PRICES AND PARTS SUBJECT TO CHANGE. PRICING In U.S. Currency. Loc-N-Load spring-action clamps and interlocking fixture plates CMM and Vision Inspections Featuring: Cross-Bow Silver-Bullet D-Block Simple-Stop Loc-N-Load Trigger-Finger Rapid-Loc An order placed today will improve productivity and profits immediately! Made in the USA Patents Pending 508-869-0373 www.fixture-up.com Products of Phillips Precision, Inc. Products Division, Boylston, MA 01505
Loc-N-Load CMM Fixture Plates The two main components of the Loc-N-Load Fixture Plate System adapt easily to your equipment. Install docking rail with bolts or completely out of the way using double-sided tape. Interlocking fixture plates quickly secure and release with the use of magnets creating highly repeatable setups. Create multiple fast-swap setups per CMM! Ready-made interlocking plates make low-cost fixtures & ship same day. Inspect more parts per shift, even with less-skilled inspectors. Easily access your granite. Use as dedicated tooling add to job box. We were looking for a quick change fixture system for our CMM s and believe that your solution is just that! We are always focused on lean activities and as we expand our use of CMM s on our shop floor this solution will be instrumental in our having a self serve inspection process. Harvey Smith, VP Operations, Kennebec Technologies Get started with a docking rail, a plate and some work holding and add as work requires. Creating a LEAN QC department need not be expensive! Loc-N-Load Docking Rails Choose 360, 540 or 720 mm CMM Docking Rails and Fixture Plates (M6) Part # Description MSLP Loc N Load Rails & Fixture Plates LNL DOCK M360 Docking Rail 360mm $ 340 LNL DOCK M540 Docking Rail 54mm $ 380 LNL DOCK M720 Docking Rail 720mm $ 490 LNL M180180 LNL Plate 180 x 180mm $ 290 LNL M180360 LNL Plate 180 x 360mm $ 480 LNL M360360 LNL Plate 360 x 360mm $ 790 LNL M360540 LNL Plate 360 x 540mm $1140 Accessory Plates Loc-N-Load Fixture Plates 4 sizes available (M6 thread) LNL ADPT M6 Adapter Plate 180mm $ 130 LNL ANGL M6 Angle Plate/ Stop 180x180 $ 260 LNL QUAL PLT M Indicator Ball Plate 180mm $ 270 System Accessories: Qualifying ball/bar plate can be removed quickly when not in use. Angle plate is a stop when you need to inspect quickly on the granite. Adapter plate to re use existing fixtures. Angle Plate / Stop Plate and Rail Dimensions in millimeters, 12.7mm thick, 20 x 20mm hole pattern. M6 thread Adapter Plate Unique Indicator Ball Bar Plate 2 V3.1
Loc-N-Load CMM Bundled Systems 360mm Rail Bundle System Rail, Plates, and Work Holding Kit INSPECTION ARSENAL is a ready made fixture system for CMM inspections. Create affordable, repeatable, and durable fixtures that reduce setup time for faster inspection with Loc N Load plates and non marring clamps. Aluminum plates interlock magnetically to remain firmly secured yet release quickly and easily for the next job. The system easily installs on all CMMs. A kit containing a variety of trigger action, non marring clamps and stackable, versatile components is included in system bundles to hold most any part. An order placed today can be improving productivity and profits tomorrow. Select the size Docking Rail and Plate Bundle System 360, 540, or 720mm Then choose a clamp kit for your application: Starter, Complete, or WORKS. Combine with additional plates and clamps as needed. 