Mercury Products Open Platform Solution

Mercury Products Open Platform Solution Product Bulletin Code No. LIT-12011850 Software Release 3.12 Issued July 24, 2013 Refer to the QuickLIT Web site for the most up-to-date version of this document. Johnson Controls, Inc. now offers Mercury Security Corporation s high quality access control hardware products, which can be integrated with the Johnson Controls P2000 Security Management System (SMS), providing added flexibility to help you meet the needs of your site s security requirements and applications using a well-known and time-tested security products manufacturer. The following Mercury hardware products are available separately or as part of a pre-configured security control panel assembly housed in a secure enclosure: CKM-EP2500, CKM-EP1501, and CKM-EP1502 intelligent controllers CKM-MR51e, CKM-MR50, and CKM-MR52 reader interface modules CKM-MR16in input modules CKM-MR16out output modules DM-21 intrusion display CKM-MUX-8 multiplexer For an illustration on the P2000 and Mercury integration architecture, see Figure 1 on page 2. Using this mix of robust and feature-rich security products, you can find the solution that best fits your access control needs, such as IP and Power over Ethernet (PoE) capabilities, system scalability up to 64 doors, and support for installations that use RS-485 communications. The P2000 and Mercury access control products open platform solution offers multiple configuration options for small-to-large security applications, whether you are installing a new security system or retrofitting an existing one. Table 1: Features and Benefits Features Benefits P2000 Host Software Integration IP Compatibility Power Over Ethernet (PoE) Support of Multiple Reader Technologies Alarm Input Module Relay Output Module Security Panel Assemblies Elevator Integration Support Intrusion Integration Support Data Expansion Provides a single, intuitive central software interface to configure and operate the controllers within the P2000 SMS. Provides ease of installation, added flexibility, and potential cost savings in an existing IT infrastructure. IP-compatible controllers are auto-addressable with the use of an external Dynamic Host Configuration Protocol (DHCP) enabled server, or they can be manually configured using static IP addresses. Enables a single Ethernet cable to provide both power and communications to Mercury devices. Such as Wiegand, clock and data, magnetic stripe, keypads, LCD, and biometrics, adding flexibility for systems that require a wide array of reader options. Allows the system to monitor high concentrations of supervised or unsupervised inputs together with a low requirement for output control. The CKM-MR16in can support 16 general purpose input circuits. Provides the ability to control high concentrations of outputs (16 general purpose) as Form C relay contacts, which can be used to control a variety of outboard devices for general facility control such as lighting, heating and cooling, door, and elevator control. Make it easy to power, house, and store the Mercury components in a secure enclosure and in a variety of configurations. Allows P2000 to support up to 128 floors in a low-level interface with Mercury inputs and outputs used for floor selection and tracking. All elevator-related components are associated with a single Mercury controller. Enables sites to use Mercury components for an intrusion detection system within the P2000 SMS. Adds flexibility to expand a single data line into multiple data lines to meet difficult system design and installation challenges. 1

Table 1: Features and Benefits Features Benefits Standards and Compliance Remote Update Feature Helps your site meet certain agency requirements such as UL 294, CE, Restriction of Hazardous Substances (ROHS), Federal Communications Commission (FCC) Part 15 Class A, and National Institute of Standards and Technology (NIST) Certified Encryption. Enables you to update Mercury firmware remotely using the P2000 server, saving time and cost on travel and technician service calls. P2000 Server P2000 Workstation CKM-MR51E Door 1 IP Network Wide Area Network CKM-EP2500 CKM-EP1502 CKM-EP1501 RS-485 Door 1 RS-485 Door 2 RS-485 Door 1 CKM-MR52 CKM-MR52 CKM-MR52 Supports 2 Doors Supports 2 Doors Supports 2 Doors CKM-MR50 CKM-MR50 CKM-MR50 Supports 1 Door Supports 1 Door Supports 1 Door CKM-MR16in CKM-MR16in CKM-MR16in 16 General Purpose Inputs 2 Relay Outputs 16 General Purpose Inputs 2 Relay Outputs 16 General Purpose Inputs 2 Relay Outputs CKM-MR16out CKM-MR16out CKM-MR16out 16 Relay Outputs 16 Relay Outputs 16 Relay Outputs Scalable to 64 Doors Scalable to 64 Doors Scalable to 17 Doors Figure 1: P2000 and Mercury Integration Architecture 2

Access Platform CKM-EP2500 Controller The Access Platform CKM-EP2500 is an intelligent controller platform with native network support. This powerful and high-performance platform provides an Ethernet ready controller capable of efficiently managing a large network of Mercury access modules in multiple system designs. Based on the intelligent, next-generation Mercury Access Foundation, the CKM-EP2500 uses an Ethernet link to connect to the Microsoft Windows based P2000 host to provide access control, alarm management, and scheduled operations all in one package. The CKM-EP2500 is capable of elaborate processes and procedures without host intervention. Once configured, the CKM-EP2500 functions independently of the host, and is capable of controlling access, managing alarms, interfacing with an array of Mercury hardware devices, all while providing the decision-making oversight that each system configuration requires. CKM-EP2500 supports the range of reader technologies, including Wiegand, magnetic stripe, and biometric RS-485 connectivity. Figure 2: CKM-EP2500 Intelligent Controller Application Notes As an intelligent system cornerstone, the CKM-EP2500 provides the greatest system capacity within Mercury s family of controller platforms. The Access Platform CKM-EP2500 is best deployed in systems where highend capabilities and network-ready capacity are required. For high device counts, large numbers of readers, and a high volume of system activity, the CKM-EP2500 is the controller of choice. Benefits Network ready System intelligence decentralized Intelligent oversight and auxiliary monitoring Scalable to 64 doors Note: The CKM-EP2500 does not support shared mode and central mode communications with the P2000 host. Features Fault-tolerant IP communications capability Multi-card format support Multi-reader technology support Transport Layer Security (TLS) encryption support between P2000 server and controller Homeland Security Presidential Directive (HSPD) 12 and Federal Information Processing Standards (FIPS) 201 Compliant Underwriters Laboratories (UL) 294 Recognized Alarm keypad support for intrusion applications Technical s Table 2: CKM-EP2500 Controller s Primary Power 12-24 VDC +/- 10%, 300 ma maximum Ethernet/Serial Ports Inputs Port 1: Primary 10/100 Ethernet Port 2: RS-485, 2-wire Port 3: RS-485, 2-wire Two dedicated: tamper and power monitor Dimensions 5.0 in. W x 6.0 in. L x 1.0 in. H (127 mm W x 152 mm L x 25 mm H) Temperature Operational: 0 to 50 C Storage: -55 to 85 C Humidity 10 to 85% Relative Humidity Non Condensing (RHNC) 3

