34 BERLIN High quality and elegance à from the doorplate to the outdoor stand the lightly arched front characterizes all elements of the collection. Whether outdoor or indoor totem, floor directories, ceiling hangers, banners or doorplates: is always an elegant and particularly representative eye catcher. Information is quickly and simply updated and replaced with the refined door mechanism. aluminium convex paperflexible user-friendly High-quality, simple and elegant yet functional and particularly adaptable through the variety of colours is one of the most successful orientation systems in our range of products.
35
Series TO U SE E A DY BERLIN R 36 Outdoor Stand - ready for assembly An inviting placement - The outdoor stand captivates with its extreme stability together with its elegant design. Technical data: The cold rolled sign information surface made from 3 mm aluminium compound (RAL 9016 traffic-white or RAL 9006 white-aluminium as standard) is firmly attached to the aluminium base profiles at the side. The additional cover profiles (painted in F1 - F16 or F18 in anodized silver E6/ EV1) ensure clear optics. The 150 mm high base is usually delivered in the same colour as the posts. If the height of totem is more than 3150 mm, the area for information is split and connected with an H-section. The sign information is applied with self-adhesive plotter letters or digital printing. The outdoor totem are supplied fully assembled with side posts which are 350-500 mm longer as standard. Information about the foundation plan and structural calculations can be found on page 198. up to 5,15 meters information area 150 x 1000 650 x 1000 3150 x 1000 000 x 850 500 x 850 3000 x 850 150 x 150 650 x 150 3150 x 150 3150 x 1500 4150 x 1500 5150 x 1500 wlz RAL 9016 traffic-white RAL 9006 silver i1501 * i150 * i1503 i1501f18 * i150f18 * i1503f18 000 x 1100 500 x 1100 3000 x 1100 i1601 i160 i1603 i1601f18 i160f18 i1603f18 3000 x 1350 4000 x 1350 5000 x 1350 1 i1703 i1705 ** i1707 ** i1703f18 i1705f18 ** i1707f18 ** Individual painting and sizes upon request. wlz = wind load zone inland (basis for assessment). * Totems can also be supplied with a base plate for screwing to footings as an alternative. ** Lettering panel ist divided in parts; incl. reinforcing profile 60 x 60 x 6 mm, galvanized steel. BESTSELLER
Series Spotlights For outdoor use, incl. illuminant. Please have a look on page 18 for detailed information. name LED lighting small LED lighting wide LED flood light Ground spotlight 40 LED Floor large LED Floor extra large LED-Solar lighting FIX LED-Solar lighting MOVE * visible format installation depth in mm in mm 46 x 10 65 x 340 x 180 40 x 40 90 x 650 65 x 1000 6 x43 40,5 x 10,5 50 350 83 70 80 80 134 3 up to the height og output m,5 m,5 m,5 m 6m 6m m m 6x3W 16 x 6 W 8x3W 70 W 1 W 15 W,4 W 4W iled1 iled iled3 ibs40 * iled4l iled4xl iledsolar1 iledsolar aluminium base profile (3 mm) Discontinued line - while stock lasts. information area surface made of cold-rolled-to-shape composite panel - RAL 9016 traffic-white - RAL 9006 silver happy ill be We w ice you! v to ad 00 5-1 60 96 +49 cover profile 37
38 Series BERLIN Indoor Stand - paperflexible Extraordinary by style - the indoor stand aids orientation or displays varying information. Technical data: The edge rails at the side are silver anodized. The anti-reflective swing door made of mm transparent plastic can be released on both sides and opened using a bolt on the side thereby giving access to the information area (white RAL 9016). In order to make unauthorized access difficult the bolt can be fixed with a screw. The base and the plate are in RAL 9007 grey aluminium according to the standard. paper size visible information area 100 x 440 100 x 610 000 x 40 000 x 594 000 x 406 000 x 576 i114f18 i1314f18 slider to open the door convex label area with anti-glare screen Sign information The sign information can be applied either with plotter lettering, paper inlay or digital printing. Open the door on the doorplate by lifting the slide at the side after turning the plastic screw outwards. The sign information can now be inserted. Close the door with the slide and turn the locking screw in again slightly if you require additional protection against unauthorized access. side aluminium profile silver anodized base grey ground plate grey
Series Suspended Sign - direct print The edge rails are painted RAL 9006 silver. The double-sided lettering area is painted RAL 9016 white. Delivery includes x 1.5 m steel cord (assembled) and press-on lugs. information area 148 x 35 10 x 60 97 x 865 148 x 97 10 x 594 97 x 840 i110f18 i130f18 i140f18 accessories automatic unit instead of hooks i773 Two automatic units are required per sign. The automatic unit is described on page 190. Installation and sign information In this case the sign information is applied directly to the area for information using self-adhesive foil letters, digital printing or emergency / fire safety symbols. The sign can be fastened to the ceiling either with conventional hooks or an automatic ceiling fastening system. The automatic device permits the sign to be adjusted retroactively so that if it is not straight or there are any differences in the length of the cord, these can be corrected with ease. hooks automatic unit 39
