 20 x 6.0 0.60 000 x 00 x 6.0 2.90 TRIPLEGRIP (ATG) Aluminium Treadplate Alloy 02H2 SHEET White Painted 0/00-H6(H) SHATE 08-0 6082-T6 per plate (kg) 200 x 20 x 8.0 6.8 200 x 20 x 0.0 8.68 200 x 20 x 2.0 0.6 200 x 20 x.0 2.8 200 x 20 x 20.0 69. 200 x 20 x 2.0 2. PLATE Alloys 6082-T6 08-0 6082-T6
brass Dia Dia ROD CW6N/ CZ2M Free Machining Brass metre lengths* BSEN 26 8 0.0 2 0.0 mm 0. 6 0. mm 0. 2 0.2 6mm 0.2 0.2 mm 0. 9 2 0. 6 0.2 8mm 0. 2 0. 9mm 0. 8 0.6 0mm 0.6 6 0.82 2mm 0.96 2.08 mm. 2.22 mm. 9 6.6 mm.0 8.6 6mm. mm.92 6 2.0 8mm 2.6 2.2 20mm 2.6 6 2.8 22mm.2 8.0 6.9 2mm.8 2mm.. 6.86 26mm. 28mm.2 8. 0mm 6.0 6 6.0 6. 6.2 8 8. mm 8.8 2 9.69 0mm 0.0 8.0.20 8.0 0mm 6.0 2.20 2 8 9.0 2 2.80 60mm 2.00 2 8 2.0 2 2 26.90 6mm 28.2 2 8 29.0 2 2.60 8.80.0 2 2.80 60. 68.90.80 2 8.20 0mm 2.82 mm 60.9 80mm 20.00 20mm 28.00 2 *Bars over inches in diameter may vary in length.
brass Dia Dia 0.2 6 0.2 8 0.6 6 0.82 2.08 8.68 2.2 ROD CW606N/CZ Riveting Quality Brass metre lengths BSEN 26 Dia Dia 8 0.9 2.0 8.6 2. 6 2. 8.9.6 6.20 8.6 2 9.2 2.9 2 6. 2 20.9 2 2 2.6 2 0..28 66.62 ROD CW2R CZM High Tensile Brass/ Manganese Bronze metre lengths* BSEN 26 Dia Dia 2.2. 6. 2 9.69. 2.20 2 2 26.90 8.80 ROD CW2R/CZ2 Naval Brass metre lengths BSEN 26 *Bars over inches in diameter may vary in length.
brass AF AF HEXAGON CW6N/ CZ2M Free Machining Brass metre lengths BSEN 26 mm 0.8 6mm 0.2 0.28 0.29 0.0 6 0.6 8mm 0. 0.2 0.0 8 0.6 0mm 0. mm 0.89 0. 0.9 6 0.9 2mm.06 2.9 mm.2 0.2. mm. 9 6.0 mm.6 0.600. 8. 6mm.88 mm 2. 6 2.2 8mm 2. 0.0 2.9 9mm 2.66 2.6 20mm 2.9 6. 0.820.9 22mm.6 8.69 0.920.02 6. 2mm.2..00.8 6.6.00.6 8 6.0 0mm 6.6.200 6.8.2 2mm..00 8.0 6 8.29 8 8.98 6mm 9..80 0.0 2 0.0.62 2. mm 2.0.60.20.0 6mm.60 0mm 8.0.860 6.0 2.00 9.90 2.200 2.00 2 2 29.0 60mm 26.0 6mm.0 2.90 2.0 ANGLE CW62N/CZ0 2 foot lengths BSEN 26 2 x 2 x 8 0.62 x x 8 0.9 x x 8.29 x x 8.6 2 x 2 x 8.9 2 x 2 x 6 2.89 2 x 2 x 8 2.66 2 x 2 x.0 x x 8.2
brass AF AF 0. 6 0. 8 0. 6.0 2. 8 2..08 8.20.8 8. 2 2.0 6.80 2 2.90 2 2.80 2 2.2 9.0 SQUARE CW6N/ CZ2M Free Machining Brass metre lengths BSEN 26
brass FLAT BAR CW6N/CZ2 Free Machining Brass 2 foot lengths BSEN 26 8 x 8 0.26 8 x 0.2 2 x 8 0. 2 x 0.69 8 x 8 0. 8 x 0.86 8 x 8.29 x 8 0. x 6 0. x.0 x 8. x 2 2.06 x 8 0.69 x 6.0 x. x 6.2 x 8 2.06 x 2 2. x 8. x. x 8 0.8 x. x 8 2. x 2. x. x 6.8 2 x 8.0 2 x 6. 2 x 2.06 2 x 8.08 2 x 2. 2 x 8. 2 x 6. 2 x 8.2 x 2. 2 x 8. 2 x 6 2.06 2 x 2. 2 x 8. 2 x 2.8 2 x 8 6.9 2 x 8. 2 x.00 2 x. 2 x 2 6.0 2 2 x. 2 2 x 8.08 2 2 x 2 6.86 2 2 x 0.02 2 2 x.60 2 2 x.0 2 2 x 2 20.0 x 8 2.06 x. x 8 6. x 2 8.2 x 6.0 x 2 2.0 x 2 2.90 x 8 2. x.8 x 2.00 x 6.0 x 2 2.0 6