CKM-EP2500 Architecture Diagram P2000 Server P2000 Workstation CKM-MR51E Door 1 IP Network Wide Area Network Door 1 Door 2 CKM- EP2500 Door 1 RS-485 CKM-MR52 CKM-MR50 CKM-MR16in CKM-MR16out General Purpose Inputs (16) Dedicated Inputs (2) Relay Outputs (2) Relay Outputs (16) Dedicated Inputs (2) Scalable to 64 Doors Figure 3: Architecture Diagram of the CKM-EP2500 Controller 4

Technical Features Table 3: CKM-EP2500 Technical Features Feature Description Connectivity Primary Port: 10/100 Ethernet, DHCP Client, TLS, X.509 Access Control 500,000 cardholder capacity 50,000 transaction buffer Card Formats 8 active card formats per CKM-EP2500 Entire card number reported on invalid read 18-digit (63-bit) UserId and 9-digit Personal Identification Numbers (PIN) maximum Personal Identify Verification (PIV) II, Common Access Card (CAC), and Transportation Worker Identification Credential (TWIC ) card compatible 32 access groups per cardholder Activation/Deactivation dates Reader-based or time-based access control Standards 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. EP2500 Ordering Information Table 4: Ordering Information Part Number Description CKM-EP2500 CKM-EP2500 Mercury network controller Related Documentation Table 5: Related Documentation Document Title Document Number Mercury CKM-EP2500 Controller Hardware Installation Manual Part No. 24-10707-23 P2000 Software User Manual Part No. 24-10685-157 CKM-EP2500, CKM-EP1502, and CKM-EP1501 Mercury Network Controllers LIT-1900829 Catalog Page 5

Access Platform CKM-EP1501 Controller The Access Platform CKM-EP1501 is an intelligent controller within the EP platform family and is built on the Mercury Access Foundation. The CKM-EP1501 provides a high-performance, Ethernet ready, costeffective dual card reader panel capable of controlling a single opening. The CKM-EP1501 is expandable up to 8 downstream supervised input/output (SIO) controllers and up to 16 CKM-MR51e network ready door controllers for a total of 17 doors. Easy installation with PoE makes this the top choice for a single-door controller. Once configured, the CKM-EP1501 functions independently of the host and is capable of controlling access and managing elaborate processes such as relating selected system devices and their activity to other onboard devices, allowing actions and activities to transpire without host intervention. Offering powerful flexibility, the CKM-EP1501 is capable of interfacing with an array of reader technologies for a single opening. Reader ports support separate in/out readers and technologies that include Wiegand, clock and data, RS-485, magnetic stripe, keypads, LCD, and biometrics. Figure 4: CKM-EP1501 Intelligent Controller Application Notes The CKM-EP1501 seamlessly interfaces a single opening with a larger system for easy expansion. Providing all the intelligence and functionality of the Mercury family of controllers, the CKM-EP1501 is PoE capable and sets the standard for powerful, reliable performance, all at an economical price point. Benefits System intelligence decentralized Single-door interface Network ready Scalable to 17 doors Features Seamless P2000 software interface integration Supports multiple card formats and card reader technologies PoE capable Triple gang footprint CKM-MR51e support (up to 16) SIO module interface capability (up to 8) Technical s Table 6: CKM-EP1501 Controller s Power Input PoE Power Input 12.95 W, compliant to IEEE 802.3af or 12 VDC ± 10% 900 ma maximum power supply Note: For UL installations, PoE powered devices shall not be used. Power for these devices must be provided by a UL 294 listed power limited source (12 VDC). Power Output Reader Interface Inputs Outputs Reader Ports Keypad LED Buzzer Dimensions 12 VDC at 650 ma, including reader and AUX output Reader Power: PoE: 12 VDC ± 10% or local power supply (12 VDC). (PTC limited 150 ma maximum) 2 general purpose programmable circuit type, and dedicated tamper 2 relays Form C, 2 A at 30 VDC Two Transistor Transistor Logic (TTL) reader ports or one 2-wire RS-485 reader port capable of supporting two readers Multiplexed with card data Two-wire or one-wire bicolor support Only with one-wire LED Without Bracket: 5.5 in. W x 2.75 in. L x 0.96 in. H (140 mm W x 70 mm L x 24 mm H) With Bracket: 5.5 in. W x 3.63 in. L x 1.33 in. H (140 mm W x 92 mm L x 34 mm H) Temperature Operational: 0 to 50 C Storage: -55 to 85 C Humidity 10 to 85% RHNC 6

CKM-EP1501 Architecture Diagram P2000 Server P2000 Workstation CKM-MR51E Door 1 IP Network Wide Area Network Door 1 Door 2 Door 1 CKM- EP1501 Door 1 RS-485 CKM-MR52 CKM-MR50 CKM-MR16in CKM-MR16out General Purpose Inputs (16) Dedicated Inputs (2) Relay Outputs (2) Relay Outputs (16) Dedicated Inputs (2) Scalable to 17 Doors Figure 5: Architecture Diagram of the CKM-EP1501 Controller 7

Technical Features Table 7: CKM-EP1501 Technical Features Feature Description Connectivity Primary Port: 10/100 Ethernet Door Control One physical barrier can be controlled using single or paired readers. Two reader ports: Mag, Wiegand, or RS-485 (RS-485 on one reader port capable of supporting two readers) Two supervised inputs, two relays. Diagnostic LEDs. Dedicated tamper input. Access Control 240,000 cardholders 50,000 transaction buffer 32 access groups per cardholder 18-digit (63-bit) UserId and 9-digit PIN numbers maximum Card Formats 8 active card formats per CKM-EP1501 PIV-II, CAC, and TWIC card compatible Reader-based or time-based access control Alarm Management Normally open/closed, unsupervised, supervised. Standard or custom end-of-line resistances Standards 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. EP1501 Ordering Information Table 8: Ordering Information Part Number Description CKM-EP1501 CKM-EP1501 Mercury network controller Related Documentation Table 9: Related Documentation Document Title Document Number Mercury CKM-EP1501 Controller Hardware Installation Manual Part No. 24-10707-7 P2000 Software User Manual Part No. 24-10685-157 CKM-EP2500, CKM-EP1502, and CKM-EP1501 Mercury Network LIT-1900829 Controllers Catalog Page 8

