RAAR Enterprises, Inc. S. California Sales ffice P Box 3476 Redondo Beach, CA 90277 USA Ph: 310-487-3800 Fx: 702-947-6320 Director: Rick Schotts Email: rick.raargroup@gmail.com DUNS #: 079-275-790 Established Since 1985/Veteran wned www.raarenterprises.net kuma MILLAC 853PF-5X # 50 Taper Precision 5 Axes Vertical Profiler Machining Center, complete with FANUC Series 31i-A5 and 120" table in accordance with the following specifications:
Machine Specifications Capacities: Table Size 125.95 x 33.46 Maximum Load on Table 6,614 lbs Spindle Nose to Table Surface 5.91 33.46 Floor to Table Surface 42.52 Spindle Center to Column Slideway 36.61 Axis Drives: X-Axis Travel 120.1 Y-Axis Travel 33.46 Z-Axis Travel 27.56 A-Axis Travel ±35 B-Axis Travel ±35 X-Axis Ball Screw Diameter/Pitch 2.48 / 0.42 Y-Axis Ball Screw Diameter/Pitch 1.97 / 0.63 Z-Axis Ball Screw Diameter/Pitch 1.97 / 0.47 X, Y, & Z Axis Thrusts 3,527 lbs X, Y & Z Axis Cutting Feedrates 0.039-945 ipm A & B Axis Cutting Feed 2,400 /min X & Y Axis Rapid Traverse Rate 1,181 ipm Z Axis Rapid Traverse Rate 945 ipm A & B Axis Rapid Traverse Rate 3,600 /min Spindle: Spindle HP Rating 75 HP Spindle Bore Taper CAT 50 Spindle Speed Range 60-12,000 RPM Spindle Speed Change Double Wound Motor Spindle Bearing I.D. 3.54 Automatic Tool Changer: Magazine Capacity 30 Tools Applicable Tool Shank CAT 50 Pull Stud P50T-II Maximum Tool Diameter (with adjacent tools) 4.92 Maximum Tool Diameter (without adjacent tools) 7.87 Tool Change Time (tool to tool) 9 seconds Tool Change Time (chip to chip) 16 seconds Electrical: Total Power Required Spindle Drive Motor Feed Motor X/Y/Z/A- Axis Feed Motor B-Axis (2 units) Hydraulic Pump Motor Slideway Pump Motor Coolant Pump Motor Chip Flushing Pump Motor Reservoirs: 116 kva AC 45/55 kw AC 7 kw AC 3 kw AC 2.8kW AC 17 W AC 1.1 kw AC 1.5kW
Hydraulic Tank Spindle Lubrication Tank Slideway Lubrication Tank Coolant Tank 2.64 gallons 10.57 gallons 3.17 gallons 317 gallons Machine Dimensions & Weight: Height 10.83 (129.92 ) Floor Space (Length x Depth) 28.22 x 15.1 (338.58 x 181.1 ) Weight 44,093 lbs3 FANUC 31i-A5 CNTRL SPECIFICATINS Specifications PF Series/ 31i-A5 : Standard Item Specifications Drawing # Series 31i- A5 Controlled Axes Controllable axes expansion (each path) (including PMC axes and Cs axes) Max 12 axes J801 Simultaneously controlled axes expansion (each path Max 5 axes J803 Increment System C 0.0001mm, 0.0001, 0.00001" J805 Controlled Axes continued Inch/Metric conversion J876 Stored stroke check 1 Mirror image each axis peration Program number search Sequence number search Program restart J838 peration continued Dry run Single block Manual reference position return Reference position setting without DG Manual handle feed 1-unit 1 unit J835 3-dimensional manual feed S679 Incremental feed x1, x10, x100, x1000, x10000 Interpolation Functions Nano interpolation Positioning G00 (Linear Interpolation type positioning is possible) Single direction positioning G60 J812 Exact stop mode G61 Tapping mode G63 Cutting mode G64 Exact stop G09 Linear interpolation Circular interpolation
Dwell (Second designation) Dwell in seconds and dwell in revolution (In case of dwell in revolution for M system, threading, synchronous cutting option is required) Helical interpolation Circular interpolation plus max. 2 axes linear interpolation Smooth interpolation J777 Nano smoothing Al contour control I or II is required S687 Nano smoothing 2 Al contour control I or II is required R512 Reference position return G28 Reference position return check G27 2nd reference position return Item Specifications Drawing # Series 31i- A5 Interpolation Functions continued 3 dimensional circular interpolation S673 Feed Function Rapid traverse override Fo, 24,50, 100% or 0~100% (1% step) Feed per minute Automatic acceleration/deceleration Rapid traverse bell-shaped acceleration/deceleration Bell-Shaped acceleration/deceleration after cutting feed interpolation Rapid traverse: linear, Cutting feed: exponential, linear Feedrate override 0-254% 2nd feedrate override 0-254% J810 Inverse time feed J715 Jog override 0-655.34% Automatic corner deceleration included in Al contour control I or II Al contour control II High-speed processing Look-ahead block no. is Max. 200 (Path # <=4 and axes number <=20) Look-ahead block no. is Max. 600 Al contour control II is required. (Path # <=2 and axes number <=12) Jerk control Al contour control II is required S678 Program Input ptional block skip 1 ptional block skip 9 J955 Max. programmable dimension ±9 digit (R,I,J and K is ±12 digit) Program file name 32 characters Sequence number N8 digit Absolute/incremental programming Combined use in the same block Decimal point programming/pocket calculator type decimal point programming Plane selection G17, G18, G19 Coordinate system setting Automatic coordinate system setting Workpiece coordinate system G52-G59 J894 Addition of workpiece coordinate system 48-pairs 48 pairs J895 Programmable data input G10 J819 J829 S808 S809
