COATERS REFERRAL GUIDE AMERICAN CONVERTERS INC. PH: 763-574-1044 Contact: Mike Urquhart FAX: 763-574-1015 Email: Murquhart@amconfoam.com 5360 NE MAIN ST. Fridley, MN 55421 www.amconfoam.com Capabilities: Spray Coating and full foam fabrication facility. AMERICAN EXCELSIOR PH: 920-458- 4333 Contact: Bob DeBruine FAX: 920-458-5366 Email: RDebruine@AmericanExcelsior.com 3127 SOUTH 31 ST STREET SHEBOYGAN, WI 53081 www.americanexcelsior.com Capabilities: Spray and dip coating of foam products, full foam fabrication and assembly facility as well as molding of flexible polyurethane foam. APPLIED POWER PRODUCTS PH: 952-985-5806 Contact: Mark Lindenberg FAX: 952-985-5151 Email: mlindenberg@appliedpowerproducts.com 21005 HERON WAY LAKEVILLE, MN 55044 www.appliedpowerproducts.com Capabilities: Full foam fabrication and spray coating. BARRIER CORPORATION PH: 503-639-4192 Contact: Eric Newman FAX: 503-684-1515 Email: Eric@barriercorp.com 9806 TIGARD ST. SE TIGARD, OR 97223 www.barriercorp.com CONTOUR FABRICATORS PH: 810-593-3239 Contact: John Good FAX: 810-750-5310 Email: John.Good@CFIMedical.com 14241 FENTON ROAD FENTON, MI 48430 www.cfimedical.com
CREATIVE FOAM MEDICAL SYSTEMS PH: 574-546-4238 ext 2537 Contact: Ryan McCartney FAX: 574-546-5093 Email: rgmccartney@creativefoammedicalsystems.com 405 N. INDUSTRIAL DR. Bremen, IN 46506 www.creativefoammedicalsystems.com Capabilities: Spray and dip coating of various foams, full fabrication facility. ISO 9001: 2000 Certified & ISO 13485 Certified F & M Plastics, Inc. PH: 715-294-4790 Contact: Shawn Libersky FAX: 715-294-4794 Email: Shawn@fmplasticsinc.com 503 Simmon Dr. Osceola, WI 54020 www.fmplasticsinc.com Capabilities: Spray and dip coating of various products. FALLS INDUSTRIAL FOAM PH: 320-632-3999 Contact: Wayne Chabot FAX: 320-632-1515 Email: wchabot@fallsco.com or orders@fallsco.com 16731 Haven Road Little Falls, MN 56345 www.fallsco.com Capabilities: Spray & dip coating and full foam fabrication facility FOAM RUBBER, LLC PH: 765-521-2000 Contact: Mark Grogan FAX: 765-521-2759 Email: mgrogan@frp-usa.com 2000 TRO AVE. NEW CASTLE, IN 47362 www.frp-usa.com Capabilities: Spray coating various foam products. Full foam fabrication and assembly facility FEDERAL FOAM TECHNOLOGIES PH: 800-898-9559 Contact: Todd Kidder FAX: 715-246-9599 Email: Todd.Kidder@federalfoam.com 600 WISCONSIN DRIVE NEW RICHMOND, WI 54017 www.federalfoam.com Capabilities: Spray coating various foam products. Full foam fabrication and assembly facility
MANTEC SERVICES, INC. PH: 206-285-5656 Contact: Dwaine Havens FAX: 206-285-4750 Email: info@mantecservicesinc.com 4400 24 th AVE. W. SEATTLE, WA 98199 www.mantecservicesinc.com Capabilities: Spray Coatings, custom molding of polyurethane foam, and foam fabrication. ISO 9001:2008 Certified. Woman owned small business MASSEE PRODUCTS PH: 269-684-8255 Contact: Jesse Townsend FAX: 269-684-4423 Email: massee@sbcglobal.net 2612 NORTH 5 TH STREET NILES, MI 49120 www.masseeproducts.com Capabilities: Dip coating of foam products, full foam fabrication & assembly facility. MCS (MEDICAL COMFORT SPECIALISTS, LLC) PH: 517-715- 6340 Contact: Randy McPhee FAX: 517-969-5185 Email: RCMcPhee@medicalcomfort.com 919 GARDEN LANE ST. FOWLERVILLE, MI 48836 www.medicalcomfort.com MIDWEST RUBBER CO. PH: 810-376-2085 Contact: Bill Wheat FAX: 810-376-8283 Email: bwheat@mwrco.com 3525 RANGE LINE RD. DECKERVILLE, MI 48427 www.mwrco.com Capabilities: Spray coating of various products MILCUT, INC. PH: 262-783-3300 Contact: Curt Huettner FAX: 262-783-7678 Email: CHuettner@milcut.com P.O. BOX 229 BUTLER, WI 53007 Capabilities: Full service foam, rubber and plastic fabricator. ISO 9001:2008 Certified
OTTO BOCK POLYURETHANE TECHNOLOGIES, Inc. PH: 248-243-3112 Contact: Steve Foote Email: Steve.Foote@ottobock.com 2923 TECHNOLOGY DR. www.ottobockpolyurethanes.com ROCHESTER HILLS, MI 48309 Capabilities: In Mold Coating Production of molded PUR parts for unique applications. Both Flexible and Integral Skin. Specialists in blending and shipping of PUR chemical systems. PURforms, Inc. PH: 616-897-3000 Contact: Rick Raimer FAX: 616-897-8700 Email: rraimer@purforms.com 615 CHATHAM ST. LOWELL, MI 49331 http://purforms.com/ Capabilities: Molded polyurethane products from integral skin, flexible, viscoelastic and rigid foams, cast elastomers, and gels. Low to high volume production. Assisted product design and development. QUALITY FOAM PH: 951-245-4429 ext 131 Contact: Jim Barrett FAX: 951-245-8668 Email: Jbarrett@qualityfoam.com 31855 CORYDON RD. LAKE ELSINORE, CA 92530 www.qualityfoam.com ROGERS FOAM PH: 617-623-3010 Contacts: Caroline Marotta FAX: 617-629-2585 cmarotta@rogersfoam.com Brian Condon bcondon@rogersfoam.com 20 VERNON STREET SOMERVILLE, MA 02145 www.rogersfoamcorp.com Capabilities: 11 Locations worldwide: Spray and dip coating of foam products, full foam fabrication and assembly facility as well as molding of flexible polyurethane foam.
RUSSELL PRODUCTS PH: 330-535-9246 Contact: Tom Mitchell FAX: 330-535-9519 Email: tmitchell@russprodco.com 275 N FORGE AKRON, OH 44304 www.russprodco.com Capabilities: Spray and dip coating of various items including foam and metal products. Not a foam fabricator. SOUTHWEST FOAM FABRICATORS PH: 817-267-4444 Contact: Philip Blakeman FAX: 817-354-4218 Email: philip@swairproducts.com 13108 EULESS ST. EULESS, TX 76040 www.swairproducts.com TUMBLE FORMS PH: 315-429-3101 Contact: Mario Osiecki FAX: 315-429-9739 Email: Mario.Osiecki@pattersonmedical.com 1013 BARKER ROAD DOLGEVILLE, NY 13329 Capabilities: Spray molded Polyurethane foam products, molding of polyurethane foam shapes, wood fabrications, plastics. U-SPRAY PH: 262-781-8884 CONTACT: Dean Klingbeil FAX: 262-781-8815 Email: dean@u-spray.com 4907 N 124 TH STREET BUTLER, WI 53007 www.u-spray.com Capabilities: Spray coating of fabricated foam products.