brass 2m x m x 0.mm.6 2m x m x 0.mm* 9.0 x 2 x 0.mm. 2m x m x 0.0mm*.80 8 x m x 0.90mm 9.00 2m x m x 0.90mm*.20 x 2 x 0.90mm.6 8 x x 8 swg 0.6 8 x m x.2mm* 2.00 2m x m x.2mm* 20.0 x 2 x 8 swg. x 2 x 6 swg 0.00 8 x x.6mm 0.9 8 x m x.mm*.00 2m x m x.mm* 2.0 2m x m x 2.0mm*.80 x 2 x 2.0mm 2.60 8 x x swg.00 2m x m x 2.mm* 2.2 2m x m x.0mm* 0.0 x 2 x 0 swg 20.0 8 x x 0 swg 8.6 2m x m x mm 6.60 2m x m x mm 86.00 2m x m x / 6 80.00 2m x m x / 0.00 SHEET CW08L-H09/ CZ08-H/H BSEN 62 * These sizes are also stocked bright polished and plastic coated one side. 8' x ' is Commercial quality only. 2m x m x 0.mm 9.0 ft x 2ft x 2 swg. 2m x m x 0.mm.80 2m x m x 0.9mm.20 ft x 2ft x 20 swg.6 2m x m x.2mm 20.0 ft x 2ft x 8 swg. 2m x m x.6mm 2.00 2m x m x 2mm.8 SHEET CW0L-HO CZ06 BSEN 62
copper SHEET CW02A-H00/ C06 Soft BSEN 62 2m x m x 0.mm 9.9 ft x 2ft x 2 swg.6 2m x m x 0.mm 2.0 2m x m x 0.9mm 6.00 8' x ' is Commercial quality only. ft x 2ft x 20 swg.9 2m x m x.2mm 2.0 ft x 2ft x 8 swg.9 2m x m x.mm 26.0 SHEET CW02A-H06/ C06 Half Hard BSEN 62 2m x m x 0.mm 9.9 ft x 2ft x 2 swg.6 2m x m x 0.mm 2.0 ft x 2ft x 22 swg.6 2m x m x 0.9mm 6.00 ft x 2ft x 20 swg.9 2m x m x.2mm 2.6 ft x 2ft x 8 swg.9 8ft x ft x 8 swg 2.28 2m x m x.mm 26.2 8ft x ft x.6mm 2. ft x 2ft x 6 swg 0.60 8ft x ft x 2.0mm 2.9 2m x m x 2mm.60 ft x 2ft x swg.20 2m x m x 2.mm.0 8ft x ft x.0mm 9.8 2m x m x mm.0 ft x 2ft x 0 swg 2.0 2m x m x mm.00 8ft x ft x.0mm 0.8 2m x m x mm 92.6 2m x m x 6mm.0 8
copper 2m x m x 0.9mm 6.00 ft x 2ft x 20 swg.9 2m x m x.2mm 2.0 200 x 600 x.6mm 0.2 2m x m x.mm 26.0 2m x m x 2mm.60 200 x 600 x 2mm 2.80 2m x m x mm.0 ft x 2ft x 0 swg 2.0 2m x m x mm.00 2m x m x mm 92.6 2m x m x 6mm.0 SHEET CW00A-H06/ C0 Half Hard BSEN 62 9
copper FLAT BAR CW00A-H00/ C0 Hard Drawn High Conductivity Radius edge -.2 metre lengths BSEN 60 2 x 8 0.6 2 x 6 0. 2 x 0.2 8 x 8 0. x 8 0. x 6 0.8 x.08 20mm x mm 0.89 20mm x 6mm.0 20mm x 0mm.8 2mm x mm 0.6 2mm x mm. 2mm x 6mm. 2mm x 0mm 2.22 x 8 0.2 x 6.08 x. x 2 2.8 0mm x mm 0.80 0mm x mm. 0mm x 6mm.6 0mm x 0mm 2.6 x 8 0.90 x.9 2 x 8.08 2 x 2. 2 x 8.2 2 x 6.6 0mm x mm.0 0mm x mm.8 0mm x 6mm 2. 0mm x 8mm 2.8 0mm x 0mm.6 0mm x mm 2.2 0mm x 6mm 2.6 0mm x 8mm. 0mm x 0mm. 0mm x 2mm. 2 x 8. 2 x 6 2. 2 x 2.8 2 x 8. 2 x 2. 2 x 8.6 60mm x 6mm.20 60mm x 0mm. 2 2 x.9 2 2 x 8.8 2 2 x 2.8 x. x 8 6.6 x 2 8.6 6mm x 6mm.06 80mm x 0mm.2 80mm x 2mm 8. 00mm x 6mm. 00mm x 0mm 8.90 00mm x 2mm 0.68 x. x 8 8.6 x 2.0 20mm x 0mm 0.0 x.8 x 2.0 0mm x 6mm 8.02 0mm x 0mm.0 6 x 8.6 200mm x 0mm.80 20
copper Dia Dia 0.28 6 0. 8 0.6 0mm 0.0 2mm.0 2. 8.6 6mm.9 20mm 2.80 2. 8. 2mm.9. 8. 0mm 6.2.0 8 8. 2 0.00 0mm.20 8.90 2 8.00 2 22.80 2 2 28.20 2.20 ROUND BAR CW00A/C0 Hard Drawn High Conductivity -.2 metre lengths BSEN 60 2
stainless steel bar and sections Dia Dia ROUND.0 (0) Bright Drawn mm 0.06 8 0.06 mm 0.0 6 0. mm 0.6 6mm 0.22 0.2 mm 0.0 6 0.9 8mm 0.0 8 0.6 0mm 0.62 6 0. 2mm 0.89 2.00 9 6.22 mm.22 mm.0 8.6 6mm.9 6.89 8mm 2.0 2.2 20mm 2.8 22mm.00 8.0 2mm. 2mm.88.0 Dia Dia ROUND.0 (0) Smooth Turned/ *Bright Ground 2mm*.88.0 8.0 0mm*.8 6.2 8. mm.60 2 9.0 0mm* 9.9 8 0.60 2.20 mm 2.6 8.0 0mm*.0 2 6.00 2 8 8.0 2 20.0 60mm 22.0 2 8 22.60 2 2 2.00 2 8 2.60 2 0.0 " 6.00 22
