Data sheet MCX06C Programmable controller MCX06C is an electronic controller that holds all the typical functionalities of MCX controllers in the 32x74 mm standard size: programmability connection to the bus local network Modbus RS485 serial interface Features MCX06C 4 analog and 6 digital inputs 2 analog and 6 digital s Insulated power supply 20 / 60 V DC - 24 V AC Easy upload of application software through bus connection for programming key Remote access to data through bus connection for additional display (LCD available) and keyboard RTC clock for managing weekly time programs and data logging information Modbus RS485 serial interface Display LED with 2 groups of digits for showing the desired information in one screen Dimensions 33x75 mm Panel mounting Danfoss DCS (za) 2016.02 DKRCC.PD.RI0.A3.02 520H10637 1
General features FEATURES DESCRIPTION Power supply 20 / 60 V DC and 24 V AC ± 15% 50/60 Hz Maximum power consumption: 6 W, 9 VA Insulation between power supply and the extra-low voltage: functional Plastic housing Self extinguishing V0 according to IEC 60695-11-10 and glowing / hot wire test at 960 C according to IEC 60695-2-12 Ball test 125 C according to IEC 60730-1 Leakage current: 250 V according to IEC 60112 Operating conditions CE: -20T60 / UL: 0T55, 90% RH non-condensing Storage conditions -30T80, 90% RH non-condensing Integration In Class I and / or II appliances Index of protection IP64 ~ NEMA3R only on the front cover Period of electric stress across insulating parts Long Resistance to heat and fire Category D Immunity against voltage surges Category I Software class and structure Class A Approvals CE compliance: This product is designed to comply with the following EU standards: Low voltage guideline: 73/23/EEC Electromagnetic compatibility EMC: 89/336/EEC and with the following norms: EN61000-6-1, EN61000-6-3 (immunity for residential, commercial and light-industrial environments) EN61000-6-2, EN61000-6-4 (immunity and emission standard for industrial environments) EN60730 (Automatic electrical controls for household and similar use) UL approval: UL file E31024 Danfoss DCS (za) 2016.02 DKRCC.PD.RI0.A3.02 520H10637 2
Inputs/s I/O TYPE NUM SPECIFICATIONS inputs 0 / 1 V 0 / 5 V 2 AI1, AI2 inputs selectable via software between: temperature probes, default: 10 kω at 25 C pressure transducers with Universal 2 AI3, AI4 Universal analog inputs selectable via software between: ON/OFF (current: 20 ma) 0 / 1 V, 0 / 5 V, 0 / 10 V 0 / 20 ma, 4 / 20 ma (10 kω at 25 C) Pt1000 12 V+ power supply 12 V DC, 50 ma max for 4 / 20 ma transmitter (total on all s) 5 V+ power supply 5 V DC, 80 ma max for 0 / 5 V transmitter (total on all s) Digital input s Digital Voltage free contact 0 / 10 V 6 DI1, DI2, DI3, DI4, DI5, DI6 Current consumption: 5 ma 1 AO1 selectable via software between: pulsing, synchronous with the line, at modulation of impulse position () or modulation of impulse width (): pulsing, at modulation of impulse width () with range 100 500 Hz: 0 / 10 V DC non optoinsulated, referred to the ground 10 ma maximum loads 1 AO2 selectable via software between: pulsing, synchronous with the line, at modulation of impulse position () or modulation of impulse width (): pulsing, at modulation of impulse width () with