A clear edge for your logistics. Omni-directional bar-code reading systems. P R O D U C T I N F O R M A T I O N
OPS: the forward-looking complete solution Goods identification with one system, taking new paths. The OPS omni-directional reading system. You want to optimise your transport and information logistics processes. With SICK's OPS Omni Portal System you have a bar-code reading system that meets the most modern logistical demands. OPS the omni-directional reading system from SICK is a technically optimised complete system for identifying bar codes on goods and other articles. The use of individual scanners allows the realisation of the ideal configuration for your application. Over 400 installations worldwide testify to the reliability and efficiency of OPS. Par Even difficult-to-read and dirty bar-codes are reliably detected by SMART code-recognition technology. OPS 290 A single source for implemeting your plant saves you time and money. OPS 490 THE OPS ADVANTAGES AT A GLANCE: Modular concept allows individual adaptation to your application Excellent performance Real-time Autofocus feature without additional components to detect distances of objects Uses CLV 490 high-end scanning and/or CLX 490 compact OMNI scanners Parameters that can be saved in the scanner plug-ins and quick clamping devices make it easy to exchange individual units A variety of bus connection modules can be integrated High operational reliability High cost-effectiveness THE CLV 490 BARCODE SCANNER*): Integrated decoder with real-time decoding Real-time autofocus function SMART code recognition Very high depth sharpness, even for module with small width Tilt-independent from 45 to +45 Scanning rate of up to 1,200 Hz No maintenance Low energy requirement: typically 9 W High enclosure rating of IP 65 Laser Class 2 Smallest size in the high-end range Low weight *) See CLV 490 Product Information for detailed information The high-end CLV 490 barcode Logi scanner with autofocus function.
OPS: as individual as your application A system to meet all demands. Postal Application-specific configuration. service The OPS can be precisely adapted to its application thanks to the good performance of the CLV 490 barcode scanners, and the potential for ideal system configuration by varying the number and position of the scanners. cel sorting The OTS/OTC evaluation unit: Acquired bar-code information is transferred to a host online. THE OTS/OTC EVALUATION UNIT AND ITS TASKS: Processing read-gate and path information (tracking) Control of bar-code scanner focus and reading Evaluation and filtering of individual read results Assignment of bar-code information to objects Communication with the host Provision of switching outputs Running statistical analyses Monitoring the system Indicating system status stics
CLX 490 powerful by itself too! CLX 490: The all-in-one solution for your E-business. Get your logistics in shape for the Internet business of tomorrow. As markets become more and more deeply involved in the Internet, and demands for speed and quality increase, logistics solutions that can keep pace are in demand. SICK solutions like the compact OMNI scanner ensure that your logistics will keep up with the market demands of the future. SICK is your best source for electronic commerce equipment. Because SICK provides the technology requirements for your E-logistics concepts of tomorrow.. CLX 490 compact OMNI scanner. CLX 490 COMPACT-OMNI-SCANNER: Efficient and economical SICK solutions can be used in document handling, for example. Identical scanning frequency and decoding output to the CLV 490 barcode scanner Real-time Autofocus feature and processing of read-gate and path information (tracking) in stand-alone applications Barcode scanners can be used in an Omni Portal System, e.g. as additional side scanners. Read field height 0.3 mm 0.35 mm 0.5 mm Read conditions: Test code code 128 Print contrast > 90 % Ambient light < 2000 lx Tilt: Omni-directional Pitch: 15... +15 Skew: 15... +15 Read distance
CLX 490 facts and figures CLX 490 compact-omni-scanner Scanner design X scanner (2 lines offset from each other at a 90 angle) Light source Laser diode, red light (λ = 650 nm) Laser class 2 (acc. to EN 60825-1) Ambient light compatibility 2000 lx (on barcode) Scanning frequency 600 1,200 Hz Operation and parameterization With Windows-like user interface "CLV setup or command strings Displays 4 LED status displays Data interfaces Host: RS 232, RS 422/485; terminal: RS 232 Switch inputs/outputs 6 x IN / 4 x OUT Operating voltage 18 30 V DC Power consumption Typically 9 W, max. 16 W Electrical connection 2 x 15-pin D-Sub HD plugs Housing Aluminum die cast Enclosure rating IP 65 (acc. to DIN 40050) Protection class Class 3 (acc. to VDE 0106) EMC test Acc. to IEC 801 Weight Approx. 2.0 kg Temperature (operating/storage) 0... +40 C/ 20... +70 C All figures in mm Makes it easy to exchange devices: All parameters are stored in the connection plug.
