FS0 High Accuracy Fibreoptic Functions From ultra-high precision to ultra-high power: A single unit covers every application The FS-V Series offers three levels of detection to suit the application. Model: FU- 0 mm Mode 00 mm Mode 00 mm Mode The FS-V Series can be used for high-precision detection of wire as thin as 0.0 mm in diameter with a thrubeam type fibre unit. It can also be used for detection in harsh environments where oil or dust eists. Because the FS-V Series can work in almost all applications, sensor selection is easy. Detection with ultra-high precision Detection under harsh environment Readable digital display of moving target: Peak/bottom hold display The digital LED monitor can hold the displayed value. The light intensity value of a moving target can be frozen to control the numerical values easily. The received light intensity At a glance digital LED monitors interrupted light The digital LED monitor displays the light quantity at the light-receiving element incrementally from 0 to 09. This enables you to determine the degree of dust accumulation on the sensor and the deviation in the optical ais. In addition, checking the change in the light quantity with the digital reading ensures an optimal setting value, improving the detection reliability. Small target Received light quantity: Large Large target Received light quantity: Small FU- Area detection fibre unit
FS0 High Accuracy Fibreoptic ToughFle Fibre Principle Keyence has developed the toughest fibre unit series by bundling multiple s of µm diameter. These fibres will work normally without any malfunction even when they are bent to a minimum radius or when they are hit or pulled suddenly. Keyence has also maintained a long detecting distance while using this unique design. Including focused small spot model, area detection model, ultra-long detecting distance model, and thin sleeve models, every application can be improved with maintenance efficiency. Plus, the latest armoured model is sheathed by a fleible jacket to protect the fibre from daily wear and eposure to harsh environmental conditions. Conventional fibre ToughFle will not break even when sharply bent. More fleible than conventional spiral fibres. ToughFle will not break even when sharply bent. FU-7G/77G Fibre A standard fibre will easily break. ToughFle fibre A single- eposed to ecessive bending will easily break. ToughFle will not break even when sharply bent. The 7- is hardly affected by ecessive bending. ToughFle Fibre Features Tough even when entangled Even if the fibre unit becomes entangled, the fibre unit and the base of the head will continue to perform. Shock-resistant The fibre unit and the base of the head will continue to perform even when dropped or struck by a tool. Ready for immediate use Armoured ToughFle provides a cost and labour savings by eliminating the need for protective tubing. More fleible than conventional spiral fibres ToughFle fibre variations FU-7G FU-77G FU-7 FU-77 FU-Z FU-Z FU-FZ FU- M, reflective with armoured tube, thrubeam with armoured tube M, reflective, thrubeam, reflective, reflective with sleeve M, reflective Thrubeam Area detection 0
