LIQUID TIGT INDUSTRIL ENLOSURES & ESSORIES PGE PGE INTERNTIONL PPROVLS ISO 900 ertified PGE PGE PGES & 00 PGE & East insdale ve. Suite D entennial, O 00, U.S. Phone: 0.0.9 FX: 0.0. EMail: info@hitechcontrols.com Web Site: www.hitechcontrols.com Order Desk: 00..9
(GREY) D 900 D 90 D 00 D 0 D 900 D 00 K 900 K 00 K 900 K 00 K 90 K 0 K 900 K 00 OX LIQUID TIGT POLYSTYRENE ENLOSURES for Indoor Installations INES MM W D W D. x. x. x x. x. x. x x.9 x.9 x. 9 x 9 x. x. x. 9 x 9 x 0. x.9 x. x x.9 x. x.9 00 x 0 x 9. x. x. 0 x 0 x Reference our Web Site at www.hitechcontrols.com for our full product line & technical information! Dimensions W D DIN Rail SIDE PNEL ONFIGURTION No. of oles and Size M0 M0 M M + M/ 0 M/ 0 M/0 0 M/ + M0/0 GROMMETS INLUDED (IP, NEM ) x ESM 0 (M0) x ESM 0 (M0) x ESM (M) x ESM (M) x ESM (M) x ESM 0 (M0) with Mounting rackets PGE VDE 00 MOUNT WIT #UN SREWS Outside Lugs Outside Lugs For Strain Relief Fittings see Page or Web Site! NPT ubs Impact Resistant UV Resistant LIQUID TIGT POLYRONTE ENLOSURES LOGEN FREE for Outdoor and arsh Environments (Impact & UV Resistant) VDE 00 OX SIDE PNEL MOUNT WIT INES MM ONFIGURTION #UN SREWS (GREY) (LK) W D W D No. of oles and Size KF 900 KF 00 M0. x. x. x x KF 00 KF 900 KF 00 M.9 x.9 x. 9 x 9 x KF 00 KF 900 KF 00 M + M/. x. x. 9 x 9 x 0 KF 00 KF 900 KF 00 0 M/. x.9 x. x x KF 00 KF 90 KF 0 0 M/0.9 x. x.9 00 x 0 x 9 KF 0 KF 900 KF 00 0 M/ + M0/0. x. x. 0 x 0 x KF 00 Reference our Web Site at www.hitechcontrols.com for our full product line & technical information! For Strain Relief Fittings see Page or Web Site! SPEIFITIONS Liquid Tight: NEM x (IP) D/K SERIES KF SERIES Temperature: 0 F to F (0 to 00 ) Polycarbonate over Screws: 0 Stainless Steel MTERIL: Polystyrene (glass fiber reinforced) over Seal: TPE (Thermoplastic Elastomer) OLOR: Grey RL 0 Grey RL 0 Max. Voltage: 0 V N/ lack RL 90 Enclosure Sides: With Metric knockouts or smooth for custom drilling. The knockouts for Metric threads have the following diameters: M0 =.9", M =.9", M =.", M0 =.", M0 =.9".
