AC701 Ethernet Design Creation June 2014 XTP223
Revision History Date Version Description 06/09/14 8.0 Regenerated for 2014.2. 04/16/14 6.0 Regenerated for 2014.1. 12/18/13 5.0 Regenerated for 2013.4. 10/23/13 4.0 Regenerated for 2013.3. 06/19/13 3.0 Regenerated for 2013.2. AR55738 fixed. 04/03/13 2.0 Regenerated for 2013.1. AR54163 and AR54165 fixed. Added AR55738. 02/04/13 1.1 As per AR54044, added 2012.4 device pack. Added AR54163, AR54165, and AR54223. 12/18/12 1.0 Initial version. Copyright 2014 Xilinx, Inc. All Rights Reserved. XILINX, the Xilinx logo, the Brand Window and other designated brands included herein are trademarks of Xilinx, Inc. All other trademarks are the property of their respective owners. NOTICE OF DISCLAIMER: The information disclosed to you hereunder (the Information ) is provided AS-IS with no warranty of any kind, express or implied. Xilinx does not assume any liability arising from your use of the Information. You are responsible for obtaining any rights you may require for your use of this Information. Xilinx reserves the right to make changes, at any time, to the Information without notice and at its sole discretion. Xilinx assumes no obligation to correct any errors contained in the Information or to advise you of any corrections or updates. Xilinx expressly disclaims any liability in connection with technical support or assistance that may be provided to you in connection with the Information. XILINX MAKES NO OTHER WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, REGARDING THE INFORMATION, INCLUDING ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT OF THIRD-PARTY RIGHTS.
Note: This presentation applies to the AC701 Overview AC701 Board AC701 Setup Generate RGMII Ethernet Example Design Modifications to Example Design Compile Example Design Run RGMII Ethernet Example Design References
Artix-7 Ethernet Capability AC701 Supports RGMII Capability RGMII demonstrated in this tutorial Board TX to Host LogiCORE Ethernet Example Design RDF0221 - AC701 Ethernet Design Files (2014.2 C) zip file Available through http://www.xilinx.com/ac701 LogiCORE IP Tri-Mode Ethernet MAC See PG051 for details
Xilinx AC701 Board
Vivado Software Requirements Xilinx Vivado Design Suite 2014.2, Design Edition
IP License Requirements IP licenses are needed to compile the design in this tutorial: LogiCORE, Ethernet AVB Endpoint, Evaluation License LogiCORE, Tri-Mode Ethernet MAC, Evaluation License LogiCORE, Tri-Mode Ethernet Media Access Controller, Evaluation License Available free of charge at http://www.xilinx.com/getlicense
Wireshark Software Requirement Wireshark Protocol Analyzer available at http://www.wireshark.org/
Generate Ethernet Example Design Open Vivado Start All Programs Xilinx Design Tools Vivado 2014.2 Vivado Select Create New Project
Generate Ethernet Example Design Click Next
Generate Ethernet Example Design Set the Project name and location to ac701_ethernet and C:/ Check Create Project Subdirectory
Generate Ethernet Example Design Select RTL Project Select Do not specify sources at this time
Generate Ethernet Example Design Select the AC701 Board
Generate Ethernet Example Design Click Finish
Generate Ethernet Example Design Click on IP Catalog
Generate Ethernet Example Design Select Tri Mode Ethernet MAC v8.2 under Communication & Networking
Generate Ethernet Example Design Right click on Tri Mode Ethernet MAC Select Customize IP
Generate Ethernet Example Design Make the following settings Set Component Name: ac701_ethernet_rg mii Select Generate Board based IO Constraints Set the Board Interfaces: ETHERNET: rgmii MDIO: mdio io Click Interface Tab
Generate Ethernet Example Design Make the following settings Select Tri speed Click Features Tab
Generate Ethernet Example Design Make the following settings De-select Half Duplex, AVB, Frame Filter, and Statistics Counters Click OK
Generate Ethernet Example Design Click Generate
Generate Ethernet Example Design Ethernet design appears in Design Sources Wait until checkmark appears on ac701_ethernet_rgmii_synth_1
Compile Example Design Right click on ac701_ethernet_rgmii and Open IP Example Design
Note: The original project window can be closed Compile Example Design A new project is created under <design path>/example_project Click on Generate Bitstream
Compile Example Design Open and view Implemented Design
Setup for the AC701 Designs Connect a USB Type-A to Micro-B cable to the USB JTAG (Digilent) connector on the AC701 board Connect this cable to your PC Power on the AC701 board
Setup for the AC701 Designs Connect a Ethernet cable to the AC701 Connect this cable to your PC
AC701 Setup Set S2 to 1100 (1 = on, Position 1 Position 4) This selects Gigabit Ethernet, with the packet generator off
Run Ethernet Example Design Click Open Hardware Manager
Run Ethernet Example Design Click Open New Hardware Target
Run Ethernet Example Design Click Next
Run Ethernet Example Design Click Next
Run Ethernet Example Design Click Next
Run Ethernet Example Design Click Finish
Run Ethernet Example Design Select Program device xc7a200t_0
Run Ethernet Example Design The newly created bitstream is default Click Program
Run Ethernet Example Design Open Wireshark Set the Filter to: eth.addr == da:01:02:03:04:05; click Apply Select the Ethernet NIC and click Start
Run Ethernet Example Design Open your Network and Sharing Center control panel Click on Change adapter settings
Run Ethernet Example Design Right click on the Gigabit network connection and select Status The status dialog will show you the speed and number of packets
Run Ethernet Example Design Wireshark should show no packets
Run Ethernet Example Design Set S2 to 1110 (1 = on, Position 1 Position 4) for a moment to run the packet generator Set S2 back to 1100
Run Ethernet Example Design The status dialog shows a few packets received
Run Ethernet Example Design Wireshark captures and displays the actual packets
Run Ethernet Example Design Use the arrow keys to move to the next packet
Run Ethernet Example Design Viewing several packets, you can see a simple changing pattern
References
References Tri-Mode Ethernet Media Access Controller Tri-Mode Ethernet MAC Product Overview http://www.xilinx.com/products/intellectual-property/temac.htm LogiCORE IP Tri-Mode Ethernet MAC Product Guide PG051 http://www.xilinx.com/support/documentation/ip_documentation/ tri_mode_ethernet_mac/v8_2/pg051-tri-mode-eth-mac.pdf
Documentation
Documentation Artix-7 Artix-7 FPGA Family http://www.xilinx.com/products/silicon-devices/fpga/artix-7/index.htm Design Advisory Master Answer Record for Artix-7 FPGAs http://www.xilinx.com/support/answers/51456.htm AC701 Documentation Artix-7 FPGA AC701 Evaluation Kit http://www.xilinx.com/products/boards-and-kits/ek-a7-ac701-g.htm AC701 Getting Started Guide http://www.xilinx.com/support/documentation/boards_and_kits/ac701/2014_1/ ug967-ac701-eval-kit-getting-started.pdf AC701 User Guide http://www.xilinx.com/support/documentation/boards_and_kits/ ac701/ug952-ac701-a7-eval-bd.pdf