UL (9-1) reinforced insulation compliant Load current 1 to 2A Small Tab Terminal SSR AQ-J RELAYS Slim heat sink combined type RoHS compliant ORDERING INFORMATION Output type 1: 1A, 7V to 24V AC 2: A, 7V to 24V AC 4: 2A, 7V to 24V AC AQJ Terminal, Type 1: Tab terminal, Zero-cross 2: Tab terminal, Random* Input voltage 2: 4 to V DC : 18 to 28 V DC 9: 1 to 18 V DC Functions V: Built-in varistor Slim heat sink combined type None: Y: W: Without a heat sink 1a type 1a 2 type Note: * Random type is available by custom order. FEATURES 1. Compact Size W 28 L 38 H 3 mm W 1.12 L 1.49 H inch 2. Built-in varistor 3. Reverse input connection prevention function 4. Labor Saving (tab terminal). Heat sink combined types ready to mount on DIN rail added (Radiating grease and screws assembly process not needed). Output arrangement 1a and 1a 2 available in the heat sink combined type Note: * International standards are acquired for AQ-J SSR stand-alone, not applied to heat sink combined type. TYPICAL APPLICATIONS 1. Kitchen appliances 2. Vending machine 3. Injection molding machine 4. Packing machine. Amusement machine TYPES 1. AQ-J Solid State Relays Type Load current Load voltage Input voltage Zero-cross* 1A A 2A Standard Packing; carton: 1 pcs., case: 2 pcs. Note: Random type also available. Please inquire. 7V to 24V AC 4 to V DC AQJ112V 1 to 18V DC AQJ119V 18 to 28V DC AQJ11V 4 to V DC AQJ212V 1 to 18V DC AQJ219V 18 to 28V DC AQJ21V 4 to V DC AQJ412V 1 to 18V DC AQJ419V 18 to 28V DC AQJ41V 1 ASCTB21E 21-T
2. AQ-J Slim Heat Sink Combined Type Output configuration Type Load current Load voltage Input voltage 1a 1a 2 Zero-cross* Standard Packing; no carton, case: 1 pcs. Note: * Random type also available. Please inquire. 1A 2A 1A (per 1a) A (per 1a) 7V to 24V AC 4 to V DC AQJ112VY 1 to 18V DC AQJ119VY 18 to 28V DC AQJ11VY 4 to V DC AQJ412VY 1 to 18V DC AQJ419VY 18 to 28V DC AQJ41VY 4 to V DC AQJ112VW 1 to 18V DC AQJ119VW 18 to 28V DC AQJ11VW 4 to V DC AQJ412VW 1 to 18V DC AQJ419VW 18 to 28V DC AQJ41VW 3. Accessories Type Packaged quantity Slim heat sink (28mm wide) (Mountable on a DIN rail) AQP-HS-SJ1A No carton, 1 in a case Slim heat sink (4mm wide) (Mountable on a DIN rail) AQP-HS-SJ2A No carton, 8 in a case Standard heat sink (1A and A) AQP-HS-J1A in a carton, 2 in a case Standard heat sink (2A only) AQP-HS-J2A No carton, in a case DIN rail mounting plate AQP-DPJ No carton, in a case Mounting rail AT8-DLA1 1 in a carton, 1 in a case Fastening plate AT8-DLE 1 in a carton, 2 in a case RATING 1. Ratings (Test sample: AQ-J stand-alone, Measurement condition: at 2 C 8 F, input ripple: 1% or less) 1) Input side AQJ112V AQJ119V AQJ11V AQJ212V AQJ219V AQJ21V Item AQJ412V AQJ419V AQJ41V Rated voltage V DC 12V DC 24V DC Input voltage 4 to V DC 1 to 18V DC 18 to 28V DC Input impedance Approx..2kΩ Approx..8kΩ Approx. 1.kΩ Drop-out voltage Min. 1V DC Note: Refer to REFERENCE DATA 3. Input current vs. input voltage characteristics. 