stainless steel bar and sections Dia Dia 2.90 2 9.80.0 6.00.0 2 82.0 02.00. 6 6.2 99.00 ROUND.0 (0) Rough Turned Dia Dia mm 0.06 8 0.06 mm 0.0 6 0. mm 0.6 6mm 0.22 0.2 6 0.9 8mm 0.0 8 0.6 0mm 0.62 6 0. 2mm 0.89 2.00 9 6.2 mm.0 8.6 6mm.9 2.2 20mm 2.8 8.0 2mm.88.0 ROUND.0 (0L) Bright Drawn 2
stainless steel bar and sections Dia Dia ROUND.0 (0L) Smooth Turned 2mm.88.0 8.0 0mm.8 6.2 mm.60 8. 2 9.0 0mm 9.9 8 0.60 2.20 0 mm.0 2 6.00 2 20.0 60 mm 22.0 2 2 2.00 2 0.0 6.00 Dia Dia ROUND.0 (0L) Rough Turned 2.90 2 9.80.0 6.00.0 2 82.0 02.00.98 2 2.00.00 6 6.2 6 8.0 6 2 2.00 99.00 2 229.00 8 260.00 8 2 29.00 9 29.00 0 06.00 92.00 2 8.00 0mm 28.00 6 00.00 2
stainless steel bar and sections Dia Dia mm 0.06 8 0.06 mm 0.0 6 0. mm 0.6 6mm 0.2 0.2 6 0.9 8mm 0.0 8 0. 0mm 0.6 6 0. 2mm 0.90 2.0 mm.2 9 6.28 mm. 8.8 6mm.60 6.9 8mm 2.0 2.2 20mm 2.0 8.09 2mm.60 2mm.9.0 ROUND.0 (6L) Bright Drawn Dia Dia 2mm*.9 *.0 8 *. 0mm*.6 * 6.0 2mm 6.0 8 *.6 mm*.66 2 * 9.08 0mm* 0.00 8 * 0.0 * 2.0 mm 2.0 8.20 0mm.60 2 * 6.0 2 8 * 8.20 2 * 20.0 2 8 * 22.80 60mm* 22.0 2 2 * 2.20 2 8 2.80 2 * 0.0 * 6.0 ROUND.0 (6L) Smooth Turned *Bright Ground 2
stainless steel bar and sections Dia Dia ROUND.0 (6L) Rough Turned.20 2 0.20.60 6.0.90 2 82.90 92.0 02.00.00 2 2.00.00 6.00 6 60.00 6 2.00 20.00 8mm 2.00 2 20.00 8 262.00 8 2 296.00 220mm 2.00 9 2.00 9 2 0.00 0 09.00 0 2.00 9.00 2 90.00 20mm 60.00 0mm.00 802.00 6 09.00 HEXAGON.0 (0) HEXAGON.0 (6L) 26.2 0.. 0.8.00.0.62.9.62..0 2.8.820 2.9.8.8.9".88 0.00. 0.62.0 0.62". mm.99 0.0" 2.0 0.820" 2.99 0.8". 0.920".6.00.0.2".9.20" 6.90.00..0.9.2".6.200" 6.0.20" 6.9.00".2." 8..80" 9..00" 0.0.60" 2.0.860".8 2.00" 2.80
stainless steel bar and sections 20 x 0.8 2 x 0.98 20 x 2.92 2 x 2 2. 0 x 2 2.8 2 x 2.96 0 x.6 0 x. 0 x.9 60 x. x 8.88 00 x.90 2 x 20.9 0 x 20 6.2 0 x 20.90 60 x 20 9.8 x 20.90 00 x 20.80 0 x 2.9 0 x 2.90 0 x 2 9.88 60 x 2.90 x 2.80 00 x 2 9.80 Flat.0 (0L) Hot Rolled 20 x 0.9 2 x 0.99 20 x 2.9 2 x 2 2.9 0 x 2 2.8 2 x 2.99 0 x.8 0 x.9 60 x.6 00 x.9 0 x 20.8 0 x 20 6. 0 x 20.96 60 x 20 9. x 20.9 0 x 2.9 0 x 2.96 0 x 2 9.9 Flat.0 (6L) Hot Rolled 2
stainless steel bar and sections Flat.0 /.0 (0 / 6L) Rolled Edge * Available in.0 (6L) 2 x * 0.28 20 x * 0. 2 x * 0.9 0 x * 0. 0 x * 0.9 0 x *.9 60 x.2 x.8 00 x 2. 2 x * 0. 20 x * 0.9 2 x * 0.99 0 x *.9 0 x *.8 0 x *.98 60 x * 2. x * 2.96 00 x *.9 2 x 6* 0. 20 x 6* 0.9 2 x 6*.9 0 x 6*.2 x 6.66 0 x 6*.90 x 6 2. 0 x 6* 2. 60 x 6* 2.8 6 x 6.08 x 6*.6 80 x 6*.9 00 x 6.0.92 2 x 6*.9 0 x 6*. 200 x 6* 9.8 2 x 8*.8 0 x 8*.90 0 x 8* 2. 0 x 8*.6 60 x 8*.9 x 8*. 00 x 8* 6.2 0 x 8 9.8 200 x 8 2.6 2 x 0*.98 0 x 0* 2. 0 x 0*.6 0 x 0*.9 60 x 0*. 6 x 0. x 0*.9 80 x 0 6.2 00 x 0*.90 2 x 0* 9.9 0 x 0*.8 200 x 0*.80 0 x 2.9 0 x 2*. 60 x 2*.69 x 2*. 00 x 2* 9.8 2 x 2.8 (0 x 2*).2 28 Brackets denote available in 6L only.
