EZR Parts Manual Zero Turn Mower Models 0-EZR 0-EZR 0 0-EZR 0-EZR 0-EZR 000C /0 Supercedes 000, A,B Printed in USA
THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an understanding of safety instructions and controls during normal operation and maintenance. For your safety and the safety of others always read, understand, and follow all DANGER, WARNING, and CAUTION messages found in manuals and on safety decals. Hardware descriptions are given in decimals. Decimals to Fractions.0 /. /. /. /. /. /.0 /.0 /. /. /. /. /. /. /.00 /.00 SERVICE AND REPLACEMENT PARTS When ordering replacement parts or making service inquiries, know the Model and Serial numbers of your unit and engine. Numbers are located on the product registration card in the unit literature package. They are printed on a serial number label, located on the frame of your unit. Record Unit Model and Serial numbers here: PRODUCT REGISTRATION A warranty registration card must be filled out, signed, and returned at time of purchase. This card activates the warranty. Claims meeting requirements during limited warranty period will be honored. YOUR SATISFACTION IS IMPORTANT Questions? Please follow these helpful steps:. Refer to the manuals supplied with your unit. They will guide you through safe and proper operation and maintenance. They contain specifications on your unit. If your questions are not answered in these manuals, go to step number two.. Contact Your Dealer. Our dealers will be happy to supply any service or advice required to keep your unit operating at peak efficiency. A factory trained staff is available to support your equipment needs. They stock genuine Ariens parts and lubricants manufactured with the same precision and skill as the original. If your questions are not resolved by the support staff, ask for the manager or owner. When contacting your Dealer supply your model and serial numbers. TO SPEED PARTS ORDERING:. Know the model and serial numbers of your unit.. Know the part number required.. Know the quantity required.. Know the part description. Record Engine Model and Serial numbers here: UNAUTHORIZED REPLACEMENT PARTS Use only Ariens replacement parts. The replacement of any part on this vehicle with anything other than an Ariens authorized replacement part may adversely affect the performance, durability, or safety of this unit and may void the warranty. Ariens disclaims liability for any claims or damages, whether warranty, property damage, personal injury or death arising out of the use of unauthorized replacement parts.
MODELS Model 0 (EZR ).0 HP Briggs & Stratton with " Mower Serial No. 000 and up Model 0 (EZR 0) 0.0 HP Briggs & Stratton with " Mower Serial No. 000 and up Model 0 (EZR ).0 HP Briggs & Stratton with " Mower Serial No. 0000 and up Model 0 (EZR ).0 HP Briggs & Stratton with " Mower Serial No. 0000 and up Model 0 (EZR ).0 HP Briggs & Stratton with " Mower Serial No. 000 and up TABLE OF CONTENTS DECALS Decals.................................... POWER PLANT Clutch Shaft-Hydro........................... Parking Brake and Dump Valves................ HydroStatic Transaxle-Right.................... HydroStatic Transaxle-Left.................... 0 Transaxles and Wheels...................... Engine, Exhaust and Belts.................... Idlers.................................... MAIN FRAME Frame................................... Seat and Support........................... Fuel Tank................................. Front Axle................................. 0 Bumpers.................................. Cover Assembly, Solenoid and Switches......... OPERATOR CONTROLS Controls.................................. Attachment Lift............................. Hanger Arm ( Deck Only).................. ELECTRICAL SYSTEM Continuity Diagrams......................... Wiring Diagrams............................ MOWER DECKS Mower Deck........................... 0 Mower Brackets and Rollers............... Mower Spindle.......................... Mower Spindle.......................... Mower Pan............................. Copyright 00 Ariens Company
