Operator's Guide The purpose of this guide is to provide the basic operation for this equipment. For more detailed information, see the Operator's Manual. FMD-3200/FMD-3200-BB/FMD-3300 All brand and product names are trademarks, registered trademarks or service marks of their respective holders. ECDIS English Controls The system can be operated with the controls or the trackball module. The procedures in this operator s guide use the trackball module. Alert status LED The color and state of the LED change according to alert status. - Green, lighting: Normal operation status; no alerts generated. - Red, flashing: Alert generated (not acknowledged). - Red, lighting: Alert generated and acknowledged. BRILL knob Rotate: Adjust brilliance of FURUNO monitor. Push: Select display palette. A/C RAIN, A/C SEA knob No use. GAIN knob Adjust the gain of the radar picture. VRM rotary encoder Adjust active VRM. VRM 1: Activate, deactivate VRM1. VRM 2: Activate, deactivate VRM2. POWER switch Turn the system on/off. (This control does not switch the monitor on/off.) USB port Connect USB flash memory. EBL rotary encoder Adjust active EBL. EBL 1: Activate, deactivate EBL1. EBL 2: Activate, deactivate EBL2. Trackball module Operates like a PC mouse. VIEW/HIDE key Show/hide the Instant Access Bar and Route Information box. ALARM ACK key Alert acknowledgement for alerts generated by chart, navigation, etc. ACQ key Activate cursor-selected sleeping AIS target. Instant Access knob Access functions on the Instant Access Bar. - Rotate: Select item. - Push: Confirm selection. ESC key Go back one step in the current sequence. TARGET DATA key Display the detailed target data for selected TT, AIS target. Keyboard A keyboard for entering alphanumeric data. MFD key Toggle ECDIS and Conning modes. UNDO key RANGE key Undo the last operation, when Select the chart creating a route and user chart. scale. TARGET CANCEL key Sleep cursor-selected AIS target.
Display Layout Status Bar (See page 3.) Instant Access Bar (See page 4.) Chart scale, presentation mode box Cursor position box Sensor information box Upper section Electronic chart area Own ship functions box Route information box Overlay/NAV Tools box (See page 11.) Lower section Alert box EBL1 box, EBL2 box Permanent warnings box VRM1 box, VRM2 box 2
Status Bar Status Bar OTHERS: Play back log. PLAN: Select the Voyage planning mode. CHARTS: Select the Chart maintenance mode. NAVI: Select the Voyage navigation mode. Operating mode: Select the ECDIS mode, ECDIS or Conning. How to open a drop-down list Chart format: Select chart format, vector or raster. User settings: - Show the Settings menu. - Manage profiles. Spinner: Rotates clockwise if the system is working properly. Time: Time (local or UTC) STD DISP: Restore IMO standard display. Display the operator's manual, ECDIS program no. and system information. Date: Display the date; select the time to use, local or UTC. Drop-down list CHART ONLY: Show only the chart, when left button is pressed and held down. Chart database: Select the pre-defined presentations of ENC content: IMO BASE, IMO STD or IMO ALL. 3
Instant Access Bar Upper section (by operating mode) Lower section Voyage navigation mode MSG: Open the AIS/NAVTEX message menu window to process AIS/NAVTEX messages. Select: Open route selection menu window to select the route to follow. Unselect: Stop following a route. Move to Plan: Transfer route to Voyage planning mode to edit route. License: Show chart viewing date setup window. Route INFO: Find details about route. Manual Update: Open the manual update menu window to insert chart update symbols manually. Chart maintenance mode Auto Load: Start automatic installation of the chart data (CD or DVD ROM). Manage Charts: Manage chart cells (grouping, deleting, etc.). Cell Status: Show the chart catalog to get info about charts installed in the system. License: Show chart viewing date setup window. Public Key: Open public key management window. SET: Show setting windows for chart, symbol, user chart. TWO DISP: Split screen int two, horizontally or vertically. AIO: Display Admiralty Information Overlay. Show software keyboard. Mini conning: Show and hide the mini conning display, available in the Voyage navigation a Planning navigation modes. Chart Legend: Find data about current chart. Viewing Dates: Set display date and approved until dates. Chart 1: Show overview of ECDIS chart symbols. Voyage planning mode Report: See route reports on waypoints and passage plan as well as user chart reports. Route: Create a route (see page 5). User Chart: Creat a user chart (see page 7). Select a color palette. Record buttons: Record user/position events to the event log; access various logs. Adjust display brilliance. Guide Box: A guide box instantly tells the operators the range and bearing between the last waypoint and the cursor position as you drag the cursor. MOB: Mark man overboard position. Take a screenshot. Manage Data: Delete routes and user charts. Undo past action. 4