High Accuracy Fibreoptic FS0 Fibre Unit Selection Guide (major models only) Break-free ToughFle Fibres [Patent pending]: FU-7/77/FZ/FZ/FZ/Z/Z/ Fibres with a minimum bend radius of mm retain light intensity even when folded. These innovative fibres can be routed just like an electric wire, enabling installation anywhere. Compact Definite Reflective Fibres: FU-/V/R These fibres are ecellent for detection in tight spaces such as being embedded in a robot arm or on a conveyor. Detection is almost unaffected by target backgrounds. Wafer Mapping Fibre: FU- The FU- incorporates a special lens and prism and has an aperture angle of enabling ultra-narrow beam emission. This capability is well suited to mapping (positioning) wafers placed at a small pitch. Liquid Level Detection Fibre: FU-9 The FU-9 is totally encased in a Teflon -sheath. It is liquid resistant and can be used to reliably detect a liquid surface level. Tube-mountable Liquid Level Detection Fibre: FU-9 The FU-9 is a liquid-level-detection fibre that can be easily mounted to a tube. Because it is lightweight it can be mounted in anywhere. High-fle Fibres: FU-//9/9///9/7/79 These fibres, which provide higher fleibility than an electric wire, can endure repeated bends. The bend radius of mm makes fibre routing easier and saves mounting space. Area Detection Fibre: FU- The FU-, which provides a detecting area mm wide, is suitable for detecting vibrating targets or minute targets. A target as small as. mm in diameter can be accurately detected. Long Detecting Distance, Side-view Fibre: FU- The FU- provides a long detecting distance of.7 m and an aperture angle of, enabling narrow beam emission. Almost no light reflected by surrounding objects enters the receiver, enabling stable detection. Focused Beam Lens and Fibre: FU- + F-HA The FU- with the F-HA forms a tiny beam spot 0. mm in diameter at a detecting distance of 7 mm. This combination is very useful for detecting minute targets or positioning with high accuracy. Narrow-beam Fibre: FU- The light diffusion angle is (/ of conventional models), allowing narrow beam emission. This capability is ideal for detecting minute targets. Safety Light Curtains Proimity Pressure Programmable Logic Controllers Counters, Control Units High Precision Vision Systems Bar Code Readers Displacement Thrubeam Measuring Instruments Analog Sensor Controllers Video Microscope Technical Guide 7 9
FS0 High Accuracy Fibreoptic Fibre Unit Selection Chart Type Shape Detecting distance. Smallest. Minimum (mm) detectable bend Features object radius mm dia. 0 0 70 (00) Lens F-, F-, F- ø0.0 mm R mm distance Weight Model (Appro.) FU-F 9g FU-7F g 0 70 00 Lens F-, F-, F- ø0.0 mm R mm A minimum bend radius of mm 9g FU-7 ToughFle mm dia. 0 0 70 (000) Lens F-, F-, F- ø0.0 mm R mm R mm Break-free fibre Armoured ToughFle fibre 9g g 9g FU-FZ FU-77 FU-77G NEW Thrubeam High-fle Thin-sleeve Side-view Area detection. mm dia. M M 0. mm dia.. mm dia. Min. bend radius of sleeve: mm. mm dia. mm dia. Min. bend radius of sleeve: mm mm dia. mm dia. 0. mm dia.. mm dia.. mm dia. mm dia. Min. bend radius of sleeve: mm 0 0 0 7 0 0 0 0 0 00 0 00 00 0 00 0 00 0 00 0 70 700 00 00 00 00 00 ø0.0 mm ø0.0 mm ø0.0 mm ø0. mm ø0. mm ø0.0 mm ø0.0 mm ø. mm ø0. mm. R mm R mm R mm R mm R mm R mm High-fle fibre Thin sleeve distance with sleeve Narrow-beam type with built-in micro lens distance side-view type Wafer-mapping type Side-view type with thin sleeve Space-saving, side-view type Area detection fibre with a detecting width of mm g g g g g g g g 7g g FU- FU-9 FU-79 FU-7F FU-7 FU- FU- FU- FU- FU- Diffuse-reflective mm dia. M 0 00 00 ø0.0 mm R mm distance g g g FU-F FU-F FU- is for FS-V// only. For FS-V and FS-T, see.. Detecting range varies depending on detecting distance and target diameter. Refer to "Characteristics". Detecting distance for reflective sensors were obtained using a white paper target (standard target).. The smallest detectable object was determined at the optimal detecting distance and sensitivity setting.. Smallest detectable object is ø. mm in mode and ø0. mm in mode.