range 100 500 Hz: Relay 6 Insulation between relays: functional (common lines internally connected) Insulation between relays and the extra-low voltage parts: reinforced Total current load limit: 6 A C1-NO1, C2-NO2, C3-NO3, C4-NO4, C5-NO5, C6-NO6 Normally open contact relays characteristics of each relay: 4 A 30 V DC / 250 V AC for resistive load - 100.000 cycles 0.7 A 250 V AC for inductive load - 100.000 cycles with cos(phi) = 0.5 UL: 240 V AC - 1 A resistive - 1.0 FLA - 6.0 LRA - 96 V A pilot duty 30.000 cycles Danfoss DCS (za) 2016.02 DKRCC.PD.RI0.A3.02 520H10637 3
Connection diagram DI 1 DI 3 DI 5 to the AI (80 ma max) UNIVERSAL Pt1000 ON/OFF 0/1 V 0/20 ma 4/20 ma local network * TTL Serial Comm. (if expected) Pt1000 ON/OFF 0/1 V 0/20 ma 4/20 ma RS485 (Modbus) (if expected) L N POWER SUPPLY DIGITAL OUTPUT UNIVERSAL L H R1 20 485 VCC TX/D+ DIR RX/D- ID L H C 1 N0 1 C 2 N0 2 C 3 N0 3 C 4 N0 4 C 5 N0 5 C 6 bus N0 6 Power supply board INPUT/OUTPUT A0 2 DI 2 DI 2 DI 4 DI 4 DI 6 DI 6 12V+ AI 2 AI 4 L 1 N 1 A0 1 speed regulator DI 1 DI 3 DI 5 5V+ to the AI (50 ma max) AI 1 AI 3 GND GND MCX06C Danfoss 80G8033.01 L 24 V AC N ** L N *NOTE: connection has to be made on the first and last local network units, make the connection as close as possible to the **NOTE: C1, C2, C3, C4, C5, C6 internally connected between themselves Connection CONNECTORS TYPE DIMENSIONS Input and / 485 Power supply Digital 1-6 18 way Molex Microfit type (43025-1800) 4 way Molex Wire-to-board type (87369-0400) 8 way Molex Wire-to-board type (87369-0800) 2 way Molex KK type (09-50-8021) 12 way Molex Minifit Jr. type (39-01-2125) Molex: (43030-0001) section cable AWG20-24 (0.52-0.20 mm²) Molex: (43030-0004) section cable AWG26-30 (0.13-0.05 mm²) Instrument for the Molex crim code 69008-0982 (20-24 AWG) code 69008-0983 (26-30 AWG) Molex: (50212-8000) section cable AWG24-30 (0.20-0.05 mm²) code 63811-1200 Molex: (50212-8000) section cable AWG24-30 (0.20-0.05 mm²) code 63811-1200 Molex: (08-50-0105) section cable AWG18-24 (0.82-0.20 mm²) Molex: (08-50-0107) section cable AWG22-26 (0.32-0.13 mm²) code 69008-0953 Molex: (39-00-0077) section cable AWG16 (1.30 mm²) Molex: (39-00-0038) section cable AWG18-24 (0.82-0.20 mm²) Molex: (39-00-0046) section cable AWG22-28 (0.32-0.08 mm²) code 69008-0724 Danfoss DCS (za) 2016.02 DKRCC.PD.RI0.A3.02 520H10637 4
Dimensions 33 28 29 Danfoss 80G8034.01 75 75 71 84 13 User interface TYPE FEATURES DESCRIPTION LED Display LED display with two groups of digits and 18 icons display Danfoss 80G8035.01 Digits Green colour Allarm/warning icons Red colour Other icons Yellow / amber colour Meaning of the icons and digits Settled by the application software Dimensions 45x17 mm Keyboard Number of keys 4 Keys function Set by the application software Product part numbers DESCRIPTION MCX06C, 24V, LED, RS485, RTC, S MCX06C, 24V, LED, RS485, RTC, I/36 Note: single pack codes (S) don t include standard kit s, industrial pack codes (I) don t include standard kit s CODE NO. 080G0066 080G0107 Accessories part numbers DESCRIPTION MCX06C CONNECTORS KIT ACCCNX, WIRED CONNECTORS KIT FOR MCX06C, 1m CABLE ACCCNX, WIRED CONNECTORS KIT FOR MCX06C, 2m CABLE CODE NO. 080G0175 080G0081 080G0082 Danfoss DCS (za) 2016.02 DKRCC.PD.RI0.A3.02 520H10637 5