2) Output side Item AQJ112V AQJ119V AQJ11V AQJ212V AQJ219V AQJ21V AQJ412V AQJ419V AQJ41V Max. load current* 1 1A A 2A Load voltage 7 to 24V AC Frequency 4Hz to Hz Non-repetitive surge current 1A A 2A OFF-state leakage current Max. ma ON-state voltage drop Max. 1.V Min. load current* 2 ma Notes: *1. Refer to REFERENCE DATA 1. Load current vs. ambient temperature. *2. When the load current is less than the rated minimum load current, please refer to Cautions for Use. 2. Ratings (Test sample: AQ-J slim heat sink combined type, Measurement condition: at 2 C 8 F, input ripple: 1 % or less) 1) Input side AQJ112V(Y W) AQJ119V(Y W) AQJ11V(Y W) Item AQJ412V(Y W) AQJ419V(Y W) AQJ41V(Y W) Rated voltage V DC 12V DC 24V DC Input voltage 4 to V DC 1 to 18V DC 18 to 28V DC Input impedance Approx..2kΩ Approx..8kΩ Approx. 1.kΩ Drop-out voltage Min. 1V DC Note: Refer to REFERENCE DATA 3. Input current vs. input voltage characteristics. 2 ASCTB21E 21-T
2) Output side AQJ112VY AQJ119VY AQJ412VY AQJ419VY AQJ112VW AQJ119VW AQJ412VW AQJ419VW Item AQJ11VY AQJ41VY AQJ11VW AQJ41VW Output arrangement 1a 1a 2 Max. load current* 1 1A 2A 1A A Load voltage 7 to 24V AC Frequency 4Hz to Hz Non-repetitive surge current* 2 1A 2A 1A 2A OFF-state leakage current Max. ma ON-state voltage drop Max. 1.V Min. load current* 3 ma Notes: *1. Refer to REFERENCE DATA 3. Input current vs. input voltage characteristics. *2. Refer to REFERENCE DATA 1. Load current vs. ambient temperature. *3. When the load current is less than the rated minimum load current, please refer to Cautions for Use. AQ-J 3. Characteristics (Measurement condition: at 2 C 8 F, input ripple: 1% or less) Item Characteristics Remarks Operate time Max. 1/2 cycle of voltage sine wave + 1ms Release time Max. 1/2 cycle of voltage sine wave + 1ms Insulation resistance Min. 1MΩ between input, output and case at V DC Breakdown voltage Vibration resistance 3, Vrms between input and output 2, Vrms between input, output and case SSR stand-alone: 1 to Hz, double amplitude of 1.mm Slim heat sink combined type: 1 to Hz, double amplitude of.7mm for 1min. X, Y, Z axes Shock resistance SSR stand-alone: Min. 98m/s 2 Slim heat sink combined type: Min. 197m/s 2 X, Y, Z axes Ambient temperature 3 to +8 C 22 to +17 F Non-condensing at low temperatures Storage temperature 3 to +1 C 22 to +212 F Non-condensing at low temperatures Operational method Zero-cross (Turn ON and Turn OFF) REFERENCE DATA (1) AQ-J Solid State Relays 1. Load current vs. ambient temperature Use load current within range specified in the figure below Tested condition: (1) 1 A type (when using heat sink or iron (2)-1. A type (when using ) 1) If attached to a heat sink, use a heat plate) conductive compound (Ex. Momentive 12 18 Performance Materials Inc. YG111 or on an (A) slim heat sink TSK33) of similar coating to improve cooling on an (B) slim heat sink When using 2 2 t2 mm 1 2) Without external heat sink When two units are mounted on an (A) slim heat sink If the mounting surface is not metallic and a 8 12 heat sink is not used, expose the bottom on an (C) standard heat sink When two units are mounted When using surface and plate surface to improve heat on an (B) slim heat sink 9 1 1 t1. mm When using 1 1 t1. mm dissipation. 3) The current value is per 1a. 4 (A) slim heat sink (B) slim heat sink (C) standard heat sink (D) DIN rail mounting plate (E) standard heat sink AQP-HS-SJ2A AQP-HS-SJ1A AQP-HS-J1A AQP-DPJ AQP-HS-J2A 2 When using as stand-alone When using an (D) DIN rail mounting plate 2 4 8 1 3 When using t1. mm -2 2 4 8 (2)-2. A type (when using a heat sink) (3)-1. 2 A type (when using ) (3)-2. 