Access Platform CKM-EP1502 Controller Based on the intelligent Mercury Access Foundation, the Access Platform CKM-EP1502 platform uses an Ethernet link to connect to a Windows-based P2000 host to provide access control, alarm management, and scheduled operations, all in one package. With native connectivity, the CKM-EP1502 platform functions independently of the host, controlling access, managing alarms, and interfacing with an array of reader technologies through its Wiegand, magnetic stripe, and biometric RS-485 connectivity. The result is the flexibility, versatility, and reliability you need for system success. Alarm Management capabilities include standard or customized end-of-line resistances; programmable sensitivity and hold time for line conditioning; entry delay latching and unlatching options; and entry-exit delays. Figure 6: CKM-EP1502 Intelligent Controller Application Notes The Access Platform CKM-EP1502 is the intelligent cornerstone of an access system, providing support for two readers and the capacity to expand to up to 64 doors. Reliably distributing intelligence, the CKM- EP1502 ensures that activities generated by select devices can be related to other devices for continued actions without host intervention. Benefits System intelligence decentralized Two-door interface with auxiliary I/O Scalable to 64 doors Features Multi-card format support Multi-reader technology support TLS encryption support between P2000 server and controller HSPD 12 and FIPS 201 compliant UL 294 recognized Alarm keypad support Technical s Table 10: CKM-EP1502 Controller s Primary Power 12-24 VDC +/- 10%, 500 ma maximum Ethernet/Serial Ports Inputs Outputs Reader Ports Power Keypad LED Buzzer Dimensions Primary 10/100 Ethernet Port 1: RS-232 Port 2: RS-485, 2-wire 8 general purpose: programmable circuit type; Two dedicated: tamper and power monitor 4 relays: Form C, 5 A at 30 VDC 2 reader ports Unregulated pass through (150 ma maximum); Signaling Card/Data, Wiegand, or RS-485 Multiplexed with card data Two-wire or one-wire bicolor support Only with one-wire LED 6.0 in. W x 8.0 in. L x 1.0 in. H (152 mm W x 203 mm L x 25 mm H) Temperature Operational: 0 to 50 C Storage: -55 to 85 C Humidity 10 to 85% RHNC 9

CKM-EP1502 Architecture Diagram P2000 Server P2000 Workstation CKM-MR51E Door 1 IP Network Door 1 Door 2 CKM- EP1502 Wide Area Network Door 1 Door 1 RS-485 Door 2 CKM-MR52 CKM-MR50 CKM-MR16in CKM-MR16out General Purpose Inputs (16) Dedicated Inputs (2) Relay Outputs (2) Relay Outputs (16) Dedicated Inputs (2) Scalable to 64 Doors Figure 7: Architecture Diagram of the CKM-EP1502 Controller 10

Technical Features Table 11: CKM-EP1502 Technical Features Feature Description Connectivity Primary Port: 10/100 Ethernet; RS-232, Dial-up Door Control Two reader ports: Mag, Wiegand, or RS-485; Eight supervised inputs, four relays. Diagnostic LEDs Access Control 250,000 cardholder capacity 50,000 transaction buffer 32 access groups per cardholder 18-digit (63-bit) UserId and 9-digit PIN numbers maximum Activation/Deactivation dates Card Formats 8 active card formats per CKM-EP1502 PIV-II, CAC, and TWIC card compatible Anti-passback support Reader-based or time-based access control Alarm Management Normally open/closed, unsupervised, supervised. Standard or custom end-of-line resistances. Standards 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. EP1502 Ordering Information Table 12: Ordering Information Part Number Description CKM-EP1502 CKM-EP1502 Mercury network controller Related Documentation Table 13: Related Documentation Document Title Document Number Mercury CKM-EP1502 Controller Hardware Installation Manual Part No. 24-10707-15 P2000 Software User Manual Part No. 24-10685-157 CKM-EP2500, CKM-EP1502, and CKM-EP1501 Mercury Network LIT-1900829 Controllers Catalog Page 11

CKM-EPxxxx Controller Comparison Matrix Table 14: CKM-EPxxxx Controller Comparison Matrix /Feature CKM-EP2500 CKM-EP1502 CKM-EP1501 Primary Power 12-24 VDC 12-24 VDC 12 VDC Power Over Ethernet No No Yes Battery Coin cell, Field replaceable Coin cell, Field replaceable Rechargeable, Not field replaceable Onboard Inputs 2 dedicated (tamper and power monitor) 8 general purpose, 2 dedicated (tamper/power monitor) 2 general purpose, Dedicated tamper Onboard Outputs 0 4 relays 2 relays Onboard Readers 0 2 reader ports 2 reader ports (first reader port could be used instead for downstream RS-485 communications) Reader Port Voltage N/A 12-24 V or 12 V 12 V Dual Path Support (IP Redundancy) Yes Yes No Support Lantronix Micro125 Downstream RS-485 Ports Yes (plugs directly onto controller) No No 2 1 1 (replaces first reader port) Card DB Memory 15 Mb 6 Mb 6 Mb Real-Time Clock Yes Yes No ASSA ABLOY Aperio Yes No No RS-485 Hub (Up to 8) Support Schlage Yes No No PIM400 (Up to 16) Maximum Number of 64 64 17 Readers Maximum Number of 64 64 16 Supervised Inputs/Outputs (SIOs) Maximum Number of CKM-MR51e modules 32 32 16 12

Access Platform CKM-MR51e IP Reader Interface Module The Access Platform CKM-MR51e is a networkconnected, single-door, power-over-ethernet (POE) capable interface module that provides an ideal integration solution with the P2000 SMS. Two reader ports support separate in/out readers of all types and technologies, including Wiegand, clock and data, magnetic stripe, keypads, LCD, and biometrics. Auto-addressable and directly managed by the CKM-EP2500, CKM-EP1501, and CKM-EP1502 Mercury intelligent controllers, the CKM-MR51e is capable of elaborate processes and procedures without host intervention. Application Notes Built on the Access Platform, the CKM-MR51e relates the activities of selected system devices to other devices within the system, generating actions and allowing activities to transpire independent of the host. The CKM-MR51e s support of paired readers enhances the ability to meet installation challenges, such as placing readers at varying heights or distances to accommodate ingress and egress of handicapped, vehicle, or foot traffic. These readers can be logically linked together, yet function independently when access identification is presented to either one. When access rights are granted, the same relay functions, as programmed, to unlock the opening. Benefits Flexible, versatile support of paired readers Network ready Easily installed Support of a wide range of reader technologies Features Multi-facility code support Multi-reader technology support PoE enabled Auto-addressable TLS encryption support HSPD 12 and FIPS 201 compliant Figure 8: CKM-MR51e Reader Interface Module UL 294 recognized Technical s The interface is for use in low-voltage, Class 2 circuits only. Table 15: CKM-MR51e Reader Interface Module s (Part 1 of 2) Power Input PoE Power Input 12.95 W, compliant to Institute of Electrical and Electronics Engineers (IEEE) 802.3af (or 10 to 14 VDC power supply) Power Output 12 VDC at 700 ma, including reader and AUX output Output: Form-C contacts: K1, K2: 5 A at 28 VDC Inputs: 4 supervised, End-of-Line resistors, 1k/1k - ohm,1% 1/4 W standard Reader Interface Communication Reader Power: 12 VDC ± 10% or pass through. (PTC limited 150 ma maximum) Reader LED Output: TTL compatible, high > 3 V, low < 0.5 V, 5 ma source/sink maximum Buzzer Output: Open collector, 5 VDC open circuit maximum, 10 ma sink maximum Reader Data Inputs: TTL-compatible inputs or 2-wire RS-485 Ethernet, 10Base-T/100Base-TX 13