E 09 LISTED LIQUID TIGT POLYRONTE ENLOSURES LOGEN FREE for Outdoor and arsh Environments (Impact & UV Resistant) (meets requirments, tested by ) listed enclosures with smooth sides and external mounting provisions can be used with DIN rail or mounting plate. The mounting brackets and hardware are also available as a kit. Order Number DK L to convert a standard series KF 000 enclosure into a listed enclosure ( only). D M W Reference our Web Site at www.hitechcontrols.com for our full product line & technical information! KF 00 KF 00 KF 00 KF 00 KF 0 D 00/900 KF 00/900. (). (9). () OX. (.) Size.09 (). () INES MM W D M W D M. x. x.. x x.9 x.9 x.. 9 x 9 x. x. x.. 9 x 9 x 0. x.9 x.. x x 9.9 x. x.9. 00 x 0 x 9 KF 00. () D 0 D 90. (9) K 0/90 KF 0/90 For Strain Relief Fittings see Page or Web Site! SIDE PNEL ONFIGURTION. (00).0 (9).0 (). (0). (9). (9).0 (). (9). (.) Size MOUNT WIT #UN SREWS rackets rackets rackets rackets rackets KF 0. ().0 (0). (9). ().9 (00). ().9 (). () Mounting oles with rackets with Lugs. (90).0 ().9 (00) D 00/900 KF 00/900. (9). (9). () Size.0 (). () KF 00. () Mounting oles with rackets. (9).99 (9). () K 00/900 KF 00/900. (9). (0). (0). (0).0 (). (). (.) Mounting oles. (.) Size. (0).0 () with rackets KF 00. () K 00/900 KF 00/900. (0).0 (0).0 (0). (). (0). (.). (.). (9).0 (0).0 (0) 0.9 () 9. () 9. (0).0 (). (). (.). (.) Size. (). (9).9 (9).9 (00). (). (0). (). () Mounting oles K 00/900 KF 00/900.9 ().90 (99). ().0 ().0 (). (0). (). (). (). (0).0 (). (.) Mounting oles. (.) Size. (). () Mounting oles with rackets KF 00. (9) with rackets Notes:. Knockouts are liquid tight until punched out with screwdriver. (See page ).. sides can be drilled, punched or milled. NPT hubs are available.. Yellow shaded area is useable space in enclosure.. Mounting screws are # UN (." Ø). If used indoors, punch or drill holes and cap recess with rubber plugs located inside cover.
For D, K and KF Series For D, K and KF Series MOUNTING PLTES EN 0 0 ( mm) (for box sizes to ) DIN RILS EN 0 0 ( mm) llows easy installation of components outside of enclosure. Kit includes " plate, " standoffs and mounting screws. OX ERVDE Meets all European and US standards. Used with snapon terminal blocks, relays etc. Kit includes rail and screws. K MP 0 K MP 0 K MP K MP x.0 x.0 (0 x ).0 x. ( x 9). x. (0 x ) 0.0 x. ( x ) LERNE. (). (). (9). () mm mm mm. mm OX TSD 0 TSD 0 TSK 0 TSK 0 TSK TSK 0 RIL (mm) RIL LENGT. (). (). (0).0 ().0 (). (90) For D, K and KF Series TERMINL LOKS ERVDE Meets all European and US standards. Plug or screw terminal blocks into holes inside enclosure. Provides clean power distribution. Maximum Voltage = 00V. OX & & DKL 0 KKL 0 KLS 0 KLS KLS KLS NO. OF POLES ND WIRE PER POLE (mm ) x.0, x., x. x.0, x.0, x. x 0.0, x.0, x.0 x.0, x.0, x 0.0 x 0.0, x 0.0, x.0, x.0, x.0 x 0.0, x.0, x.0, x.0 MX. POWER (mp.) 0 0 0 DKL 0 KKL 0 KLS 0 KLS KLS KLS U KITS METRI TO NPT ub Kits include NPT adapter and nut. Fits knockout in box. onverts hole which fits Metric thread to a female NPT threaded hub. T Materials: ody & Nut: ORing: Nickel Plated rass unan M0RN MRN MRN M0RN MRN MLE TRED M0 x. M x. M x. M x. M x. FEMLE TRED / NPT / NPT / NPT NPT / NPT WRENING FLTS W.9.... TRED LENGT T..... EIGT.9.9.0..