2 A type (when using a heat sink) 2 1 on an (C) standard heat sink on an (B) slim heat sink When two units are mounted on an (A) slim heat sink When two units are mounted on an (B) slim heat sink When using as stand-alone When using an (D) DIN rail mounting plate When a single unit is mounted on an (A) slim heat sink 2 4 8 1 3 When using 3 3 t2 mm 2 When using 2 2 t2 mm When using 2 2 2 t2 mm 1 When using t1. mm When using 1 1 t1. mm -2 2 4 8 3 2 2 1 When a single unit is mounted on an (E) standard heat sink When a single unit is mounted on an (B) slim heat sink When two units are mounted on an (A) slim heat sink on an (C) standard heat sink When a single unit is mounted on an (A) slim heat sink When two units are mounted on an (B) slim heat sink When using as stand-alone When using an (D) DIN rail mounting plate 2 4 8 1 3 ASCTB21E 21-T
2. Non-repetitive surge current vs. carrying time 3. Input current vs. input voltage characteristics (1A, A and 2A common) 3 3 Non-repetitive surge current, A 2 1 2A type A type 1A type Input current, ma 2 2 1 (4 to V DC) (1 to 18V DC) (18 to 28V DC) 1 1 1 No. of cycles at Hz 1 2 2 3 3 Input voltage, V (2) AQ-J Slim Heat Sink Combined Type 1. Load current vs. ambient Use load current within range specified in the figure below temperature characteristics (1) Output arrangement: 1a (2) Output arrangement: 1a 2 2 2 (Per 1a) 2 1 AQJ41 VY AQJ11 VY 1 AQJ41 VW AQJ11 VW 2 4 8 1 2 4 8 1 Note: When two contacts are operated simultaneously. In the case of a single-contact operation, the rating of (1) AQJ11 VY, AQJ41 VY applies. 2. Surge current vs. carrying time characteristics 3. Input current vs. input voltage characteristics Surge current, A 4 3 2 Input current, ma 3 24 18 12 AQJ 12V AQJ 19V AQJ 1V AQJ41 V 1 AQJ11 V 1 1 1 No. of cycles at Hz 1 2 2 3 Input voltage, V 4 ASCTB21E 21-T
DIMENSIONS (mm inch) The CAD data of the products with a mark can be downloaded from: http://industrial.panasonic.com/ac/e/ 1. AQ-J Stand Alone 4.3.19 3 max. 7.9 max..313 4..179 Schematic Input power 3 1 + 4 2 Load Load power source 38 1.49 4.3 dia..19 dia. 28 1.12 8.4.3.331.2 2-1. dia. 2-. dia. 3 2-1.2 dia. 2-.47 dia.. 2.8.217.11 1..3 7.1.28 Mounting dimensions 3 +.2.1 +.8.4 2-4.3 dia. or M4 2-.19 dia. or M4 Output side 1 and 2 terminals: #2 type, t =.8.31 Input side 3 and 4 terminals: #11 type, t =..2 17.9.197 2.-(1) AQ-J Slim Heat Sink Combined Type Output Arrangement: 1a 4. dia. 1 3.937 9 3.43 78 3.71 4.. elliptical hole.181.22.23 28 1.12 Schematic Input power source 3 1 + 4 2 Load Load power source Mounting dimensions (Top view) Note: When using on a DIN rail, please install so that the A part is on top. 1..3 AQP81 A part 777 Max. 83 113 3.28 4.449 1 3.937 2-4. dia. or M4 2- or M4 9±.2 3.43±.8.23 2.-(2) AQ-J Slim Heat Sink Combined Type Output Arrangement: 1a 2 4. dia. 1 3.937 9 3.43 78 3.71 4.. elliptical hole.181.22.23 28 1.12 Schematic Input power source 3 1 + 4 2 Load Load power source Note: Use caution for AQ-J terminal numbers. Mounting dimensions (Top view) Note: When using on a DIN rail, please install so that the A part is on top. 1..3 AQP81 777 A part Max. 83 113 3.28 4.449 1 3.937 2-4. dia. or M4 2- or M4 9±.2 3.43±.8.23 ASCTB21E 21-T