Table 15: CKM-MR51e Reader Interface Module s (Part 2 of 2) Cable Requirements Power: 18 AWG, 1 twisted pair RS-485: 24 AWG, 120-ohm impedance, twisted pair with shield, 4,000 feet (1,219 m) maximum Alarm Inputs: 1 twisted pair per input, 30-ohm maximum Reader Data (TTL): 18 AWG, 6 conductors, 500 feet (150 m) maximum Reader Data (RS-485): 24 AWG, 120-ohm impedance, twisted pair with shield, 2,000 feet (1,219 m) maximum Mechanical Dimension: 5.5 in. W x 2.75 in. L (140 mm W x 70 mm L) Weight: 4.2 oz. (120 g) without bracket Temperature Operational: 0 C to 50 C Storage: -55 C to 85 C Humidity 10% to 85% RHNC Standards 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. MR51e CKM-MR51e Architecture Diagram P2000 Server P2000 Workstation IP Network Wide Area Network CKM- MR51e CKM-EP2500/ 1501/1502 Controller CKM- MR51e 2 Relay Outputs 4 Supervised Inputs Reader 1 Reader 2 General Purpose I/O Support 1 Door with 2 Reader Support Figure 9: Architecture Diagram of the CKM-MR51e Reader Interface Module 14

Ordering Information Table 16: Ordering Information Part Number Description CKM-MR51e CKM-MR51e Mercury IP reader interface module Related Documentation Table 17: Related Documentation Document Title Document Number CKM-MR51e Mercury PoE Module Hardware Installation Manual Part No. 24-10707-58 P2000 Software User Manual Part No. 24-10685-157 Mercury Reader Interface Modules Catalog Page LIT-1900830 Access Platform CKM-MR50 The Access Platform CKM-MR50 is a low-cost, highperformance, single card reader interface module capable of all the I/O needed for controlling a single door. Each CKM-MR50 supports one card reader, two general purpose input monitor points, and two control relays to provide access control and security monitoring through a Mercury EP intelligent controller. The CKM-MR50 s reader port supports magnetic stripe, Wiegand, and RS-485 readers, including keypads and integrated keypad readers. Hardware interface and card format settings are loaded through software commands. With its compact footprint and RS-485 connectivity, the CKM-MR50 can be clustered (multiple devices in an enclosure) or distributed (standalone) to best suit the installation environment. The inputs and the relays may be assigned to doorrelated functions or to general purpose I/O. The inputs support normally open, normally closed, supervised, and non-supervised circuits. End-of-line (EOL) resistance values are configurable. The relays can be configured for fail safe or fail secure operation. Application Notes The CKM-MR50 is a versatile, reliable interface module for a single door. When connected to a Mercury EP intelligent controller, the CKM-MR50 passes access request and status change information to the intelligent controller for processing. Data and activities from selected system devices pass to other devices in the network, generating actions and activities as they transpire, independent of the host computer. Even when not connected to an intelligent controller, the CKM-MR50 is capable of locally processing access requests based on facility code verification. Up to eight facility codes may be active in each CKM-MR50. Figure 10: CKM-MR50 Reader Interface Module Benefits Provides all I/O needed for single door control Easily connects to Mercury s EP intelligent controllers Small size versatility Features 2 programmable inputs; 2 programmable relay outputs Multi-facility code support Multi-reader technology support TLS encryption support HSPD 12 and FIPS 201 compliant UL 294 recognized 15

Technical s Table 18: CKM-MR50 Technical s Electrical Primary Power: 12-24 VDC +/- 10%, 150 ma maximum 12 VDC at 110 ma nominal 24 VDC at 60 ma nominal Communication RS 485, 2-wire, 4,000 feet (twisted pair with shield, Belden 9841) Reader Port 1 Reader Port Power: Input voltage pass through Data Card/Keypad, Clock/Data, Data 1/Data 0, or RS-485 LED One-wire, or two-wire bi-color LED support Buzzer Only with one-wire LED Inputs 2 general purpose (programmable circuit type) 1 dedicated (tamper) Output Relays Relay 1: Form C, 5 A 30 VDC Relay 2: Form C, 1 A 30 VDC Dimensions 2.75 in. L x 4.25 in. W x 1.0 in. H, (70 mm L x 108 mm W x 25.4 mm H) Temperature Operational: 0 to 50 C Storage: -55 to 85 C Humidity 10 to 85% RHNC Standard 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. MR50 16

CKM-MR50 Architecture Diagram P2000 Server P2000 Workstation IP Network Wide Area Network CKM-EP2500/1501/1502 Controller RS-485 CKM-MR50 CKM-MR50 Reader 1 2 Relay Outputs 2 Supervised Inputs General Purpose I/O Support Ordering Information 1 Door with 1 Reader Support Figure 11: Architecture Diagram of the CKM-MR50 Reader Interface Module Table 19: Ordering Information Part Number Description CKM-MR50 CKM-MR50 Mercury reader interface module Related Documentation Table 20: Related Documentation Document Title Document Number CKM-MR50 Mercury Terminal Module Hardware Installation Manual Part No. 24-10707-51 P2000 Software User Manual Part No. 24-10685-157 Mercury Reader Interface Modules Catalog Page LIT-1900830 17