000D 00 000D 0000 DECALS-SAFETY Model 0, 0, 0, 0, 0 0 WARNING/AVERTISSEMENT/ADVERTENCIA FOR SAFE DECK REMOVAL/POUR UNE DÉPOSE DU CARTER DE COUPE EN TOUTE SÉCURITÉ /PARA LA EXTRACCION SEGURA DE LA PLATAFORMA / (mm) DANGER/ PELIGRO After proper belt installation:. Marks must align as shown.. Distance must be / (mm) and you must be able to rotate outer spacer with thumb and forefinger.. These three nuts must be tightened. Après la pose correcte de la courroie :. Les repères doivent être alignées (voir schéma).. La distance doit être de mm (/ in.) et il doit être possible de tourner l'entretoise externe avec le pouce et l'index.. Ces trois écrous doivent être serrés. Después de la instalación adecuada de la correa:. Las marcas deben alinearse como se muestra.. La distancia debe ser de mm (/ pulg.) y be de ser capaz de rotar el espaciador externo con los dedos pulgar e índice.. Estas tres tuercas deben apretarse. 000B DANGER/ PELIGRO 0 000B WARNING/AVERTISSEMENT/ADVERTENCIA Do not operate mower unless guards are in operating position or bagger is attached. Ne jamais utiliser la tondeuse sans protecteur sur le canal d'ejection ou sans le bac monte. No operar segadora a menos que las defensas esten en posicion de operacion o el recogedor este fijo. PE0 000 Decal-Hot Surface (0, 0, 0) 000 Decal-Hot Surface (0, 0) 00 Decal-Instructional Set 0000 Decal-Safe Deck Removal 000 Decal, Belt Diagram (0, 0, 0, 0) 000 Decal-Bilingual Danger (0, 0) 000000 Decal-Bilingual Danger (0, 0, 0) 000 Non-Skid Cover 0000 Non-Skid Cover (0, 0) 000 Non-Skid Cover (0, 0, 0) 000 Decal, Mower Pan Head Danger 000 Decal, Warning 0 000 Decal, Blade Alignment 000 Decal- Safe Deck Removal, Export (0) 000 Decal-Instructional Steering 000 Decal, Parking Brake Lever
DECALS-STYLE Model 0, 0, 0, 0, 0 LARGEUR DE COUPE WIDTH OF CUT ANCHURA DEL CORTE 000A 00 Decal, Set EZR 0 (0) 00 Decal, Set EZR (0, 0) 00 Decal, Set EZR (0) 00 Decal, Set EZR (0) 000 Decal, Ariens Jewel Oval 000 Decal, (0) 000 Decal, (0, 0, 0, 0) 000 Decal, Width of Cut (0)
CLUTCH SHAFT-HYDRO Model 0, 0, 0, 0, 0 000 Bolt-Hex.-0 x.0 Grade (0) 000 Bolt-Hex.-0 x.0 Grade (0, 0, 0, 0) 0000 Washer-Locking. x.0 000 Washer-Flat-Steel. x.00 x. 000 Clutch-Electric/Brake (0) 000 Clutch-Electric/Brake (0, 0, 0, 0) 000 Spacer.00 x.00 x.0 (0) 000 Sheave-Jackshaft.0 (0) 000 Sheave- Jackshaft.0 (0, 0, 0, 0) 0000 Key-Square. x.00 x. SAE (0) 0000 Key-Square. x.00 x. SAE (0, 0, 0, 0) 0000 Shaft-Jack (0) 000 Shaft-Jack (0, 0, 0, 0) 000 Bearing-Ball. x.0 x. 0 000 Housing-Transmission Spindle 000 Screw-Tapping.- x. Hex Washer Head 00000 Spacer.00 x. x. 000 Washer-Flat-Steel. x. x. 000 Bolt-Hex.-0 x.00 Grade 000 Washer-Flat-Steel. x.00 x.0 0 PE00
PARKING BRAKE AND DUMP VALVES Model 0, 0, 0, 0, 0 0 0 PE00 000 Rod-Brake 000 Knob 000 Nut-Hex.- 0000 Dump Valve Weldment 000 Pin-Cotter.0 x. 000 Brake Arm Weldment 000 Spring-Tension.0 x.0 x. 000 Pin-Hair Internal.0 x. x. 000 Bolt-Hex.-0 x.00 0 0000 Bushing-Flange. x. x.00 000 Nut-Locking-Center.-0 000 Ring-Retaining External.0 x.00 000 Lever-Brake 000 Pivot-Brake Lever 000 Bolt-Hex.- x.00 Grade
HYDROSTATIC TRANSAXLE-RIGHT Model 0, 0, 0, 0, 0 0 0 0 0 0 0 PE00 Item Part No. Description 0 Screw.-0 x. 0RM Cover-Back 0 Ring-Retaining 00 Arm-Bypass 0 Seal-Lip 0000-00 Plug-Plastic 000 Ring-Retaining 00000-0 Seal-Lip 000 Spacer 0 000 Ring-Wire Retaining 000 Bearing-Ball Part Numbers listed on this page are Hydro Gear part numbers and are to be ordered or purchased from the nearest Hydro Gear Dealer, which may be found in the Yellow Pages of the Telephone Directory.
