Illustrations Dimensional drawing Page 1/7 See enlarged drawings at the end of document Product specification surface-mount termination unit with C6modul 180 certified to GHMT Cat.6 re-embedded PVP component testing for Cat.6 to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09, TIA/EIA-568-C.2 (2009-08) and IEC 60603-7-51 Ed.1 (12/2008), certified to GHMT compliance with class E up to 500 MHz to ISO/IEC 11801 Ed.2.2:2011-06, DIN EN 50173-1:2011-09 tested: component up to 600 MHz, link up to 800 MHz suitable for 10 GBit Ethernet (IEEE 802.3an), Remote Powering (PoE, PoE plus and UPoE) and HDBaseT connection of data lines AWG 26/1 to 22/1 (solid wire) and AWG 26/7 to 22/7 (stranded wire) to insulation displacement connectors (IDC) module plug direction 45 downwards strain relief snapped on to stuffer cap with label window for enclosed identification labels label sheet 209 x 294 mm see accessory integrated dust protection covers (also colored) cover parts in pure white RAL 9010, structured surface with matt finish variants: 1 port, 2 ports, 3 ports
Page 2/7 General Data Fields of application Design Mounting style Shielding Transmission technology Wiring Color Dimensions Dimension (L x W x H) Dimension (L x W x H) Modularity Labeling option Marking option Office Wall outlet surface mount shielded Copper T568A, T568B pure white 51.00 x 85.60 x 85.60 mm 2.01 x 3.37 x 3.37 in. label window with identification label by dust protection Transmission characteristics Category (ISO) Class (ISO/IEC) Category (TIA) Remote Powering PoE PoE plus UPoE HDBaseT Transmission rate up to 10 GBit 6 A E A 6A IEEE 802.3af IEEE 802.3at IEEE 802.3an Connections/interfaces Connector technology interface 1 Connector technology interface 2 Number of ports interface 2 1 Number of ports interface 2 equipped 1 Number of positions/contacts interface 1 8 Number of positions/contacts interface 2 Number of ports with dust protection interface 2 1 IDC-connection RJ45-jack 8P/8C
Page 3/7 Connections/interfaces Termination data, solid wire (min. - max.) Conductor cross section, solid wire AWG 26/1-22/1 Conductor cross section, solid wire Conductor diameter, solid wire (bare copper) Conductor diameter, solid wire (bare copper) 0.128-0.324 mm² 0.409-0.643 mm 0.016-0.025 in. Termination data, stranded wire (min. - max.) Conductor cross section, stranded wire AWG 26/7-22/7 Conductor cross section, stranded wire Conductor diameter, stranded wire (bare copper) Conductor diameter, stranded wire (bare copper) Module plug-in direction Cable access/outlet 180 0.141-0.355 mm² 0.483-0.762 mm 0.019-0.03 in. 45 downwards Electrical characteristics Current carrying capacity Rated voltage Contact resistance Through resistance Insulation resistance Dielectric strength conductor-conductor (secondary) max. 1 A max. 50 V max. 20 mohm max. 200 mohm min. 500 MOhm max. 1000 V DC Mechanical characteristics Cut-out Insertion and withdrawal force Position/mounting of latch - standard installation position Strain relief Modul max. 30 N top latching clip Materials and material properties Material - Housing Material - Surface mount frame Material - Cover part(s) Material - Supporting frame Material - Module support Material - Label window ABS, impact resistant ABS ABS, transparent
Page 4/7 Materials and material properties Material - Dust protection Material - Contact Material - Contact finish Material - Shield Material - Stuffer cap Material - Strain relief ABS Spring steel Au (gold) PA 6.6 UL94 V0 PA 6.6 UL94 V0 Environmental conditions Temperature (min. - max.) Temperature - Storage C -40-70 C Temperature - Storage F -40-158 F Temperature - Operating C -40-70 C Temperature - Operating F -40-158 F Particulate ingress Liquid ingress/immersion Rapid change of temperature Electromagnetic measurement E 2 IP2X IPX0-40 C / -40 F - +70 C / 158 F / 25 cycles t=30 min Certifications GHMT Component GHMT PVP CE RoHS UL listed (file no.) compliant compliant E178484 The product meets the following standards Generic cabling systems General requirements ISO/IEC 11801 Ed.2.2: 2011-06 DIN EN 50173-1: 2011-09 TIA/EIA 568-C Office buildings ISO/IEC 11801 Ed.2.2: 2011-06 DIN EN 50173-2: 2011-09 TIA/EIA 568-C Living units ISO/IEC 15018 DIN EN 50173-4: 2011-09 TIA/EIA 570-B
Page 5/7 The product meets the following standards Connectors for electronic equipment Free and fixed connectors DIN EN 60603-7-51:2011-01 Connectors for electronic equipment - Tests and measurements Test schedule for connectors DIN-EN 60512-99-001: 02-2013, Pg. UEL1 Endurance tests IEC 60512-9-3: 03-2009 Degrees of Protection Provided by Enclosures IEC 60529 Interference proof Immunity for industrial environments DIN EN 61000-6-2:2006-03 Climate tests IEC 60512-11 Classifications ETIM 5.0 EC001264 Packing details Type of packaging Packaging unit - Weight (gram) Packaging unit - Weight (pound) Packaging dimension (W x H x D) Packaging dimension (W x H x D) 10 pc(s) / box 1570.00 g 3.46 lb 340.00 x 266.00 x 126.00 mm 13.39 x 10.47 x 4.96 in.
Accessories Page 6/7 Designation 899650-01 Label sheet for wall outlets 820394-0105-I Dust protection covers for wall outlets yellow 820394-0106-I Dust protection covers for wall outlets blue 820394-0107-I Dust protection covers for wall outlets green 820394-0108-I Dust protection covers for wall outlets red
Powered by TCPDF (www.tcpdf.org) Data sheet Illustrations Dimensional drawing Page 7/7