Access Platform CKM-MR52 The CKM-MR52 is a low-cost, high-performance reader interface module that provides all the I/O needed for controlling two doors with auxiliary point control and monitoring. Each unit provides out-board flexibility to connect a Mercury intelligent controller. The CKM-MR52 supports two card readers, eight general purpose input monitor points, and six control relays when connected to a Mercury EP Series intelligent controller. With two-wire RS-485 connectivity, the CKM-MR52 s two reader ports support magnetic stripe, Wiegand, and RS-485 readers, including keypads and integrated keypad readers. The inputs and the relays may be assigned to doorrelated functions or to general purpose I/O. The inputs support normally open, normally closed, supervised, and non-supervised circuits. End-of-line (EOL) resistance values are configurable. The relays can be configured for fail safe or fail secure operation. Application Notes The CKM-MR52 is a versatile and reliable reader interface module for two doors. When connected to a Mercury EP intelligent controller, the CKM-MR52 passes access requests and status change information to the controller, processing data and activities from selected system devices to other devices in the network, generating actions and activities as they transpire, independent of the P2000 host computer. Even when not connected to an intelligent controller, the CKM-MR52 is capable of locally processing access requests based on facility code verification. Several facility codes may be active in each CKM-MR52. Benefits Affordable flexibility to add 2 doors Reliable support of a wide variety of sensors and control technologies Easy to install Features Multi-facility code support Multi-reader technology support TLS encryption support HSPD 12 and FIPS 201 compliant UL 294 recognized Figure 12: CKM-MR52 Reader Interface Module Technical s Table 21: CKM-MR52 Technical s (Part 1 of 2) Primary Power 12-24 VDC +/- 10%, 550 ma maximum 12 VDC at 450 ma nominal 24 VDC at 270 ma nominal Communication RS 485, 2-wire, 4,000 feet (twisted pair with shield, Belden 9841) Reader Port 2 Reader Ports Power: 12 VDC regulated, 125 ma each reader Data Card/Keypad, Clock/Data, Data 1/Data 0, or RS-485 Keypad 8-bit Mercury, 8-bit Dorado, 4-bit HID LED One-wire bi-color LED support, or two-wire 18

Table 21: CKM-MR52 Technical s (Part 2 of 2) Buzzer Only with one-wire LED Inputs 8 general purpose (programmable circuit type) 2 dedicated (tamper and power monitor) Output 6 relays: Form C, 5 A 28 VDC Dimensions 6.0 in. W x 8.0 in. L x 1.0 in. H (152 mm W x 203 mm L x 25 mm H) Temperature Operational: 0 to 50 C Storage: -55 to 85 C Humidity 10 to 85% RHNC Standard 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. MR52 19

CKM-MR52 Architecture Diagram P2000 Server P2000 Workstation IP Network Wide Area Network CKM-EP2500/1501/1502 Controller RS-485 CKM-MR52 CKM-MR52 6 Relay Outputs 8 Supervised Inputs Reader 1 Reader 2 General Purpose I/O Support Ordering Information 1 Door with 2 Reader Support Figure 13: Architecture Diagram of the CKM-MR52 Reader Interface Module Table 22: Ordering Information Part Number Description CKM-MR52 CKM-MR52 Mercury reader interface module Related Documentation Table 23: Related Documentation Document Title Document Number CKM-MR52 Mercury Terminal Module Hardware Installation Manual Part No. 24-10707-66 P2000 Software User Manual Part No. 24-10685-157 Mercury Reader Interface Modules Catalog Page LIT-1900830 20

Access Platform CKM-MR16in The CKM-MR16in is a multi-device interface module providing the ability to monitor high concentrations of inputs together with a low requirement for output control. Based on the intelligent Mercury Access Foundation, the CKM-MR16in is capable of supporting 16 general purpose input circuits, which can be individually set for normally open or normally closed operations, and can be declared supervised and non-supervised. Individually configurable parameters can be set for sensitivity ranges, timing parameters, and end-of-line resistance values. Two programmable relay outputs can be configured for fail safe or fail secure operation, supporting On, Off, Pulse, and Repeating Pulse commands. With these powerful control-point capacities onboard, the CKM-MR16in is capable of input-output linking (that is, controlling outboard devices and being activated by the condition of selected system devices locally or regionally) without host intervention. Application Notes The CKM-MR16in is an integral component to support Mercury s flexible, building-block approach to access control system design. The CKM-MR16in provides the capacity to link, control, and respond to an array of sensors. And with its RS-485 connectivity, it and can be clustered (multiple devices in an enclosure) or distributed (standalone) to best suit each installation environment. Figure 14: CKM-MR16in Input Module Benefits Built-in capacity to control and respond to external device commands Easily integrates lighting, heating and cooling, door, or elevator control sensors Initiate commands by operator, time schedules, or events Features 16 programmable inputs; 2 programmable relay outputs 2-wire RS-485 communication TLS encryption support Configurable input parameters Compatible across Mercury s intelligent controller families 21

Technical s Table 24: CKM-MR16in Technical s Electrical Primary Power: 12-24 VDC +/- 10%, 350 ma maximum 12 VDC at 300 ma nominal 24 VDC at 220 ma nominal Communication RS 485, 2-wire, 4,000 feet (twisted pair with shield, Belden 9841) Inputs 16 general purpose (programmable circuit type) 2 dedicated (tamper and power monitor) Outputs 2 relays (Form C, 5 A at 28 VDC) Dimensions 6.0 in. W x 8.0 in. L x 1.0 in. H (152 mm W x 203 mm L x 25 mm H) Temperature Operational: 0 to 50 C Storage: -55 to 85 C Humidity 10 to 85% RHNC Standards 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. MR16in 22

CKM-MR16in Architecture Diagram P2000 Server P2000 Workstation IP Network Wide Area Network CKM-EP2500/1501/1502 Controller RS-485 CKM-MR16in 16 Supervised Inputs 2 Relay Outputs General Purpose I/O Support Figure 15: Architecture Diagram of the CKM-MR16in Input Module Ordering Information Table 25: Ordering Information Part Number Description CKM-MR16in CKM-MR16in Mercury input module Related Documentation Table 26: Related Documentation Document Title Document Number CKM-MR16in Mercury Terminal Module Hardware Installation Manual Part No. 24-10707-74 P2000 Software User Manual Part No. 24-10685-157 Mercury Input/Output Interface Modules Catalog Page LIT-1900835 23

