How to change access rights? With an intelligent cylinder!

How to change access rights? With an intelligent cylinder!

CodeLoxx Dual-Knob Cylinder External knob dimensions - diameter: 30 mm - length: 35 mm Internal knob dimensions: - diameter: 33 mm - length: 45 mm Material: Door knobs in solid stainless steel - lithium battery, 100,000 actuations - emergency power supply possible Memory: 511 access authorisations, expandable Areas of application: - doors with standard Euro profile cylinders - panic locks, approved for freely rotating locking cam - multiple locking mechanisms External operating conditions: -20 to + 70 C / IP 44 Internal operating conditions: -10 to + 65 C / IP 44 Special options: - clock / calendar function - logging memory for up to 1,000 events - 30 week profiles, 6 year profiles - office function: time-controlled permanent access - radio link to EMA with 3 metre range - reader on inside External power unit PELT CodeLoxx equipped wiht key reader ELECTRONICS REPLACE MECHANICS CodeLoxx is an electronic dual-knob cylinder with chip key reader. It can be used in all commercially available profile cylinder locks. The external door knob turns freely and is engaged for a defined period of time when a valid chip key is inserted; during this time the door can be unlocked and opened or locked by turning the knob. The internal knob is always engaged so that the door can be opened or locked from the inside without having to insert the key. If required, the external knob can be set for the lock to be continuously unlocked by using the permanently open function. TAMPERPROOF CodeLoxx is protected against physical attack or sabotage. Armoured protective elements in the cylinder body offer a high level of resistance to drilling. The external door knob merely contains the chip key reader. The sensitive components, such as the main electronics and the mechanical elements, are protected inside the internal knob. The electronics have also been designed to ensure maximum security. Data transmission between chip key and main electronics is effected by encrypted dialogue. Both the external and the internal door knob are encapsulated to provide water spray protection. Illustration EASY PROGRAMMING In small-scale locking systems, CodeLoxx is programmed using one of the keys that the user has designated as the programming key. This programming key is used to validate new chip keys or invalidate existing ones. Large-scale locking systems are managed via the SECCOR Key Manager. CodeLoxx equipped with proximity reader NON-CONTACT TRANSPONDERS As an alternative to the chip key, CodeLoxx is also available with proximity readers for the non-contact reading of cards or tags. This has the advantage that any existing transponders can be used as locking media, while retaining all the options of flexible locking plan management that the chip key offers. AUTONOMY THANKS TO BATTERY CodeLoxx is powered by a commercial lithium battery. Effective energy management ensures that up to 100,000 actuations can be effected with one battery. An automatic warning function monitors the battery voltage and signals the need for battery replacement in good time. Operation of the dual-knob cylinder can subsequently be easily restored using the external power input from the PELT unit. 2

CodeLoxx Modular Principle Extension kid 5 mm CodeLoxx, side face VERLÄNGERUNGSSÄTZE: Extension kid 10 mm DOOR THICKNESS ADJUSTMENT Extension kids: Doors vary in thickness. CodeLoxx is the Extension kids are available up to a maximum door thickness of 90 mm. first electronic dual-knob cylinder that is composed of separate modular components and can be adjusted to common door thicknesses on site. Extension kid 15 mm Doors with a thickness higher than 90 mm can be ordered by specifying the door dimensions. SECCOR supplies cylinder modules, which can be assembled in 5 mm increments to provide the desired overall length. For the specialist security retailer, this means a distinct advantage in terms of inventory keeping and enables them to Extension kid 20 mm supply individually matched cylinder bodies at short notice. End users can adapt CodeLoxx easily to new door specifications after a move. Center body CodeLoxx Remote relay contact 3 m radio link Remote unit EXTERNAL ACTIVATION BY RADIO The advantage over a door opener: SIGNAL CodeLoxx will also lock and unlock the CodeLoxx is ideally suited for integration door. No additional wiring required. using the remote interface. A simple relay contact is all that is required for the external encrypted control of CodeLoxx via a 3 metre radio link. 3 Suitable for 55 mm flush-type box Input voltage: 8-24 V DC CodeLoxx L-E for external activation into an existing access control system, Dimensions: Analogue outputs: 1 x signal relay as changeover contact Wireless connection: ISM band, 868 MHz, 3 metres