stainless steel bar and sections 6 x 6 0.9 0 x 0 0.86 2 x 2. 6 x 6 2.02 20 x 20.6 2 x 2.9 20 x 20 x.0 0.9 2 x 2 x.0.2 2 x 2 x.0.9 2 x 2 x 6.0 2.2 0 x 0 x.0. 0 x 0 x.0 2.6 0 x 0 x 6.0 2.6 0 x 0 x.0.99 0 x 0 x.0.22 0 x 0 x 6.0.82 0 x 0 x.0 2.0 0 x 0 x.0.08 0 x 0 x 6.0.8 0 x 0. ( 2 x 2 ).8 0 x 0 2.60 0 x 0 9.80 Brackets denote available in 6L only. 0 x 0 x 0.0. 60 x 60 x.0.9 60 x 60 x 6.0.88 60 x 60 x 0.0 9.6 0 x 0 x 6.0 6.9 0 x 0 x 0.0.8 x x 6.0. x x 0.0.9 80 x 80 x 6.0.9 80 x 80 x 0.0 2.80 00 x 00 x 6.0 0.0 00 x 00 x 0.0 6. Square.0 /.0 (0L / 6L) ANGLE.0 (0L) 20 x 20 x.0 0.9 2 x 2 x.0.2 0 x 0 x.0. 0 x 0 x.0.99 0 x 0 x.0 2.0 2 x 2 x.0.9 0 x 0 x.0 2.6 0 x 0 x.0.22 0 x 0 x.0.08 2 x 2 x 6.0 2.2 0 x 0 x 6.0.82 0 x 0 x 6.0.8 60 x 60 x 6.0.88 0 x 0 x 6.0 6.9 x x 6.0. 80 x 80 x 6.0.9 00 x 00 x 6.0 0.0 0 x 0 x 0.0. 60 x 60 x 0.0 9.6 0 x 0 x 0.0.8 x x 0.0 2.0 80 x 80 x 0.0 2.90 00 x 00 x 0.0 6. ANGLE.0 (6L) 29
stainless steel rolled products SHEET.0 (0) Polished 20 grit, white poly coat 2000 x 000 x 0.. 200 x 20 x 0..9 2000 x 000 x 0.9* L. 000 x 00 x 0.9.2 200 x 20 x 0.9* L 2.0 2000 x 000 x.0 6. 200 x 20 x.0 2.6 2000 x 000 x.2* L 9.6 200 x 20 x.2* L.2 000 x 00 x.2* L.2 2000 x 000 x.* L 2.6 200 x 20 x.* L 8. 000 x 00 x. L. 2000 x 000 x 2.0* L 2. 200 x 20 x 2.0* L.2 000 x 00 x 2.0 2. 2000 x 000 x 2. 0.9 200 x 20 x 2. 6.9 000 x 00 x 2. 92. 2000 x 000 x.0 9.6 200 x 20 x.0. 000 x 00 x.0 2.0 *Also stock in 20 silicon, white poly coated. L= Also stock Laser Coated. SHEET.0 (6L) Polished 20 grit, white poly coat 2000 x 000 x.2 9.6 200 x 20 x 0.9 2.0 200 x 20 x.2.2 200 x 20 x.* L 8. 000 x 00 x.. 000 x 00 x 2.0* L 2. 2000 x 000 x 2.0 2. 200 x 20 x 2.0.2 200 x 20 x.0. LASER AND FIBER OPTIC COATING AVAILABLE. SHEET.06 (0) Polished 20 grit, white poly coat 0 200 x 20 x 0..9 2000 x 000 x 0.9. 200 x 20 x 0.9 2.0 000 x 00 x 0.9. 000 x 00 x.0 6.8 000 x 00 x.2.2 000 x 00 x..2 2000 x 000 x.2 9.6 200 x 20 x.2 0. 2000 x 000 x. 2.6 200 x 20 x. 8. We have in-house facilities for Plastic Coating and Polishing Sheets. Circle polishing is available on a limited number of sizes.
stainless steel rolled products 2000 x 000 x 0. 8.2 200 x 20 x 0. 2.8 2000 x 000 x 0.6 9.82 200 x 20 x 0.6. 2000 x 000 x 0.. 200 x 20 x 0..9 2000 x 000 x 0.8.09 200 x 20 x 0.8 20. 2000 x 000 x 0.9. 200 x 20 x 0.9 2.0 000 x 00 x 0.9.2 2000 x 000 x.0 6. 200 x 20 x.0 2.6 2000 x 000 x.2 9.6 200 x 20 x.2 0. 000 x 00 x.2.2 2000 x 000 x. 2.6 200 x 20 x. 8. 000 x 00 x.. 2000 x 000 x 2.0 2. 200 x 20 x 2.0.2 000 x 00 x 2.0. 2000 x 000 x 2. 0.9 200 x 20 x 2. 6.9 000 x 00 x 2. 92. 2000 x 000 x.0 9.6 200 x 20 x.0. 000 x 00 x.0 2.0 SHEET.0 (0) 2B Finish 2000 x 000 x 0. 8.8 200 x 20 x 0. 2.2 2000 x 000 x 0.6 9.6 200 x 20 x 0.6. 2000 x 000 x 0.. 200 x 20 x 0..9 2000 x 000 x 0.9. 200 x 20 x 0.9 2.0 2000 x 000 x.2 9.6 200 x 20 x.2 0. 000 x 00 x 0.9 2. 000 x 00 x.2.2 2000 x 000 x. 2.6 200 x 20 x. 8. 000 x 00 x.. 2000 x 000 x 2.0 2. 200 x 20 x 2.0.2 000 x 00 x 2.0. 2000 x 000 x 2. 0.9 200 x 20 x 2. 6.9 000 x 00 x 2. 92. 2000 x 000 x.0 9.6 200 x 20 x.0. 000 x 00 x.0 2.0 SHEET.0/.0 (6/6L) 2B Finish 2000 x 000 x 0. 8.2 200 x 20 x 0. 2.8 2000 x 000 x 0.6 9.82 200 x 20 x 0.6. 2000 x 000 x 0.. 200 x 20 x 0..9 200 x 20 x 0.8 20. 2000 x 000 x 0.9. 200 x 20 x 0.9 2.0 2000 x 000 x.0 6. 200 x 20 x.0 2.6 2000 x 000 x.2 9.6 200 x 20 x.2 0. 2000 x 000 x. 2.6 200 x 20 x. 8. 2000 x 000 x 2.0 2. 200 x 20 x 2.0.2 SHEET.0 (0) 2R (BA) Finish