Access Platform CKM-MR16out The Access Platform CKM-MR16out is a multi-device interface panel that provides the ability to control high concentrations of outputs. With 16 general purpose outputs as Form C relay contacts, the CKM-MR16out interfaces with Mercury s EP intelligent controllers to add versatility to access control and security monitoring systems. Based on the intelligent Mercury Access Foundation, the CKM-MR16out can be configured to control a variety of outboard devices for general facility control such as lighting, heating and cooling, door, and elevator control. Devices can be activated by the condition of selected system devices locally or regionally without host intervention. The CKM-MR16out provides individually configurable parameters to be set for timing and for fail safe or fail secure modes. Relay operation may be initiated by direct operator commands, by time schedules, or by event-based procedures. The relays support On, Off, Pulse, and Repeating Pulse commands. Application Notes The CKM-MR16out is an essential component to support Mercury s flexible, building block approach to access control system design. Providing flexibility and versatility, the CKM-MR16out offers unmatched power to widen the range of devices and building controls that can be included in system design. Add building controls such as lighting or HVAC, with devices activated locally or regionally without host intervention. Table 27: CKM-MR16out Technical s Figure 16: CKM-MR16out Output Module Benefits Built-in capacity to control and respond to external device commands Easily integrates lighting, heating and cooling, door, or elevator controls Initiates commands by operator, time schedules, or events Features TLS encryption support Power supervision and tamper monitoring Compatible with all CKM-EP Mercury controllers Technical s Electrical Primary Power: 12-24 VDC +/- 10%, 1100 ma maximum 12 VDC at 850 ma nominal 24 VDC at 450 ma nominal Communication RS 485, 2-wire, 4,000 feet (twisted pair with shield, Belden 9841) Inputs Outputs 2 dedicated (tamper and power monitor) 16 relays (Form C, 5 A at 28 VDC) Dimensions 6.0 in. W x 8.0 in. L x 1.0 in. H (152 mm W x 203 mm L x 25 mm H) Temperature Operational: 0 to 50 C Storage: -55 to 85 C Humidity Standards 1 10 to 85% RHNC CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. MR16out 24

CKM-MR16out Architecture Diagram P2000 Server P2000 Workstation Wide Area Network IP Network CKM-EP2500/1501/1502 Controller RS-485 CKM-MR16out 16 Relay Outputs Ordering Information Table 28: Ordering Information General Purpose Output Support Figure 17: Architecture Diagram of the CKM-MR16out Output Module Part Number CKM-MR16out Description CKM-MR16out Mercury output module Related Documentation Table 29: Related Documentation Document Title Document Number CKM-MR16out Mercury Terminal Module Hardware Installation Manual Part No. 24-10707-82 P2000 Software User Manual Part No. 24-10685-157 Mercury Input/Output Interface Modules Catalog Page LIT-1900835 25

DM-21 Intrusion Display The DM-21 Mercury intrusion display provides an interactive link to the P2000 Security Management System, enabling system operators to perform various intrusion-related tasks. The DM-21 displays text as sent by the controller, providing alarm status feedback or other freeform messaging or instructions that the system generates. In a P2000 intrusion application, the DM-21 intrusion display allows operators to arm and disarm areas of the facility, and bypass zones, directly from the device. The P2000 software enables administrators to define and manage logical intrusion components (areas and zones). The DM-21 combines a 32-character LCD display and a multi-position keypad. Even in challenging settings, the backlit LCD yields clear information displays. The keypad features standard numerics and four function keys to select display options.the unit connects to the system via a 2-wire RS-485 link or a TTL connection. Application Notes The DM-21 intrusion display is a core component that provides robust communications functionality within Mercury s building block approach to system design. When combined with Mercury s EP series of intelligent access platforms, the unit brings an interactive link and truly integrated functionality to the terminal, a major plus for end-user convenience and satisfaction. Table 30: DM-21 Technical s Extended User Prompts user for command Commands Echoes back entries Command feedback Primary Power 12 VDC +/- 15%, 175 ma (not including reader power) Serial Port Port 1: 2-wire RS-485 (twisted pair with shield) LED Two wire or one-wire bi-color support Buzzer Only with one-wire LED Keypad 4 x 4, backlit Display 2 lines, 16 characters/line, backlit 7.5 mm character height typical Figure 18: DM-21 Intrusion Display Benefits User-friendly interaction with system Improves overall system ease-of-use For use in a P2000 intrusion application User can perform commands for Intrusion Zones and Intrusion Areas Accessibility to keypad controlled by P2000 Access Groups feature Features 16-position backlit keypad 32-character LCD Static discharge protected UL 294 recognized Technical s 26

Table 30: DM-21 Technical s Dimensions 6.75 in. W x 5.0 in. L x 1.0 in. D (172 mm W x 127 mm L x 25 mm D) Temperature Operational: 0 to 50 C Storage: -20 to 70 C Humidity 10 to 85% RHNC Mounting Surface mount or 3-gang box Standards 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. MRDT Ordering Information Table 31: Ordering Information Part Number Description DM-21 DM-21 Mercury Intrusion Display Related Documentation Table 32: Related Documentation Document Title Document Number DM-21 Intrusion Display Hardware Installation Manual Part No. 24-10707-104 P2000 Software User Manual Part No. 24-10685-157 DM-21 Mercury Intrusion Display Catalog Page LIT-1900836 27

DM-21 Architecture Diagram P2000 Server P2000 Workstation IP Network Wide Area Network CKM- EP1502 CKM-EP2500/1501/1502 Controller RS-485 DM-21 DM-21 DM-21 Figure 19: Architecture Diagram of the DM-21 Intrusion Display 28

Access Platform CKM-MUX-8 Multiplexer The Access Platform CKM-MUX-8 adds flexibility to convert multiple data lines into a single data line to meet difficult system design and installation challenges. Common uses include star topology, wiring schemes, home-run wiring, or when wiring distances exceed the 4,000-foot limit of the RS-485 standard. The CKM-MUX-8 utilizes bus-arbitration logic on a firstcome, first-serve basis and can detect and deactivate a broken channel to protect the integrity of the communications bus. The CKM-MUX-8 is an 8-port multi-device interface panel that provides the flexibility to take RS-485 or RS- 232 wiring inputs to create eight 2-wire RS-485 communication channels. Application Notes The CKM-MUX-8 multiplexer accessories add to a developer s ability to manage divergent system installations. Benefits Conquer difficult installations Guard against ground loop installation issues Flexibly expand data lines Figure 20: CKM-MUX-8 Multiplexer Features Per port voltage isolation Universal system compatibilities across intelligent controller families RS-232 or RS-485 inputs accepted Technical s Table 33: CKM-MUX-8 Technical s CKM-MUX-8 Primary Power DC Input: 12 VDC ± 15%, 250 ma Interfaces Port 1: RS-232/RS-485, selectable Port 3,5,7,9: RS-485, Transmit/Receive Port 2,4,6,8: RS-485, Transmit/Receive, or Receive Only Wire Requirement Power: 1 twisted pair, 18 AWG RS-485: 24 AWG, 4,000 feet (1,200 m) maximum, twisted pair(s) with shield RS-232: 24 AWG, 50 feet (15 m) maximum Temperature Operating: 0 to 50 C Storage: -55 to 85 C Humidity 10 to 85% RHNC Dimensions 5 in. L x 6 in. W x 1 in. H (127 mm L x 152 mm W x 25 mm H) Weight 4 oz (180g) nominal Standards 1 CE FCC, Class A RoHS UL 294 Recognized 1. Qualified as Mercury Security Corp. MUX8 29

