Chapter 5 SHELF STOPPER Perforated labels clamp page 70 Super gripper T page 72 Fla g s page 74 The promotions, special offers or price reductions must be always announced at the shelf by visible posting of different kind of messages. These small colored and aggresive postings have been called shelf stoppers. Meaning something that should stop the customer and catch his attention for at least few seconds. In this chapter we will present you some technical solutions which have proven their efficiency in time, having various forms and colors, with adhesive or magnet, with clamping on various existent standard structures, mobile or fixed.
Stopper made of rigid polystyrene with upper fixing on label holder profiles, 39 mm for prints with a maximum thickness of 0,6 mm. Colors: clear. FPP 019-01 0.27 EU R / PC Stopper made of rigid polystyrene with low fixing on label holder profiles for prints with a maximum thickness of 0,6 mm. Colors: clear. FPP 075-01 0.27 EU R / PC D Stopper. To be attached on 30 and 39 mm scanning rails, with closing clamp to better hold the label. The printed label must be under 1 mm thickness and the hole of 2 mm is placed at 12 mm from the edge. Color: clear. LPP 076-01 25.08 EUR / 100PCS Stopper made of rigid polystyrene, fixing inside the scanning rail. The label (not included) can have max thickness of 1 mm, 5 mm hole. For more stability we can insert a small transparent soft bumper (not included). Color: clear. model H, for 39 mm profiles, hole at 10 mm from the edge LPP 063-01/39 28.6 EUR / 100PCS model H, for 52 mm profiles, hole at 10 mm from the edge LPP 063-01/52 28.6 EUR / 100PCS model M, for 39 mm profiles, hole at 12 mm from the edge LPP 075-01/39 28.6 EUR / 100PCS model M, for 52 mm profiles, hole at 12 mm from the edge LPP 075-01/52 28.6 EUR / 100PCS Stopper with fixing on shelf with C edge, parallel and / or rectangular print attaching. Color: white. For C shelf of 37 mm width PAP 001-03 11.77 EUR / 100PCS For C shelf of 45 mm width PAP 002-421 13.4 EUR / 100PCS Stopper with spring, adhesive round pads Ø 19 mm. Colors: white. LPX 024-03 34.21 EUR / 100PCS Stopper with spring, adhesive square pads 20x20 mm. Colors: white. LPX 001-03 34.21 EUR / 100PCS 70 70
Self-adhesive shelf wobbler made from clear PVC, thickness 0,2 mm, length 75 mm, adhesive pads sizes 12,5x12,5 mm, width 5 mm. It can be also used for suspending products on hooks. LPP 020-434 6.36 EUR / 100PCS 1:1 Plastic stopper made in one piece, 2 round pads foam adhesive Ø 16 mm, 30 mm connection in between. LPX 058-03 21.89 EUR / 100PCS 1:1 Aluminum shelf wobbler, adhesive at both ends. 1:1 70 mm LPM 005-03 150 mm LPM 007-03 14.08 EUR / 100PCS 53.9 EUR / 100PCS Stopper with spring, sole with scanning rail fastening, label holder clamp. Colors: white. LPX 027-03 72.05 EUR / 100PCS Shelf wobbler of white plastified aluminum, with two double adhesive foam pads, total length 95 mm. LPM 056-03 18.59 EUR / 100PCS PVC shelf wobbler, thickness 0,25 mm, width 15 mm, adhesive at both ends. Colors: clear. 150 mm LPP 021-434 200 mm LPP 022-434 5.44 EUR / 100PCS 7.48 EUR / 100PCS 71 71
K super gripper, allows the 90 positioning with adjustable angle of the prints with a maximum thickness of 2 mm. Colors: clear. PPX 080-01 47.63 EUR / 100PCS T super gripper for the 90 exhibiting of the prints with a maximum thickness of 2 mm. Fixing on label holder profiles. Colors: clear. PPX 020-03 22.0 EUR / 100PCS Flexible super gripper 75 mm length, fixed on a magnetic base. Allows displaying of the prints with a maximum thickness of 2 mm perpendicular to the shelf. PPX 082-01 3.22 EUR / PC Supper gripper to be attached on any CLICK accessory. Allows displaying of prints with a maximum thickness of 2 mm. Colors: clear. PPX 081-01 17.6 EUR / 100PCS Stainless steel clamp for 90 display on the 39 mm label holder. The print fixing is stronger than using similar plastic items. LPM 224-01 30.8 EUR / 100PCS Parallel hinged super gripper with fixing on the label holder profiles and display of the prints of max 2 mm parallel to the shelf. Colors: clear. length 25 mm PPX 018-03 length 75 mm PPX 019-03 25.74 EUR / 100PCS 67.1 EUR / 100PCS Arm for gravitational stoppers. Can be fastened on magnets, clamps or on other CLICK accessories and can display frames and shark foot supports. Magnet with spacer and CLICK connector specially designed for the posting of the shelf stoppers. RAP 158-01 1.21 E U R / P C Short arm, 63 mm RAP 259-01 0.4 4 E U R / P C Long arm, 85 mm, min 500 pcs RAP 260-01 0.55 EUR / PC Clamp with CLICK connector used at the fixing of the stoppers on wire structures. FAP 065-01 0.4 4 E U R / P C 72 72