HYDROSTATIC TRANSAXLE-RIGHT Item Part No. Description 0 Bearing-Ball 0 Ring-Retaining 0 Seal-Brake Shaft 0 Brake Disc 0 Kit-Retaining Ring 0 Screw-Hex Washer Head /-0 x / 0 Service Assembly-Right Hand Brake Arm 0 Stud-Short /- 0 0 Friction Puck 000000-0 Seal-Lip 0 Arm-Control 0 Washer 0 Nut 000 Cradle Bearing 000 Variable Swashplate 0000 Slot Guide 00 Arm-Trunnion 0 Bearing-Thrust 0 x x 0 000 Shaft-Input 000 Washer-Block Thrust 000 Spring-Block 0 Assembly-Cylinder Block 0cc 00 Assembly-Center Section 00 Screw 00 Filter 00RM Housing-Lower 000 Pin-Alignment 00 Bypass Plate 0 00 Bypass Actuator 00 Assembly-Cylinder Block cc 0 Shaft-Motor 0 Bearing-Thrust x x 0000 Ring-Wire Retaining 0 Gear-Bevel T 0 Kit-Brake Shaft 0 Gear-Bevel T 00 Ring-Retaining - Axle 0 Seal-Plug - Side 0 0 Ring-Retaining - Axle 0 Bearing-Ball 0 x x 0- Bushing-Axle 0 Gear-Spur T 0- Bushing-Axle 0 Shaft-Axle 00 Bearing-Ball x x 0 Seal 0 Assembly-Hub 0 Nut-Hex /- 0 0 Housing-Upper Assembly Model 0, 0, 0, 0, 0
Model 0, 0, 0, 0, 0 HYDROSTATIC TRANSAXLE-LEFT 0 0 0 0 0 0 PE00 Item Part No. Description 0 Screw /-0 x. 0RM Cover-Back 0 Ring-Retaining 00 Arm-Bypass 0 Seal-Lip 0000-00 Plug-Plastic 000 Ring-Retaining 00000-0 Seal-Lip 000 Spacer 0 000 Ring-Wire Retaining Part Numbers listed on this page are Hydro Gear part numbers and are to be ordered or purchased from the nearest Hydro Gear Dealer, which may be found in the Yellow Pages of the Telephone Directory. 0
HYDROSTATIC TRANSAXLE-LEFT Item Part No. Description 000 Bearing-Ball 0 Bearing-Ball 0 Ring-Retaining 0 Seal-Brake Shaft 00 Ring-Retaining - Axle 0 Seal-Plug - Side 0 Ring-Retaining - Axle 0 Bearing-Ball 0 x x 0- Bushing-Axle 0 0 Gear-Spur T 0- Bushing-Axle 0 Shaft-Axle 00 Bearing-Ball x x 0 Seal 0 Assembly-Hub 0 Nut-Hex /- 0 Stud-Short /- 0 Friction Puck 000000-0 Seal, Lip 0 0 Arm-Control 0 Washer 0 Nut 0 Assembly-Upper Housing 000 Bearing-Cradle 000 Variable Swashplate 0000 Slot Guide 00 Arm-Trunnion 0 Bearing-Thrust 0 x x 000 Shaft-Input 0 000 Washer-Block Thrust 000 Spring-Block 0 Assembly-Cylinder Block 0cc 00 Assembly-Center Section 00 Screw 00 Filter 00RM Housing-Lower 000 Pin-Alignment 00 Bypass Plate 00 Bypass Actuator 0 00 Assembly-Cylinder Block cc 0 Shaft-Motor 0 Bearing-Thrust x x 0000 Ring-Wire Retaining 0 Gear-Bevel T 0 Kit, Brake Shaft 0 Gear-Bevel T 0 Brake Disc 0 Ring-Retaining 0 Screw-He-Washer-Head /-0 x / 0 0 Assembly-Left Hand Brake Arm Model 0, 0, 0, 0, 0
TRANSAXLE AND WHEELS Model 0, 0, 0, 0, 0 0 PE0 0000 Transaxle Hydro-Gear Right Hand 0000 Transaxle Hydro-Gear Left Hand 000 Bolt-Hex.- x.0 Grade 000 Nut-Locking-Center.- 000 Transaxle Bracket 000 Hose-Vent 00000 Fan 0000 Screw-Tapping 0- x. Hex Washer Head 000 Sheave-Transaxle 0 000 Nut-Locking-Top.0-0 0000 Transmission Cradle 000 Bolt-Hex.- x. Grade 000 Nut-Locking-Center.- 000 Tire/Wheel x.0-000 AR Rim for x.0- Tire 000 AR Tire x.0-0000 Nut-Lug.0-0 0000 Cap-Vent /" Hydro-Gear 0000 Fitting-Straight /" O-Ring Hydro-Gear
NOTES
