User Manual Add, Edit and Remove
Add The HALO Home Movable Switch enables you to add a switch, anywhere. 1. To use an HALO Home Movable switch, you first need to have an HALO Home User Account, and set up an HALO Home compatible device, like the RL4 or RL56 downlights. 2. Remove from the box and remove the back plate by pressing your thumbs forward on the front of the switch, near the top. The back panel should slide down opposite the switch. Lift the back panel off. 3. Install the three CR2032 batteries provided in the box. They should be installed fat side up (+). 4. Important: The red indicator light should come on for about 1 second and go off. If the light stays on permanently, it is necessary to remove the batteries and reinstall them again. The switch will not function if the light is on permanently. 5. Go to the HALO Home app and navigate to the controller screen. 2 www.eaton.com/halohome
6. Press the + button on the upper right. 7. Click the button at the bottom of the screen to add the. 8. At this point you should see the switch appear on the screen. If the switch does not appear in the screen before the flashing light goes off, then press the button on the switch again and repeat the process. 9. Select the Anyplace Switch from the list. 10. When the Anyplace Switch is selected, press the button at the bottom of the screen again. 11. Use the controls at the bottom of the screen to associate Devices and Groups to your Anyplace Switch. www.eaton.com/halohome 3
12. Once you have your configured to your liking, press the Save button. 13. Press the button on the one more time. 14. Wait until the process is complete. 15. Your is now paired to your account. Press the Back button to return to the list of Controllers. 16. You may now control your lighting using the. At this point the switch will be added and you will be ready to associate it to a device. 4 www.eaton.com/halohome
Remove Anyplace switch 1. To remove your from your account, navigate to the Controllers screen and select the. 2. Press the vertical button icon on the top right of the screen. 3. Press the Remove menu item. 4. Follow the instructions on the screen. 5. Press the button on the. 6. Your is removed from your account. www.eaton.com/halohome 5
Customizing the 1. If you want to associate to a single device, select the Devices tab at the bottom. Swipe the device photos left or right until you find the device you want. 2. To associate to a group of devices, Create a group if you have not done so already. Then press the Groups. You must create the group before you associate with the switch. Next swipe the group photos left or right until you find the group you want. 3. If you like, you can give the switch a name and a photo by touching the switch name or photo. 4. You can also Take Picture of the for your account. Press Save in the upper right corner of the app screen. 5. If you are happy with your picture, press the Use Photo button on the bottom right. 6. Now, select the Devices and Groups you wish to control via your Anyplace Switch. 6 www.eaton.com/halohome
7. When you are done associated devices with your switch, press the Save button at the top right of the screen. 8. Follow the instructions on the screen. 9. Press the button on the Anyplace Switch. 10. You will know that the switch has properly saved when the app closes the association screen and returns to the controller dashboard, and you will also see the device or group name on the switch dashboard. Important: If you do not press the button on the switch and see the app close the association screen, the changes will not be saved to the switch and it will not work as expected. Eaton 1121 Highway 74 South Peachtree City, GA 30269 P: 770-486-4800 www.eaton.com/connectedlighting For service or technical assistance: 1-800-553-3879 Canada Sales 5925 McLaughlin Road Mississauga, Ontario L5R 1B8 P: 905-501-3000 F: 905-501-3172 2018 Eaton All Rights Reserved Printed in USA Publication No. MN503013EN March 12, 2018 5:22 PM Eaton is a registered trademark. All other trademarks are property of their respective owners. Product availability, specifications, and compliances are subject to change without notice.