stainless steel rolled products SHEET.06 (0) 2R (BA) Finish 2000 x 000 x 0. 8.2 200 x 20 x 0. 2.8 2000 x 000 x 0.. 200 x 20 x 0..9 2000 x 000 x 0.9. 200 x 20 x 0.9 2.0 2000 x 000 x.0 6. 200 x 20 x.0 2.6 2000 x 000 x.2 9.6 200 x 20 x.2 0. 2000 x 000 x. 2.6 200 x 20 x. 8. 2000 x 000 x 2.0 2. 200 x 20 x 2.0.2 per plate (Kg) per plate (Kg) PLATE COLD ROLLED DESCALED.0 (0L) 000 X 2000 X. 98.0 000 x 2000 x 2.0 28.0 000 X 2000 X 2. 6.0 000 x 2000 x.0 92.0 2000 x 000 x.0 6.0 200 x 20 x.0 00.0 000 x 00 x.0.0 2000 x 000 x.0 9.8 200 x 20 x.0 2.0 000 x 00 x.0 80.0 000 X 2000 X.0 26.0 000 x 2000 x.0 20.0 2000 x 000 x 6.0 96.0 200 x 20 x 6.0 0.0 000 x 00 x 6.0 26.0 000 x 2000 x 6.0 8.0 per plate (kg) PLATE COLD ROLLED DESCALED.0 (6L) 2 000 x 2000 x 2.0 28.0 000 x 2000 x.0 92.0 2000 x 000 x.0 6. 200 x 20 x.0 00.0 000 x 00 x.0.0 000 x 2000 x.0 26.0 2000 x 000 x.0 80. 200 x 20 x.0 2.0 000 x 00 x.0 80.0 000 x 2000 x.0 20.0 2000 x 000 x 6.0 96. 200 x 20 x 6.0 0.0 000 x 00 x 6.0 26.0 000 x 2000 x 6.0 8.0
stainless steel rolled products per plate (Kg) per plate (Kg) 2000 x 000 x.0 8.0 200 x 20 x.0.0 000 x 00 x.0* 08.0 2000 x 000 x.0 6.0 200 x 20 x.0 00.0 000 x 00 x.0.0 000 x 2000 x.0 2.60 2000 x 000 x.0 80.0 200 x 20 x.0 2.0 000 x 00 x.0 80.0 000 x 2000 x.0 20.0 2000 x 000 x 6.0 96.0 200 x 20 x 6.0 0.0 000 x 00 x 6.0 26.0 000 x 2000 x 6.0 8.0 (6000 x 2000 x 6.0) 6.0 2000 x 000 x 8.0 28.0 200 x 20 x 8.0 200.0 000 x 00 x 8.0 288.0 Hot Rolled D Finish per plate (Kg) 2000 x 000 x.0 8.0 200 x 20 x.0.0 000 x 00 x.0 08.0 200 x 20 x.0 2.0 200 x 20 x 8.0 200.0 000 x 00 x 8.0 288.0 000 x 00 x 0.0 60.0 000 x 2000 x 8.0 2.0 2000 x 000 x 0.0 60.8 200 x 20 x 0.0 20.0 000 x 00 x 0.0 60.0 000 x 2000 x 0.0 60.0 6000 x 2000 x 0.0 960. 200 x 20 x 2.0 00.0 000 x 00 x 2.0 2.0 000 x 2000 x 2.0 8.0 200 x 20 x.0 8.0 000 x 00 x.0.0 200 x 20 x 20.0.0 000 x 00 x 20.0 8.0 *Available in 0L only Brackets denote available in 6L only. Cold Rolled 2B Finish 200 x 20 x.0 2. 2000 x 000 x.2 9.20 200 x 20 x.2 0.00 2000 x 000 x. 2. 200 x 20 x. 8.2 000 x 00 x..0 2000 x 000 x 2.0 2.6 000 x 00 x 2.0. 200 x 20 x 2.0 0.0 200 x 20 x 2. 6. CPP PLATE D Finish.0,.0, (0,0L).0,.0, (6,6L) PLATE/SHEET.00 Thickness on base Unit per plate (Kg) 000 x 000 x.0 8.0 000 x 20 x.0 9.0 000 x 20 x..0 000 x 20 x 6.0 80.0 STAINLESS TREADPLATE.0/.0 (0/0L) Pattern to DIN 9220
stainless steel seamless pipe SEAMLESS PIPE ASTM A2, 0L NPS/NB SCH SCH SCH 0S 0S 80S 8 2 2 2 2 2 6 8 SEAMLESS PIPE ASTM A2, 6L NPS/NB SCH SCH SCH SCH 0S 0S 80S 60 8 8 2 2 2 2 2 2 6 8
stainless steel seamless butt weld fittings NPS/NB EQUAL TEES END CAPS SCH SCH SCH SCH SCH SCH 0S 0S 80S 0S 0S 80S 2 * * * * * * * * * * * * 2 * * * * 2 * * * * * * 2 2 * * * * * * * * * * * * 6 * * * * 8 * 0 * 2 * SEAMLESS BUTT WELD FITTINGS ASTM A0, 6L NPS/NB 90 LR ELBOWS LR ELBOWS STUB ENDS SCH SCH SCH SCH SCH SCH SCH 0S 0S 80S 0S 0S 0S 0S 2 * * * * * * * * * / 2 * * * 2 * * * * * 2 / 2 * * * * * * * * * * 6 * * * * 8 * *Also stock from European sources.
stainless steel seamless butt weld fittings SEAMLESS BUTT WELD FITTINGS ASTM A0, 0L NPS/NB EQUAL TEES END CAPS SCH SCH SCH SCH 0S 0S 0S 0S 2 * * * * 2 2 * * * 2 2 * * * * * * NPS/NB 90 LR ELBOWS SCH SCH 0S 0S 2 * * / 2 * 2 * * 2 /2 * * * * * 6 * 8 * NPS/NB SCH CON RED SCH SEAMLESS BUTT WELD FITTINGS ASTM A0, 0L 6 0S 0S / x / 2 * x / 2 * x / * 2 x * 2 x * 2 X / 2 * x 2 * * x 2 * x * 6 x * 6 x *
stainless steel seamless butt weld fittings NPS/NB CON RED SCH SCH SCH 0S 0S 80S / x 2 * * x / 2 * * x * / x * / x / 2 x 2 * * / 2 x / * * 2 x * * / 2 x / 2 x / * 2 x * * 2 x / 2 x / 2 * * 2 / 2 x * 2 / 2 x / 2 * 2 / 2 x 2 * x * x / 2 * x 2 * * * x 2 * * x 2 / 2 x * * 6 x * * 6 x * * SEAMLESS BUTT WELD FITTINGS ASTM A0, 6L *Also stock from European sources.