CKM-MUX-8 Architecture Diagram P2000 Server P2000 Workstation IP Network Wide Area Network CKM-EP2500/1501/1502 Controller CKM-MUX-8 CKM-MR52 CKM-MR50 CKM-MR16in CKM-MR16out Figure 21: Architecture Diagram of the CKM-MUX-8 Multiplexer Ordering Information Table 34: Ordering Information Part Number Description CKM-MUX-8 CKM-MUX-8 Mercury multiplexer Related Documentation Table 35: Related Documentation Document Title Document Number CKM-MUX-8 Mercury Multiplexer Hardware Installation Manual Part No. 24-10707-90 CKM-MUX-8 Mercury Multiplexer Catalog Page LIT-1900831 30

Security Control Panel Assemblies and Enclosures for Mercury Products Security control panel assemblies enable you to order supported Mercury products in a pre-assembled enclosure that includes the right power supply boards and power distribution modules to safely power Mercury components. These enclosures offer a predesigned solution that saves both time and money. Various models are available to accommodate a variety of common applications. All enclosures come standard with a lock and tamper switch. Security Control Panel Assembly (12 in. x 14 in. Enclosure) for Mercury Products The 12 in. x 14 in. security control panel is a pre-wired, pre-assembled, standard control panel and enclosure that contains the following: CKM-EP1501 network controller or CKM-MR51e IP reader module 75 W power supply Power distribution module Keyed lock Tamper switch Note: For information on the CKM-EP1501 network controller, see Access Platform CKM-EP1501 Controller on page 6. For information on the CKM-MR51e IP reader module, see Access Platform CKM-MR51e IP Reader Interface Module on page 13. Figure 22: Mounting Configurations for 12 in. x 14 in. Enclosure Enclosure Features High grade steel design Pre-punched to accommodate power supply and accessory boards Rear standoffs allow field upgrading without removing cabinet from wall Ample 1/2 in. and 1-1/4 in. knockouts Removable door for easier servicing Cabinets have 4.5 in. depth to fit standard 12 Ah batteries Enclosure s Table 36: 12 in. x 14 in. Enclosure s Cabinet Size 12 W x 14 H x 4.5 D inches (31 W x 36 H x 11.4 H cm) Mercury Mounting Accommodation Maximum Boards with Power Supply and Power Distribution Module Door Mount Option CKM-EP1501, CKM-MR51e 2 75-Watt Power Supply The supplied 75-Watt power supply is an offline switch mode power supply battery charger that provides two outputs, user selectable for 12 or 24 VDC. One output provides continuous output power, and the second is programmable to either fail-safe or failsecure lock operation. Complete fault detection and reporting, with programmable fault delays, is provided along with data logging capability of fault occurrence, battery usage time, and current power supply status. Table 37: Power Supply Electrical Ratings Input Voltage 120/230 VAC Input Power (Maximum) 85 W Output Voltage 12 or 24 VDC Output Current 6 or 3 A Battery Charge Capacity 40 Ah Efficiency 83% Output Ripple 120 mvp-p No 31

Table 37: Power Supply Electrical Ratings Line Regulation 0.1 ±% Load Regulation 2.5 ±% British Thermal Unit (BTU) Rating Continuous Power Outputs 1 Switched Power Outputs 1 33 BTU/Hr Compliance United States: FCC compliant to the limits for a Class A device, pursuant to Part 15 of the FCC Rules Canada: Class A digital apparatus, complies with Canadian ICES-003 Europe: Johnson Controls, Inc, declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive 2004/108/EC Australia and New Zealand: C-Tick, Australia/NZ Emissions Compliant Power Distribution Module The power distribution module adds eight controlled voltage outputs with supervision to the power supply. Each output is programmable to either of the two voltages available when used in a dual voltage power system. Table 38: Power Distribution Module Electrical Ratings Input Voltage 12 and/or 24 VDC Output Voltage 12/24 VDC Current / Output (Class 2 2.5 A Power Ltd) Lock Outputs 8 Supports follow-on modules Yes Ordering Information Table 39: Ordering Information Part Number Description SPE10000-1H00 12 x 14 x 4.5 in. (31 x 36 x 11.4 cm) security control panel assembly that includes a CKM-EP1501 Mercury network controller, 75 W power supply, power distribution module, keyed lock, and tamper switch SPH10000-1H00 CKM-FPO75 CKM-F8P CKM-CE75-E1M 12 x 14 x 4.5 in. (31 x 36 x 11.4 cm) security control panel assembly that includes a CKM-MR51e Mercury IP reader module, 75 W power supply, power distribution module, keyed lock, and tamper switch 75 W power supply board; 3 A at 24 VDC and 6 A at 12 VDC Power distribution module with eight controlled voltage outputs with supervision to the power supply 12 x 14 x 4.5 in. (31 x 36 x 11.4 cm) enclosure with 75 W power supply board Related Documentation Table 40: Related Documentation Document Title Document Number Security Control Panel Assembly Mounted in a 12 in. x 14 in. Enclosure Part No. 24-10708-1 Installation Sheet CKM-CE75-E1M Enclosure with Power Supply Hardware Installation Manual Part No. 24-10707-112 CKM-F8P Network Power Supply Monitor Hardware Installation Manual Part No. 24-10707-147 Security Control Panel Assembly (12 in. x 14 in. Enclosure) for Mercury Products LIT-1900832 Catalog Page 32