360 Rail Bundle System + Starter Kit $2079 + Complete Kit $2179 + WORKS Kit $3449 See Pg. 6 for all Kit contents STARTER Kit Metric (50 pcs) 540mm Rail Bundle System Rail, Plates, and Work Holding Kit COMPLETE Kit Metric (69 pcs) 540 Rail Bundle System + Starter Kit $2309 + Complete Kit $2409 + WORKS Kit $3679 The WORKS Kit Metric (138 pcs) 720mm Rail Bundle System Rail, Plates, and Work Holding Kit 720 Rail Bundle System + Starter Kit $3209 + Complete Kit $3309 Plates sold separately + WORKS Kit $4579 SELECT DOCKING RAIL & PLATE BUNDLE Plate and Rail Dimensions in mm, 12.7mm thick, 20 x 20mm hole pattern. CHOOSE A KIT Rail Size Rail 180x180 180x360 360x360 Angle Qual Starter Complete WORKS Part # Bundle Description Price mm Qty Plate Plate Plate Plate Plate TR 03M TR 02M TR 01M SYSM1_ DK360TR03 360mm Dock + Starter $2079 360 1 2 1 1 1 SYSM1_ DK360TR02 360mm Dock + Complete $2179 360 1 2 1 1 1 SYSM1_ DK360TR01 360mm Dock + WORKS $3449 360 1 2 1 1 1 SYSM2_ DK540TR03 540mm Dock + Starter $2309 540 1 1 1 1 1 1 SYSM2_ DK540TR02 540mm Dock + Complete $2409 540 1 1 1 1 1 1 SYSM2_ DK540TR01 540mm Dock + WORKS $3679 540 1 1 1 1 1 1 SYSM3_ DK720TR03 720mm Dock + Starter $3209 720 1 1 1 1 1 1 1 SYSM3_ DK720TR02 720mm Dock + Complete $3309 720 1 1 1 1 1 1 1 SYSM3_ DK720TR01 720mm Dock + WORKS $4579 720 1 1 1 1 1 1 1 V3.1 3
OPEN-SIGHT Vision Fixture Plates Open-Sight LEAN fixture concept is available for Vision systems. Docking rails fit the stage of any optical machine. Rails are black anodized aluminum. Clear, polycarbonate plates rails and plates are 12.7mm thick, 10mm spacing, M6 holes. Durable, scratch-resistant polycarbonate plates. Leveling feet available. More open viewing area. Or order blank plates to customize. Dedicate a plate to gauging for fast re-calibration. OPEN-SIGHT Aluminum Docking Rails / Polycarbonate Plates Part # Description Size (mm) Price OS-DOCK-M100 Docking Rail 100 100 x 60 $185 OS-DOCK-M200 Docking Rail 200 200 x 60 $255 OS-M100100 Plate 100 x 100 100 x 100 $250 OS-M200100 Plate 200 x 100 200 x 100 $320 OS-M200200 Plate 200 x 200 200 x 200 $460 OS-M100100-B Plate Blank 100 x 100 100 x 100 $225 OS-M200200-B Plate Blank 200 x 200 200 x 200 $410 Metric dimensions: 12.7mm thick, 10mm spacing, M6 threads Customize: Order Blank plates (no holes) and add only holes you need for greater savings. OPEN-SIGHT Vision Bundled Systems 100 mm VISION Bundle $1022 VISION KIT $597 VIS-KIT-01M OPEN-SIGHT Work Holding Kit Dedicate a plate for gauging. Includes VISION KIT Choose 100 or 200 mm combination with: 1 Docking Rail, 1 Open Sight Plate, plus Vision Kit. Add docking rails on sides of stage to create more locations for inspection. Customize: Order blank plates and add only holes you need for greater savings. OPEN SIGHT Vision Bundles: Choose 100 or 200 mm Docking Rail and Plate, Plus VISION KIT (27 pcs) 200 mm VISION Bundle $1299 Includes VISION KIT Part # BUNDLE Description Rail (mm) Price SYSM4_DK100V01 1 ea.: 100mm Dock and plate plus VIS KIT 01M 100 x 60 $1022 VISION Kit (27 pcs) Hole Adjuster 2 Adjustable Platform 1 Sliding Stop (w/ M6 screws) 2 Spring-Loc (w/ M6 screws) 2 Simple-Stop #01-OS, #06, #07 3 Trigger-Finger 2 Trigger-Point 2 Steel shaft/stand-off 4 Hex Key, asst. screws 9 SYSM4_DK200V01 1 ea.: 200mm Dock and plate plus VIS KIT 01M 200 x 60 $1299 TOTAL 27 4 V3.1