ACCESSORIES (mm inch) AQP-HS-SJ1A Slim Heat Sink 4. dia. 3 1 3.394 1 3.937 9 3.43 78 3.71 3 -M4 (Effective screw depth: mm.23inch).23 4.. elliptical hole.181.22 28 1.12 Mounting dimensions (Top view) 2-4. dia. or M4 2- or M4 9±.2 3.43±.8.23 1..3 AQP81 777 78 3.71 83 3.28 Note: When using on a DIN rail, please install so that the A part is on top. A part AQP-HS-SJ2A Slim Heat Sink 1 3.937 9 3.43 78 3.71 4 1.7 -M4 (Effective screw depth: mm.23inch) Mounting dimensions (Top view) 2-4. dia. or M4 2- or M4.23 4. dia. 47. 1.874 3 3.23 4.. elliptical hole.181.22 4 1.772 9±.2 3.43±.8 Note: When using on a DIN rail, please install so that the A part is on top. 1..3 AQP812 777 A part 78 3.71 83 3.28 AQP-HS-J1A Standard Heat Sink (for 1A and A types) Mounting dimensions 4.4.173 1.99 4.4.173 R2.2 R.87 2.79 4-M4 or 4.4 dia. 4-M4 or.173 dia. 3-M4 1..9 9 3.43 4 2.12 33.3 1.311 8 3. 1+. 1. +.2 3.937.9 9±.1 3.43±.4 11.1.437 3 47. 1.874 1 3.937 2.79 9.34 24..9 28. 1.122 4 1.772 1..9 ±.2 1.99±.8 ASCTB21E 21-T
AQP-HS-J2A Standard Heat Sink (for 2A type) 4-R2..98 Mounting dimensions 4-M4. or dia. 4-M4. or.197 dia. 3-M4.197 3 119 4.8 47. 1.87.9 119±.1 4.8±.4 132.197 132±.1.197±.4 7.27 2.79 2 2.47 4 1.811 4 2.2 82 3.228 1 3.937 12 4.724 142.91 3.118 13.12 AQP-DPJ DIN Rail Mounting Plate 1..3 4. dia. 3-M4 47. 1.874 9 3 3.43 19.748 1 3.937 12.1.47 1.. 4.. elliptical hole.181.22.23.91 AT8-DLA1 Mounting rail AT8-DLE Fastening plate..217.197 1, 39.37 3 1.378 24 1 2.7R 1.94 1..91.394.91.18R.91.394.91.197.9 27 1.3 12.472 M4 1.99 1.394 4-. slot 4-.217.91 slot 7..29 ATA48 UP 1.394 7 ASCTB21E 21-T
NOTES 1. Part number indication The AQ-J slim heat sink combined type is a product combining the AQ-J SSR and AQ-J SSR heat sinks. The part numbers are indicated on each AQ-J SSR and heat sink. Ex) In the case of AQJ112VY Part number of AQ-J SSR: AQJ112V Part number of the heat sink: AQP81* When using these parts, please refer to REFERENCE DATA, 1. Load current vs. ambient temperature. Note: * The Japanese part number is printed on the following accessories in stead of Global part number. Please refer to the below chart for interpretation from Japanese to Global part number. Products Japanese Global Compatible models Slim heat sink (28 mm) AQP81 AQP-HS-SJ1A AQ-J Slim heat sink (4 mm) AQP812 AQP-HS-SJ2A AQ-A, AQ-J Standard heat sink (1A and A) AQP811 AQP-HS-J1A AQ-A, AQ-J Standard heat sink (2A and 4A) AQP88 AQP-HS-J2A AQ-A, AQ-J Standard heat sink (AQ-A 2A) AQP84 AQP-HS-3/4A AQ-A DIN Rail Mounting Plate (for AQ-A and AQ-J) AQP89 AQP-DPJ AQ-A, AQ-J Mounting Rail ATA4811 AT8-DLA1 AQ-A, AQ-J Terminal Cover (for AQ-A) AQA81 AQA81 AQ-A Recommended Temperature Controllers 48mm 1.89inch 48mm 1.89inch mm 2.2inch <KT4H Temperature Controller> Our temperature controller is recommended for use with our Solid State Relays. Features Space saving requiring only a depth of mm Data collection possible through a PLC using RS48 communication Tool port is standard for easy data setting Inverted LCD + backlight for good legibility with large characters Excellent operability and rich optional control functions Substitute part numbers Power supply Control output 1 to 24 V AC Non-contact voltage output AKT4H1121 * For detailed product information about temperature controllers, please refer to our website: http://industrial.panasonic.com/ac/e/ 8 ASCTB21E 21-T