ENGINE, EXHAUST AND BELTS Model 0, 0, 0 0 MACHINE BACK 0 PE0 0000 Engine-Briggs & Stratton Intek Single HP (0, 0) 0000 Engine, Briggs & Stratton Intek Single HP (0) 000 Bolt-Hex.- x.0 Grade 000 Washer-Flat-Steel. x.00 x.0 0000 Nut-Locking.- 000 Spacer 000 Engine Sheave.0 0000 Key-Square. x.0 x. 000 Washer-Special. x.000 x.0 000 Bolt-Hex.-0 x.00 Grade 0 0000 Washer-Lock. x.0 000 V-Belt, Transmission Drive 000 Cock, Oil Drain 000 Adapter, Oil Drain 000 Tube, Oil Drain 000 Cable Tie 0000 Muffler-Briggs & Stratton 000 Deflector-Briggs & Stratton 000 Screw-Briggs & Stratton 0 000 Muffler Adaptor Pipe 0 000 Screw-Cap.- x. 000 Gasket 000 Belt-L x. Engine to Jackshaft 000 Muffler Guard (0) 000 Screw-Tapping.0-0 x. (0)
ENGINE, EXHAUST AND BELTS Model 0, 0 MACHINE BACK 0 PE00 000 Engine, Briggs & Stratton Intek 0HP V Twin (0) 000 Engine, Briggs & Stratton Intek HP V Twin (0) 000 Bolt-Hex.- x.0 Grade 000 Washer-Flat-Steel. x.00 x.0 0000 Nut-Locking.- 000 Engine Sheave.0 0000 Key-Square. x.0 x. 000 Washer-Special. x.000 x.0 000 Bolt-Hex.-0 x.00 Grade 0000 Washer-Lock. x.0 0 000 V-Belt, Transmission Drive 000 Cock, Oil Drain 000 Adapter, Oil Drain 000 Tube, Oil Drain 000 Cable Tie 000 Belt-L x. Engine to Jackshaft 0000 Muffler Assembly
IDLERS Model 0, 0, 0, 0, 0 MACHINE BACK 0 0 PE00 000 Nut-Locking, Center.0-0000 Washer-Flat, Steel. x. x.0 000 Nut-Locking, Center.- 000 Nut-Hex.- 000 Spring-Extension 000 Bolt-Hex.- x.00 Grade 000 Bolt-Hex.0- x.0 Grade 000 Spacer-Idler Arm 0000 Fitting-Lube.-0 x. 0 000 Weldment-Idler Arm 0000 Bolt-Hex.- x.0 (0) 000 Bolt-Hex.- x.0 (0, 0, 0, 0) 000 Idler-.0 inch Diameter 000 Spacer-Idler inch (0) 000 Washer-Flat, Steel.0 x. x.0 000 Idler Arm Weldment Transaxle 000 Weldment-Jackshaft Idler Arm 000 Nut-Jam Lock.- 000 Idler-. inch Diameter 000 Washer-Hardened 0 000 Bolt-Hex.- x. Grade 000 Bolt-Round Head Square Shank.- x.0 000 Spacer-Idler 000 Washer-Flat-Steel. x. x. 0000 Ring-Retaining External. x.0 000 Bolt-Hex.0- x.0 Grade 000 Washer-Flat-Steel.0 x. x.0
FRAME Model 0, 0, 0, 0, 0 0 0 0 PE0 0 Hitch-Trailer (0, 0, 0, 0) 0 Bracket, Trailer Hitch (0) 0000 Bolt-Hex.- x. Grade 000 Nut-Locking-Center.- 000 Bolt-Hex.- x.00 Grade 000 Nut-Locking-Center.- 000 Brace 0 Frame 0000 Grip 000 Bolt-Hex.-0 x. Grade 0 0000 Nut-Locking-Nylon.0-0 Grade (0, 0, 0) 000 Nut-Locking-Center.0-0 Grade (0, 0) 0000 Nut-Locking-Nylon.- Grade (0, 0, 0) 0000 Bolt-Round Head Square Short Neck.- x. Grade (0, 0, 0) 0 Clutch Stop 000 Shroud-Footrest (0, 0, 0) 0 Weldment-Footrest (0, 0, 0) 00 Footrest (0, 0) 000 Bolt-Round Head Square Neck.- x. Grade 0 Bracket-Footrest (0, 0, 0) 0 Bracket-Footrest (0, 0) 0000 Bolt-Hex.- x. Grade (0, 0, 0) 0000 Bolt-Round Head Square Neck.-0 x.0 Grade (0, 0) 000 Washer-Flat-Steel. x. x.0 (0, 0, 0) 0 000 Washer-Flat-Steel.0 x. x.0 000 Bolt-Round Head Square Neck.- x.00 Grade (0, 0, 0) 000 Rod-Battery 000 Nut-Locking-Wing.0-0 000 Switch-Single Pole N.O. 0000 Bolt-Hex 0- x. Flat Washer Head 0000 Nut-Locking-Nylon 0- with Insert
