VFX70m Electronic Programmable Display Programmed with Eaton Pro-FX Control Software 32-bit Processor, 7 WVQA Sunlight Viewable Display The high performance VFX70m display is designed to provide an operator interface for mobile on and off highway applications. This HMI features a powerful processor, bright sunlight viewable optically bonded LCD assembly, configurable CAN channels and flexible IO to meet the needs of a variety of demanding applications. Technical Data Functional Specification - Physical & Environmental Dimensions 10.27 x 5.67" x 2.512" Weight 2.25 lbs Case Material Polycarbonate back case Storage Temperature Range -40 C to +85 C Operating Temperature Range -40 C to +85 C Heater Standard IP Rating - Front IP66, IP67 IP Rating - Back IP66, IP67 Power Supply Supply Voltage Peak Supply Voltage Max Power Consumption Max Power Consumption with Heater Option Max Sleep Current Ignition Pin (K15) 6-36 VDC 36 VDC 10 W 22 W 400 ma Ignition pin will put the unit in sleep mode when it powered off.
Technical Data CPU CPU Frequency Bit Width Operating System Freescale i.mx357 532 MHz 32 bits Linux Memory RAM Data Memory (RAM retain) Flash (ROM program & data combined) 128 MB DDR2 1 MB 2 GB Standards Vibration 7.86 G RMS (5-2000Hz) SAE J1455 Section 4.9.4.1 Shock 50g - SAE J1455 Section 4.10.4 Radiated immunity SAE J1113-21 (150V/m), SAE J1113-26 (15kV/m), EN61000-4-3 (10V/m) Radiated emission SAE J1113-41 (Class 4), CISPR 11 Class B/EN60945 Hybrid Conducted immunity SAE J1113-2 (3.0Vp-p), SAE J1113-4 (200mA), SAE J1113-11 (Level 4), SAE J1113-12 (Level 4), EN61000-4-4, EN61000-4-5, EN60945 Sec 10.3 (3V/10V RMS) Certifications CE Mark Graphical Interface Display Bonded, Color Transmissive TFT LCD; LCD Size 7 Resolution 800 x 480, WQVGA Color Format Supported 16-bit color Aspect Ratio 16:9 Orientation Landscape Display Back Light LED, >1000 cd/m2 (50,000 hr lifetime) Sunlight View ability Direct sunlight Touch Interface (Optional Feature - Not Included on all Models) Touch screen technology Projected capacitive Video Interface (Optional Feature - Not Included on all Models) Video 3 NTSC/PAL Boot-up Boot-up Screen Boot (first powered-on): Wake (ignition switched): Customizable TYP. ~ 9 sec. to logo, 17 sec. to first screen TYP. ~1 sec. 2 EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Technical Data Communications CAN Interface 1 CAN Specification 2.0 A, 2.0B Baud rates Configurable 125 KBPS, 250 KBPS, 500 KBPS, or 1MBPS Protocols J1939 and CANOpen Master CAN Interface 2 CAN Specification 2.0 A, 2.0B Baud rates Configurable 125 KBPS, 250 KBPS, 500 KBPS, or 1MBPS Protocols J1939 and CANOpen Master USB Interface USB Specification USB 2.0 Baud rate Supports USB Full Speed at 6Mbit/s Note: USB interface is not protected against battery level faults. RS-485 Interface RS-485 Specification Modbus Ready Baud rate Real Time Clock Estimated Battery Life Rechargeable Debugging Console RS-485 port is dedicated to a Linux console. 115200 BPS Minimum 9.5yr (display never powered) No, Lithium (non-replaceable) Keypads Number of Buttons 14 Button Style Tactile Feedback Button Backlight Yes Digital Inputs x 5 High Side In Input Impedance 10kOhm Scan Rate 10Hz (100 ms) Switch-on Level 4.01V( 80% Supply Voltage ) Switch-off Level 1.04V( 20% Supply Voltage ) Short circuit protection 28V or Ground Analog Inputs x 3 (Software Configurable) Resolution 10 bits Accuracy +/- 1% FS Measuring Ranges Digital, 0-5V, 4-20mA, Resistive Scan Rate 10Hz (100 ms) Digital Input Input Impedance Switch-on Level Switch-off Level High Side In 100kOhm 4.01V (80% Supply Voltage) 1.04V (20% Supply Voltage) EATON VFX70m Datasheet E-ELDI-TT002-E August 2013 3
