Highlight Nte Lab Answer Key: Mdule 1: Deplying and Managing Windws Server 2012 Lab: Deplying and Managing Windws Server 201 2 Exercise 1: Deplying Windws Server 2012 10. In the Windws Setup Wizard, n the Windws Server 2012 R2 page, verify the fllwing settings, an Task 1: Install the Windws Server 2012 R2 server 1. Open the Hyper-V Manager cnsle. 2. Click 20410D-LON-SVR3. 3. In the Actins pane, click Settings. 4. Under Hardware, click DVD Drive. 5. Click Image file, and then click Brwse. 6. Brwse t D:\Prgram Files\Micrsft Learning\20410\Drives, and then click Windws2012R2RT 7. Click Open, and then click OK. 8. In the Hyper-V Manager cnsle, duble-click 20410D-LON-SVR3. 9. In the Virtual Machine Cnnectin Windw, in the Actin menu, click Start. Language t install: English (United States) Time and currency frmat: English (United States) Keybard r input methd: US 11. On the Windws Server 2012 R2 page, click Install nw. 12. On the Select the perating system yu want t install page, select Windws Server 2012 R2 D (Server with a GUI), and then click Next. 13. On the License terms page, review the perating system license terms, select the I accept the licen 14. On the Which type f installatin d yu want? page, click Custm: Install Windws nly (adva 15. On the Where d yu want t install Windws? page, verify that Drive 0 Unallcated Space has, and then click Next. Nte: Depending n the speed f the equipment, the installatin takes apprximately 20 minutes. The 16. On the Settings page, in bth the Passwrd and Reenter passwrd bxes, enter the passwrd Pa$$ Task 2: Change the server name 1. Sign in t LON-SVR3 as Administratr with the passwrd Pa$$w0rd. 2. In Server Manager, click Lcal Server.
(TCP/IPv4) Prperties dialg bx, click Use the fllwing IP address, enter the fllwing IP addres 3. Click the randmly generated name next t Cmputer name. 4. In the System Prperties dialg bx, n the Cmputer Name tab, click Change. 5. In the Cmputer Name/Dmain Changes dialg bx, in the Cmputer name text bx, enter the na 6. In the Cmputer Name/Dmain Changes dialg bx, click OK. 7. Clse the System Prperties dialg bx. 8. In the Micrsft Windws dialg bx, click Restart Nw. Task 3: Change the date and time 1. Sign in t server LON-SVR3 as Administratr with the passwrd Pa$$w0rd. 2. On the taskbar, click the time display. A pp-up windw with a calendar and a clck appears. 3. In the pp-up windw, click Change date and time settings. 4. In the Date and Time dialg bx, click Change Time Zne. 5. In the Time Zne Settings dialg bx, set the time zne t yur current time zne, and then click OK 6. In the Date and Time dialg bx, click Change Date and Time. 7. Verify that the date and time that display in the Date and Time Settings dialg bx match thse in y 8. T clse the Date and Time dialg bx, click OK. Task 4: Cnfigure the netwrk 1. On LON-SVR3, in the Server Manager cnsle, click Lcal Server. 2. In the Server Manager cnsle, next t Ethernet, click IPv4 address assigned by DHCP, IPv6 Enab 3. In the Netwrk Cnnectins dialg bx, right-click Ethernet, and then click Prperties. 4. In the Ethernet Prperties dialg bx, click Internet Prtcl Versin 4 (TCP/IPv4), and then click 5. In the Internet Prtcl Versin 4 IP address: 172.16.0.101 Subnet Mask: 255.255.0.0 Default Gateway: 172.16.0.1 Preferred DNS server: 172.16.0.10 6. Click Clse t clse the Ethernet Prperties dialg bx. 7. Clse the Netwrk Cnnectins dialg bx. Task 5: Add the server t the dmain 1. On LON-SVR3, in the Server Manager cnsle, click Lcal Server. 2. Next t Wrkgrup, click WORKGROUP. 3. In the System Prperties dialg bx, n the Cmputer Name tab, click Change. 4. In the Cmputer Name/Dmain Changes dialg bx, in the Member Of area, click the Dmain pti 5. In the Dmain bx, type adatum.cm, and then click OK.