SEAT AND SUPPORT Model 0, 0, 0, 0, 0 0 0 0 0 PE00 000 Seat 0000 Spring-Compression.L x.0 OD 0000 Boot-Seat Spring 000 Nut-Locking, Flange.- 0000 Bolt-Hex Flanged Whiz Lock Head.- x. 0000 Ring-Retaining-External.00 x.0 000 Axle-Front 0 Plate-Seat 0 Plate 0 000 Bolt-Hex.-0 x.0 Grade 0 Panel-Weldment 0 Support-Seat Weldment 000 Bolt-Hex.- x.00 Grade 000 Nut-Locking.- Grade A 000 Bushing-Flange 000 Screw, Tapping.- x. 0000 Washer-Lock. x.0 000 Washer-Flat-Steel. x. x.0 000 Bolt-Hex.- x.00 Grade 0 000 Arm Rest Kit 000 Arm Rest 000 Bracket-Left Hand Armrest 0000 Bracket-Right Hand Armrest 000 Hardware Pack, Armrest Kit
FUEL TANK Model 0, 0, 0, 0, 0 0 PE00 000 Clamp-Hose-Wire.0/.0 x. 000 Hose-Fuel. I.D. x. Long 000 Fitting-Tank 000 Bushing 000 Cap-Fuel 000 Fuel-Tank 0000 Plug-Button 0000 Bolt-Hex.- x. Grade 0000 Washer-Lock. x.0 0 000 Washer-Flat-Steel. x. x.0
FRONT AXLE Model 0, 0, 0, 0, 0 0 0 PE00 0 Axle Weldment 0000 Bushing-Flange.00 x. x. x. 0000 Fitting-Lube.- x. 0 Axle Frame Weldment 0000 Bushing-Sleeve. x.000 x. 000 Bushing-Sleeve. x. x. 000 Washer-Flat-Steel. x.0 x. 000 Bolt-Round Head Square Neck.- x. Grade 000 Nut-Locking-Center.- 0 00 Fork-Caster 000 Bolt-Hex.0- x.0 0000 Bushing-Caster Fork 000 Wheel & Tire x.00- (Contains Items -) 000 Rim Assembly 000 Tire 000 Bearing 000 Nut-Locking-Center.0- Grade 000 Bolt-Hex.- x. Grade 0000 Bolt-Hex.- x. Grade 0 0000 Washer-Lock. x.0 000 Washer-Flat-Steel. x.0 x. 0
BUMPERS Model 0, 0, 0, 0, 0 0 PE00 0000 Nut-Locking-Nylon.- Grade 000 Screw-Tapping.- x. Grade 000 Washer-Flat-Steel. x. x.0 0000 Bolt-Hex.- x. Grade 0 Bracket-Rail Support-Right Hand (0, 0, 0) 0 Bracket-Rail Support-Left Hand (0, 0, 0) 0 Rail-Side-Right Hand (0, 0, 0) 0 Rail-Side-Left Hand (0, 0, 0) 000 Cap-Sleeve (0, 0, 0) 0 0 Weldment-Bumper 0, 0, 0) 000 Nut-Locking-Nylon.- Grade (0, 0, 0) 000 Bolt-Round Head Square Neck.- x.00 Grade (0, 0, 0) 000 Pin-Index 0 Bracket-Stop 000 Spring-Compression 000 Washer-Flat-Steel. x.0 x.0 0000 Pin-Roll. x.00 000 Bolt-Hex.- x.00 Grade 0000 Washer-Flat-Steel.0 x.00 x. (0, 0)
Model 0, 0, 0, 0, 0 COVER ASSEMBLY, SOLENOID AND SWITCHES 0 0 0 PE0
COVER ASSEMBLY, SOLENOID AND SWITCHES 0 Shroud, Top (0, 0, 0, 0) 0 Shroud, Side Left Hand 0000 Bolt-Hex.- x. Grade 0000 0 Nut-Locking-Nylon.- 000 Snap-Cap Top Cap 000 Screw-Tapping 0- x.0 00000 Rivet-Burr. x.0 x.0 (0, 0, 0, 0) 0 Shroud-Side Right Hand 0000 Bolt-Hex.- x. Grade 0 00 Bracket-Control 0 Bracket-Hood (0, 0, 0, 0) 0 Bracket-Fuel Tank 000 Screw-Tapping.- x. Hex Washer Head 000 Snap-Cap Washer 000 Cupholder 0000 Latch, Flexible (0, 0, 0, 0) 0000 Rivet-Pop. x. Dome (0, 0, 0, 0) 0000 Key Switch 000 Cable-Throttle (0, 0) 000 Cable-Throttle (0, 0, 0) 0 0000 Nut-Locking-Nylon 0-0000 Washer-Lock-Internal. x.00 000 Nut-Panel.- 000 Cap-Ignition Switch 0000 Key with Cap 000 Cable-Choke (0, 0) 0000 Plug-Hole Plastic. (0, 0, 0) 000 Switch-Clutch 000 Screw-Machine 0- x.0 000 Washer-Flat-Steel. x. x.0 0000 Solenoid 0 000 Bolt-Hex.-0 x.0 000 Nut-Locking-Center.-0 Grade 0000 Washer-Lock-Internal. 000 Nut-Jam.- Model 0, 0, 0, 0, 0
CONTROLS Model 0, 0, 0, 0, 0 0 0 0 0 0 0 PE0 000 Weldment-Lever Right Hand 000 Grip-Handlebar 000 Weldment-Lever Left Hand 000 Weldment-Rod Left Hand 000 Weldment-Tube Right Hand 00000 Bushing-Nylon. x. x. 0000 Washer-Plastic. x. x.
