Xitanium LED driver Datasheet Xitanium LED drivers linear HV non-isolated Enabling future-proof LED technology Xitanium LED drivers are designed to operate LED solutions for general lighting applications such as linear lighting, as well as down lighting and spot/accent lighting. Reliability is enhanced by specific features that protect the connected LED module, e.g. hot wiring, reduced ripple current and thermal de-rating. Most drivers feature central D operation. In the coming years LEDs will continue to increase in efficiency, creating generation and complexity challenges for OEMs. With Xitanium LED drivers, flexibility in luminaire design is assured thanks to an adjustable output current. Application-oriented operating windows offer the flexibility required to provide the stable lumen output and light quality levels that lighting specifiers and architects demand. enefits Features Application High reliability underpinned by 5 year Up to 95 efficiency, lowest cost and smallest 17W, 36W and 75W LED drivers for warranty Future-proof flexibility - dimensions Operating windows - output current can be adjusted office applications 110W and 150W LED drivers for application-oriented operating via the Philips MultiOne configurator (TD drivers) or industry, warehouses, public areas, windows enable LED generation and with a resistor outside the driver distribution centers and shopping complexity management ompatibility - adjustable output current enables operation of various LED solutions from different manufacturers or OEM own designs Flicker and noise free diing with all Touch and DALI LED drivers due to amplitude diing (AM) Reduced ripple current and thermal de-rating for increased reliability Multiple versions - DALI diable & prograable, 1-10V diable, and fixed-output; All T5 form factors but various lengths Longer life time (100khrs), improved surge and burst (4kV) and Tambient (-40 to +60 ) specifications malls
Electrical input data Rated input voltage range 220...240 Vac Rated input voltage 230 Vac Rated input frequency range 50...60 Hz Rated input current 0.17 A @ max output power @ rated input voltage Rated input power 39 W @ max output power @ rated input voltage Power factor 0.9 Total harmonic distortion 20 @ performance range Efficiency 90 @ max. output power @ rated input voltage Rated input voltage D range 186...250 Vdc Rated input current D range 0.17 Adc Input voltage A range 202...254 Vac Operational range Input frequency A range 47.5...63 Hz Operational range Input voltage D range 168...275 Vdc Operational range Standby Power (TD) 0.3 W Isolation input to output @ performance range Electrical output data Regulation method onstant urrent Output voltage 50...150 Vdc Output voltage max. 250 V Peak voltage at open load Output current 0.08...0.35 A Full output current setting Output current tolerance ±5 Output current ripple LF 4 Output current ripple HF 4 Output power 10...35 W Full output ontrol method Fixed Galvanic Isolation NA Ripple = peak / average Electrical data controls input Logistical data Product name Order code 871869670601500 Logistic code 12N 9290 015 57306 Pieces per box 24 2/7
Wiring & onnections Input wire cross-section 0.5...1.5 2 16...20 AWG Input wire strip length 8...9 Output wire cross-section 0.5...1.5 2 16...20 AWG Output wire strip length 8...9 Maximum cable length 2000 Total length of wiring including LED module, one way. For longer wiring please double check EMI behavior of luminaire. Dimensions and weight Length (A1) 280 Width (1) 30 Height (1) 16 Fixing hole diameter (D1) 4.1 Fixing hole distance (A2) 270 Weight 166 gram Operational temperatures and humidity Ambient temperature -25...+50 º Higher ambient temperature allowed as long as Tcase-max is not exceeded. Tcase-max 75 º lifetime 50khrs; Tcase-life 65 º lifetime 100khrs; Measured at Tc-point Maximum housing temperature 110 º In case of a failure Relative humidity 10...90 n-condensing 3/7
Storage temperature and humidity Ambient temperature -25...+85 º Relative humidity 5...95 n-condensing Driver lifetime 100,000 hours Measured temperature at Tcase-point is Tcase-life. Lifetime Maximum failures = 10 Mains switching cycles > 100,000 switches See Design-in guide for detailed explanation Remark Set output current (AO) SimpleSet See Design-in guide. Default output current: = 80 ma LED module temperature derating (MTP) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) orridor mode Energy metering Diagnostics Remark Prograable features Features Open load protection Yes Automatic recovering Short circuit protection Yes Automatic recovering Over power protection Yes Automatic recovering Hot wiring Suitable for fixtures with protection class I 4/7 per IE60598
ertificates and standards Approval marks / E / ENE Ingress Protection classification 20 Inrush current Inrush current Ipeak 15.3 A Input voltage 230V Inrush current Twidth 221 µs Input voltage 230V, measured at 50 Ipeak Drivers / M 16A type 37 pcs M Rating Relative number of LED drivers 10A 63 13A 81 16A 100 (stated in datasheet) 20A 125 25A 156 10A 104 13A 135 16A 170 20A 208 25A 260 Driver touch current / protective conductor current Typical protective conductor current (ins. lass I) < 0.4 ma rms Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 1 kv Acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 2 kv Acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Surge iunity 5/7
Graphs Operating window Power factor versus output power Efficiency versus output power 6/7
THD versus output power 2017 Philips Lighting Holding.V. All rights reserved. This document contains information relating to the Philips Lighting portfolio, intended for companies who may be interested in developing their product offering. te that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any coercial offer and does not form part of any quotation or contract. Date of release: June 14, 2017 www.philips.com/technology