Mi LIQUID TIGT MODULR POLYRONTE ENLOSURES inges availble for all sizes! See page or Web site for our Strain Relief solution! Various sizes can be combined to make larger enclosures. The intermediate walls can be knocked out. Made of impact resistant polycarbonate, these enclosures meet NEM x (IP ) but have only a limited UV resistance. If used outdoors, protection against direct sunlight should be provided. ll enclosures are available with transparent or opaque covers. over screws can be replaced with a special hinged screw to convert any size into an enclosure with hinged cover. More information about the system and the many accessories, such as connection kits, grommets and strain relief fittings are available in the MSTER TLOG or check our web site: www.hitechcontrols.com Temperature Range: Material: Protection: SPEIFITIONS 0 F to F (0 to 0 ) Polycarbonate Limited UV resistance alogen and silicone free NEM x (IP) Notes:. Dimensions are in inches (mm).. Yellow shaded area is useable space in enclosure.. Knockouts are liquid tight until punched out.. Enclosure mounting holes for M or UN screws are located below the cover mounting screws. D TYP." () E F D TYP." () E F.9" x." (0 x 00)." x." (00 x 00)." x." (0 x 00)." x." (00 x 00)." x." (00 x 00)." (00).9" (0)." (00)." (0)." (00)." (00)." (00)." (00)." (00).9" () G x Mounting oles." ().9" () G x Mounting oles." ()
SI * OVER TRNSP. Mi 000 Mi 000 Mi 00 Mi 00 Mi 000 Mi 00 Mi 000 Mi 00 Mi 000 OVER OPQUE Mi 00 Mi 00 Mi 0 Mi 0 Mi 00 Mi 0 Mi 00 Mi 0 Mi 00 *Note: Mi 00 and Mi 0 feature a hinged cover. For Mi Series For Mi Series INES (MM) ENLOSURE INTERNL SPE MOUNTING OLES LENGT WIDT DEPT D LENGT E WIDT F DEPT G. (00).9 (0). (0). () 0. (). () 0. ().9 (). (00). (00). (0) 0. () 0. (). () 0. ().9 (). (00). (00). () 0. () 0. (). (9) 0. () 0. (). (00). (00). () 0. () 0. (). () 0. () 0. (). (00). (0). (0). () 0. (). () 0. (). (). (00). (0). (). () 0. (). (9) 0. (). (). (00). (00). (0). () 0. (). (0) 0. () 0. (). (00). (00). (). () 0. (). () 0. () 0. (). (00). (00). (0). (). (). () 0. () 0. () MOUNTING PLTES Made of /" ( mm) insulating material. screws included. omponents can be installed with selftapping screws. Mi MP Mi MP Mi MP Mi MP Mi MP SI,, to,, 0. x. (9 x ) 0. x 0. ( x ) 0. x. ( x ) 0. x. ( x ). x. ( x ) EXTENSION FRME Increases the depth of enclosures and by." ( mm). Mounting hardware included. Mi ZR Mi ZR SI. x. (00 x 00). x. (00 x 00) For Mi Series DIN RILS EN 0 0 ( mm) Mi TS 0 Mi TS Mi TS 0 SI to,. (). ().0 ()." ()." () For components with clipon or clamp attachment. Mounting screws are included..0" () KNOKOUTS X
KG 900 KG/KV LIQUID TIGT ENLOSURES The KG & KV Series have transparent covers with special saddle shaped sides allows easy observation and quick access to the installed components. Only, KG Series is hinged! The housing is made of polystyrene, the cover is made of impact resistant polycarbonate. These enclosures meet NEM x (IP ). Four different sizes are available along with DIN rails and mounting plates. inged 0.0" ()." ()." () 0 Walls 0 0.0 () 9. (). (0). ()..9 (.) (.). (). ().0 (0). (9).. () ().0 (.). () KG 