6. In the Windws Security dialg bx, enter the fllwing details, and then click OK: Username: Administratr Passwrd: Pa$$w0rd 7. In the Cmputer Name/Dmain Changes dialg bx, click OK. 8. When infrmed that yu must restart the cmputer t apply the changes, click OK. 9. In the System Prperties dialg bx, click Clse. 10. In the Micrsft Windws dialg bx, click Restart Nw. 11. After LON-SVR3 restarts, sign in as Adatum\Administratr with the passwrd Pa$$w0rd. Results: After cmpleting this exercise, yu shuld have deplyed Windws Server 2012 n LON-SVR3. Yu als shuld have cnfigured LON-SVR3, including name change, date and tim e, and netwrking. Exercise 2: Cnfiguring Windws Server 2012 Server Cre Task 1: Set cmputer name 1. Sign in t LON-CORE as Administratr with the passwrd Pa$$w0rd. 2. At the cmmand prmpt, type scnfig.cmd and press Enter. 3. T select Cmputer Name, type 2, and then press Enter. 4. Enter the cmputer name LON-CORE, and then press Enter. 5. In the Restart dialg bx, click Yes. 6. Sign in t server LON-CORE using the Administratr accunt with the passwrd Pa$$w0rd. 7. At the cmmand prmpt, type hstname, and then press Enter t verify the cmputer s name. Task 2: Change the cmputer s date and time 1. Ensure yu are signed in t server LON-CORE as Administratr with the passwrd Pa$$w0rd. 2. At the cmmand prmpt, type scnfig.cmd, and then press Enter. 3. T select Date and Time, type 9, and then press Enter. 4. In the Date and Time dialg bx, click Change time zne. Set the time zne t the same time zne 5. In the Date and Time dialg bx, click Change Date and Time, and verify that the date and time m tw times. 6. In the Cmmand Prmpt windw, type 15, and then press Enter t exit Server Cnfiguratin. Task 3: Cnfigure the netwrk 1. Ensure that yu are signed in t server LON-CORE using the accunt Administratr and the passwrd 2. At the cmmand prmpt, type scnfig.cmd, and then press Enter. 3. T cnfigure Netwrk Settings, type 8, and then press Enter. 4. Type the index number f the netwrk adapter that yu want t cnfigure, and then press Enter.
5. On the Netwrk Adapter Settings page, type 1, and then press Enter. This sets the Netwrk Adapte 6. T select static IP address cnfiguratin, type S, and then press Enter. 7. At the Enter static IP address: prmpt, type 172.16.0.111, and then press Enter. 8. At the Enter subnet mask prmpt, type 255.255.0.0, and then press Enter. 9. At the Enter default gateway prmpt, type 172.16.0.1, and then press Enter. 10. On the Netwrk Adapter Settings page, type 2, and then press Enter. This cnfigures the DNS server address. 11. At the Enter new preferred DNS server prmpt, type 172.16.0.10, and then press Enter. 12. In the Netwrk Settings dialg bx, click OK. 13. T chse nt t cnfigure an alternate DNS server address, press Enter. 14. Type 4, and then press Enter t return t the main menu. 15. Type 15, and then press Enter t exit scnfig.cmd. 16. At the cmmand prmpt, type ping ln-dc1.adatum.cm t verify cnnectivity t the dmain cntr Task 4: Add the server t the dmain 1. Ensure that yu are signed in t server LON-CORE using the accunt Administratr with the passwr 2. At the cmmand prmpt, type scnfig.cmd, and then press Enter. 3. T switch t cnfigure Dmain/Wrkgrup, type 1, and then press Enter. 4. T jin a dmain, type D, and then press Enter. 5. At the Name f dmain t jin prmpt, type adatum.cm, and press Enter. 6. At the Specify an authrized dmain\user prmpt, type Adatum\Administratr, and then press E 7. At the Type the passwrd assciated with the dmain user prmpt, type Pa$$w0rd, and then p 8. At the Change Cmputer Name prmpt, click N. 9. In the Restart dialg bx, click Yes. 10. Sign in t server LON-CORE with the Adatum\Administratr accunt and the passwrd Pa$$w0rd. Results: After yu cmplete this exercise, yu shuld have cnfigured a Windws Server 20 12 Server Cre deplyment and verified the server s name. Exercise 3: Managing Servers Task 1: Create a server grup 1. Sign in t LON-DC1 with the Administratr accunt and the passwrd Pa$$w0rd. 2. In the Server Manager cnsle, click Dashbard, and then click Create a server grup. 3. In the Create Server Grup dialg bx, click the Active Directry tab, and then click Find Nw. 4. In the Server grup name bx, type LAB-1. 5. Use the arrw t add LON-CORE and LON-SVR3 t the server grup. Click OK t clse the Create Se
6. In the Server Manager cnsle, click LAB-1. Press and hld the Ctrl key, and then select bth LON-CO 7. Scrll dwn, and under the Perfrmance sectin, select bth LON-CORE and LON-SVR3. 8. Right-click LON-CORE, and then click Start Perfrmance Cunters. Task 2: Deply features and rles t bth servers 1. In Server Manager n LON-DC1, click LAB-1. 2. Scrll t the tp f the pane, right-click LON-CORE, and then click Add Rles and Features. 3. In the Add Rles and Features Wizard, click Next. 4. On the Select installatin type page, click Rle-based r feature-based installatin, and then c 5. On the Select destinatin server page, verify that LON-CORE.Adatum.cm is selected, and then c 6. On the Select server rles page, select Web Server (IIS), and then click Next. 7. On the Features page, select Windws Server Backup, and then click Next. 8. On the Web Server Rle (IIS) page, click Next. 9. On the Select rle services page, add the Windws Authenticatin rle service, and then click Ne 10. On the Cnfirm installatin selectins page, select the Restart the destinatin server autmat 11. Click Clse t clse the Add Rles and Features Wizard. 12. In Server Manager, right-click LON-SVR3, and then click Add Rles and Features. 13. In the Add Rles and Features Wizard, n the Befre yu begin page, Click Next. 14. On the Select installatin type page, click Rle-based r feature-based installatin. Click Next 15. On the Select destinatin server page, verify that LON-SVR3.Adatum.cm is selected, and then c 16. On the Server Rles page, click Next. 17. On the Select features page, click Windws Server Backup, and then click Next. 18. On the Cnfirm installatin selectins page, select the Restart the destinatin server autmat 19. Once the install cmmences, click Clse. 20. In Server Manager, refresh the view, click the IIS nde, and then verify that LON-CORE is listed. Task 3: Review services and change a service setting 1. Sign in t LON-CORE with the Adatum\Administratr accunt and the passwrd Pa$$w0rd. 2. In the Cmmand Prmpt windw, type the fllwing tw cmmands, and press Enter after each ne: netsh.exe advfirewall firewall set rule grup="remte desktp" new enable=yes netsh.exe advfirewall firewall set rule grup="remte event lg management" new enable=yes 3. Sign in t LON-DC1 with the Adatum\Administratr accunt and the passwrd Pa$$w0rd. 4. In Server Manager, click LAB-1. 5. Right-click LON-CORE, and then click Cmputer Management.