High Accuracy Fibreoptic FS0 Diffuse-reflective Type Shape Detecting distance. (mm) Smallest. Minimum detectable bend object radius Features mm dia. 00 00 0 Suitable for M 0 positioning 0 Coaial 0 ø0.0 mm M R mm 0 ToughFle High-fle Thin-sleeve Side-view M. mm dia.. mm dia. mm dia. M M mm dia.. mm dia..77 mm dia.. mm dia. 0. mm dia. mm dia. 0. mm dia. M M. mm dia. Min. bend radius of sleeve: mm M mm dia.. mm dia. Min. bend radius of sleeve: mm Min. bend radius of sleeve: mm. mm dia.. mm dia. Min. bend radius of sleeve: mm. mm dia..0 mm dia. 70 0 0 0 70 0 0 0 0 0 7 0 0 0 0 0 Lens F-HA Lens F-, F-, F- Lens F-HA, F-HA, F-HA ø0.0 mm ø0.0 mm ø0.0 mm ø0.0 mm ø0.0 mm ø0.0 mm (copper wire) R mm R mm R mm R mm R mm R mm High-fle fibre Narrow-beam type for small-beam spot Flush-mount type with thin-sleeve Screw-mount type with thin-sleeve Flush-mount type with sleeve Screw-mount type Long-sleeve, Flat type Long-sleeve Compact is for FS-V// only. For FS-V and FS-T, see.. Detecting distance for reflective sensors were obtained using a white paper target (standard target).. The smallest detectable object was determined at the optimal detecting distance and sensitivity setting. R mm R mm R mm 0. mm spot diameter when used with F-HA 0. mm spot diameter when used with F-HA Break-free fibre Armoored ToughFle fibre Coaial fibre with 0. mm spot diameter when used with F-HA Thin sleeve break-free fibre Weight (Appro.) g g g g g g g 9g g g 7g g g g g g g g g g g g Model FU- FU- FU- FU- FU-FZ FU-Z FU-FA FU-FZ FU-Z FU-7 FU-7G NEW FU- FU- FU-9 FU-9 FU- FU- FU- FU- FU- FU-T FU- Safety Light Curtains Proimity Pressure Programmable Logic Controllers Counters, Control Units High Precision Vision Systems Bar Code Readers Displacement Thrubeam Measuring Instruments Analog Sensor Controllers Video Microscope Technical Guide 7 9
High Accuracy Fibreoptic FS0 Selection Chart Lens attachment Thrubeam Diffuse-reflective Specifications Fibre unit Type Ambient temperature Material Type Applicable Detecting distance (mm) Configuration Feature Model fibre units FU-7F, 00 00 00 Side-view distance Ultra-long detecting distance Focusing lens distance, focusing lens distance, high focusing lens - 0 to +70 C (FU-, 7, 77: - 0 to +0 C, FU-9: - 0 to +0 C) Fibre: Plastic, Sheath: Polyethylene (FU-9: glass) FU-77, 77G FU-7 FU-C FU-7F, FU-77, 77G FU-7 FU-C FU-7F FU-77, 77G FU-7 FU-FA(Z) FU- FU-FA(Z) FU-FA(Z) 0 0 0 00 00 00 00 000 00. When using the F- at a temperature of 70 C or more, specify the "Heat-resistant F-".. "00" is assumed as maimum because the fibre cable has the length of m. H eat-resistant Oil proof, Chemical proof 0 C type 00 C type 0 C type C type - 0 to +0 C. - 0 to +0 0 C. - 0 to + 0 C. Fibre: Glass, Sheath: Stainless-steel spiral tube Fibre: Plastic, Sheath: Fluorocarbon polymer coating 0 to + - C - 0 to +70 C Fibre: Plastic, Sheath: Polypropylene Fibre: Plastic, heath: Teflon S. Ambient temperature varies depending on the distance from the tip or a fibre unit. Refer to "Dimensions". The ambient temperature for the FU-7 and is in dry condition. 0 0 0 00 000 00 000 00. 00. 70 0 0 00. 00 000 00 00. 00. 000 00. 00. 