Electronic Cylinder ZL BATTERY USE External dimensions The battery guarantees perfect operation - height with knob: 41 mm for up to 60,000 actuations. A commercial - width: 32 mm lithium battery is used for the purpose. An Internal dimensions: automatic warning function monitors the - height with knob: 47,5 mm battery voltage and signals the need for - width: 38 mm battery replacement in good time. Material: cink diecasting ARMOURING - YOUR CHOICE The SECCOR ZL is available in two versions: for interior areas without anti- - lithium battery, 60,000 actuations tampering protection and for external areas with hardened protective elements in the - emergency power supply possible Memory: 511 access authorisations, expandable Areas of application: Electronic cylinder ZL installed on a door The electronic cylinder ZL is suitable particularly for fitting into panic locks. - doors with standard Euro profile cylinders RELIABILITY - panic locks Size matters. For best use of space, both External operating conditions: electronic and mechanical components are -20 to + 70 C / IP 44 fitted into an internal rosette. cylinder adapter. In either case, the security-relevant components such as the electronics and the locking mechanism are on the inside of the door. SIMPLE TO INSTALL The SECCOR ZL is installed without drilling. It can be adapted to virtually all doors and locks, including panic locks and Internal operating conditions: doors with a multiple locking system. Do -10 to + 65 C / not condensing your doors have a round rosette? No problem! The SECCOR ZL is available with an appropriate face plate. Electronic Cabinet Lock LEIS The electronic cabinet lock from SECCOR is ideal for single door cabinets and lockers. It can be operated either with a SECCOR chip key or with a non-contact transponder. When the correct key is inserted, the locking pin is withdrawn by a motorized mechanism, thus allowing the door to be opened. Programming is performed either via a programming key or via the locking plan Cabinet lock administration software 'SECCOR Key Manager'. Key reader 4

Electronical Fitting with Keypad THE MODERN "OPEN SESAME All thanks to the programming key. Simply Simply enter your personal code on the insert it, enter your desired code and that's External dimensions: keypad (you can choose between 4 and 8 it! It couldn't be simpler. - width: 58 mm digits) and you are inside your house, your - length: 275 mm flat or your company with the touch of a Internal dimensions: finger. You can change the code at any - width: 62 mm time and you don't need any specialist - length: 275 mm technical knowledge. Material: cink diecasting - lithium battery, 40,000 actuations - emergency power supply possible Keypad ELEGANT DESIGN Of course, the SECCOR security fittings are available with a variety of finishes: Memory: 511 access authorisations, expandable Areas of application: brass, antique brass, stainless steel, matt - doors with standard Euro profile cylinders nickel-plated or white. Simply choose the - multiple locking mechanisms colour to match your door. External operating conditions: -20 to + 70 C / IP 44 Internal operating conditions: -10 to + 65 C / not condensing Electronical fitting SLT Special options: But SECCOR offers you a great deal - clock / calendar function more: You can store several access - logging memory for up to 1,000 events authorisations at the same time, e.g. one for each member of the family, or for friends Finishes and neighbours. As many and for as long as you want, the possibilities are almost EASY TO INSTALL infinite... how about that for convenience? The fittings can be installed quickly and LEISTUNGSMERKMALE: AS SECURE AS THE BANK OF ENGLAND All security-related components are located on the inside of the door protected from the outside by a hardenedsteel armoured plate. Burglars don't stand a chance. easily you can even do it yourself since SECCOR security fittings fit virtually any door or lock even doors with multiple locking. The incorporated battery means that no door wiring is required. After all, your door should remain as it is. ALL THIS THANKS TO THE BATTERY A commercially available lithium battery PROGRAMMING IS CHILD'S PLAY You can program a new code or change or delete an old one in a matter of only ten seconds. 5 ensures smooth operation. For up to 10 years! The incorporated battery monitor indicates when you need to change the battery in plenty of time. - 30 week profiles, 6 year profiles - office function: time-controlled permanent access - radio link to EMA with 3 metre range - reader on inside

