POWER RELAY 1 POLE - 3, A Medium Load Control (AgNi contacts) JY Series FEATURES Small and good for high density mounting Mounting space mm, height 1.mm UL, CSA recognized High sensitivity and low power consumption power consumption 9mW, rated power consumption mw Wide operating range Plastic sealed type Socket mounting type and socket available Pin compatible with solid state relays type SJ Through hole Plastic materials: UL flammability 9V- RoHS compliant. Applications Sequencer, FA equipment etc. Part Numbers [Example] JY - 1 G - K P - UL (a) (b) (c) (d) (e) (f) (a) Relay type JY : JY series (b) Coil rated voltage 1 :...VDC (c) Contact rating / material / construction W G R HG HR (d) Enclosure K : Plastic sealed type (e) Terminal type Nil P (f) Safety approval Nil UL : 3A, gold overlay silver, bifurcated contact : 3A, gold flash silver, single contact : 3A, silver, single contact : A, gold flash silver, single contact : A, silver, single contact : PC board mounting type : Socket mounting type (without JY-W) : Without safety standard : UL, CSA recognized type Note: Actual marking omits the hyphen (-) and suffix P and UL 1
Specifications Item JY - ( ) W JY - ( ) G JY - ( ) R JY - ( ) HG JY - ( ) HR Contact data Configuration 1a (1 form A (SPST-NO) ) Construction Material Bifurcated (cross bar) Gold overlay silver JY Series 3A type A type Remarks / conditions Gold flash silver Silver Resistance Max. 3 mω Max. 1 mω Single Gold flash silver Max. 3 mω Silver Max. 1 mω Contact rating 3A, VAC / 3VDC A, VAC / 3VDC Max. carrying current Max. switching voltage A VAC / 1 VDC Max. switching power 7VA, 9W 1,VA, 1W Max. switching current 3A A (socket 3A) Min. switching load *.1mA 1 mvdc 1mA VDC 1mA VDC 1mA VDC 1mA VDC Coil Rated power consumption mw (V type: 3 mw) At ºC Timing data power consumption 1 mw (V type: 17 mw) At ºC Operating temperature range -ºC ~ +9ºC (V type: + C) Initial (at VDC, 1A) No frost Max. ms At nominal voltage (without diode, without bounce) Max. 3 ms At nominal voltage (without diode, without bounce) Life Mechanical Min. x 1 operations Insulation Electrical Min. 1 x 1 3 operations Contact rating Insulation resistance Min. 1,MΩ at VDC Initial Dielectric strength Open contacts Coil contact 7VAC, 1 minute,vac, 1 minute Other Surge strength Vibration resistance Shock resistance Coil to contacts Dimensions / weight Sealing Misoperation Endurance Misoperation Endurance,V (1. x µs standard wave) 1 to to 1Hz single amplitude.7 mm 1 to to 1Hz single amplitude.7 mm Min. 1m/s² (11 ± 1ms) Min. 1,m/s² ( ± 1ms) 9.. 1. mm / approx. g Plastic sealed, RTIII * : Minimum switching loads mentioned above are reference values. Please perform the confirmation test with actual load before production since reference values may vary according to switching frequencies, environmental conditions and expected reliability levels.