Facts and figures OTS/OTC Technical data Typ OTS OTC No. of bar codes per object max. 20 (with max. 4 scanners) No. of objects per reading field max. 15 (autodiscriminating) Types of bar codes code 39, code 128, code 93, codabar, EAN, EAN 128, UPC, 2/5 interleaved Length of bar codes max. 50 characters (max. 600 characters over all bar codes per read gate) Print ratio 2:1... 3:1 No. of multiple readings 1... 99 Optical indicators 26 LED status and function indicators Read cycle switching outputs "trigger 1, 2 and 3" / software trigger (host interface) "Host" data interface RS 232 or RS 422/485, data output format adjustable, optional bus connection Data transfer rate 300... 57,600 bit/s Protocols SICK Standard, SICK-CLX Network, 3964(R)/RK 512/Crisplant S 2000 Physical configurations stand-alone, network (bus), daisy chain (pass-through or master/slave) "Terminal" data interface RS 232, 9,600 bit/s, 8 data bits, no parity, 1 stop bit, fixed output format Function-switching inputs 16 (all inputs are visualised by LEDs opto-uncoupled, Uimax = +30 V, reverse-polarity protected) "trigger 1... 3", "path increment 1... 2, "sensor 1-1... 1-7", "sensor 2-1... 2-4" Function-switching outputs 4 ("outputs 1... 4") PNP, Iomax = 30 ma, short-circuit protected, adjustable impulse length (10... 990 ms / 100... 9,900 ms), selectable result indicator function 1 ("relay output") 24 V DC; max. 1.5 A; 250 V DC; max. 0.2 A; 250 V AC; max 1.5 A; adjustable input length (10 990 ms / 100 9,900 ms), selectable result indicator function Electrical connections 1 x AUX connection (9-pin D-sub HD plug for diagnosis, serial) 1 x CAN connection (9-pin D-sub HD socket Operating voltage 230 V AC (115 V AC) 15 % / +10 % 24 V +20 % / 10 % Housing sheet steel, lacquered, reading window made of PC Aluminium cont. cast profile Enclosure rating IP 65 (acc. to DIN 40 050) IP 20 Protection class Class 3 (acc. to VDE 0106 / IEC 1010-1) EMC/vibration/shock tests acc. to EN 55011, EN 50082-1, EN 50082-2 / acc. to IEC 68-2-6 test FC / acc. to IEC 68-2-27 test EA Weight approx. 10.3 kg (inc. power supply unit and automatic fuse) approx. 1.3 kg Ambient operating/ 0 +50 C / 25 +70 C storage temp. Max. relative humidity 90 %, non-condensing Standard configurations OPS 290 2 CLV 490 line scanners 45 to transport direction OPS 490 4 CLV 490 line scanners 45 to transport direction Scanning rate: 1,200 Hz per scanning line Cover for 0.35 0.5 mm: Width: 1,500 mm Height: 800 mm Speed: 3 m/s Scanning rate: 1,200 Hz per scanning line Cover for 0.35 0.5 mm: Width/Height: 800 mm Speed: 3 m/s
For smooth through-put. Meet the increasingly complex demands of logistics, material flow and conveyor technology reliably and cost-effectively: OPS from SICK. SICK. Where everything is unified. Shorter through-put times and reduced manual processes this is what you expect from an efficient reading system. SICK is one of the few producers that offer all embracing solutions: turn-key systems from electronics, photoelectric switches and evaluation software, to commissioning and world-wide service. If desired, we also support your project planning as well as the engineering of your plant. Your project is accompanied by one contact who is responsible and who is available to you throughout the entire length of the project. Warehousing SICK systems. An all-embracing concept. Software and hardware from a single source Naturally, a project leader provides support Supplementary performance: engineering support All project processes are certified according to ISO 9001 OPS is quickly and economically adapted to any application. All conventional bar codes can be read. actory- Automation SICK stands for decades of experience in material flow, and a comprehensive range of services.
Interested? Copy, Fill In and Fax Back. F a x R e p l y Company Name Position/ Department Address Post code/ Town Phone/Fax Industry/Field of application Yes, I would like to know more about omni-directional reading systems. I am interested in a detailed consultation with one of your project consultants. Please arrange an appointment for me. Your contacts: Australia Phone +61 3 949741 00 008 334802 toll free Fax +61 3 9497 11 87 Austria Phone +43 22 36 62 28 80 Fax +432236622885 Finland Phone +358 97 28 85 00 Fax +358 972885055 France Phone +33 1 6462 35 00 Fax +33 1 6462 35 77 Germany Phone +49 21 15 30 10 Fax +49 21 15 30 11 00 Poland Phone +48 2 28 37 40 50 Fax +48 2 28 37 43 88 Singapore Phone +65 744 37 32 Fax +65 841 7747 Spain Phone +34 9 34 80 31 00 Fax +34 9 34 73 44 69 w w w. s i c k. d e Belgium/Luxembourg Phone +32 2466 55 66 Fax +32 2463 35 07 Laser Measurement Systems: Tel. +32 92 2403 94 Fax +32 92 23 56 45 Brazil Phone +55 11 55 61 26 83 Fax +55 11 55 35 41 53 China/Hong Kong Phone +852 27 63 69 66 Fax +852 27 63 63 11 Czech Republic Phone +42 02 57 81 05 61 Fax +42 02 57 81 05 59 Denmark Phone +45 45 82 64 00 Fax +45 458264 01 Great Britain Phone +44 17 27 83 11 21 Fax +44 17 27 85 67 67 Italy Phone +39 02 92 1420 62 Fax +39 02 92 1420 67 Japan Phone +81 3 33 58 13 41 Fax +81 333 58 05 86 Netherlands Phone +31 3 02 29 25 44 Fax +31 3 02 29 39 94 Laser Measurement Systems: Tel. +31 7 35 99 50 44 Fax +31 7 35 99 4718 Norway Phone +47 67 81 50-0 Fax +47 67 81 50-01 SICK AG Auto Ident Nimburger Straße 11 D-79276 Reute Sweden Phone +46 86 80 64 50 Fax +46 87 10 18 75 Switzerland Phone +41 4 16 19 29 39 Fax +41 4 16 19 29 21 Taiwan Phone +886 2 23 65 62 92 Fax +886 2 23 68 73 97 USA Phone +1 (952) 9 41 67 80 Fax +1 (952) 9 41 92 87 Branch offices and representatives in all major industrial countries. 8 008 950/04-01/MRH.FD. Printed in Germany. Änderungen vorbehalten. PreD3105