40 Series BERLIN Projecting Sign - direct print, paperflexible This sign can be used double-sided. Edge rails are in RAL 9006 silver or silver anodized. The lettering is effected either directly onto the lettering panel (white RAL 9016), e.g. in form of emergency / fire safety symbols or by using paper inlays. Installation and sign information information area Direct labeling 148 x 180 148 x 35 148 x 148 148 x 97 i1003f18 i1103f18 paperflexible 148 x 148 144 x140 i1051f18 BESTSELLER The adapter consists of a mounting base profile and an adapter profile in anodized silver. The base profile is attached to the wall using two screws. A grub screw at the side secures the slid over adapter, on which the signs are attached on both sides. Directory for wall mounting - direct print This sign can be used double-sided. Edge rails are in RAL 9006 silver or silver anodized. The lettering is effected either directly, e.g. in form of emergency / fire safety symbols or by using paper inlays. Installation and sign information Concealed installation: The holes are covered by the edge rails. The sign information is applied directly to the sign information surface in the form of self-adhesive foil letters or fire safety or escape route symbols. information area 148 x 35 10 x 60 97 x 450 148 x 97 10 x 594 97 x 40 i1104f18 i1316f18 i117f18
Series Directory for wall mounting - paperflexible Paperflexible in all formats - the cover with the door mechanisme enables the directory to display varying information even in large formats. Technical data: The lettering panel is RAL 9016 traffic-white. The edge rails are silver anodized according to the standard. paper size visible lettering area 97 x 30 97 x 10 (DIN A4 ver.) 97 x 196 i1001f18 10 x 30 40 x 30 1000 x 30 10 x 97 (DIN A4 hor.) 40 x 97 (DIN A3 ver.) 1000 x 97 10 x 86 40 x 86 1000 x 86 i1100f18 i1101f18 i1107f18 97 x 440 594 x 440 1000 x 440 000 x 440 97 x 40 (DIN A3 hor.) 594 x 40 (DIN A ver.) 1000 x 40 000 x 40 97 x 406 594 x 406 1000 x 406 000 x 406 i101f18 i105f18 i107f18 i11 F18 40 x 610 841 x 610 1000 x 610 000 x 610 40 x 594 (DIN A hor.) 841 x 594 (DIN A1 ver.) 1000 x 594 000 x 594 40 x 576 i1304f18 i1305f18 i1307f18 i131f18 1189 x 850 1189 x 841 (DIN A0 ver.) 1000 x 576 000 x 576 BESTSELLER i1409f18 Installation and sign information The sign is installed using two screws, on which the sign is hung by the two holes. After it has been aligned (see ), the cross strut at the bottom should be glued to the wall to prevent unauthorized removal. 1 slider to open the door Once the sign has been fitted to the screws (see 1), align the sign using the device at the top with the help of an Allen key. 41
4 Series BERLIN Door Sign for wall mounting - paperflexible High-quality and elegant the lightly arched front face makes the a particularly representative eye-catcher. The mounting is hidden and paper inlays can be produced easily. A hidden side notch holds the cover in place and prevents it from being removed by unauthorized persons and can only be removed with a suction pad. information area 148 x 110 (DIN A6) 148 x 148 10 x 148 (DIN A5) 144 x 100 144 x 140 06 x 140 i1000f18 i1148f18 i1105f18 BESTSELLER Assembly sign base aluminium paper inlay 1 To remove the mounting plate, unscrew the locking screw at the bottom. The mounting plate can be fastened to the wall with either one (hole in the middle) or two screws*. To make it easier to install, the sign is self-adhesive at the back. non-reflective PVC cover 4 3 Once the mounting plate has been fastened, the doorplate itself can then be fitted back on again. * Lock the sign in place with the locking screw to complete installation. Assembly material for wall mounting (screws and dowels) not included in delivery.
Series Universal Display free engaged name Universal display free engaged iuniversalfb See page 19. Paper Inlays Inserting the sign information Paper inlays are supplied in RAL 900 pure white as standard, blank for self-printing with a laser or ink-jet printer. format PU 1 Remove the PVC cover by pressing the supplied suction cap onto the panel and pulling the cover towards you. When inserting the sign information, make sure that the hole in the paper inlay fits in the holding pin at the top on the right. This guarantees correct positioning and prevents unauthorized removal. 3 Once the paper has been inserted, first insert the cover in the holding pin on the right to get the right position and prevent unauthorized removal. 4 Then close the door sign by pushing the cover into the profile on the left hand side. * 144 x 105 for door sign i1000 i1000p50 * i1000p10 * 50 sheets 10 sheets 144 x 144 for door sign i1148 and flag sign i1051 i1148p50 * i1148p10 * 50 sheets 10 sheets 06 x 144 for door sign i1105 i1105p50 * i1105p10 * 50 sheets 10 sheets 97 x 10 40 x 97 for sign DIN A4 for sign DIN A3 i97x10p10 i40x97p5 10 sheets 5 sheets Punched on DIN A4 sheet. Accessories/Pictograms Design templates incl. pictograms and free installation file Inkscape ivorlagen Extract from a wide range, please refer to page 194 onwards. For a selection of emergency / fire safety symbols, please refer to www.moedel.de. For sign information in Braille / tactile lettering, please refer to page 178 onwards. 43