Coil Data Coil code Rated Coil Voltage (VDC) Coil Resistance +/-1% (Ω) Must Voltage * (VDC) Must Voltage * (VDC).. 1 3.1.3 1 3.. 1..3 9 9.3. 1 1 7.. 1 1 1, 1..9, 1. 1. JY Series Rated Power (mw), 3.. 3 Note: All values in the table are valid for o C and zero contact current unless otherwise specified. Note: Care shall be taken on the heat generated on PC board when maximum carrying current exceeds 1A. Please perform the confirmation test with actual conditions * : Specified operated values are valid for pulse wave voltage. Safety Standards Type Compliance Contact Rating UL UL E1 CSA C. No. 1 LR 379 JY-( )HG-K, JY-( )HR-K A VAC / 3VDC resistive 1/HP, 1VAC / VAC Pilot duty C1, C3 JY-( )G-K, JY-( )R-K 3A VAC / 3VDC resistive 1/1HP, 1VAC / VAC Pilot duty D1 JY-( )W-K A VAC / 3VDC resistive 1/HP, 1VAC /VAC Pilot duty C3 Dimensions Dimensions. +. 9. +. 1. +.3 7. (1.) 1.1 3.3...3. (1.9) 7. Schematics (BOTTOM VIEW) COM NO 1 13 9 3
PC Board Mouting Hole Layout (BOTTOM VIEW) -φ1.1 7. (1.9) (1.) 7. 1.1 Tolerance of PC board mounting hole layout: ±.1 unless otherwise specified. ( ): Reference value Unit: mm Socket Dimensions 3. 9.... 7. 1.1 3. 7.. (19.) 7... PC Board Mouting Hole Layout (BOTTOM VIEW) -φ1.1 7. (1.9) (1.) 7. 1.1 Tolerance of PC board mounting hole layout: ±.1 unless otherwise specified. ( ): Reference value Unit: mm Note: 1: Socket ordering code: JK-N : Standard IC socket is not recommended. Please use socket "JK-N"
Characteristic Data Time (ms) 7.... 3.. 1. Timing Max. 3 Min. Max. 1 Min..1..3... Coil Power (W) Temperature rise (degc) Coil Temperature Rise A 3A A Nominal Voltage Multiplying Factor.1..3... 1 Coil Power (W) Ambient Temperature (degc)... 1. 1. 1. 1. 1... Operating Range (. to VDC coil). to VDC coil A 3A A Must Voltage (Hot Coil) Must Voltage (Cool Coil) Operating Range (VDC coil) Maximum Switching Power Life Curves Nominal Voltage Multiplying Factor... 1. 1. 1. 1. 1.. A 3A A Must Voltage (Hot Coil). 1 Ambient Temperature (degc) Must Voltage (Cool Coil) VDC coil Contact Current (A) 1 3 1..3 3A type DC Resistive A type DC Resistive 1 3 1 Contact Operation (x1 ) 1 3 1 3 1 DC3V, L/R=7ms AC1V, cosφ=. ACV, cosφ=. AC1V, Resistive DC3V, ACV Resistive A type.1..3. 1 3 Contact Current (A) Distribution of & Voltage Distribution of & Time Distribution of 1 JY-HG-K n= 1 JY-HG-K n= JY-HG-K n= Distribution (%) Distribution (%) Distribution (%) 1 3 7 Nominal Voltage Multiplying Factor (%) 1 3 Time (ms) 7 1 1
Distribution (%) 1 Distribution of Mechanical Life Test Mechanical Life Test JY-W-K 1 n=1 1 1 1 JY-1W-K n=1 1 operations/min. 1 1 3 Contact Resitance JY-HG-K 1 n=1 1 operations/min. 1 1 Initial 1 1 Initial 1 1 Operation (X 1 ) Operation (X 1 ) Electrical Life Test Electrical Life Test Electrical Life Test 1 1 JY-G-K n=1 1 Operations/Min. ACV 3A (Resistive) 1 1 Initial 1 3 7 1 1 Operations (x 1 ) 1 1 JY-G-K n=1 3 Operations/Min. DC3V 3A (Resistive) 1 1 Initial 1 3 7 1 1 Operations (x 1 ) 1 1 1 1 JY-HG-K n=1 1 Operations/Min. ACV A (Resistive) Initial 1 3 7 1 1 Operations (x 1 ) 1 1 1 1 JY-HG-K n=1 3 Operations/Min. DC3V 3A (Resistive) Electrical Life Test Initial 1 3 7 1 1 Operations (x 1 ) 1 1 1 Initial Electrical Life Test JY-1W-K n= 3 Operations/Min. ACV 3A (Resistive) 1 3 Operations (x 1 ) 1 1 1 Initial Electrical Life Test JY-1W-K n= 3 Operations/Min. DC3V 3A (Resistive) 1 Operations (x 1 )