stainless steel welded pipe WELDED PIPE ASTM A2, 0L & 6L ASTM A2, 0L NPS/NB SCH SCH SCH S 0S 0S 2 2 2 2 2 2 6 8 0 2 6 8 20 2 ASTM A2, 6L NPS/NB SCH SCH SCH S 0S 0S 2 2 2 2 2 / 2 6 8 0 2 6 8 20 2 8
stainless steel welded butt weld fittings WELDED BUTT WELD FITTINGS ASTM A0, 0L NPS/NB 90 LR ELBOWS LR ELBOWS EQUAL TEES STUB ENDS SCH SCH SCH SCH SCH SCH SCH 0S 0S 0S 0S 0S 0S 0S 2 2 2 2 2 6 8 0 2 9
stainless steel welded butt weld fittings WELDED BUTT WELD FITTINGS ASTM A0, 6L NPS/NB 90 LR ELBOWS LR ELBOWS EQUAL TEES STUB ENDS SCH SCH SCH SCH SCH SCH SCH 0S 0S 0S 0S 0S 0S 0S 0S 2 2 2 2 2 6 8 0 2 6 8 20 2 0
stainless steel welded butt weld fittings NPS/NB CON RED ECC RED RED TEES SCH SCH SCH SCH SCH SCH 0S 0S 0S 0S 0S 0S / x 2 x 2 x / x / x / 2 x 2 / 2 x / / 2 x / 2 x / 2 x 2 x / 2 x / 2 2 / 2 x / 2 2 / 2 x 2 x x / 2 x 2 x 2 / 2 x 2 x 2 / 2 x 6 x 6 x 8 x 8 x 8 x 6 0 x 0 x 6 0 x 8 2 x 6 2 x 8 2 x 0 WELDED BUTT WELD FITTINGS ASTM A0, 0L
stainless steel welded butt weld fittings NPS/NB CON RED ECC RED RED TEES SCH SCH SCH SCH SCH SCH 0S 0S 0S 0S 0S 0S WELDED BUTT WELD FITTINGS ASTM A0, 6L / x 2 x 2 x / x / 2 / x x / 2 x 2 / 2 x / 2 x / 2 x / 2 x 2 x / 2 x / 2 2 / 2 x / 2 2 / 2 x 2 x x / 2 x 2 x 2 / 2 x / 2 x 2 x 2 / 2 x x x 6 x 6 x 6 x 8 x 8 x 6 0 x 0 x 6 0 x 8 2 x 6 2 x 8 2 x 0 2
stainless steel flanges FLANGES ASTM A82, ANSI B6. Type 0L Type 6L NPS/NB 0lb 00lb 0lb 00lb RFWN RFWN RFWN RFWN 0L 0L 6L 6L SCH SCH SCH SCH SCH SCH SCH SCH SCH SCH 0S 0S 80S 0S 0S 0S 80S 0S 0S 80S 2 * * * * * * * * * * * * * * * * * * * * * * / * * * * 2 * * * * * 2 * * * * * * * * 2 2 * * * * * * * * * * * * * * * * * * 6 * * * * * * 8 * * * * 0 * * * * 2 * * * 6 * 8 * 20 * 2 * *Also stock from European sources.
stainless steel flanges Type 0L & 6L NPS/NB 0lb RFSO 00lb RFSO 0lb RFB 00lb RFB 0L 6L 0L 6L 0L 6L 0L 6L 2 * * * * * * * * * * * * * * * * * * * * * * * * * * 2 * * * * * * * * 2 * * * * * * * * 2 2 * * * * * * * * * * * * * * * * * * * * 6 * * * * * * * 8 * * * * 0 * * * 2 * * * * * * 6 * * * 8 * * 20 * * 2 * * *Also stock from European sources. NPS/NB PN6/0 RFSO PN6/0 RFSO PN6/0 RFB TABLE E SLIP ON TABLE E BLIND EN092 0L EN092 6L EN092 6L BS0 6L BS0 6L 2 2 2 2 2 6 8 FLANGES ASTM A82, ANSI B6.
stainless steel BSP fittings BSP Fittings Type 6 BSP FITTINGS BSP 0lb Fittings size /8 / /8 /2 / / /2 2 2/2 Equal Socket 90º Elbows (female) Half Socket Hexagon Union Square Head Plug Barrel Nipples Hexagon Head Plug Hexagon Nipples Round Blank Cap Weld Nipples Hexagon Back-Nut Equal Tee Ball Valve BSP 0lb Fittings size Hexagon Reducing Bush Hexagon Reducing Nipples Reducing Socket / - /8 /8 - /8 /8 - / /2 - / /2 - /8 / - / / - /8 / - /2 - / - /2 - / / - / 2 - / 2 - / / 2 - /2 2 - / 2
stainless steel seamless tube Type 6 / 6L SEAMLESS TUBE ASTM A269 O/D Wall (swg) ¹/₈ 2 ¹/₈ 22 ¹/₈ 20 ³/₁₆ 2 ³/₁₆ 22 ³/₁₆ 20 ³/₁₆ 8 / 22 / 20 / 8 / 6 ⁵/₁₆ 22 ⁵/₁₆ 20 ⁵/₁₆ 6 O/D Wall (swg) ³/₈ 22 ³/₈ 8 ³/₈ 20 ³/₈ 6 ³/₈ ⁷/₁₆ 20 /2 22 /2 20 /2* 8 /2 6 /2 /2 ¹/₈ ⁵/₈ 20 ⁵/₈ 8 ⁵/₈ 6 ⁵/₈ ⁵/₈ ¹/₈ / 20 / 8 / 6 / O/D Wall (swg) * Denotes available in 0/0L Grade. / 2 / 0 ⁷/₈ 6 20 * 8 6 2 0 / 6 / / ¹/₈ /2 6 /2 ¹/₈ 2 ¹/₈ 2 ¹/₈ 2/2 / 6 0 / 6 O/D Wall 6 0. 6*.0 6. 8.0 8. 0*.0 0. 0 2.0 2*.0 2. 2 2.0 *. 6. 6 2.0 8. 20. 20 2.0 22. 2. 2 2.0 2 2. 2.0 * Denotes available in 0/0L Grade.
