Ver.A13 www.daylightsavingsnow.com Compatible Ballast Tube DL-T8X120-20W E478575 Product Features The Ballast Compatible Plug & Play LED tube employs patent ballasts compatible circuit, working with Rapid Start,, and most of electronic ballasts on the market ; Double-end Powered and directly replaces 25W/48T8/HF,28W/48T8/HF,30W/48T8/HF,32W/48T8/RS; When ballast is dead, it s also designed to work without ballast, directly powered with 90~277VAC. It s compliant with UL Safety Standard, approved from DLC, UL Listed #E478575. Advantages Compatible with Rapid start,, and most of existing electronic ballasts on the market; Direct replacement of traditional fluorescent T8 tubes, no need to remove the starter & rewire; Directly works well with line voltage 90-277VAC; Work well with one piece or more tubes when driven by one ballast in a parallel circuit; Approved by DLC, UL Listed #E478575, FCC, RoHS etc.; Dimension Ø32 1198mm Ø28 T8-4FT Ø32 Page 1 of 7
Specification Product Name Rated Power Input-voltage Frequency Power Factor Socket Cover Color Temp. Lumens (Nominal) CRI SDCM THD Beam angle Operating Temp. Heat Sink Warranty T8-4FT-20W-CNA (LED-TUBE3) 20W 100~277VAC 50/60Hz >0.95 G13 Clear/Frosted/Striped clear 3000K 4000K (DLC) 5000K (DLC) 6500K 2200LM 2400LM 82 5.0 <18% 180-25 ~+40 Aeronautical aluminum #6063 5 years Remark: Luminous Flux 10% tolerance CCT And SDCM 3000K 4000k 5000K 6500k Page 2 of 7
Typical Intensity Distribution Indoor Luminance Limiting Curve Rectangle ISO Light Intensity Curve Illuminance-Distance Curve Illuminance-Distance Curve Page 3 of 7
Typical Compatible Ballasts (North America) NO# Brand Model No. Ballast Type Lamp Type Ballast Input Voltage 1 2 3 4 5 ACCUPRO AP-RS-232IS-120 120V 0.31A 60Hz 6 DEAN HFE-232-120-IS-LPF 7 8 9 10 11 12 13 14 15 16 17 18 ACCUPRO ACCUPRO ACCUPRO GE PROLINE GE PROLINE KEYSTONE LIGHTPARK OSRAM SYLVANIA PHILIPS PHILIPS PHILIPS ULTRASAVE AK-RC-232IP-UNV AP-RC-432IP-120-1 AP-RC-232IP-120-1 IIC-2S32-SC GE232-N-347 GE332MV-N-DIY KTEB-132-1-TP-EMI 120-2/32IS MPF QTP 1X32T8/UNV ISN-SC REB-2P32-SC RELB-1S40-SC RELB-2S40-SC UT 432347 Rapid Start Rapid Start (4)F32T8 (4)F25T8 (4)F17T8 (3)F32T8 (3)F28T8 (3)F17T8 1xFO32T8 1xFO25T8 1xFO17T8 (1)F40T12 (1)F34T12 (2)F40T12 (2)F34T12 (2)F40T12 (2)F34T12 F32T8 F25T8 F17T8 (3/4)F32T8 (3/4)F28T8 (3/4)F17T8 120/277V 0.50.22/A 50/60Hz 120V 0.97A 60Hz 120-277V 0.51A 50/60Hz 100-277V 0.74A 50/60Hz 120V 0.89A 60Hz 100-277V 0.26A 50/60Hz 120V 0.8A 60Hz 120V 0.31A 60Hz 120V 0.62A 60Hz TOUVE 120-2G 32EC (2)32T8 120V 0.65A 60Hz TRAID 100-277V 0.26A 50/60Hz B232IUNVHP-B ULTRASAVE et232120m 120-277V 0.49A 50/60Hz 347V 0.32A 50/60Hz Note1: The ballast items listed above represent some typical brands' models. Our tubes also work well with those ballasts which shar the same working principle exemplified above. We do not guarantee that our product works well with all existing ballasts in the marke Note2: Brightness and Power output may vary depending on the ballast. These differences do not affect product's normal use. Note3: If you connect tubes directly to 100~277Vac, please follow wiring diagram in page 5. Page 4 of 7
Wiring Diagram( Line Voltage AC90-277V) L( Either Pin) N(Either Pin) Wiring Diagram 1 L( Either End) N(Either End) Wiring Diagram 2 L N Wiring Diagram 3 L( Either End) N(Either End) Wiring Diagram 4 Page 5 of 7
Application Application: Used for indoor commercial and residential lighting, such as office buildings, warehouse,shopping malls, schools, hospital etc. Warning: 1 Do not use tubes in a closed fixture or under damp environment; 2 lease use recommended lighting fixture and electronic ballast; 3 Do not use for safety lamp or emergency lamp. Installation 1 2 3 4 off Remove fluorescent tube Fit on LED tube on OFF ON Page 6 of 7
Decay curves Lumen flux(%) Time(hours) Packaging Packaging 1 Packaging 2 Net Weight/Tube: 0.35kg/pc Qty: 25pcs/carton Gross Weight/Carton:10.3kg Carton Size: L1265mm*W210mm*H235mm Page 7 of 7