6. In the Cmputer Management cnsle, expand Services and Applicatins, and then click Services. 7. Right-click the Wrld Wide Web Publishing service, and then click Prperties. Verify that the Startu 8. In the Wrld Wide Web Publishing Service dialg bx, n the Lg On tab, verify that the service is 9. On the Recvery tab, cnfigure the fllwing settings, and then click the Restart Cmputer Optins First failure: Restart the Service Secnd failure: Restart the Service Subsequent failures: Restart the Cmputer Reset fail cunt after: 1 days Restart service after: 1 minute 10. In the Restart Cmputer Optins dialg bx, in the Restart Cmputer After bx, type 2, and then 11. Click OK t clse the Wrld Wide Web Publishing Services Prperties dialg bx. 12. Clse the Cmputer Management cnsle. Results: After yu cmplete this exercise, yu shuld have created a server grup, deplye d rles and features, and cnfigured the prperties f a service. Exercise 4: Using Windws PwerShell t Manage Servers Task 1: Use Windws PwerShell t cnnect remtely t servers and view infrmat in 1. Sign in t LON-DC1 with the Adatum\Administratr accunt and the passwrd Pa$$w0rd. 2. In the Server Manager cnsle, click LAB-1. 3. Right-click LON-CORE, and then click Windws PwerShell. 4. At the cmmand prmpt, type the fllwing, and then press Enter: Imprt-Mdule ServerManager 5. T review the rles and features installed n LON-CORE, at the cmmand prmpt, type the fllwing, a Get-WindwsFeature 6. T review the running services n LON-CORE, at the cmmand prmpt, type the fllwing, and then pre Get-service where-bject {$_.status -eq "Running"} 7. T view a list f prcesses n LON-CORE, at the cmmand prmpt, type the fllwing, and then press E Get-prcess 8. T review the IP addresses assigned t the server, at the cmmand prmpt, type the fllwing, and the Get-NetIPAddress Frmat-table 9. T review the mst recent 10 items in the security lg, at the cmmand prmpt, type the fllwing, an Get-EventLg Security -Newest 10
10. Clse Windws PwerShell. Task 2: Use Windws PwerShell t remtely install new features 1. On LON-DC1, n the taskbar, click the Windws PwerShell icn. 2. T verify that the XPS Viewer feature has nt been installed n LON-SVR3, type the fllwing cmmand Get-WindwsFeature -CmputerName LON-SVR3 3. T deply the XPS Viewer feature n LON-SVR3, type the fllwing cmmand, and then press Enter: Install-WindwsFeature XPS-Viewer -CmputerName LON-SVR3 4. T verify that the XPS Viewer feature has nw been deplyed n LON-SVR3, type the fllwing cmman Get-WindwsFeature -CmputerName LON-SVR3 5. In the Server Manager cnsle, frm the Tls drp-dwn menu, click Windws PwerShell ISE. 6. In the Windws PwerShell ISE windw, in the Untitled1.ps1 script pane, type the fllwing, pressing E Imprt-Mdule ServerManager Install-WindwsFeature WINS -CmputerName LON-SVR3 Install-WindwsFeature WINS -CmputerName LON-CORE 7. Click the Save icn. 8. Select the rt f Lcal Disk (C:). 9. Create a new flder named Scripts, and then save the script in that flder as InstallWins.ps1. 10. T run the script, press the F5 key. Results: After yu cmplete this exercise, yu shuld have used Windws PwerShell t perf rm a remte installatin f features n multiple servers. Prepare fr the next mdule After yu finish the lab, revert the virtual machines t their initial state by cmpleting the fl lwing steps: 1. On the hst cmputer, switch t the Hyper-V Manager cnsle. 2. In the Virtual Machines list, right-click 20410D-LON-DC1, and then click Revert. 3. In the Revert Virtual Machine dialg bx, click Revert. 4. Repeat steps 2 and 3 fr 20410D-LON-CORE and 20410D-LON-SVR3.