stainless steel handrail tube O/D Wall per Mtr Grades (kg) Available 2.mm 2.0 2.0 0 & 6 2.mm 2. 2.8 0 & 6 8.mm 2.0 2.0 0 & 6 8.mm 2. 2.8 0 & 6 60.mm 2.0 2.90 0 & 6 60.mm 2..60 0 & 6 Slotted Handrail Tube O/D Wall per Mtr Grades (kg) Available HANDRAIL TUBE We stock the following sizes/grades all with satin polished O/D 20 and 20 GRIT POLISH AVAILABLE 2.mm.. 0 & 6 8.mm. 2.2 0 & 6 O/D Wall 2. 2 2.0 2 2. 2.0
stainless steel hygienic tube O/D Wall per Mtr (swg) (kg) HYGIENIC TUBE Welded and annealed satin polished, BA and also descaled Type 0L and Type 6L 6 0.99 / 2 6. 2 6.88 2 / 2 6 2.9 6.0 6.0.98 O/D Wall per Mtr (kg) HYGIENIC TUBE as welded not annealed, satin polished and also descaled Type 0L and Type 6L.0 0.90 / 2.0.8 2.0.8 2 / 2.0 2..0 2.8.0. 2.00.02 8
Stainless Steel Hygienic Fittings s to stainless steel hygenic fittings RJT Hexagon Nuts RJT Weld Liners RJT Weld Males RJT Joint Rings RJT Plain Blank RJT Blank Nut and Chain IDF Hex Nuts IDF Weld Liners IDF Weld Males IDF Joint Rings IDF Plain Blank Clamp Union Clamp Clamp Ferrule Clamp Blank Clamp Seal / Joint Ring ISO 90 Bends Polished ISO Bends Polished ISO 90 Bends Descaled ISO Bends Descaled Concentric Reducers Equal Tee Polished Equal Tee Descaled Pulled Tee Polished Pulled Tee Descaled Pulled Red. Tee Polished Pulled Red. Tee Descaled Hinged Pipe Clips Saddle Clips (Blue Insert) 9
stainless steel structural & decorative tube ROUND 0 Welded Mirror Polished ROUND 6 Welded Mirror Polished ROUND 0 Welded Dull Polished 0 O/D Wall per metre (kg) 2.0 0.2 8.20 0. 8.0 0..22 0..0 0.66 8.20 0.6 8.0 0.8 8 2.00.0.20 0..0 0.90.20 0.92 O/D Wall per metre (kg) 2.0 0.2 8.20 0. 8.0 0. 9mm.20 0..0 0.66 8.20 0.6 8.0 0.8.20 0..0 0.90 2.00..0. 2.0.8 2.0.8 2 2.00 2. 2.00.9 O/D Wall per metre (kg).0. 2.20. 2.0.8 2 2.00.8.0.62 2.20.9 2.0.8 2 2.00 2.0 2.00.6 2 2.0 2..0 2.8 O/D Wall per metre (kg) *. 0.6 *. 0.89 * 2..6 * / 2 2.0.9 * / 2.0 S 2.6 * 2..8 * 2 2.0 2.2 * 2.0 S.6 * *.0 S..0. S denotes also available in Satin Polish. *Also stock brushed finish
stainless steel structural & decorative tube O/D Wall per metre (kg) S denotes also available in Satin Polish. *Also stock brushed finish *. 0.66 *. 0.90 * 2..8 * 2..8 * 2.00 S 2.6 * 2 2.0.0 * 2.00 S. *.00 S.2 *.00 S.2 ROUND 6 Welded Dull Polished Dimensions Wall per metre (kg) 80 x 0.00.22 80 x 0.00 8.90 00 x 0.00.2 20 x 80.00 9. 20 x 80.00.8 0 x 00.00.66 0 x 00.00.0 0 x 00.00 8.80 0 x 00 6.00 22.60 Dimensions Wall per metre (kg) 0 x 00 8.00 2.90 200 x 00.00 8.60 200 x 00.00 22.0 200 x 00 6.00 2.0 RECTANGULAR 6 Welded Unpolished Dimensions Wall per metre (kg) 0 x 20.0. 0 x 2.0. 60 x 0 2.00.08 80 x 0 2.00.98 Dimensions Wall per metre (kg) 80 x 0.00.9 00 x 0 2.0.68 00 x 0.0 6.9 RECTANGULAR 6 Welded Dull Polished
stainless steel structural & decorative tube RECTANGULAR 0 Welded Unpolished Dimensions Wall per metre (kg) 80 x 0.00.22 80 x 0.00 8.90 00 x 0.00 9.09 00 x 0.00.0 20 x 60.00 8.9 20 x 60.00.0 20 x 60.00. 20 x 80.00 9. 20 x 80.00 2.0 20 x 80.00.8 0 x 0.00 9. 0 x 0.00.8 0 x 00.00.0 Dimensions Wall per metre (kg) 0 x 00.00.0 0 x 00.00 8.80 0 x 00 6.00 22.60 0 x 00 8.00 2.90 200 x 00.00.06 200 x 00.00 8.60 200 x 00.00 22.60 200 x 00 6.00 2.0 200 x 00 8.00.0 200 x 00 0.00.6 20 x 0 6.00 6.8 20 x 0 8.00.2 RECTANGULAR 0 Welded Dull Polished 2 Dimensions Wall per metre (kg) 20 x 0.0 0. 0 x 0.20 0. 0 x 0.0 0.90 0 x.0 0.6 0 x 20.0. 0 x.0.2 0 x 20.20.0 0 x 20.0. 0 x 20 2.00.8 0 x 2.20. 0 x 2.0. 0 x 2 2.00 2. 0 x 2.00. 0 x 0.0.8 0 x 0 2.00 2. 0 x 0.00.6 60 x 20.0.8 60 x 0.0 2.2 60 x 0 2.00 2.80 60 x 0.00. 60 x 0.0 2.2 Dimensions Wall per metre (kg) 60 x 0 2.00.08 60 x 0.00.6 80 x 0.0 2.80 80 x 0 2.00. 80 x 0.00.9 80 x 60.00 6. 00 x 0.00 6. 00 x 0 2.00.68 00 x 0.00 6.9 00 x 60.00. 20 x 60.00 8.2
