PRELIMINARY HD Integrated Camera AW-HE50S/H Compact Live Switcher AW-HS50 Remote Camera AW-RP50 The Compact New 50 Series: Production Quality Video with IP Network Control HD Integrated Camera AW-HE50S/H Remote Camera AW-RP50 Compact Live Switcher AW-HS50
Actual Size 178 mm 160 mm Rear AW-HE50S AW-HE50H
Small and Versatile: 1/3-inch Full-HD MOS Integrated Pan-Tilt/Cameras with Production Quality HD/SD Video HD Integrated Camera AW-HE50S [SDI Model] NEW Wireless Remote (option) AW-RM50 *Two AA size batteries required (batteries not included) HD Integrated Camera AW-HE50H [HDMI Model] NEW Multi-interface Cable (option) AW-CA20T6 1080/50i,720/50p 576/50i 1/3-inch Full-HD MOS Sensor with 18x HD Optical Zoom & 10x Digital Zoom Innovative Features Deliver Realistic, Production Quality HD Video Dynamic Range Stretch (DRS) The gamma curve and knee slope are optimized to match the contrast of each pixel in real time. This increases the dynamic range without affecting the normal pixels. Setting camera menus with a PC Camera menus can be set up via a web browser by connecting the AW-HE50S/H to a PC. Configuration window on the web browser DRS OFF: With the iris expanded, this blown highlight appears on the blackboard DRS OFF: With the iris contracted, DRS ON: Both highlights and a blocked shadow appears shadows are clearly visible on the figure Hybrid (2D/3D) Noise Reduction The innovative Hybrid (2D/3D) Noise Reduction function also suppresses afterimages, even in difficult lighting conditions. [dark place] loss of loss resolution of resolution Without Noise Reduction Some noise is evident when gain control is turned up afterimage afterimage 3D Noise Reduction Alone Afterimage and some loss of resolution is seen The Hybrid (2D/3D) Noise Reduction Clearer images in difficult conditions Quick integration, thanks to simple connections, IP control, and included Turn-lock mount Flesh Tone Mode Flesh Tone Mode produces a more pleasing and realistic picture. Turn-lock mechanism Weight: Approx. 1.4 kg Flesh Tone Mode:OFF Flesh Tone Mode:ON The effectiveness may be affected by lighting, etc. So easy to install can be done by one person
Small and Powerful: An Easy-to-Use Camera with Great Features Remote Camera AW-RP50 NEW Simple to connect and operate, with both IP and Serial control functions Up to a hundred AW-HE50S/H units can be controlled via IP connections when using Ethernet hubs. IP addresses are automatically assigned to the AW-HE50S/H or AW-HS50 by the Automatic IP Address Setup function. One remote camera can be controlled simultaneously by up to five AW-RP50 units via an IP connection. Various settings for the AW-RP50 can be configured with a PC (configuration software supplied). IP-control performance depends on network conditions. Video signals cannot be transmitted via IP. Serial Control also Supported Conventional Controlled Via IP Camera 1 Camera 1 Camera 2 Camera 3 Each camera could not be operated by multiple controllers Camera 4 Camera 1 Camera 2 Camera 3... Up to 100 cameras can be HUB connected. Each camera can be operated by multiple controllers Up to 5 existing Panasonic pan-tilt heads*, integrated cameras** and box cameras*** such as the AW-HE50S/H, etc. can be linked using the serial control (RS-422 protocol). * Compatible models: AW-PH405, AW-PH400, AW-PH360, AW-PH650 ** Compatible model: AW-HE100 *** Compatible models: AK-HC1800, AK-HC1500, AW-HE870, AW-E860, AW-E750, AW-E655, AW-E650, AW-E350 PC 177 mm Controlled Via Serial Ports Camera 3 Camera 4 Camera 2 Camera 5 Camera 1 Controlled Via IP/ Serial Mixed Camera 3 Camera 4 Camera 2 Camera 5 UP to 95 AW-HE50 units 5 RS-422 Ports Camera 1 Number of cameras when RS-422 and an IP interface are used together: Up to 100 HUB LAN RS-422 Linking the AW-HS50 to IP control enables highly efficient and stress-free operations The camera setting information (such as iris and gain) acquired by the unit is displayed through the AUX output of the