Routes How to create a route PLAN Plan -ning Route New Waypoint WPT5 161.4 353.3NM WPT6 WPT1 Continue adding positions. Right click after inserting final waypoint; select [Finish]. WPT2 106.9 1748.5NM WPT1 201.5 2137.2NM WPT4 309.0 971.4NM WPT3 25.8 1470.2NM Save as Enter name OK Left-click a position to mark a waypoint. 5
Routes (con t.) How to select a route to navigate Select Route Select Route Route32 AAAAAA Route67 Name Date 12 Aug 2011 10 Apr 2011 19 Sep 2011 Name Route32 RouteAAAAAA Route67 Date 12 Aug 2011 10 Apr 2011 19 Sep 2011 Select a route. Selected. To stop navigating a route: Select [Route]. Total WPTs : 42 Total DIST : 7736 NM NAVI Route Unselect Start WPT : 34 37.058 N 135 13.260 W Final WPT : 60 10.032 N 24 56.030 E Cancel OK Cancel OK How to view route waypoint information Route Route INFO [Waypoints]. How to delete a route PLAN Manage Data Route Check route(s) to delete. Delete 6
User Charts How to create a user chart User Chart Plan -ning PLAN New Right click to open options How to draw a line Tidal: - Current - Predicted Area Line: - Coast - Route - NAV - Depth Tidal: - NMT - NLT Label (1) (4) Right-click; select [Finish]. Drag cursor; double-click. object to draw. Enter name Save as OK 7 How to draw an area (1) (3) (2) Circle How to draw a circle (2) (3) Right-click; select [Finish].
User Charts(con t) How to select objects to display in user chart DISP How to link a user chart to a route Symbol DISP SET PLAN Plan -ning Route Selected. [Select.] Select [Mariner] tab. RouteAAAAAA [User Chart] tab. Check an item. Select a user chart. How to delete objects from a user chart Point on a line Point, symbol, tidal or circle Edit Delete Edit DeletePoint Select [DeletePoint]. Select [Delete]. Right- click Right- click the point to delete. How to delete user charts PLAN Manage Data User Chart Delete Check chart(s) to delete. 8
Chart Operations How to control visibility of chart objects Basic Setting Control basic chart settings DISP SET Chart DISP Control chart objects Symbol DISP Control navigational features 9
Chart Operations How to set safety contours and chart alerts How to set Display date and Approved until dates DISP SET Chart Alert Chart INFO Viewing Dates Approve All to put checkmark; red ( ): Highlight+Warning yellow ( ): Caution Set safety depths here. How to find chart object information (ENC chart) Ship off center Object INFO Manual Update Select [Object INFO.] Select an object. OK Right-click How to manually insert a new chart object Select object from Drawing type. NAVI Manual Updates Select [Planning]. Add Commit object to add. 10
TT/AIS Operations How to find target info Put the cursor on the target and push the left button to show target data. Title bar TT No. Bearing Range Course over ground Speed over ground CPA TCPA Bow cross range Bow cross time **.** **.** TT symbols (main) Symbol (Color) (Green) (Green) (Green) Name Past position marker Target under acquisition Acquired target Title bar MMSI Bearing Range Course over ground Speed over ground CPA TCPA Bow cross range Bow cross time Position Scroll buttons Heading Rate of turn Navigation status AIS symbols (main) Symbol Name (Color) Past position marker (Green) Sleeping AIS target (Green) Activated AIS (Green) target How to set up TT and AIS on the TT/AIS page in Overlay/NAV Tools box Show, hide AIS display. Vector Show, hide TT display. Set vector time. Select vector reference. (ex. TT) Set CPA/TCPA alarm. Set lost target alarm. Set conditions for automatic activation of AIS targets whose CPA is within CPA/TCPA setting. (ex. AIS) Select reference for past position display. Show, hide position display. 11
TT/AIS Operations (con t) Radar Overlay Activate, deactivate the radar overlay. Filter AIS targets by target category. Filter AIS targets by range and speed, length. Sleep all activated AIS targets. Adjust the gain of the radar receiver. Put the cursor on the bar then roll the scrollwheel. Set the degree of transparency for the overlay. Set the item to display when a chart object and a radar echo share the same position. Set conditions to activate an AIS target when its CPA is within the CPA alarm setting. Select the antenna to feed the overlay. Radar echo Set the conditions for the AIS lost target filter. Set the conditions for the TT lost target filter. 12 PUB. NO. OSE-44730-A (1204, DAMI) FMD-3200/3200-BB/3300