stainless steel structural & decorative tube Dimensions Wall per metre (kg) 2. x 2..20 0. 2. x 2..0 0. x.20 0. x.0 0.6 20 x 20.20 0. 20 x 20.0 0.88 20 x 20 2.00.9 2 x 2.20 0.92 2 x 2.0. 2 x 2 2.00.9 2 x 2.00 2.20 0 x 0.20.0 0 x 0.0. 0 x 0 2.00.8 0 x 0.00 2.2 Dimensions Wall per metre (kg) 0 x 0.20.9 0 x 0.0.8 0 x 0 2.00 2. 0 x 0.00. 0 x 0.0 2.2 0 x 0 2.00.08 0 x 0.00.6 60 x 60 2.00. 60 x 60.00.9 0 x 0.00 6. 80 x 80 2.00.98 80 x 80.00. 00 x 00 2.00 6.0 00 x 00.00 9. SQUARE 0 Welded Dull Polished Dimensions Wall per metre (kg) 2. x 2..20 0. 2. x 2..0 0. 20 x 20.0 0.88 0 x 0.00.80 0 x 0.00.96 0 x 0.00. 60 x 60.00.22 60 x 60.00 8.90 80 x 80.00 9.82 80 x 80.00 2.9 00 x 00.00 2.0 00 x 00.00.8 00 x 00 6.00.0 00 x 00 8.00 2.60 Dimensions Wall per metre (kg) 20 x 20.00 8.66 20 x 20 6.00 2.20 20 x 20.0.80 20 x 20.0.00 0 x 0.00.06 0 x 0.00 8.60 0 x 0.00 2.00 0 x 0 6.00.20 0 x 0 8.00.0 0 x 0 0.00.6 200 x 200.00 8.62 200 x 200.00 0.80 200 x 200 6.00 6.90 200 x 200 8.00.2 200 x 200 0.00.60 SQUARE 0 Welded Unpolished
stainless steel structural & decorative tube SQUARE 6 Welded Dull Polished Dimensions Wall per metre (kg) 20 x 20.0 0.88 2 x 2.0. 2 x 2 2.00.0 0 x 0.0. 0 x 0 2.00.8 0 x 0.00 2.2 0 x 0.0.8 0 x 0 2.00 2. Dimensions Wall per metre (kg) 0 x 0.00. 0 x 0.0 2. 0 x 0 2.00.08 0 x 0.00.6 60 x 60.00.9 80 x 80.00. 00 x 00.00 9. SQUARE 6 Welded Unpolished Dimensions Wall per metre (kg) 80 x 80.00 9.82 00 x 00.00 2.0 00 x 00.00.8 00 x 00 6.00.0 Dimensions Wall per metre (kg) 20 x 20.00.0 20 x 20.00 8.66 20 x 20 6.00 2.20 0 x 0.00 8.6 0 x 0.00 2.00 0 x 0 6.00 2.6 SQUARE 0 Welded Dull Polished Dimensions Wall per metre (kg) 2 x 2.20 0.92 0 x 0.20.0 0 x 0.0. 0 x 0.0.8 SQUARE (.09) Welded Dull Polished Dimensions Wall per metre (kg) 2 x 2.20 0.9 0 x 0.20. 0 x 0.0. 0 x 0.0.86
stainless steel 000lb fittings Socket Welded 000lb Fittings NPS/NB 90 Degree Elbows Degree Elbows Equal Tee Full Couplings Union 0 6 0 6 0 6 0 6 0 6 2 2 2 NPS/NB Reducing Tees 0 6 NPS/NB Reducing Tees 0 6 / x / 2 X / 2 X / / 2 X / 2 / 2 X / / 2 X 2 X / 2 2 X / 2 X 2 X / 2 NPT Threaded 000lb Fittings NPS/NB 90 Degree Elbows Degree Elbows Equal Tee Full Couplings Union 0 6 0 6 06 0 6 0 6 / 8 / / 8 / 2 / / / 2 2 NPS/NB Half Couplings Cap Hexagon Nipple Hexagon Plug 0 6 0 6 06 0 6 / 8 / / 8 / 2 / NPS/NB Reducing Tees 0 6 / / 2 2 / x / 2 X / 2
stainless steel metric tube & fittings METRIC WELDED TUBE 0 and 6 per metre (kg) for given Wall Thickness in mm OD.mm 2.0mm.0mm 28 0.99 0.8 8..6. 2..9 2.8 69. 0. 8.06 8.9 0.8 0.2 29 6.6.69.6 20 0.2 206.2 2.9 26 9.0 0.2 6 26.9 06 0. 06.9 606. The Metric Fittings Range Includes º & 90º Elbows Radius D+00 º & 90º Elbows Radius.D Pulled Equal Tees Pulled Reducing Tees Concentric Reducers Eccentric Reducers Pressed Collars Pressed End Caps Mild Steel Backing Flanges Zinc Plated 6
Offices and long products facility The Metal Centre Western Way Wednesbury WS0 BW Sheet and stockholder collections facility Unit 6 Parkway Industrial Estate Wednesbury WS0 WS tel: + (0) 2 2 200 fax: + (0) 2 2 0 email: sales@themetalcentre.com www.themetalcentre.com Credit Centre tel: + (0)20 00 fax: + (0)20 0 RS 00