Security Control Panel Assembly (16 in. x 20 in. Enclosure) for Mercury Products The 16 in. x 20 in. security control panel is a pre-wired, pre-assembled, standard control panel and enclosure that contains the following: CKM-EP2500 network controller CKM-MR52 reader interface module (SPF1I100-1I00 only) 75 W power supply Power distribution module Keyed lock Tamper switch Note: For information on the CKM-EP2500 network controller, see Access Platform CKM-EP2500 Controller on page 3. For information on the CKM- MR52 reader interface module, see Access Platform CKM-MR52 on page 18. Figure 23: Mounting Configurations for 16 in. x 20 in. Enclosure Enclosure Features High grade steel design Pre-punched to accommodate power supply and accessory boards Rear standoffs allow field upgrading without removing cabinet from wall Ample 1/2 in. and 1-1/4 in. knockouts Removable door for easier servicing Cabinets have 4.5 in. depth to fit standard 12 Ah batteries Enclosure s Table 41: 16 in. x 20 in. Enclosure s Cabinet Size 16 W x 20 H x 4.5 D inches (41 W x 51 H x 11.4 D cm) Mercury Mounting Accommodation Maximum Boards with Power Supply and Power Distribution Module Door Mount Option CKM-EP2500, CKM- EP1501, CKM-EP1502, CKM-MR50, CKM-MR52, and CKM-MR51e 2 75-Watt Power Supply The supplied 75-Watt power supply is an offline switch mode power supply battery charger that provides two outputs, user selectable for 12 or 24 VDC. One output provides continuous output power, and the second is programmable to either fail-safe or failsecure lock operation. Complete fault detection and reporting, with programmable fault delays, is provided along with data logging capability of fault occurrence, battery usage time, and current power supply status. Table 42: Power Supply Electrical Ratings Input Voltage 120/230 VAC Input Power (Maximum) 85 W Output Voltage 12 or 24 VDC Output Current 6 or 3 A Battery Charge Capacity 40 Ah Efficiency 83% Output Ripple 120 mvp-p No Building Efficiency 507 E. Michigan Street, Milwaukee, WI 53202 Metasys and Johnson Controls are registered trademarks of Johnson Controls, Inc. All other marks herein are the marks of their respective owners. 2013 Johnson Controls, Inc. 33 Published in U.S.A. www.johnsoncontrols.com

Table 42: Power Supply Electrical Ratings Line Regulation 0.1 ±% Load Regulation 2.5 ±% BTU Rating 33 BTU/Hr Continuous Power Outputs 1 Table 42: Power Supply Electrical Ratings Switched Power Outputs 1 Power Distribution Module The power distribution module adds eight controlled voltage outputs with supervision to the power supply. Each output is programmable to either of the two voltages available when used in a dual voltage power system. Table 43: Power Distribution Module Electrical Ratings Input Voltage 12 and/or 24 VDC Output Voltage 12/24 VDC Current / Output (Class 2 Power Ltd) 2.5 A Lock Outputs 8 Supports follow-on modules Yes Compliance United States: FCC compliant to the limits for a Class A device, pursuant to Part 15 of the FCC Rules Canada: Class A digital apparatus, complies with Canadian ICES-003 Europe: Johnson Controls, Inc, declares that this product is in compliance with the essential requirements and other relevant provisions of the EMC Directive 2004/108/EC Australia and New Zealand: C-Tick, Australia/NZ Emissions Compliant 34

Ordering Information Table 44: Ordering Information Part Number Description SPF10000-1I00 16 x 20 x 4.5 in. (41 x 51 x 11.4 cm) security control panel assembly that includes a CKM-EP2500 Mercury network controller, 75 W power supply, power distribution module, keyed lock, and tamper switch SPF1I100-1I00 16 x 20 x 4.5 in. (41 x 51 x 11.4 cm) security control panel assembly that includes a CKM-EP2500 Mercury network controller, CKM-MR52 reader interface module, 75 W power supply, power distribution module, keyed lock, and tamper switch CKM-FPO75 75 W power supply board; 3 A at 24 VDC and 6 A at 12 VDC CKM-F8P Power distribution module with eight controlled voltage outputs with supervision to the power supply CKM-CE75-E2M 16 x 20 x 4.5 in. (41 x 51 x 11.4 cm) enclosure with 75 W power supply board Related Documentation Table 45: Related Documentation Document Title Document Number Security Control Panel Assembly Mounted in a 16 in. x 20 in. Enclosure Installation Part No. 24-10708-28 Sheet CKM-CE75-E2M Enclosure with Power Supply Hardware Installation Manual Part No. 24-10707-120 CKM-F8P Network Power Supply Monitor Hardware Installation Manual Part No. 24-10707-147 Security Control Panel Assembly (16 in. x 20 in. Enclosure) for Mercury Products LIT-1900833 Catalog Page 35

Security Control Panel Assembly (20 in. x 24 in. Enclosure) for Mercury Products The 20 in. x 24 in. security control panel is a pre-wired, pre-assembled, standard control panel and enclosure that contains the following: CKM-EP2500 network controller Three CKM-MR52 reader interface modules 150 W power supply Power distribution module Keyed lock Tamper switch Note: For information on the CKM-EP2500 network controller, see Access Platform CKM-EP2500 Controller on page 3. For information on the CKM-MR52 reader interface module, see Access Platform CKM-MR52 on page 18. Figure 24: Mounting Configuration for 20 in. x 24 in. Enclosure Enclosure Features High grade steel design Pre-punched to accommodate power supply and accessory boards Rear standoffs allow field upgrading without removing cabinet from wall Ample 1/2 in. and 1-1/4 in. knockouts Removable door for easier servicing Cabinets have 4.5 in. depth to fit standard 12 Ah batteries Enclosure s Table 46: 20 in. x 24 in. Enclosure s Cabinet Size 20 W x 24 H x 4.5 D inches (51 W x 61 H x 11.4 D cm) Mercury Mounting Accommodation Maximum Boards with Power Supply and Power Distribution Module Door Mount Option CKM-EP2500, CKM- EP1501, CKM-EP1502, CKM-MR50, CKM-MR52, and CKM-MR51e 4 150-Watt Power Supply The supplied 150-Watt power supply is an offline switch mode power supply battery charger that provides two outputs, user selectable for 12 or 24 VDC. One output provides continuous output power, and the second is programmable to either fail-safe or failsecure lock operation. Complete fault detection and reporting, with programmable fault delays, is provided along with data logging capability of fault occurrence, battery usage time, and current power supply status. Table 47: Power Supply Electrical Ratings Input Voltage 120/230 VAC Input Power (Maximum) 170 W Output Voltage 12 or 24 VDC Output Current 12 or 6 A Battery Charge Capacity 80 Ah Efficiency 87% Output Ripple 120 mvp-p Line Regulation 0.1 ±% Load Regulation 2 ±% BTU Rating 66 BTU/Hr Continuous Power Outputs 1 Switched Power Outputs 1 No 36