900 0.0" ()." ()." () Walls 0 0 0.0 () 9. (). (0). ()..9 (.) (.). (). (). (). (0). (9).. () ().0 (.). () inged KG 900 0.0" ()." ()." () Walls 9 0 0 0.0 () 9. (). (0). ()..9 (.) (.). (). (). (). (0). (9).0 (). ().0 (.). () inged 9 KV 9 Included: Mounting Plate." (9)." () Walls. (.). (9) 9. ().. (). (0) (0). (0).9" ().9 (). (0).9 (0) 0. (.) Not inged SPEIFITIONS Temperature Range: 0 F to F (0 to 0 ) Material: ousing: Polystyrene over: Polycarbonate Protection: NEM x (IP) INTEGRTED ELSTI MEMRNES FOR LE FEEDTROUG. METRI KNOKOUTS Notes:. Dimensions are in inches (mm).. Yellow shaded area is useable space in enclosure.. Knockouts are liquid tight until punched out with screwdriver. (See page.). Mounting holes for M or # screws are inside the enclosure. Punch or drill holes and cap recess with rubber plugs (Encl.). Wall : x ø mm x ø mm x ø 0 mm x ø 0 0 mm Wall : x M0 x M x M/0 Wall : x M0 x M/ x M/0 Wall 9: x M0 x M/ x M/0 Wall 0: x PG Grommets ESM IP
For KG Series MOUNTING PLTES Made of /" ( mm) plastic material. Screws included. omponents can be installed with selftapping screws. W NO. ENLOSURE W X inches (mm) KG MP 0 for KG 900.9" x." (00 x ) KG MP 0 for KG 900." x." (0 x ) KG MP 0 for KG 900." x." (0 x ) For KG Series DIN RILS EN 0 0 ( mm) For components with clipon or clamp attachment. Mounting screws are included. L. NO. ENLOSURE LENGT L inches (mm) KG TS 0 for KG 900." () KG TS 0 for KG 900." (0) KG TS 0 for KG 900." () *Note: Locking nut is included. LIQUID TIGT NYLON STRIN RELIEF FITTINGS Meet NEM x (IP ) & NEM (IP ) * LK D0MKN D0MRKN DMKN DMRKN DMKN DMRKN DMKN DMRKN D0MKN D0MRKN D0MKN D0MRKN GRY D0MGYN D0MRGYN DMGYN DMRGYN DMGYN DMRGYN DMGYN DMRGYN D0MGYN D0MRGYN D0MGYN D0MRGYN TRED M0 M0 M M M0 M0 LE RNGE INES (MM).. (.0.0).0. (.0 9.0).9. (0.0.0).. (.0.0).. (.0.0).. (9.0.0)..9 (.0.0)..9 (.0 0.0).. (.0.0).9.0 (0.0.0)..0 (.0.0).9. (.0.0).0 (.0).0 (.0). (.0). (9.0).9 (.0).9 (9.0) GROMMETS NEM X & (IP ) Material: Thermoplastic Elastomer INES (MM). (9.0). (9.0). (.0). (.0). (.0). (.0) For other Strain Relief Products call Sealcon at 00..90 or 0.99.. Visit Sealcon s Web site www.sealconusa.com or EMail info@sealconusa.com.9 (.0).0 (.0).0 (.0). (.0).09 (.0). (0.0) ut out scored center. Push cable through grommet. Features a double seal. Does not provide strain relief for the cable. an be used to plug a hole. PNEL OLE PNEL WLL LE RNGE INES (MM) SI DRILLED TIKNESS INES (MM) D EDK 0 EDK EDK EDK 0 STEPPED GLNDS NEM (IP ) Material: Thermoplastic Elastomer ut off appropriate step to fit cable. Push cable through gland. Does not provide strain relief for the cable. an be used to plug a hole. PNEL OLE PNEL WLL LE RNGE INES (MM) SI DRILLED TIKNESS INES (MM) D STM 0 STM STM STM 0 M0 M M M0 M0 M M M0. (0.).00 (.). (.).9 (0.). (0.).00 (.). (.).9 (0.).0. (..).0. (..).0. (..).0. (..).0. (..0).0. (..0).0. (..0).0. (..0).. (.0.0).. (9.0.0)..9 (.0.0).. (.0 0.0).0. (.0.0).0. (.0.0)..0 (.0.).. (.0.0). (.).9 (.).0 (0.). (.). (.0). (.).09 (.). (.).0 (.0). (.0).0 (.0). (.0).9 (.0). (0.0). (.0). (.0). (.). (.). (9.). (9.). (9.). (.). (.).9 (.) D. (.). (.). (.). (.) D. (.0).9 (.). (.). (.)