7 ± with beam spot diameter of 0. mm 7 ± with beam spot diameter of 0. mm 0 to 0 with beam spot diameter of mm ± with beam spot diameter of 0. mm Space-saving, side-view type Greatly increases the detecting distance., Aperture angle: Greatly increases the detecting distance. Aperture angle: Focuses light beam for precise aiming. Improves the stability for the minute target detection. Model F-. F- NEW F- F-HA F-HA NEW F-HA Safety Light Curtains Proimity Pressure Programmable Logic Controllers Counters, Control Units High Precision Vision Systems Bar Code Readers Displacement Thrubeam Measuring Instruments Analog Sensor Controllers Video Microscope Technical Guide 7 9
FS0 High Accuracy Fibreoptic Fibre Unit Selection Chart Detecting distance using FS-TG/FS-MH Fibre unit Thrubeam Diffuse-reflective Type Shape Detecting distance. Weight (mm) Model (Appro.) ToughFle High-fle Sleeve Side-view Area detection Heatresistant ToughFle Coaial High-fle Sleeve mm dia. mm dia.. mm dia.. mm dia. M Min. bend radius of sleeve: mm 0. mm dia.. mm dia. mm dia. M. mm dia. M M. mm dia. M. mm dia. Min. bend radius of sleeve: mm. mm dia. mm dia. 90 0 0 0 0 0 90 0 0 0 00 00 0 0 7 0 90 0 0 0 0 0 0 7 9g g 9g g g g g g g g g g g g g g g g g g g FU-F FU-7F FU-FZ FU-77,77G FU-9 FU-79 FU-C FU-F FU-F FU-Z FU-7, 7G FU-7 FU- FU- FU- FU-FA FU-9 FU-9 FU- FU- FU-T m m Heatresistant 0 0 0 0 0 g g FU-C FU- When using the FS-MH ( mode) When using the FS-MH ( mode).detecting range varies depending on detecting distance and target diameter. Refer to "Characteristics". Detecting distance for reflective sensors were obtained using a white paper target (standard target). When using the FS-TG
FS0 High Accuracy Fibreoptic Self-diagnostic Function When the received light quantity eceeds the detection level but does not eceed the stable operation level times continuously or for seconds continuously, the stability output is activated. Reset: When the stability output is activated, clean the front surface of the fibre unit or realign the optical ais so that the stable operation indicator (green LED) lights again. The stability output is reset when detection is done with the stable operation indicator (green LED) turned on. Characteristics Receiver ecess gain vs. detecting distance (Typical) Operation chart Stable operation level Detection level Stability output [Note] The received light quantity does not eceed the stable operation level times continuously. The received light quantity does not eceed the stable operation level seconds continuously. seconds When several units are connected, the stability outputs of all the units are output from the main unit based on OR logic. FS-T/V detecting distance is the same as that for mode. FS-V/T+FU-F, 7F,7, FS-V/T+FU-7F, +F- FS-V/T+FU-7F, +F-* 00 00 00 0 0 0 0. 0 0 00 00 00 00 00 700 00 900 0. 0 00 00 00 00 00 00 00 00 0. 0 00 000 000 000 000 *Data was obtained using a -m type fiber unit. FS-V/T+FU-9, 79 FS-V/T+FU-FZ, 77 FS-V/T+FU-7F 00 00 00 0 0 0 0. 0 0 0 0 00 0 00 0. 0 0 00 00 00 00 00 700 0. 0 0 0 0 00 0 FS-V/T+FU-F, F,, 00 FS-V/T+FU-9, 9 00 FS-V/T+FU- 00 0 Operating level White mat paper 0. 0 0 00 00 00 00 0 White mat paper 0. 0 0 0 0 0 0 70 0 White mat paper 0. 0 7