Programmable parameter input Sub program call 10 folds nested Custom macro J873 Addition of custom macro common variables #100- #199, #500-#999 J887 Canned cycle for drilling J890 Automatic corner override J891 Coordinate system rotation J893 3-dimensional coordinate system conversion J713 Tilted working plane command S676 Programmable mirror image J880 Item Specifications Drawing # Series 31i- A5 Program Input continued Tape format for FS15 J882 Integrated peration guidance function Multiple command of auxiliary function 3 Spindle orientation 1 spindle J853 Rigid tap J828 Tool function/ Tool compensation Tool function T8 digit Tool offset pairs (99-pairs) 99 J926 /853PF Tool offset pairs (200-pairs) 200 J927 /2040,2565PF /853PF Tool offset memory C Distinction between geometry ad wear, or between cutter and tool length comparison J937 Tool length offset Tool center point control S677 Tool radius-tool nose radius compensation J930 3-dimensional tool compensation J727 Tool geometry/wear compensation J727 Tool length measurement Tool length compensation in tool axis direction S670 3-dimensional tool radius compensation S667 Tool life management J935 Addition of tool pairs for tool life management Max. 1024 pairs J936 Accuracy compensation function Backlash compensation Backlash compensation for each rapid traverse and cutting feed Smooth backlash compensation Stored pitch error compensation J841 Editing peration Part program storage length 2Mbyte J948 4Mbyte J949 8Mbyte J959 Number of Registerable programs expansion 1 Max 1000 programs J953
Part program editing Extended part program editing Background editing J956 Memory card program edit & operation Max 63 programs. The tool on PC is required to convert and store files to memory card Setting and Display Current position display Program comment display Program name 31 characters Item Specifications Drawing # Setting and Display continued Parameter setting and display Alarm display Alarm history display peration history display Embedded Ethernet J381 Fast Ethernet ption board is required S707 : ption Series 31i- A5 Run hour and parts count display J971 Actual cutting feedrate display Servo setting screen Servo waveform display Maintenance information screen Help function Self-diagnosis function Periodic maintenance screen Display of hardware and software configuration Servo information screen Graphic function J972 Data input/output Reader/puncher interface Reader/Puncher (Ch. 1) Interface J900 Fast data server Memory card input/output nly 1 path control/option board is required Screen hard copy *2 Interface function S737
MILLAC-853PF with FANUC-31i-A5 CNC Controller and USA Standard Specifications Standard Specification - AC USA Standard Spindle Motor VAC 45/55kw Spindle Speed 60~12,000min-1 ATC Magazine Capacity 30 Tools Tool Shank CAT50 / Pull Stud CAT50-U Pull Stud Bolt CAT50-U (Thru Coolant Type) - 30 Sets Dual Contact Spindle Nose (BIG-PLUS) Table Size 3,200mm X 850mm Table T Slot Metric Spec. 18mm ATC Air Blow Standard Accessories Tool Release Lever @ Magazine Lubrication for Spindle Bearing: il-mist Spindle Unit Cooling System (il Controller) Door Interlock Coolant Tank 2400L Coolant Pump 2.2Kw Extended Capacity Way Lube Tank (12L) Chip Conveyor, Hinge Type Coolant Nozzle Fish-Eye Type (4pcs) Flush Coolant for W-Shaped Stainless il Pan Rotary Scale Feed Back (A & B Axis) Work Light: Halogen Type / Fluorescent Light Machine Leveling Pad Full Closed Enclosure Buzzer for Alarm/Cycle Completion Tempered Glass on Front Door Auto Power ff Status Lamp for Spindle High/Low Position Status Lamp for A-Axis Half Brake n Spindle Speed / Load Meter UL Standard NFB/Circuit Protector Chip Air Blow Pre-Arrangement for Spindle Through Coolant (For 7mpa) PL Regulation Machine Lifting Hooks Manuals (Std. Book Set + CD) FANUC-31ia5 Standard Specification AI Contour Control 2 Kit 5-Axis Simultaneous Kit USA Kit Part Program Storage Size 2MB (5,120m) Number of Registered Programs Expansion 1 Inverse Time Feed Tool ffset Memory C Tool Length Compensation In Tool Axis Direction NURBS Interpolation Tilted Working Plane Command High Speed Cutting Function (CJ Software) Tandem Control Memory Protect Key Switch MILLAC-853PF with FANUC-31i-A5 CNC Controller and USA Standard Specifications Interpolation type compensation..included Abnormal load detection Included Nano Smoothing.Included
Transformer 480/220..Included Including: All standard equipment outlined in proposal Total List Price (as listed above)... $469,000.00