Stopper with 63 mm magnetic arm and clear label holder. Maximum magnet load 5,6 kg. Laber holder features: working length 35 mm, working thickness 0,5 mm. LPP 064-01/63 Stopper with 85 mm magnetic arm and clear label holder. Maximum magnet load 5,6 kg. Laber holder features: working length 35 mm, working thickness 0,5 mm. LPP 064-01/85 2.0 9 E U R / P C 2.31 E U R / P C Magnetic shark foot for PVC prints or pockets with three holes. Maximum magnet load: 18 kg, Ø of the magnet 47 mm. To be used with LAP 042, 043 or 049 pockets. Colors: clear, min 3000 pcs. LPP 200-01 2.53 EUR / PC Shark foot fastened with plastic clamps, distance between clamps 25 mm. The two different clamp models are suitable for certain shelf types. The clips are included. To be used with LAP 042, 043 or 049 pockets. Colors: clear. for CEFLA shelves, with holes Ø 7 mm LPP 203-01 0.8 EU R / PC for HERMES-METALL-YUDIGAR and KIDER shelves with rectangular holes 5 x 10 mm or rhomboidal holes 5 x 5 mm LPP 204-01 0.8 E U R / P C Stopper with 63 mm magnetic arm and frame. Due to the gravitational system, the frame come back to its initial position, perpendicular on the shelf, after it was moved. Colors for the frame: white, red and grey. with A5 landscape frame RPP 041-01/L with A5 portrait frame RPP 041-01/P with A6 landscape frame RPP 042-01/L with A6 portrait frame RPP 043-01/P with short arm, 63 mm LPP 201-01 with long arm, 85 mm LPP 202-01 2.97 E U R / P C 3.08 EUR / PC 2.64 E U R / P C 2.64 E U R / P C Shark foot with magnetic arm and gravitational system which helps the print to come in the initial position, perpendicular on the shelf, after it was moved. Maximum magnet load - 5,6 kg. To be used with LAP 042, 043 or 049 pockets. Colors: clear. 2.2 E U R / P C 2.31 E U R / P C Shark foot with suction cup Ø 36 mm for PVC prints or pockets with 3 holes. To be used with LAP 042, 043 or 049 pockets. Colors: clear. LPP 199-01 2.0 9 EU R / PC Shark foot with fixing on PRIMA 1 and PRIMA 2 divider systems, with 60 and 120 mm height. Colors: clear. LPP 206-01 0.4 4 E U R / P C Shark foot with fixing on CLICK accessories. To be used with LAP 042, 043 or 049 pockets. Colors: clear. LPP 205-01 0.4 4 E U R / P C 73 73
Posting stand with hinged magnet and L aluminium tube with the long arm of 250 mm, having 2 clear/grey hooks, for the print hanging, and the end cap. LPX 017-00 4.49 EUR / PC Flag support with horizontal aluminium arm to be attached with 2 magnets, on the uprights. Dimensions: 300 x 300 mm. The flag itself is suspended to the arm with 2 clear sliding hooks- included. Color: aluminium. LPX 047-01/300 9.0 E U R / P C Adhesive 90 flag base, for Ø 18,5 mm tube 50x115 mm. Colors: white. LAP 007-44 1.0 6 E U R / P C PVC pocket with 3 holes for posting on the shark foot. Colors: clear. 200x200 mm. LAP 043-00 0.84 EU R / PC 150x210 mm, portrait LAP 049-00 130x130 mm LAP 042-00 Flag support consisting of a telescopic horizontal aluminium tube with 2 transparent/grey swivel hooks for hanging of the print and with fixing on the upright with an universal claw. Adhesive 60 flag base for Ø 18,5 mm tube, 50x115 mm. Colors: white. LAP 014-44 0.7 3 E U R / P C 0.64 E U R / P C tube length: 400-800 mm LPM 055-00 8.5 8 EU R / PC tube length: 500-1000 mm LPM 059-00 9.6 EU R / PC 1.0 6 E U R / P C Adhesive 75 flag base for Ø 18,5 mm tube, 50x115 mm. Colors: white. LAP 015-44 1.0 6 E U R / P C Plastic tube Ø 18.5 mm, length 700 mm. Colors: white. LAP 008-44 1.2 8 E U R / P C Plastic tube Ø 18.5 mm, length 700 mm, with longitudinal slit for the inserting of prints. Colors: white. LAP 009-44 1.2 8 E U R / P C End cap for Ø 18,5 mm tube. Colors: white, red, green, blue, yellow and black. LAP 033-44 0.22 EUR / PC Fixing ring for Ø 18,5 mm tubes. Colors: white, red, green, blue, yellow and black. LAP 034-44 0.22 EUR / PC Flag with adhesive fixing stand and clear PVC pocket. Inclination towards the vertical: 75. Colors for the tube and the stand: white. Colors for the cork and the stopper: red, green, blue, yellow. Portrait A3 pocket LPP 024-44 Landscape A3 pocket LPP 025-44 11.96 EUR / PC 14.33 EUR / PC 74 74