switcher or on the split-screen of MultiViewer. Acquires the ON AIR tally information of the switcher and lights the tally LED on the panel. Bus images can be changed by linking them to the camera selection (control bus targets: AUX, PVW, PinP, KEY-F). The switcher's MultiViewer screen can be changed to the camera image full screen with a one-touch button operation. *Control bus target: AUX only Parameters such as the PinP position of the switcher can be changed with the pan/tilt lever. Conventional Switcher Controlled Via IP Camera 1 Camera 2 Camera 3 Camera 4 HUB Previously, single operator system control was hard to achieve. Switcher Camera 5 Camera 1 Camera 2 Camera 3... Up to 100 cameras can be connected. 50 Series Switcher and linked for streamlined operation. AW-RP50 Main Specifications Protocol Connection Remote Camera Control Switcher Control Adjustment functions Connection Supported Switcher Linkage IPv4,RS422 (Panasonic AW series protocol) Serial : Up to 5 cameras IP : Up to 100 cameras Pan/Tilt (Joystick),Zoom (Seesaw Switch), Focus, Iris, Gain, Pedestal, Shutter, Detail,White Balance (Auto, Adjust R/B Gain),Black Balance(Auto, Adjust R/B Pedestal),Switch scene files IP: 1 AW-HS50 Camera Send,Tally Receive,Switcher BUS selection Pan/Tilt (Joystick)(PinP positioning etc...) Interface LAN TO PAN/TILT HEAD TALLY/GPI 10BASE-T/100BASE-TX (for IP control) RS422 (for Serial control) TALLY INPUT x 5 channels GPI INPUT x 4 channels GPI OUTPUT x 4 channels RJ45 x 1 RJ45 x 5 D-sub 15 pin (female) x 1 Operating Temprature 0 to 40 Operating Humidity 10 % to 90 % (no condensation) Power Supply DC12 V ±10 %, 0.5 A [TBD] DC IN x 1 Dimensions (W x H x D) 210 mm x 65 mm x 177 mm [TBD] (excluding protrusions) Weight Approx. 1.1 kg [TBD] (without options) Standard Accessories AC Adaptor, Power Cable Be sure to use the included AC adaptor and power cable 65 mm
Full rack size with the AW-RP50 and AW Actual Size 210 mm
-HS50 positioned alongside each other Actual Size 210 mm
Small and Professional: A High-Performance HD/SD Live Switcher with Built-in MultiViewer Compact Live Switcher AW-HS50 NEW 5 inputs and 3 outputs Standard features include 5 inputs (4 HD/SD-SDI, 1 DVI-D) and 3 outputs (2 HD/SD-SDI, 1 DVI-D). 1080/59.94i,1080/50i, 1080/23.98PsF,1080/24PsF 720/59.94p,720/50p 480/59.94i,576/50i 177 mm MultiViewer display functionality comes installed as standard The built-in MultiViewer can display up to ten image windows at one time on a single monitor, including program, preview, inputs, and more! Audio Level Meter Display Function Embedded audio levels of SDI inputs can be displayed. (1 ch, 2 ch) Bus Transition Functions Cut and Mix transitions are available through AUX bus and PinP bus. Frame Synchronizers on All Inputs Frame Synchronizer is embedded in all inputs. This enables asynchronous video signals to be switched without glitches. (SDI-IN1 to 4 10 bit, DVI-IN 8 bit) Audio Level Meter 13 wipe patterns 65 mm More Powerful Features 2 Switchable Up-converters. (SDI-IN3,IN4) Color Correction on SDI Inputs (SDI-IN1 to 4) for convenient matching of video sources. Dot-by-Dot feature on 4 inputs (SDI-IN1 to 4) enables insertion of SD images into HD frames with virtually no image distortion. 13 wipe patterns, plus PinP, Chroma/Linear Key, Aux Bus. Circle Heart Star Flower Border ON/ OFF, Color, Wide, and Blur are selectable
AW-HE50 Main Specifications Image Elements Lens Focus Horizontal Resolution Minimum Illumination S/N Gain Selection Shutter Speed Gamma White Balance Variable Chroma Levels Scene Files Color Bar Output Format Video Output LAN Interface RS-422 Synchronization System Rotation Range Rotation Speed Noise Stopping Accuracy Power Supply Operating Temperature Operating humidity Dimensions (W x H x D) Weight Standard Accessories AW-HE50S (SDI Model) AW-HE50H (HDMI Model) 1/3-inch Full-HD MOS 18x HD Zoom Lens F1.6 to 2.8 (f=4.7 to 84.6 mm,35 mm conversion: 36.9 mm to 664.5 mm) Auto/Manual switchable 