FS0 High Accuracy Fibreoptic FS-M ()/ FU-9,79 00 0 FS-M ()/ FU-F, F,, 0 White mat paper FS-M ()/ FU-9,9 0 White mat paper 0 0 0 0 00 0 00 0 0 0 0 00 0 00 Operating distance vs. detecting distance (Typical) 0 0 0 0 0 Parallel displacement of optical ais (Typical) FS-M ()/ FU-F, F,, 0 90 0 0 0 0 0 90 Y Target: 0 0 white mat paper 0 7 0 0 7 Distance (mm) FS-M ()/ FU-9, 9 Y Target: 0 0 white mat paper 0 0 Distance (mm) FS-M ()/ FU-7F, +F- 00 00 Y 00 0 0 0 00 00 00 00 00 000 00 000 00 Distance (mm) 0 Hysteresis (Typical) 00 FS-M ()/ FU-9, 79 0 0 Y 0 0 0 0 0 7 0 0 7 Distance (mm) Hysteresis (mm) FS-M ()/ FU-F, F,, Detecting distance Hysteresis ON OFF Target: 0 0 White mat paper Hysteresis (mm) FS-M ()/ FU-F, F,, Detecting distance Hysteresis ON OFF Target: 0 0 White mat paper 0 0 0 0 0 0 0 0 0 0 0 0 0 00 Target diameter vs. detecting area (Typical) Distance (mm) Number of trimmer turns vs. detecting distance (Typical) Distance (mm) Detecting area (mm) FS-M ()/ FU- ø. (when using slit A) ø. (without slit) ø0. (when using slit A) ø0. ø0. (without slit) (when using slit A) ø0. ø0. (without slit) (when using slit B) Detecting area Diameter FS-M ()/ FU-F, F,, 0 0 0 0 0 White mat paper FS-M ()/ FU-F, F,, 00 7 0 White mat paper 0 7 0 0 0 00 00 00 00 0 7 9 0 7 9 Distance (mm) Number of trimmer turns Number of trimmer turns 7
High Accuracy Fibreoptic FS0 Dimensions Thrubeam type FU-F/FZ FU-7F FU-. 0 FU- FU- ø.0 (ø.) () ø.0 ø.0 ø. M. P0. Across-flats: 7, t= P0.7 ø. 000 000..9 0. 000.. 7 7 (Centre of optical ais) ø., ø. spot-facing mounting hole ø. ø Stainless steel ø. (Core fibre) ø Stainless steel ø. (Core fibre) ø 000 ø 000 ( ) shows FU-FZ. FU-. ø0. FU- FU- FU-9 FU-7 0. FU-7F 0.. ø0. (Beam dia.) ø. ø. ø0. Across-flat:., t= M P0. ø.0 00 ø. ø.0 ø. Bendable area 90 ø.0 lens ø. ø.0 *Area for mounting ø0. ø.0 Bendable area * 00 00 ø. ø. Bendable area ø0. * ø.0 ø ø. Across-flats: 7, t= P0.7 ø. 000 * Do not bend this area. 00 Unit: mm Safety Light Curtains Proimity Pressure Programmable Logic Controllers Counters, Control Units High Precision Vision Systems Bar Code Readers Displacement Thrubeam Measuring Instruments Analog Sensor Controllers Video Microscope Technical Guide 7 9 77
High Accuracy Fibreoptic FS0 FU- ø. ø0. 9 ø0. FU- FU- FU- FU- ø.0 ø0. ø.0 ø ø0.. ø0. Across-flats:, t= M P0.7 000 0. ø0. ø0. ø0. FU-FA/FZ ø. ø.77 7 ø ø. ø 000. ø. ø. ø. ø. Bendable area 00 () FU-FA(FZ)+F-HA FU-FA(FZ)+F-HA FU- FU- ø. (9) 9. (9) Across-flats:., t= M P0. ø. ø 00 ( ) shows FU-FZ. 0* *Do not bend this area. ø0. ø. 00 ø. ø.0 00 ( ) shows FU-FZ. ( ) shows FU-FZ. ø ø.0 * 00 *Do not bend this area. ø. ø ø. 000 FU- FU-9 - ø0. ø0. FU-T ø 000 ø. 00 Bendable area ø0. ø. ø. FU-/Z ø0.(ø0.) ø.(ø.) FU- Bendable area 9. ø.(ø.0) ø. ø0. Across-flats:., t= M P0. FU-/Z FU-7 ø.0 ( ø.) ø0. * 00 *Do not bend this area. ø. 000 ø. FU-7G ø. ø Across-flats: 7, t= P0.7 Across-flats:, t= M P0.7 Across-flats :, t=, M P0.7 00 000 ø.0 ø.0 000 Unit: mm t=, 000 ø. Across-flats: 7, t= P0.7 ø. ( ) shows FU-Z. ø. ø.0 ( ) shows FU-Z. ø. ø. Stainless steel Safety Light Curtains Proimity Pressure Programmable Logic Controllers Counters, Control Units High Precision Vision Systems Bar Code Readers Displacement Thrubeam Measuring Instruments Analog Sensor Controllers Video Microscope Technical Guide 7 9 79