Tube with 7 mm external diameter, 1000 mm length, mostly used for small stands and miniflags construction. Colors: white, black. LAP 050-44 no longitudinal cutting 0.7 EU R / PC LAP 050A-44 with longitudinal cutting 0.7 EU R / PC LAP 012-44 end cap for tubes with Ø 7 mm. Available colors: black, white. 8.4 EUR / 100PCS Adhesive adapter foot to be inserted into 7 mm diameter rods. Used mostly in small stands and miniflags construction. Adhesive foot dimensions: 30 x 20 mm. Colors: white. LAP 014-44/7 60 inclination 0.36 EUR / PC LAP 007-44/7 horizontal, 90 0.36 EUR / PC Print pocket, with elastic joint and clamping on the scanning rail, parallel to the shelf. It has two gravity pockets: one for labels of 39 mm height and the other for 106 mm label heights, 100 mm length, min 500 m. Hinged sharkfoot holder in clear plastic to be fastened on the shelf with a metallic G-clamp. The sharkfoot holder can take perforated rigid flags and is always coming back to it`s vertical position thanks to the gravity hinge. LPX 040-00 2.6 E U R / P C PPE 226-27/0100 32.4 EUR / 100PCS Hinged accessory for fixing of prints or PVC pockets parallel to the shelf. It is clamped onto the label holder, length 100 mm, min 500 m. PAE 007-27/0100 10.13 EUR / 100PCS Print pocket, with elastic joint and clamping on the scanning rail, parallel to the shelf. There is a front 8 mm height front on top. print height: 53 mm, 100 mm length, min 500 m PPE 127-27/0100 14.4 EUR / 100PCS print height: 76 mm, 100 mm length, min 500 m PPE 128-27/0100 16.92 EUR / 100PCS Print pocket, with elastic joint and clamping on the scanning rail, parallel to the shelf. print height: 76 mm, 100 mm length, min 500 m PPE 126-27/0100 19.44 EUR / 100PCS print height: 105 mm, 100 mm length, min 500 m PPE 126A-27/0100 22.44 EUR / 100PCS Print pocket, riding on the label holder, with an elastic joint at the upper part, parallel to the shelf. Print height: 73 mm, total dimension 73x110 mm, min 1000 pcs. PPE 061-27/0110 25.71 EUR / 100PCS 75 75
Compact and durable, our MINI ROLL UP system comes fully assembled and ready to mount. The Header and Shade are all custom printed with your product information or promotional message. The pull down shade is printed on wear and tear resistant material, it can withstand with thousands of pulls, the header is laminated for durability as well. The header can take different shapes or sizes for quntities higher than 500 pcs. Afer viewing, the shade automatically retracts to create a sleek and compact unit ready for the next customer.the prices can vary from a quantity to another, if your inquiry is different than the quantities presented below please don t hesitate to email us at info@ artmatch.net. Delivery time for this range of products is 4 weeks. Available colors: black and white. LPE 012-573/M Mini roll up system 130 mm, with print sizes of 88,9x311,2 mm. The header is laminated for a good resistance in time, and has 95x55 mm. LPE 012-573/S Mini roll up system 165 mm, with print sizes of 123,8x311,2 mm. The header is laminated for a good resistance in time, and has 130x75 mm. LPE 012-573/L Mini roll up system 257 mm, with print sizes of 216x336,6 mm. The header is laminated for a good resistance in time, and has 220x75 mm. for 100 pcs 3 3.7 5 E U R / P C for 100 pcs 35.91 EUR / PC for 100 pcs 4 4.91 E U R / P C for 500 pcs 16.11 E U R / P C for 500 pcs 16.65 EUR / PC for 500 pcs 2 3.31 E U R / P C for 1000 pcs 12.9 6 E U R / P C for 1000 pcs 13.5 E U R / P C for 1000 pcs 2 0.7 E U R / P C 76 76
77 77
78 78