CONTROLS Model 0, 0, 0, 0, 0 0000 Spring-Compression 000 Nut-Locking Cone.0-0 00000 Nut-Locking-Center.0-0 0000 0 Washer-Flat, Steel. x. x.0 000 Arm-Speed Control 000 Arm-Speed Control 000 Bolt-Hex.-0 x.0 Grade 000 Bolt-Hex.-0 x. Grade 000 Washer-Flat Steel. x.0 x.0 000 Nut-Locking-Center.0-0 000 Nut-Locking-Center.- 0000 Hub-Bearing Mount 0 00000 Bearing-Ball.00 x. x. 000 Washer-Flat, Steel.0 x. x.0 000 Bolt-Hex.- x.00 Grade 000 Rod-Transaxle Right Hand 000 Nut-Jam.- 000 Rod-End-Female. 000 Rod 000 Washer-Flat-Steel. x. x.0 000 Bolt-Hex.- x.00 Grade 000 Nut-Locking-Center.- 0 0000 Rod-Pivot 0000 Weldment-Neutral Detent 000 Bushing-Sleeve. x.0 x.0 000 Bolt-Hex.- x. Grade 000 Rod-Transaxle Left Hand 0000 Spring, Tension.0 x.0 x. 000 Weldment-Pump 0000 Key-Woodruff. x. 000 Spring 000 Switch-Neutral 0 0000 Nut-Stamped.- 0000 Bushing-Flanged 0000 Bolt-Hex.- x. Grade 0000 Fitting-Lube.- x. 000 Bolt-Hex.- x.00 000 Nut-Hex.- Grade 000 AR Rod Assembly-Transaxle Right Hand (Contains Item & two each of Items & ) 000 AR Rod Assembly-Transaxle Left Hand (Contains Item & two each of Items & ) 000 Washer-Flat-Steel. x. x.0 000 Bolt-Hex.- x. 0 000 Nut-Hex.- 0000 Handlebar-Large Frame 000 Cap Plug-Handlebar 000 Bolt-Round Head Square Neck.- x.00 Grade 000 Washer-Flat-Steel. x. x.0 0000 Nut-Locking-Flange.- 0000 Washer-Locking-External. x. x.0 00000 Washer-Locking-Internal. 0000 Bolt-Hex.- x. Grade 000 Eccentric 0 0000 Nut-Locking-Nylon.- 000 Nut-Hex.- 000 Washer-Flat-Steel. x x.
ATTACHMENT LIFT Model 0, 0, 0, 0, 0 0 0 0 0 PE0 000 Detent Plate 0000 Bushing-Flange.00 x. x. x. 0000 Washer-Flat-Steel.0 x.000 x. 000 Pin-Cotter. x.0 0 Lift Lever Weldment (0) 0 Lift Lever Weldment (0, 0, 0, 0) 000 Nut-Locking-Center.-0 0000 Spring-Tension.0 x. x. 000 Nut-Hex.-0 000 Bolt-Hex.-0 x.00 Grade 0 000 Nut-Locking-Center.- 000 Weldment-Release 0 Bracket-LIft 000 Spring-Tension 000 Spacer. x. x. 0 Handle-Deck Lift 000 Spacer. x. x. 0 Bracket-Handle 000 Bolt-Hex.- x.0 Grade 000 Bolt-Hex.- x. Grade 0 0000 Nut-Locking-Nylon.- 000 Bolt-Hex.- x.00 Grade 000 Bolt-Round Head Square Neck.- x. Grade 000 Bolt-Round Head Square Neck.- x.00 Grade 0000 Nut-Locking-Top Flange.-
HANGER ARM ( DECKS ONLY) Model 0 0 PE0 000 Pin-Hair External. x. x. 000 Bolt-Hex.- x. Grade 000 Nut-Locking-Center.- 000 Rear Hanger 000 Nut-Locking-Center.- 000 Weldment, Adjustment Link 0 Hanger, Rear Left Hand 0 Arm, Lift Left Hand 000 Washer-Flat-Steel. x. x.0 0 000 Pin 0 Hanger, Rear Right Hand 0000 Washer-Flat-Steel. x. x.0 000000 Hanger 000 Nut-Jam.- 0 Arm, Lift Right Hand 000 Pin-Cotter. x.00 000 Clip, Spring
Model 0, 0, 0, 0, 0 CONTINUITY DIAGRAM The diagrams below show the various states of connection for electrical components. The solid lines on switches show continuity. NOTE: All switches are viewed from the rear. Key Switch Relay (0000) (0000) A S A S A S B S B S B S A A M G M G M G OFF RUN START 0 NOT ENERGIZED 0 ENERGIZED PTO Switch Neutral Switch (000) (000) DISENGAGED (down position) ENGAGED (up position) STEERING LEVER IN POSITION (button up) STEERING LEVER OUT POSITION (button down) Seat Switch (000) Brake Switch (000) OPERATOR OFF SEAT OPERATOR ON SEAT DISENGAGED (button down) ENGAGED (button up) Solenoid (0000) NOT ENERGIZED ENERGIZED PE0