CMM Bundled Systems Portable 3D Gage Bundled System SEE WEBSITE FOR PRODUCT DETAILS Portable Gage fixture system PLUS 69-pc clamp kit includes (1) 540 x 300 Docking Rail; (3) fixture plates and (1) angle plate. Mount gage arm onto the dock and start inspecting with the interlocking fixture plates. SYS60M_ DK540TR02 Part # BUNDLE Description Price (1) 540 mm Dock; Plates: (1) 180x180, (1) 180x360; (1) 360x360; (1) angle plate; 69-pc clamp kit. M6 threads. $3690 LNL-DOCK M540300 LNL 540x300 mm Docking Plate only $1190 Optical Comparator Bundled System Optical Comparator fixture plates PLUS 50-pc clamp kit. Includes (1) Dock, made to fit optical comparators. Speed up inspections- alternate set-ups between (2)180 x 360 mm plates. Add fixture plates or mounting hardware as needed. M6 threads. SYS60M_ OC180R03 Part # BUNDLE Description Price (1) 180mm Docking Rail, (2) 180x360 mm LNL fixture plates plus 50-pc work holding kit $1740 OC-DOCK-M180 Optical Comparator Dock; 180mm $ 185 NUT-DT-ASY-M Mounting hardware (M6) for tables w/ dovetail slot $ 26 STAND-OFF & RISER Sets Stand-Off & Rest Pad Set $469 STOF-SET-30M High quality stand-offs and rest pads add flexibility in CMM fixture design. Made of plastic and steel with M6 threads. Description Qty Description Qty Combine with Starter, Complete and The Works Kits. Plastic Ht. Adjuster 2 1/2" Dia.x 12.5 mm Ht Pin Rest 3 Plastic Cone 3 1/2" Dia.x 20 mm Ht. Stand-off 3 1/2" Dia. 25 mm Ht. Stand-off 6 1/2" Dia. 50 mm Ht. Stand-off 3 Thumb Screws (M6) 2 3/4" Dia.x 12.5 mm Ht Pin Rest 3 3/4" Dia. x 20 mm Ht. Stand-off 3 3/4" Dia. x 25 mm Ht. Stand-off 6 3/4" Dia. x 50 mm Ht. Stand-off 3 Total 37 Plates sold separately SEE PG 2 ENHANCED Stand-Off Set $789 STOFE-SET-30M Enhance other work holding with height adjusters and stand-offs that can be angled in any direction. This set adds flexibility to inspection setups. Plastic and steel with M6 threads. Combine with other Kits. Description Qty Description Qty 1/2" Dia. Adjust. Stand-off 2 12 mm Thumb Screws (Metric) 2 3/4" Dia. Adjust. Stand-off 2 Plastic Cone 2 Plates sold separately SEE PG 2 3/4" Dia. Adj Knuckle 2 1/2" Dia. x 25mm Ht. Stand-off 2 Plastic Ht. Adjuster 2 3/4" Dia. x 25mm Ht. Stand-off 2 Total 16 V3.1 5
CMM Work Holding Kits STARTER Kit $629 TR-KIT-03M STARTER Kit (50 pcs) Cross-Bow Clamp 2 D-Block Stop 2 V-Block, 1 set of 2 2 Silver-Bullet, 4 sets / 3 12 INSPECTION ARSENAL for Fast trigger-action; Non-marring, low-profile. No tools, or messy tape and glue. Steel shaft / stand-off, stackable 4 Trigger-Finger 2 Hole Adjuster 2 Simple-Stop, 2 ea #01, #07 4 Stackable, versatile components. Fixture-up affordably Add sets or plates as needed. Hex Keys, plus assorted screws 20 50 Affordably create multi-part fixtures. COMPLETE Kit $729 TR-KIT-02M COMPLETE Kit (69 pcs) Cross-Bow Clamp 4 D-Block Stop 4 Trigger-Block Clamp 2 Silver-Bullet, 4 sets / 3 12 V-Block, 1 set of 2 2 Steel shaft / stand-off, stackable 4 Trigger-Finger 2 See Page 7 for a complete listing of Inspection Arsenal work holding. Hole Adjuster 2 Simple-Stop Rails, 1 set / 7 7 Hex Keys, plus assorted screws 30 69 The WORKS Kit (M6) $1999 TR-KIT-01M Spring-Loc, Sliding Stop Simple-Stop Rails The WORKS Kit (138 pcs) Qty Spring Clamps Cross-Bow Spring Clamp 4 D-Block Spring Stop 4 Trigger-Block Spring Clamp 2 Trigger-Finger hold-downs 2 Stackable steel shafts 4 Spring-Loc Low-profile Clamp 2 Risers & Stand-offs Silver-Bullet Stand-off, 4 Sets / 3 12 V-Block, 1 set of 2 2 Stops & Rails Simple-Stop Rails, 1 Set / 7 7 Hole Adjuster for Trigger-Finger 2 Sliding Stop Low-profile Stop 2 Hex Keys, plus assorted screws 42 STAND OFF & RISER SETS See Page 7 for Set descriptions Stand-Off & Rest Pad Set 37 Enhanced Stand-Off Set 16 138 PLUS 5S FOAM DRAWER INSERTS The WORKS Kit is a combination of components found in Inspection Arsenal sets, including clamps, rails, stand-offs, and risers. This kit contains everything you need to create multiple fixtures across several CMMs. Stand-Off & Rest Pad Set Plate sold separately Enhanced Stand-Off Set Plate sold separately 6 V3.1