Access Control INPUT UNITS In addition, readers are available for Input unit EL: SECCOR input units are supplied with a MIFARE, Proximity or HITAG1. - dimensions: 56 x 95 x 23 mm (WxLxH) base plate for wall mounting. In - material: zinc die-casting conjunction with a SECCOR control unit - finish: stainless steel SG, you can control electronic door - reader: chip key openers, motorized locks, lifts, barriers or - option: MIFARE/Proximity/HITAG1 garage door openers. ELT/EL equipped with MIFARE-/ Proximity/HITAG1-reader Input unit ELT: - dimensions: 58 x 175 x 30 mm (WxLxH) - material: zinc die-casting CONTROL UNIT SG - finish: stainless steel, titanized brasscoloured, matt chrome-plated The separate control unit SG is mounted in Input Unit EL - reader: chip key the interior. This guarantees protection against sabotage and the effects of the - keypad to enter access codes weather. - option: MIFARE/Proximity/HITAG1 Input unit ELT Control unit SG: VERSIONS - control of electrical switching functions The input units are equipped either with a - option: with logging of last 1,000 events key reader or with key reader and keypad - relay as normally closed or normally open contact for entering access codes. The control unit performs the analysis of the chip key data or codes and provides storage of access event data as an option. - switching period set via potentiometer - plastic housing: 114 x 50 x 25 mm - power supply: 9-24 V DC Control unit SG Locking Media Thanks to the encryption-based dialogue Chip key: process and the fact that the chip key has - colour: black been approved by the VdS (German - contacts: robust stainless steel contacts testing institution for fire protection and - identification: unique identifier LEISTUNGSMERKMALE: Chip-Key - protection: read and copy protected - certificate: VdS-tested - reversible key principle MIFARE/Proximity/HITAG1: - type: card or key fob - colour: printed to customer requirement - identification: unique identifier MIFARE- /Proximity- / Hitag1- Transponder security), the chip key is also a popular method of arming burglar alarm systems. CHIP KEY NON-CONTACT TRANSPONDERS The SECCOR chip key is a robust, very The passive transponder types Proximity, reliable locking medium. MIFARE and HITAG1 are standard It is inserted into the key reader making commercial media in the form of cards or physical contact. It is compatible with the key fobs. They are used extensively in entire SECCOR product portfolio and can business premises, for instance for time be validated for a number of different monitoring or access control, and they are locking systems. supported by the SECCOR locking systems. 6

Locking Plan Software SIMPLE TO MANAGE The SECCOR Key Manager organises the assignment of access rights and alarm arming authorisations to personal details. Any number of locking plans can be created. Each locking plan can store up to 64,000 doors and 64,000 users. And each locking plan can further be protected with a freely selectable password. You can manage up to 6 different locking day profiles and up to 30 different week profiles per locking plan. You can maintain up to 2 release periods per day in each week profile. SIMPLE TO OPERATE The SECCOR Key Manager offers intuitive and ergonomic user guidance. Access rights are assigned to individual users via drag & drop. All important functions, such as Create new locking plan, Open locking plan, Create new user or Create new door are identified by clear symbols and permanently displayed in the user interface. ACCESS EVENT ANALYSIS The logging function allows the last 1,000 events of each locking system to be analysed. To comply with data protection legislation, the logging function can be protected with a separate password. PRINT FUNCTION There are various print options available to fulfil all requirements, whether you wish to print out the access rights per user or the users per locking system. A signature list, in which each user confirms receipt of the locking medium, rounds off the print functionality. DATA TRANSMISSION The transfer device serves for the data transmission between management PC and locking systems. It is also required to load the locking media data into the SECCOR Key Manager. System requirements for software: - Intel Pentium III processor with 500 MHz clock speed - 128 MB working memory - 200 MB available hard disk space - MS Windows 2000 SP6a, XP SP2, Vista, Windows 7 - Java Runtime Environment Version: 1.6 - transmission device 3.3 or higher Summer/winter time: The changeover between summer and winter time can be set 18 months in advance Transmission device: - chip key reader - realtime clock - lithium battery set CR P2 - adapter cable for RS232 interface - option: USB to RS232 adapter - adapter cable for locking systems - dimensions: 115 x 72 x 32 mm ALARM ARMING AUTHORISATIONS The SECCOR Key Manager can manage doors as well as security areas. Via a consistent user interface, access authorisations as well as alarm arming authorisations can thus be assigned and withdrawn as and when required. SETS OF DOORS To simplify management, the individual doors are combined to form sets of doors. Consequently, even large locking installations can be changed and adapted to current requirements with a few clicks of a mouse. Transmission device 7