WIRING DIAGRAM Model 0, 0, 0, 0, 0 HEADLIGHTS BLACK OPTIONAL BLACK HOUR METER BLACK a PURPLE SEAT / PTO RELAY 0 RED / YELLOW PINK PTO SWITCH SEAT SWITCH PURPLE / WHITE 0 BLACK PTO CLUTCH ENGINE REGULATOR FUEL SOLENIOD BLACK OPTIONAL PURPLE RED / YELLOW 0 BRAKE SWITCH START RELAY BLACK BROWN / YELLOW LEFT HAND NEUTRAL SWITCH BLACK BLACK RED MAGNETO KILL STARTER RED BATTERY COIL COIL BLACK A BROWN WHITE / BLACK FUSE 0A B RED BLACK B G S A M a BLACK RED / VIOLET RED / YELLOW RED / VIOLET WHITE RIGHT HAND NEUTRAL SWITCH BLACK STARTER SOLENOID S KEY SWITCH PE0 0000 Key Switch 000 Hour Meter (Optional) 000 Switch-Clutch 000 Harness-Wiring 000 Clutch / Brake-Electric (0) 000 Clutch / Brake-Electric (0, 0, 0, 0) 000 Battery with Tube (0, 0) 000 Battery with Tube (0, 0) 000 Start Cable 000 Starter Cable 0000 Relay 0 000 Switch-Seat 000 Switch-Neutral 0000 0 AMP Fuse 0000 Plug-Molded Diode 000 Cap-Ignition Switch 000 Switch-Brake 0000 Solenoid 000 Ground Cable
MOWER DECK Model 0, 0, 0, 0 0 0 PE0 000 Mower- Ariens EZR with Decals 0000 Mower- Ariens EZR Assembly Complete 0 Reinforcement-Deck 000 Cover-Deck Reinforcement 000 Cover-Deck Reinforcement 000 Bolt-Hex.- x.00 000 Nut-Locking-Center.- 000 Screw-Tapping Hex Washer Head Thread Rolling.- x.0 000 Nut-Locking-Top-Flange.- 000 Nut-Lock-Center.- 0 0 Weldment-Baffle Upper Left Hand 0 Weldment-Baffle Upper Right Hand 000 Deflector-Chute 00 Hinge-Plate 000 Bolt-Round Head Square Neck.-0 x. 0000 Nut-Locking-Flange.0-0 0000 Ring-Retainig-External. x.0 0000 Spring-Torsion.0 x.0 x.00 0000 Bushing 000 Pin 0 0 Deflector-Baffle 000 Nut-Locking-Nylon.- 0000 Bolt-Hex.- x. 000 Nut-Locking-Center.- 000 Bolt-Round Head Square Neck.- x. 000 Washer-Flat-Steel.0 x. x.0 000 Bolt-Hex.- x. 0
MOWER BRACKETS AND ROLLERS Model 0, 0, 0, 0 0 0 PE0 000 Nut-Locking-Center.- 000 Bolt Round Head Square Neck.- 0000 Washer-Flat-Steel. x. x.0 000 Bolt-Hex.- x.0 Grade 000 Pin-Clevis.0 x. 000 Washer-Flat-Steel.0 x. x.0 000 Clip-Spring 000 Pin-Hair-External. x. x. 0 Link-Lift 0 0 Bracket-Lift 000 Link-Adjustment 000 Trunnion 000 Bracket-Roller Bracket Adjustment 000 Wheel x 0 Weldment-Deck Stop Bracket 000 Bolt-Hex.0- x.00 000 Nut-Locking-Center-Jam.0-000 Pin-Clevis. x. 000 Pin-Hair Internal.0 x. x. 0 000 Nut-Locking-Nylon.- 000 Pin-Clevis.0 x.00 000 Reforcement, Deck Lift
MOWER SPINDLE Model 0, 0, 0, 0 0 0 0 0 0 0 0 0 0 0 PE0
MOWER SPINDLE 0000 Nut-Locking-Nylon.- 000 Washer-Flat-Steel.0 x.00 x.0 000 Spacer. x. x.0 000 Bearing. x. x. 000 Bolt-Round Head Square Neck.- x. 000 Jackshaft 000 Nut-Locking-Center.- 000 Sprocket-Drive 0 Weldment-Plate Mount 0 0000 Assembly-Idler Pulley 000 Nut-Locking-Jam-Center.- 0000 Nut-Locking-Top-Flange.- 000 Arm-Idler 000 Bolt Round Head Square Neck.- x. Grade 000 Washer-Flat-Steel. x.00 x.0 000 Nut, Locking-Center.- 000 0 Bolt-Round-Head Square Neck.- x. Grade 000 Bolt-Round-Head Square Neck.- x. Grade 000 Spring-Compression. x. x. 0 000 Bracket-Belt Adjustment 000 Washer-Flat-Steel. x.00 x.0 000000 Bolt-Eye.- x.0 0000 Spacer. x.0 x. 000 Nut-Locking-Nylon.- 000 Belt-Cog 000 Belt-V A-RMA 000 Bolt-Hex.