850 TV Lines (Center) 3 lx (50 IRE, F1.6, +36 db) 54 db 0,3,6,9,12,15,18 db/agc 0 db,6 db,12 db,18 db (Integral mode) Step 1/100,1/250,1/500,1/1000,1/2000,1/4000,1/10000 Syncro-scan 60.24 Hz to 646.21 Hz OFF,Low,Mid,High,Cinema AWB A,AWB B,ATW 7 levels Full-Auto,Manual Full-Bar HD: 1080/50i, 720/50p SD: 576/50i HD/SD-SDI HDHDMI HD/SD analog component* HD/SD analog component* Composite* Composite* 10BASE-T/100BASE-TX, IPv4 RJ45 x 1 AW-series protocol, plus selected third-party support* Internal/External synchronization (BBS) Internal synchronization Pan: -175 to +175 degrees, Tilt: -30 to +90 degrees Over 90 /s (at maximum) NC35 (Moving normaly), NC40 (When Preset recalled) PAN/Tilt ±0.3 DC12 V ±10 %, 1.3 A DC12 V ±10 %, 1.2 A 0 C to +40 C 20 % to 90 % (no condensation) 160 mm x 178 mm x 166 mm [TBD] (excluding the cable cover and mounting brackets) Approx. 1.4 kg Mounting Bracket (for table or ceiling), Mounting Bracket (for main unit), Mounting Screws, AC Adaptor, Power Cable, Cable Cover Be sure to use the included AC adaptor and power cable *Breakout cable required AW-HS50 Main Specifications Video Format Video Processing M/E Video Input Video Output Frame Memory Memory Function LAN Interface TALLY/GPI Power Supply Operating Temperature Operating Humidity Dimensions (W x H x D) Weight Standard Accessories HD (1080/59.94i, 1080/50i, 1080/23.98PsF, 1080/24PsF, 720/59.94p, 720/50p) SD (480/59.94i, 576/50i) Y:Cb:Cr, 4:2:2 10 bit (8 bit for FMEM) RGB, 4:4:4 8 bit 1 M/E Standard: 4 SDI inputs (SDI-IN 1 to 4) Standard: 1 DVI-D input (DVI-IN) XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical frequency: 60 Hz 1080/50p, 1080/59.94p Standard: 2 SDI outputs (SDI-OUT1 to 2 each, 2 output distribution for SDI-OUT1) Standard: 1 DVI-D output (DVI-OUT) XGA (1024 x 768), WXGA (1280 x 768), SXGA (1280 x 1024), WSXGA+ (1680 x 1050), UXGA (1600 x 1200), WUXGA (1920 x 1200) Vertical frequency: 60 Hz 1080/50p, 1080/59.94p 2 channels The image data in the Frame Memory is stored even when the power is off. Video processing for the Frame Memory is 8-bit. OSD, Frames, Labels, Tally indications, camera setting information, and Audio Level Meters for MultiViewer are not stored in the Frame Memory. Wipe Reset, PinP Preset Effect Dissolve Function 10BASE-T/100BASE-TX (for IP control) RJ45 x 1 GPI INPUT x 5 channels D-sub 15 pin GPI OUTPUT x 7 channels (female) x 1 DC12 V ±10 %, 2.5 A [TBD] 0 C to +40 C 10 % to 90 % (no condensation) 210 mm x 65 mm x 177 mm [TBD] (excluding protrusions) Approx. 1.4 kg [TBD] (without options) AC Adaptor, Power Cable Be sure to use the included AC adaptor and power cable BKGD FTB KEYER PinP AUX BUS Input Function Output Function Wipe/DVE pattern Transition Type Selectable Materials Number of Keys Key Type Transition Type Number of PinP Transition Type BUS Transition Number of AUX BUS Selectable Materials BUS Transition Frame Synchronizer Freeze Dot by Dot Video Processing Up-converter MultiViewer OSD Audio Level Meter Wipe x 13 Cut, Mix, Wipe (including DVE) Black, White, CBGD, FMEM1, FMEM2 1 Linear key, Luminance key, Chroma key Mix 1 Mix Yes (Mix) 1 SDI-IN1 to 4, DVI-IN, CBGD, BLACK, FMEM1, FMEM2, PGM, PVW, KOUT, CLN, MV Yes (Mix) SDI-IN1 to 4, DVI-IN (DVI-IN is always-on) SDI-IN1 to 4, DVI-IN SDI-IN1 to 4 SDI-IN1 to 4 SDI-IN3, IN4 Single Screen Display Labels, Tally indication, Split-screen (the screen may be split into 4, 5a/5b, 6a/6b, 9 and 10a/10b sections) MV frames, Labels, Tally indications, camera setting information, and Audio Level Meters are not shown on SDI-OUT1. Single Screen Display SDI-OUT2,DVI-OUT (unshown on SDI-OUT1) The MultiViewer frames are cleared when the borders between the OSD and the split-screen of MultiViewer cross. SDI embedded audio 1 ch, 2 ch Specifications and functions are subject to change without notice. The image on the screen is a composite image. Composite images, photographs, and illustrations are included for reference use only. AW-JEB50-2