Technical Data Voltage Input - 0-5V Input Impedance 100kOhm Current Input - 0-24 ma Input Impedance 200 Ohm Resistive (0-5V) Pull-up Resistance 400 Ohm Frequency Input Input Impedance (Design Review Required) Input Frequency Switch-on Level Switch-off Level 3.6VAC 120VAC 14.02 Kohm 2 Hz 10kHz 2.10 V 1.17 V Outputs Digital Output 500 ma Amperage Protection Low-side 500 ma Max. Short Circuit Protection Frequency Output Duty Cycle Frequency Range Square Wave 50%, non-adjustable 2 Hz to 3 khz Connections Connector 2 x 23 pin Ampseal Manufacturer Model Contact Surface AMP 770680-1( Black), 770680-4(Gray) Nickel plated Tooling Manufacturer AMP Hand Tool Part Number 58529-1 Die Part Number 58529-2 4 EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Block Diagram VFX70m Screen: 7 Bonded, Color Transmissive TFT LCD 16 8 Tactile Feedback Buttons Processor: Freescale i.mx357, 32 bits,532 MHz Memory: RAM -128 Mbytes, Flash - 256 Mbytes 7B 15B VBATT+ IGN Display Power VBATT- 8B 18G 17G 16G 12G 20G 19G 6B 5B 19B 18B USB_+5V USB_D+ USB_D- USB_1D USB_Shield USB_GND CAN1_H CAN1_L CAN2_H CAN2_L Programing Interface CAN Bus (J1939/CANopen) RS485 Video (Pins only connected on video version) RS485_H RS485_L Video1_Input Video1_GND Video2_Input Video2_GND Video3_Input Video3_GND 4G 5G 1G 9G 2G 10G 3G 11G 1B 13B 12B 20B 21B 4B 11B 3B 10B 2B 9B DigitalIn1 DigitalIn2 DigitalIn3 DigitalIn4 DigitalIn5 AnalogIn1 AnalogIn1_GND AnalogIn2 AnalogIn2_GND AnalogIn3 AnalogIn3_GND Digital Input (Digital Lowside) Analog Input (0-5V, 4-20mA, Resistive) Digital Output (Digital Lowside) Frequency Output DigitalOut1 FreqOut1 22B 14B 13G 14G FreqIn1 FreqIn1_GND Frequency Input Note: B & G pin designations indicate black and gray connector locations EATON VFX70m Datasheet E-ELDI-TT002-E August 2013 5
Connector Pins Connector 1 Deutsch AMP770680-1 (Black) Pin 1 Ground 2 Analog Input 3 3 Analog Input 2 4 Analog Input 1 5 CAN1 L 6 CAN1 H 7 Battery 8 Ground 9 Analog Input 3 Ground 10 Analog Input 2 Ground 11 Analog Input 1 Ground 12 Digital Input 3 13 Digital Input 2 14 Frequency Output 1 15 Ignition In 16 No Connect 17 No Connect 18 CAN2 L 19 CAN2 H 20 Digital Input 4 21 Digital Input 5 22 Digital Output 23 Frequency Output 2 Connector 2 Deutsch AMP770680-4 (Grey) Pin 1 Video Input 1 2 Video Input 2 3 Video Input 3 4 RS485H 5 RS485L 6 No Connect 7 No Connect 8 No Connect 9 Video Input 1 Ground 10 Video Input 2 Ground 11 Video Input 3 Ground 12 USB ID 13 Frequency Input 14 Frequency Return 15 No Connect 16 USB D- 17 USB D+ 18 USB 5V 19 USB Ground 20 USB Shield 21 No Connect 22 No Connect 23 No Connect 6 EATON VFX70m Datasheet E-ELDI-TT002-E August 2013
Mounting Configurations - Front, Back and Gimble.559 14.19 1.960 49.79.559 14.19 1.960 49.79 1.960 49.79.407 10.34 1.069 27.15 5.522 10.277 140.26 261.04 5.677 144.19.559 14.19 5.677 BRASS INSERTS 144.19 5.522 140.26 1.069 27.15 5.522 140.26 10.277 261.04.559 14.19 4.894 124.30 1.960 49.79.407 10.34 9.420 239.26 1.069 27.15 4.894 124.30 2.756 70.00 4.894 124.30 2.756 70.00 C STAINLESS INSERTS BRASS INSERTS 1.069 27.15 9.420 239.26 5.677 144.19 9.420 239.26 2.756 70.00 STAINLESS INSERTS 5.522 140.26 4.894 124.30 C 8.878 225.50 9.692 246.19 2.756 70.00 STAINLESS INSERTS 5.677 144.19 8-32 X.25" BRASS INSE.407 10.34 STAINLESS INSERTS 10.277 261.04 5.677 144.19 BRASS INSERTS.407 10.34 C 8.878 225.50 9.692 246.19 EATON VFX70m Datasheet E-ELDI-TT002-E August 2013 7
Eaton Hydraulics Group USA 14615 Lone Oak Road Eden Prairie, MN 55344 USA Tel: 952-937-9800 Fax: 952-294-7722 www.eaton.com/hydraulics Eaton Hydraulics Group Europe Route de la Longeraie 7 1110 Morges Switzerland Tel: +41 (0) 21 811 4600 Fax: +41 (0) 21 811 4601 Eaton Hydraulics Group Asia Pacific Eaton Building No.7 Lane 280 Linhong Road Changning District, Shanghai 200335 China Tel: (+86 21) 5200 0099 Fax: (+86 21) 2230 7240 2013 Eaton All Rights Reserved Printed in USA Document No. E-ELDI-TT002-E August 2013