-0 x. Grade 000 Spring-Compression.0 x. x. 000 Retainer-Brace 0 000 Weldment-Front Mount 000 Rod Link 000 Washer-Flat-Steel. x. x.0 0000 Nut-Locking-Nylon.-0 000 Nut-Locking-Center..0-0000 Washer-Flat-Steel. x. x.0 000 Assembly-Spindle Housing 000 Weldment-Spindle Shaft 0000 Nut-Locking-Top-Flange.- 0000 Key Woodruff. x. x. 0 0000 Bearing-Slinger 000 Washer-Flat-Steel. x. x. 000 Hub-Retainer 000 Tray-Blade 000 Blade, Mulch " (0, 0, 0) 0000 Blade- Low Lift-CE (0) 0000 Washer-Locking. x. 000 Nut-Jam.-0 000 Clip-Spring 000 Washer-Flat-Steel. x.0 x.0 000 Nut-Locking-Flange Grade.A.- 0 000 Bolt-Round-Head Square Neck.- x.00 Grade 000 Bushing-Sleeve.0 x. x. 0000 Spacer.0 x.0 x. 0000 Nut-Locking-Nylon.0- Model 0, 0, 0, 0
MOWER SPINDLE Model 0 PE00 0 0 0 0
MOWER SPINDLE 000 Belt, " Clutch to Deck 000 Belt, " Deck 000 Bolt-Round Head Square Neck.- x. Grade 0 Housing, Spindle 000 Washer-Flat-Steel.0 x. x.0 000 Nut-Locking-Center.- 000 Sheave, " Deck 0000 Washer-Lock.0 x. 000 Nut-Jam.-0 0 0000 Fitting, Lube. 0000 Fitting, Lube.- x. 0000 Sheave 0000 Bearing-Ball.0 x. x. 00 Spindle Shaft w/zerk 0000 Key-Woodruff. x. x. 000 Spindle Housing 000 Washer-Flat-Steel. x.000 x.0 000 Spacer, Spindle 0000 Nut-Locking-Top-Flange.- 0 0000 Bearing Slinger 0000 Retainer Hub 000 Blade Tray 0000 Key-Square. x. x. 000 Blade 000 Washer-Flat-Steel. x.0 x. 000 Spindle Shaft with Zerk & Key 000 Bolt-Hex.- x.0 Grade 0 Bracket 000 Nut-Locking-Center.- 0 0000 Spring-Compression.0 x. x.0 000 Rod-Idler Spring 0000 Pin-Cotter.0 x. 0000 Idler-Plastic. OD x.0 ID 000 Nut-Locking-Center.0-000 Washer-Flat-Steel.0 x.0 x.0 0 Idler Arm w/zerk 000 Bolt-Hex.0- x.0 Grade 00000 Bolt-Button Head.- x. Grade 000 Spacer-Flanged.0 x.00 x. x. 0 000 Spacer, Pivot Model 0
MOWER PAN Model 0 0 0 0 0 0 0 0 PE0 000 Mower Pan Head w/decals " (0) 0 Front Hanger 0 Bracket, Roller 000 Roller 000 Roller Shaft 000 Bolt-Round Head Square Neck.- x. Grade 000 Nut-Locking-Center.- 000 Bolt-Round Head Square Neck.0- x. - Short Neck 000 Nut-Locking-Center.0- Grade
MOWER PAN Model 0 0 0 Weldment-Left Front 000 Bolt-Round Head Square Neck.- x. 000 Nut-Locking-Top-Flange.- 000 Roller 0000 Bolt-Hex.- x.0 Grade 000 Washer-Flat-Steel. x. x.0 000 Nut-Locking-Center.- 0 Bracket-Left Rear 00 Belt Cover Right Hand " 00 Belt Cover Left Hand 0000 Fitting-Lube.-0 x. 0 000 Nut-Locking.- 0000 Washer-Locking. x.0 000 Bolt-Round Head Square Neck.- x. 0 Left Hand Rear Hanger 0 Left Hand Rear Hanger Support 0 Right Hand Rear Hanger Support 0 Right Hand Rear Hanger 000 Bolt-Hex.0- x.00 Grade 0000 Hinge Pin 0000 Bolt-Hex.- x. Grade 0 000 Washer-Flat-Steel.0 x. x.0 0000 Pin-Cotter.0 x. 00 Chute Extension 00 Flat Spring 000 Nut-Locking-Center.-0 0000 Bolt-Round Head Square Neck.-0 x.0 Grade 0 Weldment-Right Rear 000 Bolt-Round Head Square Neck.- x.0 Grade 0000 Washer-Lock. x. 000 Nut-Hex.- 0 0 Baffle 0 Baffle Tab 000 Washer-Flat-Steel. x.0 x.0 000 Bolt-Round Head Square Neck.- x.0 Grade 000 Bolt-Round Head Square Neck.- x.00 Grade 0 Weldment-Right Front 0 Caster Fork Weldment 000 Pin-Cotter. x. 000 Washer-Flat-Steel.0 x.00 x.0 0000 Bushing-Sleeve. x.0 x.00 0 0 Mower Adjustment Tab
Ariens Company West Ryan Street P.O. Box Brillion, WI 0-0 0-- Fax 0--0 www.ariens.com