CMM Work Holding Sets Spring Clamps Risers & Stand-offs Cross-Bow D-Block Trigger-Block Steel Shaft Silver-Bullets 25, 50, 75 mm Spring-Loc Trigger-Finger Trigger-Point V-Block Simple-Stops - set of 7 Stops & Rails Adjustable Platform Sliding Stop Hole Adjuster for Steel Shaft SS-01-OS Stop for Vision WORK HOLDING SETS Dimensions are Metric; screws are M6 Part # (Metric) Description Qty Price Spring Clamps CRBW 30M Cross Bow Spring Clamp (M6) 8 $ 69.00 D BLK 30M D Block Spring Stop (M6) 8 $ 69.00 TRBL 30M Trigger Block Spring Clamp 6 $ 69.00 SPR LOCM Spring Loc Low profile Clamp 2 $ 89.00 TRFN 20M Trigger Finger & steel shaft 4 $ 105.00 TRFN 10M Trigger Finger sold separately 1 $ 10.95 TRPT 20M TriTrigger Point & steel shaft 4 $199.00 Risers & Stand offs VB 001M V Block 90 included angle 2 $ 159.00 SIBU SO 100M Silver Bullet Stand off (Metric) 12 $ 299.00 (Set= 4 ea. 25,50,75mm ) TRFN SHAFTM Steel shaft / stand off (Metric) 4 $ 69.00 Part # (Metric) Description Qty Price Simple Stops Stops & Rails SIST RS 100M Simple Stop Brushed Stainless Steel, 7 $239.00 Set of 7, #SS 01 OSM, SS 02M, SS 03M, SS 04M, SS 05M, SS 06M, SS 07M Stops & Rails ADJ PLT 10M Adjustable Platform for TRFN, TRPT 1 $ 49.90 HA M6 Hole Adjuster for Trigger Finger 2 $ 69.00 SLI STOP M Sliding Stop Low profile Stop 2 $49.00 SS 01 OSM Simple Stop for Vision, serrated edge 1 $69.00 V3.1 7
RAPID-LOC Pneumatic Vise RAPID-LOC Air Vise for CMM Inspections Rapid Loc Air Vise SYSTEM, 63.5mm Assembled Rapid Loc Vise System, 63.5mm Part # Description Price RL VISE SYS02M Rapid Loc Vise SYSTEM 63.5mm FULLY assembled complete with soft jaws, fittings, nylon tubing, and valve. $799.00 RL RegulatorM Air Regulator $ 90.00 Add extra Soft Jaws inspect multiple parts with one vise! Rapid Loc Vise SYSTEM, 63.5mm, with soft jaws, fittings, valve, tubing. Regulator, LNL Rail & Plates sold separately. RL SJaw 02M Alum Soft Jaws $ 69.00 Multi vise Connector Pack Everything you need to create a multi vise fixture. Order 1 pack per vise for two or more vise setups. Soft Jaws Air Regulator RL MV PackM Elbows, Tees, and 6 Tubing, $ 49.90 RL Port PlugsM 1/8 tube to 1/8 NPT 4 port w/plugs $ 49.90 Plates Sold Separately See Pg. 2 Multiple Vise fixture to inspect multiple parts per shift! ** Quick Connect (customer supplied) needed to attach to your compressed air ** Testimonial: According to LEAN practitioners there is now an opportunity for manufacturers to begin making significant improvements in QC uncovering hidden profits without breaking the bank. Inspection Arsenal product line eliminates many non value added setup steps through their CMM and Vision fixture plates and work holding. By fixturing up and simplifying the inspec tion task for repeatable and documented steps, a standard work opportunity has been created to speed inspection and in crease the number of parts inspected, even with a less skilled inspector. Implementation will reduce the downtime of expensive machines on the shop floor higher machine utilization (e.g., running spindles, cutting chips) increases profits. Dwighd Delgado, LEAN Six Sigma Instructor and Practitioner, CQE 8 Patent # 8,979,086 and 8,931,772 www.fixture-up.com cphillips@fixture-up.com Phone: 508-869-0373 V3.1