GENERAL INFORMATION 1. ROHS Compliance All relays produced by Fujitsu Components are compliant with RoHS directive 11//EU including amendments. Use of Cadmium in electrical contacts is exempted as per Annex III of the RoHS directive 1//EU. Please consider expiry date of exemption. Relays with Cadmium containing contacts are not to be used for new designs. All relays are lead-free. Please refer to Lead-Free Status Info for older date codes at: http://www.fujitsu.com/downloads/micro/fcai/relays/lead-free-letter.pdf Lead free solder plating on relay terminals is Sn-3.Ag-.Cu, unless otherwise specified. This material has been verified to be compatible with PbSn assembly process.. Recommended Lead Free Solder Profile Recommended solder for assembly: Sn-3.Ag-.Cu. Solder by Soldering Iron: Soldering Iron 3-W Temperature: maximum 3-3 C Duration: maximum 3 sec. Flow Solder condition: Pre-heating: maximum 1 C within 9 sec. Soldering: dip within sec. at C ± C solder bath Relay must be cooled by air immediately after soldering We highly recommend that you confirm your actual solder conditions 3. Moisture Sensitivity Moisture Sensitivity Level standard is not applicable to electromechanical relays, unless otherwise indicated. Tin Whiskers Dipped SnAgCu solder is known as presenting a low risk to tin whisker development. No considerable length whisker was found by our in house test. 7
Fujitsu Components International Headquarter Offices Japan FUJITSU COMPONENT LIMITED Shinagawa Seaside Park Tower 19F, 1-, Higashi-shinagawa -chome, Shinagawa-ku, Tokyo,1-, Japan Tel: (1-3) 3-1 Fax: (1-3) 37-3 Email: fcl-contact@cs.jp.fujitsu.com Web: www.fujitsu.com/jp/fcl/ North and South America FUJITSU COMPONENTS AMERICA, INC 9 North First Street, Suite 1 San Jose, CA 9131, USA Tel: (1-) 7-9 Fax: (1-) 7-97 Email: components@us.fujitsu.com Web: us.fujitsu.com/components Europe FUJITSU COMPONENTS EUROPE B.V. Diamantlaan 13 WV Hoofddorp Netherlands Tel: (31-3) 91 Fax: (31-3) 9 Email: info@fceu.fujitsu.com Web: www.fujitsu.com/uk/components Asia Pacific FUJITSU COMPONENTS ASIA, LTD. 1E Pasir Panjang Road #1-1 Citilink Warehouse Complex Singapore 119 Tel: () 37- Fax: () 73-31 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components China FUJITSU ELECTRONIC COMPONENTS (SHANGHAI) CO., LTD. Unit 3, InterContinental Center 1 Yu Tong Road, Shanghai 7, China Tel: (-1) 33 99 Fax: (-1) 33 997 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components Hong Kong FUJITSU COMPONENTS HONG KONG CO., LTD Unit, Inter-Continental Plaza No.9 Granville Road, Tsim Sha Tsui, Kowloon, Hong Kong Tel: () 1-9 Tex: () 9-91 Email: fcal@sg.fujitsu.com Web: www.fujitsu.com/sg/products/devices/components/ Korea FUJITSU COMPONENTS KOREA LIMITED Alpha Tower #3, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, 13 Korea Tel: () 31-7-71 Fax: () 31-79-71 Email: fcal@sg.fujitsu.com www.fujitsu.com/sg/products/devices/components/ 1 Fujitsu Components Europe B.V. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. The contents, data and information in this datasheet are provided by Fujitsu Component Ltd. as a service only to its user and only for general information purposes. The use of the contents, data and information provided in this datasheet is at the users own risk. Fujitsu has assembled this datasheet with care and will endeavor to keep the contents, data and information correct, accurate, comprehensive, complete and up to date. Fujitsu Components Europe B.V. and affiliated companies do however not accept any responsibility or liability on their behalf, nor on behalf of its employees, for any loss or damage, direct, indirect or consequential, with respect to this datasheet, its contents, data, and information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Nor do Fujitsu Components Europe B.V. and affiliated companies accept on their behalf, nor on behalf of its employees, any responsibility or liability for any representation or warrant of any kind, express or implied, including warranties of any kind for merchantability or fitness for particular use, with respect to these datasheets, its contents, data, information and related graphics and the correctness, reliability, accuracy, comprehensiveness, usefulness, availability and completeness thereof. Rev. Dec 1 th, 1